918M PDF
918M PDF
918M PDF
918M
COMPACT WHEEL LOADER
FEATURES:
Cat® Optimized Z-bar Loader Linkage – The Cat Optimized Z-bar Loader Tuned Drivetrain – Smooth shifting and powerful acceleration is
linkage combines the digging efficiency of a traditional Z-bar with tool matched with modulated hydrostatic braking in the inching/braking
carrier capabilities for great performance and versatility. With parallel pedal, creating a rhythm for material moving. Creeper and electronic
lift and high tilt forces throughout the working range you can safely engine speed control makes broom and snow blower work easy.
and confidently handle loads with precise control. Operator tunes between smooth or aggressive shifting with the
Work Tools – The 918M features the Cat exclusive, Performance
push of a button.
Series Buckets, as well as high visibility pallet forks. These tools
Cab – All around visibility is further enhanced with the availability
enhance productivity and are available with either an Integrated
of a rearview camera. The deluxe cab ensures operator comfort
Toolcarrier (IT) or ISO (wide) coupler style. Legacy coupler tools
with a heated, air suspension seat and easy to use controls. Available
such as brooms, grapple buckets, multi-purpose buckets and
features such as Implement and Hystat Aggressiveness, Ride Control,
other work tools remain compatible.
Lift and Tilt Kickouts, Engine Speed Control and Rimpull Control allow
Hydraulics and Controls – State of the art electro-hydraulic system the operator to customize the machine via a soft touch keypad.
provides low effort, fine control with fast cycle times. All-in-one Serviceability – Extended service intervals and excellent service access
joystick helps keep eyes on the work. Operator can adjust machine make daily checks quick and easy allowing you to get to work sooner.
responsiveness with the push of a button, which allows the operator Efficiently Powerful with its high full turn tipping loads, powerful
to set up the machine exactly the way they want it based on the breakout forces and increased engine power the M Series delivers
application. High Flow option allows for the use of even the most a balanced solution for all customer applications.
demanding work tools. Standard Fuel Savings Features such as Eco Mode, On Demand Cooling
Fan, and Auto Engine Idle Shutdown make the 918M both powerful and
fuel efficient.
Specifications
Buckets
Transmission
Bucket Capacities – General Purpose 1.3-1.9 m3 1.7-2.5 yd3 Forward and Reverse:
Low Range, Speed Range 1* 10 km/h 6.3 mph
Steering Low Range, Speed Range 2 20 km/h 12.5 mph
Steering Articulation Angle (each direction) 40 degrees High Range 40 km/h 25 mph
Maximum Flow – Steering Pump 82 L/min 21.7 gal/min *Creeper Control allows speed control from a stand still up to 10 km/h
Maximum Working Pressure – (6.3 mph). The Creeper Control will only work in Range 1.
Steering Pump 22 000 kPa 3,190 psi
Steering Cycle Times (full left to full right):
Tires
At 2,350 RPM: 90 RPM
steering wheel speed 2.3 seconds Standard Size 17.5-25 12PR
Number of Steering Wheel Turns – full left Other Choices Include: 17.5-25 12PR L2
to full right or full right to full left 3.4 turns 17.5-R25 XHA * L3
17.5-R25 * L2/L3 PC RM
Loader Hydraulic System 17.5-25 16PR L3, 3PC Rim
Maximum Flow – Implement Pump 165 L/min 43.6 gal/min 17.5-25 GY L2/L3
3rd Function, Maximum Flow, Standard 95 L/min 25 gal/min 17.5-25 12PR L2, SNOW
3rd Function, Maximum Flow, High 150 L/min 40 gal/min Flexport™
4rd Function, Maximum Flow 95 L/min 25 gal/min • Other tire choices are available. Contact your Cat dealer for details.
Maximum Working Pressure – • In certain applications, the loader’s productive capabilities may exceed
Implement Pump 28 000 kPa 4,061 psi the tire’s tonnes-km/h (ton-mph) capabilities.
Relief Pressure – Tilt Cylinder 32 000 kPa 4,641 psi • Caterpillar recommends that you consult a tire supplier to evaluate all
conditions before selecting a tire model.
3rd Function Relief Pressure 32 000 kPa 4,641 psi
4th Function Relief Pressure 32 000 kPa 4,641 psi
Cab
Hydraulic Cycle Times: ROPS SAE J1040 MAY94, ISO 3471-1994
Raise (ground level to maximum lift) 4.8 seconds FOPS SAE J/ISO 3449 APR98, Level II,
ISO 3449 1992 Level II
Dump (at maximum reach) 1.8 seconds
Rack Back 2.2 seconds • Cab and Rollover Protective Structures (ROPS) are standard in
Float Down (maximum lift to ground level) 2.7 seconds North America and Europe.
Total Cycle Time 11.5 seconds • The declared dynamic operator sound pressure levels per
ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note: All cycle times listed are with cylinder snubbing turned off. • The labelled sound power level for the CE marked configurations when
measured according to the test procedure and conditions specified in
Service Refill Capacities 2000/14/EC is 103 dB(A).
Fuel Tank 154.0 L 40.7 gal *The measurements were conducted with the cab doors and windows
closed.
Cooling System 21.5 L 5.7 gal
Engine Crankcase 8.8 L 2.3 gal
Axles:
Axles
Front 17 L 4.5 gal Front Fixed
Rear 17 L 4.5 gal Locking differential (standard)
Hydraulic System (including tank) 98.0 L 25.9 gal Rear Oscillating ±11 degrees
Hydraulic Tank 55.0 L 14.5 gal Locking differential (standard)
Transmission 3.4 L 0.9 gal
Diesel Exhaust Fluid (DEF) Tank 18.9 L 5.0 gal
• DEF used in Cat SCR systems must meet the requirements outlined in the
International Organization for Standardization (ISO) standard 22241-1.
Dimensions and Operating Specifications (All dimensions are approximate. Dimensions vary with bucket and tire choice.)
23
17
19
24 14
13 21
12
11 2
1 22
10
9
27
25
16
26 3
15 4
7 6
18
8
20
5
*Vary with bucket. **Vary with tire. Standard Lift – IT Standard Lift – ISO Standard Lift – PO
** 1 Height: Ground to Cab 3110 mm 10'2" 3110 mm 10'2" 3110 mm 10'2"
** 2 Height: Ground to Beacon 3300 mm 10'9" 3300 mm 10'9" 3300 mm 10'9"
** 3 Height: Ground Axle Center 640 mm 2'1" 640 mm 2'1" 640 mm 2'1"
** 4 Height: Ground Clearance 438 mm 1'5" 438 mm 1'5" 438 mm 1'5"
* 5 Length: Overall 6652 mm 21'9" 6708 mm 22'0" 6583 mm 21'7"
6 Length: Rear Axle to Bumper 1615 mm 5'3" 1615 mm 5'3" 1615 mm 5'3"
7 Length: Hitch to Front Axle 1350 mm 4'5" 1350 mm 4'5" 1350 mm 4'5"
8 Length: Wheel Base 2700 mm 8'10" 2700 mm 8'10" 2700 mm 8'10"
* 9 Clearance: Bucket at 45 degrees 2838 mm 9'3" 2800 mm 9'2" 2882 mm 9'5"
** 10 Clearance: Load over Height 3381 mm 11'1" 3381 mm 11'1" 3381 mm 11'1"
** 11 Clearance: Level Bucket 3562 mm 11'8" 3562 mm 11'8" 3563 mm 11'8"
** 12 Height: Bucket Pin 3818 mm 12'6" 3818 mm 12'6" 3818 mm 12'6"
** 13 Height: Overall 4847 mm 15'10" 4882 mm 16'0" 4825 mm 15'9"
* 14 Reach: Bucket at 45 degrees 933 mm 3'0" 974 mm 3'2" 881 mm 2'10"
15 Carry Height: Bucket Pin 353 mm 1'1" 345 mm 1'1" 353 mm 1'1"
** 16 Dig Depth 61 mm 2.4" 61 mm 2.4" 60 mm 2.3"
17 Width: Bucket 2401 mm 7'10" 2401 mm 7'10" 2401 mm 7'10"
18 Width: Tread Center 1800 mm 5'10" 1800 mm 5'10" 1800 mm 5'10"
19 Turning Radius: Over Bucket 5410 mm 17'8" 5425 mm 17'9" 5390 mm 17'8"
20 Width: Over Tires 2259 mm 7'4" 2259 mm 7'4" 2259 mm 7'4"
21 Turning Radius: Outside of Tires 4877 mm 16'0" 4877 mm 16'0" 4877 mm 16'0"
22 Turning Radius: Inside of Tires 2563 mm 8'5" 2563 mm 8'5" 2563 mm 8'5"
23 Rack Angle at Full Lift 55 degrees 55 degrees 55 degrees
24 Dump Angle at Full Lift 47 degrees 47 degrees 47 degrees
25 Rack Angle at Carry 44 degrees 44 degrees 44 degrees
26 Departure Angle 33 degrees 33 degrees 33 degrees
27 Articulation Angle 40 degrees 40 degrees 40 degrees
*Tipping Load – Straight (ISO 14397-1) 6903 kg 15,219 lb 6740 kg 14,859 lb 7272 kg 16,032 lb
*Tipping Load – Full Turn (ISO 14397-1) 5825 kg 12,837 lb 5681 kg 12,524 lb 6157 kg 13,574 lb
*Breakout Force 8480 kg 18,695 lb 7933 kg 17,489 lb 9113 kg 20,091 lb
*Operating Weight 9469 kg 20,876 lb 9491 kg 20,924 lb 9282 kg 20,463 lb
Dimensions listed are for a machine configured with general purpose bucket, bolt-on cutting edges, 80 kg (176 lb) operator, and 17.5 R25 (L2) tires.
3
918M Compact Wheel Loader
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
POWER TRAIN HYDRAULICS OPERATOR ENVIRONMENT
Secondary steering Three valve, single lever joystick ROPS/FOPS canopy or cab
Sound suppression, EU Prep Package Four valve, single lever joystick Premium heated, air suspension seat
Extreme temperature engine coolant High flow, third valve Heater and air conditioner
High speed option 40 km/h (25 mph) Feature Package: Road/Load/Road & Load.
918M tire options: ELECTRICAL Dependent on package selection, features
• 17.5-25 12PR L2 Halogen lights, front and rear included are:
• 17.5-R25 XHA * L3 LED work lights, front and rear • Adjustable Rimpull
• 17.5-R25 * L2/L3 PC RM Heavy duty battery package • Ride Control
• 17.5-25 16PR L3, 3PC Rim Work tool wiring harness • Adjustable Ground Speed Control
• 17.5-25 GY L2/L3 • Implement Modulation
• 17.5-25 12PR L2, SNOW FLUIDS • Hystat Aggressiveness
• Flexport™ Biodegradable hydraulic oil • Throttle Lock and Adjust
• Automatic Loader lift and bucket kickouts
LOADER END CHASSIS adjustable in cab
Integrated tool carrier coupler Lockable toolbox Cat radio (Bluetooth)
Wide (ISO) coupler Fenders, mud flaps Rear blind
Security system
Retractable seat belt 75 mm (3")
Rearview camera and screen (standard in EU)
Product Link™
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com AEHQ7803-01 (05-2016)
© 2016 Caterpillar
Replaces AEHQ7803
All rights reserved (EU, NACD)
Materials and specifications are subject to change without notice. Featured machines in photos may include additional
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well
as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.