Scribd Logo
Upload

Welcome to Scribd!

  • 718 views

    Technical Specification of Grills

    Uploaded by

    mishtinil
    This document discusses ventilation systems and components. It describes adjustable louvers grills with volume control dampers for supply air. It also describes supply air diffusers that can be circular or rectangular in shape, come in various gauges, and include a volume control damper. Return air grills are also summarized, noting they comprise horizontal fixed louvers made of MS sheet with vertical supports and an angle frame.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Technical Specification of Grills

    Uploaded by

    mishtinil
    718 views1 page
    This document discusses ventilation systems and components. It describes adjustable louvers grills with volume control dampers for supply air. It also describes supply air diffusers that can be circular or rectangular in shape, come in various gauges, and include a volume control damper. Return air grills are also summarized, noting they comprise horizontal fixed louvers made of MS sheet with vertical supports and an angle frame.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses ventilation systems and components. It describes adjustable louvers grills with volume control dampers for supply air. It also describes supply air diffusers that can be circular or rectangular in shape, come in various gauges, and include a volume control damper. Return air grills are also summarized, noting they comprise horizontal fixed louvers made of MS sheet with vertical supports and an angle frame.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    718 views1 page

    Technical Specification of Grills

    Uploaded by

    mishtinil
    This document discusses ventilation systems and components. It describes adjustable louvers grills with volume control dampers for supply air. It also describes supply air diffusers that can be circular or rectangular in shape, come in various gauges, and include a volume control damper. Return air grills are also summarized, noting they comprise horizontal fixed louvers made of MS sheet with vertical supports and an angle frame.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    VENTILATION SYSTEM

    Adjustable louvers grill (Supply air grill) with volume control damper

    1.25 mm MS sheet shall be used for the manufacture of grill. All grills shall be true to shape and
    shall be checked with a level gauge before being secured in position. No distortion or warping is
    permitted.

    All duct mounted grill shall be complete with rubber gaskets and flanged holding frames of
    suitable design for the intended installation. They shall be mounted on collar extending from the
    duct. No part of grilles shall project into the main duct. The adjustable louver grill shall be provided
    with volume control damper as well as double deflection flap / grill for direction control.

    AC SYSTEM

    Supply air diffuser with volume control damper

    Thickness of Grills, Diffuser, Damper shall be as follows: -

    (a) Frame : 16 gauge


    (b) Louvers : 18 gauge

    Supply air diffusers shall be circular / rectangular in shape as per detailed engineering
    requirement. The throat of a diffuser shall be connected with collar piece provided at the duct
    bottom for holding the diffuser as well as for supply of air. Each diffuser shall be provided with
    volume control damper. Each diffuser shall comprise of fixed plate, damper blade, damper blade
    operating knob, spindle, connecting rod etc. The diffuser should flush with the false ceiling. False
    ceiling shall not bear the load of any diffuser. The load of diffuser shall be borne by the duct and
    collar. Each diffuser shall be painted with appropriate colour to match with the colour of the false
    ceiling. Diffuser shall be placed considering light fittings position and false ceiling runner position.
    Diffusers / grills shall be of extruded aluminum powder coated / Anodized aluminum.

    Return air grill

    In general, the return air opening shall be provided above false ceiling in the wall between served
    premises and A.C. plant room. The return air grill of suitable size shall be provided at the A.C.
    plant room side face of the said opening for smooth flow of return air. The air supplied in the
    served premises shall come/return above false ceiling through the return air slit of 50~100 mm all
    around false ceiling along the walls of the served premises. From there it shall pass into the A.C.
    plant room through the return air passage.

    The return grill shall comprise of horizontal fixed louvers made of 2 mm thick MS sheet, 50x6 thick
    MS flat placed vertically at middle of the louvers, 50x50x6 size angle frame all around. Spacing of
    the fixed louvers in the grill shall be 25 mm.

    You might also like