Scribd
Upload
176 views2 pages

Commands Used in Smartfabric Os10 Cli Implementation Course

This document provides a list of commands used in the SmartFabric OS10 CLI course with examples of command syntax. It covers commands for licensing, switch modes, management, VLANs, interfaces, routing, security, users, and saving configurations. The list includes over 50 commands to configure, operate, and manage the SmartFabric OS10 switch through the CLI.

Uploaded by

sAuD huSSain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
176 views2 pages

Commands Used in Smartfabric Os10 Cli Implementation Course

This document provides a list of commands used in the SmartFabric OS10 CLI course with examples of command syntax. It covers commands for licensing, switch modes, management, VLANs, interfaces, routing, security, users, and saving configurations. The list includes over 50 commands to configure, operate, and manage the SmartFabric OS10 switch through the CLI.

Uploaded by

sAuD huSSain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SmartFabric OS10 CLI Commands

Commands used in SmartFabric OS10 CLI Implementation course:

Command Syntax Command Example


Licensing
show license status OS10# show license status
OS10# license install scp://user:[email protected]/0A900Q2-
license install [transfer method]
NOSEnterprise-License.xml
Switch operational modes
show switch-operating-mode OS10# show switch-operating-mode
switch-operating-mode [sfd | full-
OS10(config)# switch-operating-mode full-switch
switch]
write memory OS10# write memory
reload OS10# reload
Switch name
OS10(config)# hostname Switch1
hostname <new name>
Switch1(config)#
Management port
interface mgmt x/y/z OS10(config)# interface mgmt 1/1/1
no ip address dhcp (disable dhcp
OS10(conf-if-ma-1/1/1)# no ip address dhcp
addressing)
ip address A.B.C.D/<mask> OS10(conf-if-ma-1/1/1)# ip address 192.168.1.1/24
show configuration OS10(conf-if-ma-1/1/1)# show configuration
show interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)# do show interface mgmt 1/1/1
Management default gateway
management route 0.0.0.0/0 [next-hop
OS10(config)# management route 0.0.0.0/0 192.168.1.254
addr]
ping A.B.C.D OS10# ping 192.168.5.5
SSH/Telnet
Enable telnet: ip telnet server enable OS10(config)# ip telnet server enable
Disable telnet: no ip telnet server
OS10(config)# no ip telnet server enable
enable
Show ip ssh OS10# show ip ssh
Enable SSH: ip ssh server enable OS10(config)# ip ssh server enable
Disable SSH: no ip ssh server enable OS10(config)# no ip ssh server enable
Crypto ssh-key generate rsa [bits] OS10# crypto ssh-key generate rsa 4096
Upgrade firmware
show version OS10# show version
OS10# image download
Image download [file-url] scp://dnos_user:[email protected]:/var/www/htmo/PKGS_OS10-
Enteprise-10.5.1.0.124stretch-installer-x86_64.bin
show image status OS10# show image status
show boot OS10# show boot
dir image OS10# dir image
OS10# image install image://PKGS_OS10-Enteprise-
10.5.1.0.124stretch-installer-x86_64.bin
image install [file location]
OS10# image install
scp://dnos_user:[email protected]:/var/www/htmo/PKGS_OS10-
Enteprise-10.5.1.0.124stretch-installer-x86_64.bin
show boot detail OS10# show boot detail
boot system [active | standby] OS10# boot system standby
reload OS10# reload

pg. 1
Command Syntax Command Example
Secure boot feature
secure-boot enable OS10(config)# secure-boot enable
show secure-boot status OS10# show secure-boot status
OS10# secure-boot verify kernel
secure-boot verify OS10# secure-boot verify file-system-integrity
OS10# secure-boot verify startup-config
Creating VLANs
interface vlan [VLAN ID] OS10(config)# interface vlan 10
description [description text] OS10(conf-if-vl-10)# description Finance
show vlan OS10# show vlan
Working with switch interfaces
show interface status OS10# show interface status
interface ethernet node/slot/port OS10(config)# interface ethernet 1/1/7
Disable: shutdown OS10(conf-if-eth1/1/7)# shutdown
Enable: no shutdown OS10(conf-if-eth1/1/7)# no shutdown
OS10(config)# interface range ethernet 1/1/2-1/1/9
interface range
OS10(conf-range-eth1/1/2-1/1/9)#
show configuration OS10(conf-if-eth1/1/7)# show configuration
L2 untagged interface
Assign VLAN to an interface: OS10(config)# interface ethernet 1/1/4
interface ethernet 1/1/1 OS10(conf-if-eth1/1/4)# switchport mode access
switchport access vlan [VLAN ID] OS10(conf-if-eth1/1/4)# switchport access vlan 10
Multiple VLANs on a single interface
switchport mode trunk OS10(conf-if-ma-1/1/3)# switchport mode trunk
switchport trunk allowed vlan [list] OS10(conf-if-ma-1/1/3)# switchport trunk allowed vlan 10,20,30
Configure a L3 physical interface
interface [port type] node/slot/port OS10(config)# interface ethernet 1/1/12
no switchport OS10(conf-if-eth1/1/12)# # no switchport
ip address A.B.C.D/mask OS10(conf-if-eth1/1/12)# # ip address 10.10.10.1/30
ip route 0.0.0.0/0 [next-hop router] OS10(config)# ip route 0.0.0.0/0 10.10.10.2
show ip route OS10(config)# do show ip route
Configure a VLAN interface with a L3 IP address and assign to a physical interface
interface vlan [VLAN ID] OS10(config)# interface vlan 10
ip address A.B.C.D/mask OS10(conf-if-vl-10)# ip address 192.168.10.1/24
interface ethernet node/slot/port OS10(conf-if-vl-10)# interface ethernet 1/1/1
switchport access vlan [VLAN ID] OS10(conf-if-eth1/1/1)# switchport access vlan 10
show ip route OS10(conf-if-eth1/1/1)# show ip route
Saving switch configuration changes
show running-configuration OS10# show running-configuration
copy running-configuration startup-
OS10# copy running-configuration startup-configuration
configuration
write memory OS10# write memory
dir config OS10# dir config
Disable zero-touch deployment (ZTD)
ztd cancel OS10# ztd cancel
show ztd status OS10# show ztd status
Configure users and credentials
username [name] password [password]
OS10(config)# username jayne20 password P@ssw0rd20 role
role [netadmin | netoperator |
netadmin priv-lvl 15
secadmin] priv-lvl [1-15]
show running-config | grep username OS10# show running-configuration | grep username

End of command list

pg. 2

You might also like