Scribd
Upload
7K views2 pages

ZF Ecomat Controller (Tcu) Fault Codes

This document lists fault codes for a ZF ECOMAT CONTROLLER (TCU), including fault code numbers (SPN), fault descriptions, and fault mode identifiers (FMI). Some examples of faults listed are: retarder lever below low limit, various clutch and solenoid circuit faults, temperature sensor faults, output speed and turbine speed sensor faults, voltage faults, and checksum errors. Over 50 individual fault codes are described.

Uploaded by

kandukiss
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7K views2 pages

ZF Ecomat Controller (Tcu) Fault Codes

This document lists fault codes for a ZF ECOMAT CONTROLLER (TCU), including fault code numbers (SPN), fault descriptions, and fault mode identifiers (FMI). Some examples of faults listed are: retarder lever below low limit, various clutch and solenoid circuit faults, temperature sensor faults, output speed and turbine speed sensor faults, voltage faults, and checksum errors. Over 50 individual fault codes are described.

Uploaded by

kandukiss
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ZF ECOMAT CONTROLLER(TCU) FAULT CODES

FAULT CODE DESCRIPTION SPN FMI

Retarder lever below low limit 5014 3


Retarder lever below low limit 5014 4
Retarder Temperature sensor open circuit 5017 3
Retarder Temperature sensor short negative 5017 4
Sump Temperature sensor open circuit 5018 3
Sump Temperature sensor short - negative 5018 4
Clutch A positive short 5021 3
Clutch A negative short 5021 4
Clutch A open circuit 5021 5
Clutch B positive short 5022 3
Clutch B negative short 5022 4
Clutch B open Circuit 5022 5
Clutch C positive short 5023 3
Clutch C negative short 5023 4
Clutch C open Circuit 5023 5
Clutch D positive short 5024 3
Clutch D negative short 5024 4
Clutch D open Circuit 5024 5
Clutch E positive short 5025 3
Clutch E negative short 5025 4
Clutch E open Circuit 5025 5
Clutch F positive short 5026 3
Clutch F negative short 5026 4
Clutch F open Circuit 5026 5
Clutch G positive short 5027 3
Clutch G negative short 5027 4
Clutch G open Circuit 5027 5
Lock up clutch positive short 5028 3
Lock up clutch negative short 5028 4
Lock up clutch open circuit 5028 5
Retarder accumulator valve Y2 positive short 5029 3
Retarder accumulator valve Y2 negative short 5029 4
Retarder accumulator valve Y2 open circuit 5029 5
Locking solenoid positive short 5039 3
Locking solenoid negative short 5039 4
Locking solenoid open circuit 5039 5
Status monitor positive short 5041 3
Status monitor negative short 5041 4
Status monitor open circuit 5041 5
D1 current resistance 5044 2
D1 current positive short 5044 3
D1 current negative short 5044 4
D1 current open circuit 5044 5
Retarder current resistance 5045 2
Retarder Y1 current open circuit 5045 3
Retarder Y1 current open circuit 5045 4
Retarder Y1 current open circuit 5045 5
Shift selector signal fault 5046 2
Hour counter fault 5049 2
Error memory data fault 5051 2
ECU system fault 5052 11
Vehicle CAN fault 5055 2
FAULT CODE DESCRIPTION SPN FMI

Retarder on valve positive short 5056 3


Retarder on valve negative short 5056 4
Retarder on valve open circuit 5056 5
Output speed signal overflow 5058 11
Output speed signal fault 5058 2
Turbine speed signal overflow 5059 11
Turbine speed sensor fault 5059 2
Check sum error 5061 11
Retarder resistor open circuit 5062 3
Retarder resistor negative short 5062 4
Gearbox Id code 5063 14
Retarder temperature over limit 5065 0
Retarder out over temperature 5065 14
Sump temperature over limit 5066 0
Sump over temperature 5066 14
Unused output positive short 5067 3
Central cut off fault 5068 12
Hydraulic cooling fan open circuit 5071 5
Retarder lever digital fault 5075 12
Slip time 1-2 load upshift 5076 0
Slip time 2-3 load upshift 5076 0
Slip time 3-4 load upshift 5076 0
Slip time 4-5 load upshift 5076 0
Slip time 5-6 load upshift 5076 0
Operating voltage above limits 5079 3
Operating voltage below limits 5079 4
EEPROM correction parameter check sum 5087 2

You might also like