Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 1 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 211:2010/CISPR 11:2010 5.1 4.01 Y Industrial, scientific and medical equipment - 2010-06-17 1 I A 2010-06-17 2015-06-17
Radio-frequency disturbance characteristics -
Limits and methods of measurement
SANS 212:2009/CISPR 12:2009 6.1 4.01 Y Vehicles, boats, and internal combustion 2009-05-08 1 I A 2009-05-08 2014-05-08
engines - Radio disturbance characteristics -
Limits and methods of measurement for the
protection of off-board receivers
SANS 213:2011/CISPR 13:2009 5 4 Y Sound and television broadcast receivers and 2011-04-08 2016-04-08
associated equipment - Radio disturbance
characteristics - Limits and methods of
measurement
SANS 214-1:2009/CISPR 14-1:2009 5.1 3.01 Y Electromagnetic compatibility - Requirements 2009-06-12 2 I A 2012-04-05 2017-04-05
for household appliances, electric tools and
similar apparatus Part 1: Emission
SANS 214-2:2009/CISPR 14-2:2008 1.2 1.02 Y Electromagnetic compatibility - Requirements 2009-05-08 2 I A 2009-05-08 2014-05-08
for household appliances, electric tools and
similar apparatus Part 2: Immunity - Product
family standard
SANS 215:2009/CISPR 15:2009 7.2 4.02 Y Limits and methods of measurement of radio 2009-05-15 2 I A 2009-05-15 2014-05-15
disturbance characteristics of electrical
lighting and similar equipment
SANS 216-1-1:2011/CISPR 16-1-1:2010 3.1 3.01 Y Specification for radio disturbance and 2011-05-27 1 I C 2011-05-27 2016-05-27
immunity measuring apparatus and methods
Part 1-1: Radio disturbance and immunity
measuring apparatus - Measuring apparatus
SANS 216-1-2:2007/CISPR 16-1-2:2006 1.2 1.02 Y Specification for radio disturbance and 2007-04-13 1 I C 2009-05-08 2014-05-08
immunity measuring apparatus and methods
Part 1-2: Radio disturbance and immunity
measuring apparatus - Ancillary equipment -
Conducted disturbances
SANS 216-1-3:2005/CISPR 16-1-3:2004 2 2 Y Specification for radio disturbance and 2005-01-28 1 I C 2006-09-01 2016-03-04
immunity measuring apparatus and methods
Part 1-3: Radio disturbance and immunity
measuring apparatus - Ancillary equipment -
Disturbance power
SANS 216-1-4:2010/CISPR 16-1-4:2010 3 3 Y Specification for radio disturbance and 2010-09-10 1 I C 2011-04-08 2016-04-08
immunity measuring apparatus and methods
Part 1-4: Radio disturbance and immunity
measuring apparatus - Antennas and test
sites for radiated disturbance measurements
SANS 216-1-5:2004/CISPR 16-1-5:2003 1 1 Y Specification for radio disturbance and 2004-05-21 2014-11-20
immunity measuring apparatus and methods
Part 1-5: Radio disturbance and immunity
measuring apparatus - Antenna calibration
test sites for 30 MHz to 1 000 MHz

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 2 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 216-2-1:2011/CISPR 16-2-1:2010 2.1 2.01 Y Specification for radio disturbance and 2011-03-18 1 I A 2011-03-18 2016-03-18
immunity measuring apparatus and methods
Part 2-1: Methods of measurement of
disturbances and immunity - Conducted
disturbance measurements
SANS 216-2-2:2010/CISPR 16-2-2:2010 2 2 Y Specification for radio disturbance and 2010-11-12 2015-11-12
immunity measuring apparatus and methods
Part 2-2: Methods of measurement of
disturbances and immunity - Measurement of
disturbance power
SANS 216-2-3:2011/CISPR 16-2-3:2010 3.1 3.01 Y Specification for radio disturbance and 2011-02-24 1 I A 2011-02-24 2016-02-24
immunity measuring apparatus and methods
Part 2-3: Methods of measurement of
disturbances and immunity - Radiated
disturbance measurements
SANS 216-2-4:2004/CISPR 16-2-4:2003 1 1 Y Specification for radio disturbance and 2004-05-21 2014-11-20
immunity measuring apparatus and methods
Part 2-4: Methods of measurement of
disturbances and immunity - Immunity
measurements
SANS 216-3:2010/CISPR/TR 16-3:2010 3 2 Y Specification for radio disturbance and 2010-12-09 2015-12-09
immunity measuring apparatus and methods
Part 3: CISPR technical reports
SANS 216-4-1:2009/CISPR/TR 16-4-1:2009 2 2 Y Specification for radio disturbance and 2009-08-28 2014-08-28
immunity measuring apparatus and methods
Part 4-1: Uncertainties, statistics and limit
modelling - Uncertainties in standardized
EMC tests
SANS 216-4-2:2012/CISPR 16-4-2:2011 2 2 Y Specification for radio disturbance and 2012-04-05 2017-04-05
immunity measuring apparatus and methods
Part 4-2: Uncertainties, statistics and limit
modelling - Measurement instrumentation
uncertainty
SANS 216-4-3:2007/CISPR/TR 16-4-3:2007 2.1 2.01 Y Specification for radio disturbance and 2007-04-13 1 I A 2007-04-13 2019-01-17
immunity measuring apparatus and methods
Part 4-3: Uncertainties, statistics and limit
modelling - Statistical considerations in the
determination of EMC compliance of mass-
produced products
SANS 216-4-4:2008/CISPR/TR 16-4-4:2007 2 2 Y Specification for radio disturbance and 2008-01-18 2019-01-17
immunity measuring apparatus and methods
Part 4-4: Uncertainties, statistics and limit
modelling - Statistics of complaints and a
model for the calculation of limits for the
protection of radio services
SANS 218-1:2010/TR CISPR 18-1:2010 2 2 Y Radio interference characteristics of 2010-10-01 2015-10-01
overhead power lines and high-voltage
equipment Part 1: Description of phenomena
Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 3 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 218-2:2010/TR CISPR 18-2:2010 2 2 Y Radio interference characteristics of 2010-10-01 2015-10-01
overhead power lines and high-voltage
equipment Part 2: Methods of measurement
and procedure for determining limits
SANS 218-3:2010/TR CISPR 18-3:2010 2 2 Y Radio interference characteristics of 2010-10-01 2015-10-01
overhead power lines and high-voltage
equipment Part 3: Code of practice for
minimizing the generation of radio noise
SANS 222:2009/CISPR 22:2008 6 6 Y Information technology equipment - Radio 2009-04-24 2014-04-24
disturbance characteristics - Limits and
methods of measurement
SANS 224:2010/CISPR 24:2010 2 2 Y Information technology equipment - Immunity 2010-12-09 2015-12-09
characteristics - Limits and methods of
measurement
SANS 225:2008/CISPR 25:2008 3 2 Y Vehicles, boats and internal combustion 2008-08-15 1 I C 2009-03-27 2014-03-27
engines - Radio disturbance characteristics -
Limits and methods of measurement for the
protection of on-board receivers
SANS 2200:2010/CISPR 20:2006 6 2 Y Sound and television broadcast receivers and 2010-06-25 2015-06-25
associated equipment - Immunity
characteristics - Limits and methods of
measurement
SANS 50065-1:2012/EN 50065-1:2011 3 1 Y Signalling on low-voltage electrical 2012-01-27 2017-01-27
installations in the frequency range 3 kHz to
148,5 kHz Part 1: General requirements,
frequency bands and electromagnetic
disturbances
SANS 50444:2009/EN 50444:2008 1 1 Y Basic standard for the evaluation of human 2009-03-27 2014-03-27
exposure to electromagnetic fields from
equipment for arc welding and allied
processes
SANS 60384-1:1999/IEC 60384-1:1999 3 2 Y Fixed capacitors for use in electronic 1999-09-23 1 N A 2007-06-01 2012-06-01
equipment Part 1: Generic specification

SANS 60384-2:2007/IEC 60384-2:2005 3 2 Y Fixed capacitors for use in electronic 2007-08-31 2012-08-31
equipment Part 2: Sectional specification:
Fixed metallized polyethylene-terephthalate
film dielectric d.c. capacitors
SANS 60384-2-1:2007/IEC 60384-2-1:2005 2 2 Y Fixed capacitors for use in electronic 2007-08-03 2018-11-22
equipment Part 2-1: Blank detail
specification: Fixed metallized polyethylene-
terephthalate film dielectric d.c. capacitors -
Assessment levels E and EZ
SANS 60384-4:2007/IEC 60384-4:2007 4 2 Y Fixed capacitors for use in electronic 2007-08-03 1 I C 2007-08-03 2012-08-03
equipment Part 4: Sectional specification -
Aluminium electrolytic capacitors with solid
(Mn02) and non-solid electrolyte

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 4 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 60384-6:2007/IEC 60384-6:2005 3 2 Y Fixed capacitors for use in electronic 2007-08-31 2012-08-31
equipment Part 6: Sectional specification:
Fixed metallized polycarbonate film dielectric
d.c. capacitors
SANS 60384-6-1:2007/IEC 60384-6-1:2005 2 2 Y Fixed capacitors for use in electronic 2007-07-06 2012-07-06
equipment Part 6-1: Blank detail
specification: Fixed metallized polycarbonate
film dielectric d.c. capacitors - Assessment
level E
SANS 60384-14:2007/IEC 60384-14:2005 3 2 Y Fixed capacitors for use in electronic 2007-07-27 2012-07-27
equipment Part 14: Sectional specification -
Fixed capacitors for electromagnetic
interference suppression and connection to
the supply mains
SANS 60384-14-1:2007/IEC 60384-14-1:2005 2 2 Y Fixed capacitors for use in electronic 2007-07-06 2012-07-06
equipment Part 14-1: Blank detail
specification: Fixed capacitors for
electromagnetic interference suppression and
connection to the supply mains - Assessment
level D
SANS 60728-2:2010/IEC 60728-2:2010 2 2 Y Cable networks for television signals, sound 2010-06-25 2015-06-25
signals and interactive services Part 2:
Electromagnetic compatibility for equipment
SANS 60939-1:2007/IEC 60939-1:2005 2 2 Y Passive filter units for electromagnetic 2007-09-14 1 I C 2007-09-14 2012-09-14
interference suppression Part 1: Generic
specification
SANS 61000-1-1:1992/IEC 61000-1-1:1992 1 1 Y Electromagnetic compatibility (EMC) Part 1: 1994-09-19 1 N A 2007-05-25 2016-11-11
General Section 1: Application and
interpretation of fundamental definitions and
terms
SANS 61000-1-2:2009/IEC TS 61000-1-2:2008 2 2 Y Electromagnetic compatibility (EMC) Part 1-2: 2009-05-08 2014-05-08
General - Methodology for the achievement of
functional safety of electrical and electronic
systems including equipment with regard to
electromagnetic phenomena
SANS 61000-1-3:2006/IEC/TR 61000-1-3:2002 1 1 Y Electromagnetic compatibility (EMC) Part 1-3: 2006-12-15 2016-03-04
General - The effects of high-altitude EMP
(HEMP) on civil equipment and systems
SANS 61000-1-5:2006/IE/TR 61000-1-5:2004 1 1 Y Electromagnetic compatibility (EMC) Part 1-5: 2006-12-08 2016-03-04
General - High power electromagnetic
(HPEM) effects on civil systems
SANS 61000-2-1:2006/IEC 61000-2-1:1990 1 1 Y Electromagnetic compatibility (EMC) Part 2: 2006-12-15 2016-03-04
Environment Section 1: Description of the
environment - Electromagnetic environment
for low-frequency conducted disturbances
and signalling in public power supply systems

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 5 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 61000-2-2:2002/IEC 61000-2-2:2002 2 2 Y Electromagnetic compatibility (EMC) Part 2-2: 2002-11-22 2018-03-01
Environment - Compatibility levels for low-
frequency conducted disturbances and
signalling in public low-voltage power supply
systems
SANS 61000-2-3:2007/IEC 61000-2-3:1992 1 1 Y Electromagnetic compatibility (EMC) Part 2: 2007-02-02 2016-11-11
Environment Section 3: Description of the
environment - Radiated and non-network-
frequency-related conducted phenomena
SANS 61000-2-4:2003/IEC 61000-2-4:2002 2 1 Y Electromagnetic compatibility (EMC) Part 2-4: 2003-08-29 2018-03-01
Environment - Compatibility levels in
industrial plants for low-frequency conducted
disturbances
SANS 61000-2-5:2012/IEC/TR 61000-2-5:2011 2 2 Y Electromagnetic compatibility (EMC) Part 2-5: 2012-04-05 2017-04-05
Environment - Description and classification
of electromagnetic environments
SANS 61000-2-6:1995/IEC 61000-2-6:1995 1 1 Y Electromagnetic compatibility (EMC) Part 2: 1997-08-18 1 N A 2007-04-13 2016-11-11
Environment Section 6: Assessment of the
emission levels in the power supply of
industrial plants as regards low-frequency
conducted disturbances
SANS 61000-2-7:1998/IEC 61000-2-7:1998 1 1 Y Electromagnetic compatibility (EMC) Part 2: 1999-02-05 1 N A 2007-04-13 2016-11-11
Environment Section 7: Low frequency
magnetic fields in various environments
SANS 61000-2-9:2007/IEC 61000-2-9:1996 1 1 Y Electromagnetic compatibility (EMC) Part 2: 2007-08-03 2016-11-11
Environment Section 9: Description of HEMP
environment - Radiated disturbance - Basic
EMC publication
SANS 61000-2-10:2007/IEC 61000-2-10:1998 1 1 Y Electromagnetic compatibility (EMC) Part 2- 2007-08-03 2016-11-11
10: Environment - Description of HEMP
environment - Conducted disturbance
SANS 61000-2-11:2006/IEC 61000-2-11:1999 1 1 Y Electromagnetic compatibility (EMC) Part 2- 2006-12-15 2016-03-04
11: Environment - Classification of HEMP
environments
SANS 61000-2-12:2005/IEC 61000-2-12:2003 1 1 Y Electromagnetic compatibility (EMC) Part 2- 2005-11-21 2015-04-16
12: Environment - Compatibility levels for low-
frequency conducted disturbances and
signalling in public medium-voltage power
supply systems
SANS 61000-2-13:2007/IEC 61000-2-13:2005 1 1 Y Electromagnetic compatibility (EMC) Part 2- 2007-08-03 2016-11-11
13: Environment - High-power
electromagnetic (HPEM) environments -
Radiated and conducted
SANS 61000-3-2:2009/IEC 61000-3-2:2009 3.2 3.02 Y Electromagnetic compatibility (EMC) Part 3-2: 2009-06-12 2 I A 2009-06-12 2014-06-12
Limits - Limits for harmonic current emissions
(equipment input current <= 16 A per phase)

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 6 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 61000-3-3:2009/IEC 61000-3-3:2008 2 2 Y Electromagnetic compatibility (EMC) Part 3-3: 2009-02-06 2014-02-06
Limits - Limitation of voltage changes, voltage
fluctuations and flicker in public low-voltage
supply systems, for equipment with rated
current <= 16 A per phase and not subject to
conditional connection
SANS 61000-3-4:1998/IEC 61000-3-4:1998 1 1 Y Electromagnetic compatibility (EMC) Part 3-4: 1999-09-23 1 N A 2007-04-13 2018-03-01
Limits - Limitation of emission of harmonic
currents in low-voltage power supply systems
for equipment with rated current greater than
16 A
SANS 61000-3-5:2009/IEC/TS 61000-3-5:2009 2 2 Y Electromagnetic compatibility (EMC) Part 3-5: 2009-09-23 2014-09-23
Limits - Limitation of voltage fluctuations and
flicker in low-voltage power supply systems
for equipment with rated current greater than
75 A
SANS 61000-3-11:2003/IEC 61000-3-11:2000 1 1 Y Electromagnetic compatibility (EMC) Part 3- 2003-08-01 2014-03-13
11: Limits - Limitation of voltage changes,
voltage fluctuations and flicker in public low-
voltage supply systems - Equipment with
rated current <= 75 A and subject to
conditional connection
SANS 61000-3-12:2012/IEC 61000-3-12:2011 2 2 Y Electromagnetic compatibility (EMC) Part 3- 2012-04-05 2017-04-05
12: Limits - Limits for harmonic currents
produced by equipment connected to public
low-voltage systems with input current >16 A
and <=75 A per phase
SANS 61000-3-15:2012/IEC/TR 61000-3-15:2011 1 1 Y Electromagnetic compatibility (EMC) Part 3- 2012-03-30 2017-03-30
15: Limits - Assessment of low frequency
electromagnetic immunity and emission
requirements for dispersed generation
systems in LV network
SANS 61000-4-1:2007/IEC 61000-4-1:2006 3 3 Y Electromagnetic compatibility (EMC) Part 4-1: 2007-04-13 2018-03-01
Testing and measurement techniques -
Overview of IEC 61000-4 series
SANS 61000-4-2:2009/IEC 61000-4-2:2008 2 2 Y Electromagnetic compatibility (EMC) Part 4-2: 2009-03-13 2014-03-13
Testing and measurement techniques -
Electrostatic discharge immunity test
SANS 61000-4-3:2008/IEC 61000-4-3:2008 3.1 3.01 Y Electromagnetic compatibility (EMC) Part 4-3: 2008-05-23 2 I A 2010-07-23 2015-07-23
Testing and measurement techniques -
Radiated, radio-frequency, electromagnetic
field immunity test
SANS 61000-4-4:2011/IEC 61000-4-4:2011 2.1 2.01 Y Electromagnetic compatibility (EMC) Part 4-4: 2011-04-20 1 I A 2011-04-20 2016-04-20
Testing and measurement techniques -
Electrical fast transient/burst immunity test
SANS 61000-4-5:2006/IEC 61000-4-5:2005 2 2 Y Electromagnetic compatibility (EMC) Part 4-5: 2006-06-15 2016-03-18
Testing and measurement techniques - Surge
immunity test
Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 7 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 61000-4-6:2009/IEC 61000-4-6:2008 3 3 Y Electromagnetic compatibility (EMC) Part 4-6: 2009-04-24 2014-04-24
Testing and measurement techniques -
Immunity to conducted disturbances, induced
by radio-frequency fields
SANS 61000-4-7:2009/IEC 61000-4-7:2009 2.1 2.01 Y Electromagnetic compatibility (EMC) Part 4-7: 2009-12-04 1 I A 2009-12-04 2014-12-04
Testing and measurement techniques -
General guide on harmonics and
interharmonics measurements and
instrumentation, for power supply systems
and equipment connected thereto
SANS 61000-4-8:2009/IEC 61000-4-8:2009 2 2 Y Electromagnetic compatibility (EMC) Part 4-8: 2009-12-11 2014-12-11
Testing and measurement techniques -
Power frequency magnetic field immunity test
SANS 61000-4-9:2003/IEC 61000-4-9:2001 1.1 1.01 Y Electromagnetic compatibility (EMC) Part 4-9: 2003-08-29 1 I A 2003-08-29 2014-03-13
Testing and measurement techniques - Pulse
magnetic field immunity test
SANS 61000-4-10:2003/IEC 61000-4-10:2001 1.1 1.01 Y Electromagnetic compatibility (EMC) Part 4- 2003-08-29 1 I A 2003-08-29 2014-03-13
10: Testing and measurement techniques -
Damped oscillatory magnetic field immunity
test
SANS 61000-4-11:2005/IEC 61000-4-11:2004 1 1 Y Electromagnetic compatibility (EMC) Part 4- 2005-05-12 2015-04-16
11: Testing and measurement techniques -
Voltage dips, short interruptions and voltage
variations immunity tests
SANS 61000-4-12:2007/IEC 61000-4-12:2006 2 2 Y Electromagnetic compatibility (EMC) Part 4- 2007-04-13 2018-03-01
12: Testing and measurement techniques -
Ring wave immunity test
SANS 61000-4-13:2009/IEC 61000-4-13:2009 1.1 1.01 Y Electromagnetic compatibility (EMC) Part 4- 2009-09-11 1 I A 2009-09-11 2014-09-11
13: Testing and measurement techniques -
Harmonics and interharmonics including
mains signalling at a.c. power port, low
frequency immunity tests
SANS 61000-4-14:2009/IEC 61000-4-14:2009 1.2 1.02 Y Electromagnetic compatibility (EMC) Part 4- 2009-09-11 2 I A 2009-09-11 2014-09-11
14: Testing and measurement techniques -
Voltage fluctuation immunity test for
equipment with input current not exceeding
16 A per phase
SANS 61000-4-16:2011/IEC 61000-4-16:2011 1.2 1.02 Y Electromagnetic compatibility (EMC) Part 4- 2011-12-09 1 I A 2005-05-12 2016-12-09
16: Testing and measurement techniques -
Test for immunity to conducted, common
mode disturbances in the frequency range 0
Hz to 150 kHz
SANS 61000-4-17:2009/IEC 61000-4-17:2009 1.2 1.02 Y Electromagnetic compatibility (EMC) Part 4- 2009-03-13 2 I A 2009-03-13 2014-03-13
17: Testing and measurement techniques -
Ripple on d.c. input power port immunity test

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 8 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 61000-4-20:2010/IEC 61000-4-20:2010 2 2 Y Electromagnetic compatibility (EMC) Part 4- 2010-12-09 2015-12-09
20: Testing and measurement techniques -
Emission and immunity testing in transverse
electromagnetic (TEM) waveguides
SANS 61000-4-24:2006/IEC 61000-4-24:1997 1 1 Y Electromagnetic compatibility (EMC) Part 4: 2006-12-08 2016-03-31
Testing and measurement techniques
Section 24: Test methods for protective
devices for HEMP conducted disturbance -
Basic EMC publication
SANS 61000-4-25:2006/IEC 61000-4-25:2001 1 1 Y Electromagnetic compatibility (EMC) Part 4- 2006-12-08 2016-03-18
25: Testing and measurement techniques -
HEMP immunity test methods for equipment
and systems
SANS 61000-4-27:2009/IEC 61000-4-27:2009 1.1 1.01 Y Electromagnetic compatibility (EMC) Part 4- 2009-07-17 1 I A 2009-07-17 2014-07-17
27: Testing and measurement techniques -
Unbalance, immunity test for equipment with
input current not exceeding 16 A per phase
SANS 61000-4-28:2009/IEC 61000-4-28:2009 1.2 1.02 Y Electromagnetic compatibility (EMC) Part 4- 2009-07-17 2 I A 2009-07-17 2014-07-17
28: Testing and measurement techniques -
Variation of power frequency, immunity test
for equipment with input current not
exceeding 16 A per phase
SANS 61000-4-29:2005/IEC 61000-4-29:2000 1 1 Y Electromagnetic compatibility (EMC) Part 4- 2005-08-26 2015-05-07
29: Testing and measurement techniques -
Voltage dips, short interruptions and voltage
variations on d.c. input power port immunity
tests
SANS 61000-4-30:2009/IEC 61000-4-30:2008 2 2 Y Electromagnetic compatibility (EMC) Part 4- 2009-03-13 2014-03-13
30: Testing and measurement techniques -
Power quality measurement methods
SANS 61000-5-1:2006/IEC 61000-5-1:1996 1 1 Y Electromagnetic compatibility (EMC) Part 5: 2006-12-08 2016-03-31
Installation and mitigation guidelines Section
1: General considerations - Basic EMC
publication
SANS 61000-5-2:1997/IEC 61000-5-2:1997 1 1 Y Electromagnetic compatibility (EMC) Part 5: 1999-02-05 1 N A 2007-06-01 2016-11-11
Installation and mitigation guidelines Section
2: Earthing and cabling
SANS 61000-5-3:2008/IEC TR 61000-5-3:1999 1 1 Y Electromagnetic compatibility (EMC) Part 5-3: 2008-02-01 2018-03-01
Installation and mitigation guidelines - HEMP
protection concepts
SANS 61000-5-4:2008/IEC/TR 61000-5-4:1996 1 1 Y Electromagnetic compatibility (EMC) Part 5: 2008-02-01 2018-03-01
Installation and mitigation guidelines Section
4: Immunity to HEMP - Specifications for
protective devices against HEMP radiated
disturbance - Basic EMC publication

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 9 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 61000-5-5:2008/IEC 61000-5-5:1996 1 1 Y Electromagnetic compatibility (EMC) Part 5: 2008-02-08 2018-03-01
Installation and mitigation guidelines Section
5: Specification of protective devices for
HEMP conducted disturbance - Basic EMC
publication
SANS 61000-5-6:2009/IEC TR 61000-5-6:2002 1 1 Y Electromagnetic compatibility (EMC) Part 5-6: 2009-10-23 2014-10-23
Installation and mitigation guidelines -
Mitigation of external EM influences
SANS 61000-6-5:2009/IEC TS 61000-6-5:2001 1 1 Y Electromagnetic compatibility (EMC) Part 6-5: 2009-09-23 2014-09-23
Generic standards - Immunity for power
station and substation environments
SANS 61000-5-7:2009/IEC 61000-5-7:2001 1 1 Y Electromagnetic compatibility (EMC) Part 5-7: 2009-10-23 2014-10-23
Installation and mitigation guidelines -
Degrees of protection provided by enclosures
against electromagnetic disturbances (EM
code)
SANS 61000-6-1:2005/IEC 61000-6-1:2005 2 2 Y Electromagnetic compatibility (EMC) Part 6-1: 2005-09-23 2015-05-14
Generic standards - Immunity for residential,
commercial and light-industrial environments
SANS 61000-6-2:2005/IEC 61000-6-2:2005 2 1 Y Electromagnetic compatibility (EMC) Part 6-2: 2005-08-26 2015-05-14
Generic standards - Immunity for industrial
environments
SANS 61000-6-3:2011/IEC 61000-6-3:2011 2.1 2.01 Y Electromagnetic compatibility (EMC) Part 6-3: 2011-05-20 1 I I 2011-12-09 2016-12-09
Generic standards - Emission standard for
residential, commercial and light-industrial
environments
SANS 61000-6-4:2011/IEC 61000-6-4:2011 2.1 2.01 Y Electromagnetic compatibility (EMC) Part 6-4: 2011-05-27 1 I I 2011-12-09 2016-12-09
Generic standards - Emission standard for
industrial environments
SANS 61000-6-6:2006/IEC 61000-6-6:2003 1 1 Y Electromagnetic compatibility (EMC) Part 6-6: 2006-12-08 2016-03-31
Generic standards - HEMP immunity for
indoor equipment
SANS 61326:2003/IEC 61326:2002 1 1 Y Electrical equipment for measurement, 2003-05-09 1 I C 2003-05-09 2014-03-13
control and laboratory use - EMC
requirements
SANS 61326-1:2007/IEC 61326-1:2005 1 1 Y Electrical equipment for measurement, 2007-08-31 2016-11-11
control and laboratory use - EMC
requirements Part 1: General requirements
SANS 61326-2-1:2009/IEC 61326-2-1:2005 1 1 Y Electrical equipment for measurement, 2009-10-09 2014-10-09
control and laboratory use - EMC
requirements Part 2-1: Particular
requirements - Test configurations,
operational conditions and performance
criteria for sensitive test and measurement
equipment for EMC unprotected applications

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 10 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 61326-2-2:2009/IEC 61326-2-2:2005 1 1 Y Electrical equipment for measurement, 2009-10-09 2014-10-09
control and laboratory use - EMC
requirements Part 2-2: Particular
requirements - Test configurations,
operational conditions and performance
criteria for portable test, measuring and
monitoring equipment used in low-voltage
distribution systems
SANS 61326-2-3:2009/IEC 61326-2-3:2006 1 1 Y Electrical equipment for measurement, 2009-10-09 2014-10-09
control and laboratory use - EMC
requirements Part 2-3: Particular
requirements - Test configuration, operational
conditions and performance criteria for
transducers with integrated or remote signal
conditioning
SANS 61326-2-4:2009/IEC 61326-2-4:2006 1 1 Y Electrical equipment for measurement, 2009-10-30 2014-10-30
control and laboratory use - EMC
requirements Part 2-4: Particular
requirements - Test configurations,
operational conditions and performance
criteria for insulation monitoring devices
according to IEC 61557-8 and for equipment
for insulation fault location according to IEC
61557-9
SANS 61326-2-5:2009/IEC 61326-2-5:2006 1 1 Y Electrical equipment for measurement, 2009-10-30 2014-10-30
control and laboratory use - EMC
requirements Part 2-5: Particular
requirements - Test configurations,
operational conditions and performance
criteria for field devices with interfaces
according to IEC 61784-1, CP 3/2
SANS 62110:2009/IEC 62110:2009 1 1 Y Electric and magnetic field levels generated 2009-12-11 2014-12-11
by AC power systems - Measurement
procedures with regard to public exposure
SANS 62209-1:2006/IEC 62209-1:2005 1 1 Y Human exposure to radio frequency fields 2006-12-15 2016-02-11
from hand-held and body-mounted wireless
communication devices - Human models,
instrumentation, and procedures Part 1:
Procedure to determine the specific
absorption rate (SAR) for hand-held devices
used in close proximity to the ear (frequency
range of 300 MHz to 3 GHz)
SANS 62226-1:2006/IEC 62226-1:2004 1 1 Y Exposure to electric or magnetic fields in the 2006-12-15 2016-02-11
low and intermediate frequency range -
Methods for calculating the current density
and internal electric field induced in the
human body Part 1: General

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 11 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 62226-2-1:2006/IEC 62226-2-1:2004 1 1 Y Exposure to electric or magnetic fields in the 2006-12-15 2016-02-11
low and intermediate frequency range -
Methods for calculating the current density
and internal electric field induced in the
human body Part 2-1: Exposure to magnetic
fields - 2D models
SANS 62233:2006/IEC 62233:2005 1 1 Y Measurement methods for electromagnetic 2006-12-15 2016-02-11
fields of household appliances and similar
apparatus with regard to human exposure
SANS 62311:2008/IEC 62311:2007 1 1 Y Assessment of electronic and electrical 2008-02-15 2018-03-01
equipment related to human exposure
restrictions for electromagnetic fields (0 Hz -
300 GHz)
SANS 62369-1:2009/IEC 62369-1:2008 1 1 Y Evaluation of human exposure to 2009-12-11 2014-12-11
electromagnetic fields from short range
devices (SRDs) in various applications over
the frequency range 0 GHz to 300 GHz - Part
1: Fields produced by devices used for
electronic article surveillance, radio frequency
identification and similar systems
SANS 62577:2009/IEC 62577:2009 1 1 Y Evaluation of human exposure to 2009-12-11 2014-12-11
electromagnetic fields from a stand-alone
broadcast transmitter (30 MHz - 40 GHz)
SANS 101651:2005/ETSI TR 101651:1999 V1.1 1 Y Electromagnetic compatibility and Radio 2005-03-18 2015-03-05
.1 spectrum Matters (ERM); Classification of the
electromagnetic environment conditions for
equipment in telecommunication networks
SANS 201468:2004/ETSI ES 201468:2002 V1.2 1 Y Electromagnetic compatibility and Radio 2004-04-08 2014-11-27
.1 spectrum Matters (ERM); Additional
ElectroMagnetic Compatibility (EMC)
requirements and resistibility requirements for
telecommunications equipment for enhanced
availability of service in specific applications
SANS 300127:1999/EN 300127:1999 1 Y Electromagnetic compatibility and Radio 2000-01-20 1 N A 2007-06-01 2016-11-11
spectrum Matters (ERM) - Radiated emission
testing of physically large telecommunication
systems
SANS 300132-1:2004/ETS 300132-1:1996 1 1 Y Equipment Engineering (EE); Power supply 2004-05-07 2014-11-27
interface at the input to telecommunications
equipment Part 1: Operated by alternating
current (ac) derived from direct current (dc)
sources
SANS 300132-2:2004/ETSI EN 300132-2:2003 V2.1 1 Y Environmental Engineering (EE); Power 2004-04-23 2014-11-27
.2 supply interface at the input to
telecommunications equipment Part 2:
Operated by direct current (dc)

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 12 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 300132-3:2004/ETSI EN 300132-3:2003 V1.2 1 Y Environmental Engineering (EE); Power 2004-04-08 2014-11-27
.1 supply interface at the input to
telecommunications equipment Part 3:
Operated by rectified current source,
alternating current source or direct current
source up to 400 V
SANS 300386:2014/ETSI EN 300386:2012 V1.6 4 Y Electromagnetic compatibility and Radio 2014-03-20 2019-03-20
.1 spectrum Matters (ERM); Telecommunication
network equipment; ElectroMagnetic
Compatibility (EMC) requirements
SANS 301489-1:2005/ETSI EN 301489-1:2005 V1.6 2 Y Electromagnetic compatibility and Radio 2005-10-14 2015-05-14
.1 spectrum Matters (ERM) - ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 1: Common
technical requirements
SANS 301489-2:2005/ETSI EN 301489-2:2002 V1.3 2 Y Electromagnetic compatibility and Radio 2005-04-01 2015-03-05
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 2: Specific
conditions for radio paging equipment
SANS 301489-3:2005/ETSI EN 301489-3:2002 V1.4 2 Y Electromagnetic compatibility and Radio 2005-04-01 2015-03-05 2014-02-21
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 3: Specific
conditions for Short-Range Devices (SRD)
operating on frequencies between 9 kHz and
40 GHz
SANS 301489-4:2014/ETSI EN 301489-4:2009 V1.4 3 Y Electromagnetic compatibility and Radio 2014-01-17 2019-01-17
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 4: Specific
conditions for fixed radio links; Broadband
Data Transmission System Base stations,
ancillary equipment and services
SANS 301489-5:2003/ETSI EN 301489-5:2002 V1.3 1 Y Electromagnetic compatibility and Radio 2003-05-30 2014-03-13
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 5: Specific
conditions for Private land Mobile Radio
(PMR) and ancillary equipment (speech and
non-speech)
SANS 301489-6:2005/ETSI EN 301489-6:2002 V1.2 2 Y Electromagnetic compatibility and Radio 2005-04-01 2015-03-05
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 6: Specific
conditions for Digital Enhanced Cordless
Telecommunications (DECT) equipment

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 13 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 301489-7:2006/ETSI EN 301489-7:2005 V1.3 3 Y Electromagnetic compatibility and Radio 2006-06-09 2016-01-21
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 7: Specific
conditions for mobile and portable radio and
ancillary equipment of digital cellular radio
telecommunications systems (GSM and
DCS)
SANS 301489-8:2005/ETSI EN 301489-8:2002 V1.2 2 Y Electromagnetic compatibility and Radio 2005-04-22 2015-03-05
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 8: Specific
conditions for GSM base stations
SANS 301489-9:2003/ETSI EN 301489-9:2002 V1.3 1 Y Electromagnetic compatibility and Radio 2003-08-01 2014-03-13
.1 spectrum Matters (ERM); Electromagnetic
compatibility (EMC) standard for radio
equipment and services Part 9: Specific
conditions for wireless microphones, similar
Radio Frequency (RF) audio link equipment,
cordless audio and in-ear monitoring devices
SANS 301489-11:2004/ETSI EN 301489-11:2002 V1.2 1 Y Electromagnetic compatibility and Radio 2004-04-02 2014-11-27
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 11: Specific
conditions for terrestrial sound broadcasting
service transmitters
SANS 301489-12:2005/ETSI EN 301489-12:2003 V1.2 2 Y Electromagnetic compatibility and Radio 2005-04-01 2015-03-05
.1 Spectrum Matters (ERM); ElectroMagnetic
compatibility (EMC) standard for radio
equipment and services Part 12: Specific
conditions for Very Small Aperture Terminal,
Satellite Interactive Earth Stations operated in
the frequency ranges between 4 GHz and 30
GHz in the Fixed Satellite Service (FSS)
SANS 301489-14:2004/ETSI EN 301489-14:2003 V1.2 1 Y Electromagnetic compatibility and Radio 2004-04-02 2014-11-27
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 14: Specific
conditions for analogue and digital terrestrial
TV broadcasting service transmitters
SANS 301489-15:2004/ETSI EN 301489-15:2002 V1.2 1 Y Electromagnetic compatibility and Radio 2004-04-02 2014-11-27
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 15: Specific
conditions for commercially available amateur
radio equipment

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 14 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 301489-17:2005/ETSI EN 301489-17:2002 V1.2 2 Y Electromagnetic compatibility and Radio 2005-04-22 2015-03-11
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 17: Specific
conditions for 2,4 GHz wideband
transmission systems and 5 GHz high
performance RLAN equipment
SANS 301489-18:2003/ETSI EN 301489-18:2002 V1.3 1 Y Electromagnetic compatibility and Radio 2003-05-30 2014-03-13
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 18: Specific
conditions for Terrestrial Trunked Radio
(TETRA) equipment
SANS 301489-19:2004/ETSI EN 301489-19:2002 V1.2 1 Y Electromagnetic compatibility and Radio 2004-04-02 2014-11-27
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 19: Specific
conditions for Receive Only Mobile Earth
Stations (ROMES) operating in the 1,5 GHz
band providing data communications
SANS 301489-20:2004/ETSI EN 301489-20:2002 V1.2 1 Y Electromagnetic compatibility and Radio 2004-04-02 2014-11-27
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 20: Specific
conditions for Mobile Earth Stations (MES)
used in the Mobile Satellite Services (MSS)
SANS 301489-22:2005/ETSI EN 301489-22:2003 V1.3 1 Y Electromagnetic compatibility and Radio 2005-11-21 2015-03-11
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 22: Specific
conditions for ground based VHF
aeronautical mobile and fixed radio
equipment
SANS 301489-23:2005/ETSI EN 301489-23:2002 V1.2 1 Y Electromagnetic compatibility and Radio 2005-11-21 2015-03-11
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 23: Specific
conditions for IMT-2000 CDMA Direct Spread
(UTRA) Base Station (BS) radio, repeater
and ancillary equipment
SANS 301489-24:2006/ETSI EN 301489-24:2005 V1.3 2 Y Electromagnetic compatibility and Radio 2006-06-09 2016-02-04
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 24: Specific
conditions for IMT-2000 CDMA Direct Spread
(UTRA) for Mobile and portable (UE) radio
and ancillary equipment

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen
Report Date : 2014-08-04

Cost Centre(s) : % LIST OF PUBLISHED STANDARDS

Page No : 15 Of 15 Total Count: 144

Committee SANS Date Latest Reaffirmation Review/

Number Number Int Ed Ed Sansified Title Approved Amendment due Revision

SABS/TC 073 SANS 301489-25:2006/ETSI EN 301489-25:2005 V2.3 2 Y Electromagnetic compatibility and Radio 2006-07-07 2016-02-04
.2 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 25: Specific
conditions for CDMA 1x spread spectrum
Mobile Stations and ancillary equipment
SANS 301489-26:2005/ETSI EN 301489-26:2005 V2.3 1 Y Electromagnetic compatibility and Radio 2005-12-14 2015-03-11
.2 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services Part 26: Specific
conditions for CDMA 1x spread spectrum
Base Stations, repeaters and ancillary
equipment
SANS 301843-1:2005/ETSI EN 301843-1:2004 V1.2 1 Y Electromagnetic compatibility and Radio 2005-09-30 2015-03-05
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for marine
radio equipment and services; Part 1:
Common technical requirements
SANS 301843-2:2005/ETSI EN 301843-2:2004 V1.2 1 Y Electromagnetic compatibility and Radio 2005-09-16 2015-03-05
.1 spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for marine
radio equipment and services Part 2: Specific
conditions for VHF radiotelephone
transmitters and receivers

Amendment Notes: N - National or I - International A - Amendment, AC - Corrigendum on Amendment, C - Corrigendum, D - Addendum, E - Erratum, I - Information Sheet, K - Collective Amendment, S - Supplemen