Scribd Logo
Upload

Welcome to Scribd!

  • 75 views

    ZXSDR B8200 Hardware

    Uploaded by

    Iyesusgetanew
    The document discusses boards and modules for the ZXSDR B8200 baseband unit, which follows the MicroTCA architecture standard. MicroTCA is based on PICMG and improves upon ATCA by being smaller, lower cost, and more flexible, making it suitable for base station equipment. The ZXSDR B8200 comes in full-height double modules and half-height single modules as defined by the MicroTCA specification. It contains various control, processing, interface, and fan boards to support GSM, UMTS, LTE and other standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ZXSDR B8200 Hardware

    Uploaded by

    Iyesusgetanew
    75 views3 pages
    The document discusses boards and modules for the ZXSDR B8200 baseband unit, which follows the MicroTCA architecture standard. MicroTCA is based on PICMG and improves upon ATCA by being smaller, lower cost, and more flexible, making it suitable for base station equipment. The ZXSDR B8200 comes in full-height double modules and half-height single modules as defined by the MicroTCA specification. It contains various control, processing, interface, and fan boards to support GSM, UMTS, LTE and other standards.

    Original Description:

    B8200

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses boards and modules for the ZXSDR B8200 baseband unit, which follows the MicroTCA architecture standard. MicroTCA is based on PICMG and improves upon ATCA by being smaller, lower cost, and more flexible, making it suitable for base station equipment. The ZXSDR B8200 comes in full-height double modules and half-height single modules as defined by the MicroTCA specification. It contains various control, processing, interface, and fan boards to support GSM, UMTS, LTE and other standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    75 views3 pages

    ZXSDR B8200 Hardware

    Uploaded by

    Iyesusgetanew
    The document discusses boards and modules for the ZXSDR B8200 baseband unit, which follows the MicroTCA architecture standard. MicroTCA is based on PICMG and improves upon ATCA by being smaller, lower cost, and more flexible, making it suitable for base station equipment. The ZXSDR B8200 comes in full-height double modules and half-height single modules as defined by the MicroTCA specification. It contains various control, processing, interface, and fan boards to support GSM, UMTS, LTE and other standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Boards and Modules

    The ZXSDR B8200 is a baseband unit designed on the basis of the MicroTCA architecture. MicroTCA, also known as μTCA, is based on the PICMG standard. It originates
    from ATCA and improves upon ATCA. Compared with ATCA, the MicroTCA architecture is smaller in size, lower in costs, and more flexible. Thus MicroTCA is more suitable
    for devices at the base station side.

    In accordance with the MicroTCA specification, the ZXSDR B8200 modules have two height types: full height (Double Modules) and half height (Single Module). For the
    definitions of full height and half height in the MicroTCA specification and the corresponding boards/modules, refer to Table 1.

    Table 1 Definition of Full Height and Half Height in the MicroTCA Specification and Corresponding Boards/Modules

    Name Height (mm) Corresponding Board/Module

    Full height (Double Modules) 148.8 CC/FS/UBPG/BPK/BPx/UES/UCI/TAM

    Half height (Single Module) 73.8 PM/SA/SE/FAM

    Note:

    BPx indicates a BPL-type board, such as BPN0, BPN0A, and BPN2.

    The ZXSDR B8200 contains the control and clock board, fiber switch board, baseband processing board, site alarm board, site alarm extension board (optional), universal
    Ethernet switch board (optional), tower-mounted amplifier control module (optional), power module, and fan module. For the board/module list, refer to Table 2.

    Table 2 Boards of the ZXSDR B8200

    Board Name GSM/UMTS/LTE Mode LTE Mode

    CC2/CC16B/CCE1 Yes Yes

    FS3/FS3A/FS5/CR0 Yes Yes

    UBPG/UBPG3 Yes No

    BPK_e1/BPK_e/BPK_d Yes No

    BPN0A/BPN0 Yes Yes

    SA Yes Yes

    SE Yes Yes

    UES Yes Yes

    UCI Yes Yes

    TAM Yes Yes

    PM Yes Yes

    FAM Yes Yes

    Sub-topics:
    F Power Module (PM)
    F Control and Clock (CC) Module
    F Universal Baseband Processing Board for GSM (UBPG/UBPG3)
    F UMTS Baseband Processing Board (BPK_e1/BPK_e/BPK_d)
    F LTE Baseband Processing Board (BPN0A/BPN0)
    F Baseband Processing Board Type N2 (BPN2)
    F Fabric Switch Module (FS)
    F Site Alarm (SA) Board
    F Site Alarm Extender (SE) Board
    F Universal Ethernet Switch Board (UES)
    F Universal Clock Interface (UCI/UCI-C) Board
    F Fan Module (FAM)
    F Tower Mounted Amplifier Control Module (TAM)
    F Blank Panel

    You might also like