RTTS Circulating Valves: The Table Below Lists The Tools and Charts That Appear in Section 2a

Download as pdf or txt
Download as pdf or txt
You are on page 1of 52

Part

Note: Where available, SAP numbers are listed first for the parts and tools in this
section. Former (legacy) part numbers are listed in parentheses. N/A in place of the
SAP number denotes that a SAP number has not yet been assigned for that part. 2a
RTTS Circulating Valves
The table below lists the tools and charts that appear in Section 2a.

Topic Page
General 2
Prejob Considerations 2
Paint and Coating Policy 2
Paint and Coating Specifications 2
Lubrication for Sour-Gas Tools 3
Lubrication for Downhole Tools 3
Operating Procedure for the RTTS Circulating Valve 3
Procedure for Running in the Hole 4
Procedure to Reopen the Valve if It Is Accidentally Closed 4
Procedure for Spotting Cement or Other Fluids 4
Procedure for Opening the Circulating Valve for Coming Out of the Hole 4
Maintenance Procedure for the RTTS Circulating Valve 4
Minimum Flow Areas of RTTS Circulating Valves 5
RTTS Circulating Valves—Optional Top Adapters 6
RTTS Circulating Valves—Optional Lower Bodies 7
101008113 (696.421)—RTTS Circulating Valve—2 3/8 in.—1.05-in. OD 10-rd EUE tubing thread (top) 8
7 10
101200119 (696.431)—RTTS Circulating Valve—2 /8 in.—1.315-in. OD 10-rd EUE tubing thread (top)
1 12
N/A (696.441)—RTTS Circulating Valve—3 /2 in.—1.315 OD 10-rd EUE tubing thread (top)
3 14
100069975 (696.481)—RTTS Circulating Valve—4 in.—2 /8-in. 8-rd EUE tubing thread (top)
100070008 (696.511)—RTTS Circulating Valve—4 1/2 to 5 in.—2 3/8-in 8-rd EUE tubing thread (top) 16
100012514 (696.5218)—RTTS Circulating Valve—4 1/2 to 5 in.—Long Stroke, 2 3/8-in. 8-rd tubing thread (top) 18

100012520 (696.531)—RTTS Circulating Valve—5 1/2 to 6 5/8 in.—2 3/8-in. 8-rd EUE tubing thread (top) 20
100070073 (696.5318)—RTTS Circulating Valve—5 1/ to 6 5/ in.—Long Stroke, 2 3/ 22
2 8 8-in. 8-rd tubing thread (top)
1 5
100070067 (696.5312)—RTTS Circulating Valve—5 /2 to 6 /8 in.—Automatic J-slot, 2 3/8-in. 8-rd tubing thread (top) 24
1 5 3 26
N/A (696.5313)—RTTS Circulating Valve—5 /2 to 6 /8 in.—Straight J-slot, 2 /8-in. 8-rd tubing thread (top)
5 7 28
100070145 (696.571)—RTTS Circulating Valve—7 to 7 /8 in.—2 /8-in. 8-rd EUE tubing thread (top)
N/A (696.57175)—RTTS Circulating Valve—7 to 7 5/ in.—3 1/ 31
8 2-in. API IF connections (top and bottom)
5 7 34
100070159 (696.57172)—RTTS Circulating Valve—7 to 7 /8 in.—3 /8-in. 6-stub Acme special tool-joint connections
5 7 37
N/A (696.5718)—RTTS Circulating Valve—7 to 7 /8 in.—Long Stroke, 2 /8-in. 8-rd tubing thread (top)

September 14, 2001 Page 1 of 52 Section 2–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

100070157 (696.5716)—RTTS Circulating Valve—7 to 7 5/8 in.—Long Stroke, 3 7/8-in. 6-stub Acme special tool-joint top
39
connection (top)
N/A (696.5713)—RTTS Circulating Valve—7 to 7 5/8 in.—Automatic J-slot with 2 7/8-in. 8-rd tubing thread (top) 41
100070278 (696.601)—RTTS Circulating Valve—8 5/ to 20 in.—4 1/ -in. IF thread (top and bottom) 44
8 2
5 1 46
100070285 (696.6018)—RTTS Circulating Valve—8 /8 to 20 in.—Long Stroke, 4 /2-in. IF thread (top and bottom)
5 7 48
N/A (696.6017)—8 /8 to 20 in.—Long Stroke, 3 /8-in. 6-stub Acme special tool-joint top connection (top)
100070280 (696.6016)—8 5/8 to 20 in.—Long Stroke, Big Ports with 4 1/2-in. IF thread (top and bottom) 50

General Paint and Coating Specifications


The RTTS Circulating Valve is a locked-open/locked- All Halliburton Energy Services, Inc., service tools and
closed valve that serves as both a circulating valve and downhole service tools (DST) should be painted
a bypass. This valve was designed for use with the completely red unless
RTTS Packer. The RTTS Circulating Valve is automat-
ically locked in the closed position when the packer is • The customer does not permit paint to be used. In
set. During testing and squeezing operations, the lock this case, the tools should have a clear coating.
helps prevent the valve from being pumped open. • A special assembly is used. In this case, the bottom
of the assembly can be painted gray. Such special
A straight J-slot is provided in the locked-open posi- assemblies should be tagged.
tion so that it can be used with the straight J-slot in
the packer body. This combination eliminates the • The equipment is used in a sour gas environment.
need to turn the tubing to close the circulating valve In this case, the equipment should be painted sour-
or to reset the packer after the tubing has been gas green.
displaced with cement. Halliburton® uses Jones Blair latex paint (HMX 112-
15D) for the red, gray, and green paint.
Prejob Considerations
Two clear coatings currently used are Enses K clear
coating, a Shell product now in use in the Europe-
Paint and Coating Policy Africa Region, and Aeroguard W600 clear coating,
All Halliburton Energy Services® service tools and which is manufactured by Aero Cote Co. of Houston,
DST tools should be painted completely red except TX. Aero Cote paint is being tested along the Gulf-
under the following conditions: Coast. Enses K clear coating is not available in the U.S.
Table 2a.1 lists paint and coating part numbers.
• Customer requirements do not permit paint to be
used. In this case, the tools should have a clear
coating.
• A special assembly is used. In this case, the bottom
of the assembly can be painted gray. Such special
assemblies should be tagged.
• The equipment is used in a sour gas environment.
In this case, the equipment should be painted sour-
gas green.

Section 2a–RTTS Circulating Valves Page 2 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

. Lubrication for Downhole Tools


Table 2a.1Paint and Coatings Pro-Long Plug grease (SAP No. 100066644; Legacy
for Service and DST Tools No. 626.00001) is recommended for general purpose
lubrication. It is more expensive than regular greases,
Part
Description but it may save money over time because it is a high-
Number
quality product for corrosion protection in downhole
CHEMO-O-PLEX—Jones Blair
100002066 and offshore drilling applications.
(70.35158) Red downhole tool paint—acrylic latex, water-
reducible
The other lubricants listed in Table 2a.3 have also
CHEM-O-PLEX—Jones Blair
100012961 performed well, especially for use at temperatures
(70.35159) Gray downhole tool paint—acrylic latex, water- higher than 250°F.
reducible
CHEM-O-PLEX—Jones Blair Table 2a.3—Recommended Lubricants for
100022691
Sour-gas green downhole tool paint—acrylic Downhole Tools
(70.14131)
latex, water-reducible
100001558 Aeroguard W600—Aero Cote Part Number Description Quantity
(70.14132) Clear downhole tool coating 100066644
Pro-Long Plug grease 40-lb pail
(626.00001)
100047822
Lubrication for Sour-Gas Tools (130.13049)
Lubri-Plate 930 AA 1-lb can
(626.XXXXX and 627.XXXXX series) 100021245
Lubri-Plate 930 AA 14.5-oz carton
718 high-nickel alloy threads are very susceptible to (70.05117)
galling. A baked-on coating applied in Duncan protects 100026246
Litholine No.3 44-gal drum
(70.31233)
the threads as long as it remains in place. To help
prevent thread galling on sour-gas tools, use one of the
lubricants listed in Table 2a.2, Page 3. Operating Procedure for the RTTS
Circulating Valve
Table 2a.2—Recommended Lubricants for
Sour-Gas Toolsa Note—Consult your local Best Practices Manual for
operating instructions. If no Best Practices Manual is
Part Number Description Quantity available, the following instructions can be used as a
100066644 guideline. Location, conditions, and other factors must
Pro-Long Plug grease 40-lb pail
(626.00001) be considered when operating the tool.
100066645
Petrolon S-50 grease 35-lb pail
(626.00002) The RTTS Circulating Valve may be run directly above
100066646 the packer body or farther up the workstring. The oper-
896 grease 5-gal pail
(626.00003)b ating principle is based on lug movements in a J-slot.
100066647 The lugs move with workstring manipulation. When
Pro-Long EP2 Plus 1-gal container
(626.00004)
the lug is in the upper position, the circulating valve is
100066648
(626.00005)
Petrolon Slick 50 14-oz tube open; when the lug is in the lower position, the circu-
aPetrolon lating valve is closed. The RTTS Circulating Valve is
S-50 EP or Molub-Alloy 936 greases can also be
used, but they are not stocked in Duncan.
normally used in the following sequence:
b896 grease costs about 60% more than Pro-Long Plug
1. Run in the hole.
grease or Petrolon S-50 grease.
2. Set the RTTS Packer.
3. Spot cement or acid, if necessary.
4. Perform the test, treat, or squeeze job.
5. Pull out of the hole.

September 14, 2001 Page 3 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

See the RTTS Packer operating procedure for a 3. Slack off until the tool starts taking weight.
complete description of each sequence. Following are
4. Relieve the torque by turning the tubing to the
the instructions for operating the RTTS Circulating
left.
Valve only.
5. Continue to slack off until the proper weight is on
the packer; this leaves the circulating valve in the
Caution—Be aware of trapped or residual torque locked-closed position.
when applying torque to the workstring. Make sure
the area is clear of nonessential personnel. Sudden With the RTTS Packer set and the circulating valve
release of trapped or residual torque can cause locked closed, you are ready to begin test, treat, or
damage to equipment and possible injury to squeeze operations.
personnel.
Procedure for Opening the Circulating
Valve for Coming Out of the Hole
Procedure for Running in the Hole
1. Lower the tubing.
1. Lock the valve open.
2. Turn the tubing to the right.
2. Place the J-slot of the RTTS packer in the
locked position. Note—The circulating valve is hard to open while there
3. Run in the hole. When making up the workstring, is a differential pressure across the tool because the
avoid slippage of the backups. Slippage tends to differential pressure acting on the lug mandrel pushes
move the RTTS Packer out of the locked, unset the mandrel up against the J-slot.
position and cause the circulating valve to close.
3. Turn the tubing to the left to lock the circulating
Circulating-valve closure is indicated by the
valve in the open position.
tubing’s running over.
4. Pick up the tubing.
Procedure to Reopen the Valve See “Operating Procedure for the RTTS Packer” in
If It Is Accidentally Closed Section 2e.
1. Lower the tubing.
2. Turn the tubing to the right.
Maintenance Procedure for the
RTTS Circulating Valve
3. Raise the tubing a few feet.
See “Maintenance Procedures Manual Section 2a” in
4. Rotate the tubing to the left. the Section 2 Appendix.

Procedure for Spotting Cement


or Other Fluids
1. Open the circulating valve by turning the tubing
to the right and lifting to tubing weight.
2. Pump the fluid to place.

Section 2a–RTTS Circulating Valves Page 4 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

Minimum Flow Areas


Table 2a.4 lists the minimum flow areas of RTTS
Circulating Valves.

Table 2a.4—Minimum Flow Areas of RTTS Circulating Valves


Assembly Part No. Size Area
Location
SAP (Legacy) (in.) (in.2) (cm2)
101008113 (696.421) 2 3 /8 0.363 2.34 ID
101200119 (696.431) 2 7 /8 0. 713 4.60 Slots
N/A (696.441) 3 1 /2 0.594 3.83 ID
100069975 (696.481) 4 1.741 11.23 Slots
100070008 (696.511) 4 1/2 to 5 2.089 13.48 Slots

100012514 (696.5218) 4 1/2 to 5 2.089 13.48 Slots

100012520 (696.531) 5 1/2 to 6 5/8 2.786 17.97 Slots

100070073 (696.5318) 5 1/2 to 6 5/8 2.786 17.97 Slots

100070067 (696.5312) 5 1 /2 2.786 17.97 Slots

N/A (696.5313) 5 1/2 to 6 5/8 2.786 17.97 Slots

100070145 (696.571) 7 to 7 5/8 2.786 17.97 Slots

N/A (696.57175) 7 to 7 5/8 2.786 17.97 Slots

100070159 (696.57172) 7 to 7 5/8 2.786 17.97 Slots

N/A (696.5718) 7 to 7 5/8 2.786 17.97 Slots


100070157 (696.5716) 7 2.786 17.97 Slots
N/A (696.5713) 7 2.786 17.97 Slots
100070278 (696.601) 8 5/8 to 13 3/8 4.178 26.95 Slots

100070285 (696.6018) 5 3 4.178 26.95 Slots


8 /8 to 13 /8
N/A (696.6017) 8 5/8 to 13 3/8 4.178 26.95 Slots

100070280 (696.6016) 5 3 7.068 45.60 ID


8 /8 to 13 /8

September 14, 2001 Page 5 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

Optional Top Adapters for RTTS


Circulating Valves
Table 2a.5 lists the optional top adapters of RTTS
Circulating Valves.

Table 2a.5—Optional Top Adapters for RTTS Circulating Valves


Lower Body Circulating Valve Packer Casing Lower Thread
Upper Thread Box
Part No. Size (in.) Part No. Size (in.) Box
N/A 101200119
2 7/8 2 7/8 1 5/16-in. 12 UNS 1.90-in. OD—10-rd NU tubing
(696.43106) (696.431)
N/A N/A
3 1/2 3 1/2 1 7/16-in. 10 UNS 1.90-in. OD—10-rd NU tubing
(696.44106) (696.441)
101200188 N/A
3 1/2 3 1/2 1 7/16-in. 10 UNS 1.90-in. OD —10-rd EUE tubing
(696.44101) (696.441)
N/A 100069975
4 4 2-in. 10 UNS 2 3/8-in. Hydril PH-6 tubing
(696.48112) (696.481)
N/A 100070008
4 1/2 4 1/2 to 5 2 5/16-in. 10 UNS 2 3/8-in. Hydril PH-6 tubing
(696.51108) (696.511)
2 3/8-in. 8-rd EUE tubing with
100070021 1/ 100070008 1/ 5/
4 2 4 2 to 5 2 16-in. 10 UNS 1.78-in. ID seat for 2 3/8-in. RFC®
(696.52012) (696.511)
valve
100012313 100012520
5 1/2 5 1/2 to 6 5/8 2 9/16-in. 10 UNS 2 7/8-in. 8-rd EUE tubing
(602.05003) (696.531)
N/A 100012520
5 1/2 5 1/2 to 6 5/8 2 9/16-in. 10 UNS 2 3/8-in. Hydril PH-6 tubing
(696.53124) (696.531)
N/A 100012520 2 3/8-in. 8-rd EUE tubing with
5 1/2 5 1/2 to 6 5/8 2 9/16-in. 10 UNS
(696.53002) (696.531) 1.78-in. ID seat for 2 3/8-in. RFC valve
2 7/8-in. 8-rd EUE tubing with
100070060 100012520 1.78-in. ID seat for 2 3/8-in. RFC valve,
5 1/2 5 1/2 to 6 5/8 2 9/16-in. 10 UNS
(696.53014) (696.531) and 2.28-in. ID seat for 2 7/8-in. RFC
valve
N/A 100070145
7 7 to 7 5/8 2 15/16-in. 10 UNS 2 3/8-in. 8-rd EUE tubing
(603.28004) (696.571)
N/A 100070145
7 7 to 7 5/8 2 15/16-in. 10 UNS 3 1/2-in. 8-rd EUE tubing
(696.57014) (696.571)
N/A 100070145
7 7 to 7 5/8 2 15/16-in. 10 UNS 3 1/2-in. VAM tubing
(696.57002) (696.571)
100003928 100070145
7 7 to 7 5/8 2 15/16-in. 10 UNS 3 1/2-in. API IF tool joint
(603.29109) (696.571)
2 7/8-in. 8-rd EUE tubing with
100070130 100070145 1.78-in. ID seat for 2 3/8-in. RFC valve,
7 7 to 7 5/8 2 15/16-in. 10 UNS
(696.57012) (696.571) and 2.28-in. ID seat for 2 7/8-in. RFC
valve
N/A 100070278
8 5/8 8 5/8 to 13 3/8 3 13/16-in. 10 UNS 4 1/2-in. extra-hole tool joint
(602.05222) (696.601)
N/A 100070278
8 5/8 8 5/8 to 13 3/8 3 13/16-in. 10 UNS 3 1/2-in. API IF tool joint
(602.05219) (696.601)
N/A 100070278
8 5/8 8 5/8 to 13 3/8 3 13/16-in. 10 UNS 5 1/2-in. API full-hole tool joint
(602.05213) (696.601)

Section 2a–RTTS Circulating Valves Page 6 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

Optional Lower Bodies for RTTS


Circulating Valves
Table 2a.6 lists the optional lower bodies of RTTS
Circulating Valves.

Table 2a.6—Optional Lower Bodies for RTTS Circulating Valves


Lower Body Circulating Valve Packer Casing Lower Thread Upper Thread
Part No. Size (in.) Part No. Size (in.) Pin Pin
101200343 100069975
4 4 2 5/16-in. 6-stub Acme 2 11/16-in. 10 UNS
(696.48111) (696.481)
N/A
3 1/2-in. 8 UN
(696.51111) 1 100070008 1
4 /2 4 /2 to 5
N/A (696.511)
2 3/8-in. 8-rd EUE tubing 33 1/2-in. 10 UNS
(696.51107)
N/A 100012520
5 1/2 5 1/2 to 65/8 4 5/32-in. 8 UNS
(696.53111) (696.531)
N/A
5 1/32-in. 8 UNS
(696.57111)
100070148
3 1/2-in. API IF tool joint
(696.57115) 100070145
7 7 to 7 5/8 4 5/32-in. 8 UNS
N/A (696.571)
4 1/2-in. API IF tool joint
(696.57116)
100070150
3 7/8-in. CAS tool joint
(696.57124)
N/A
3 7/8-in. 6-stub Acme special tool joint
(696.60111) 5/ 100070278 5/ 3/
8 8 88 8 to 13 8 4 29/32-in. 8 UNS
N/A (696.601) 1/ -in.
5 32 8 UNS
(696.60109)

September 14, 2001 Page 7 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

1.66" OD 1.05" OD - 10 round


(42.2 mm) EUE tubing thread

3.80"
(96.5 mm)

1 1/32" - 8 stub Acme thread

4
1.68" OD
(42.7 mm)

5
3.50"
(88.9 mm)
Travel

18.42"
(467.9 mm)

1.06" OD
(27.0 mm)

7.48"
(190.0 mm)

0.68" ID
(17.3 mm) J-slot
6

1 7/16" - 8 stub Acme thread

1.06" OD
(27.0 mm)

8 2

3.81"
(96.8 mm)

1 7/16" - 8 stub Acme thread

1.62" OD
(41.1 mm)
10

3.33"
(84.6 mm)

1.05" OD - 10 round EUE


tubing thread
1.12"
(28.4 mm)
1

SAP No.: 101008113 RTTS Circulating Valve Mandrel OD Areas


(696.421) Mandrel OD (in.) 2
Mandrel OD Area (in )
RTTS Circulating Valve 1.060 0.882
2 3/8 in.
1.05-in. OD 10-rd EUE tubing thread (top)
Section 2a–RTTS Circulating Valves Page 8 of 52 September 14, 2001
Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 101008113


(696.421)
RTTS Circulating Valve
2 3/8 in.
1.05-in. OD 10-rd EUE tubing thread (top)

Parts List—101008113 (696.421)


Part No. Number
# Description
SAP (Legacy) Required
1 N/A (696.42106) 1 Top coupling
2 100001933 (70.33930) 1 O-ring
3 100001935 (70.33934) 1 O-ring
4 N/A (696.42150) 1 J-slot sleeve
5 101008115 (696.42103) 1 Mandrel
6 100026677 (70.33418) 1 O-ring
7 101008116 (696.42105) 1 Body
8 100001937 (70.33937) 2 O-ring
9 100001951 (70.33962) 1 O-ring
10 100069928 (696.42141) 1 Lower body

# Notes—101008113 (696.421)

1 Optional thread protector: N/A (696.42142)


2 Optional fluorocarbon O-ring: 100064810 (600.33937)

Data for Steel Components of New Toolsa


Tensile strength (lb) 31,900
Burst (psi) 11,600
Collapse (psi) 9,900
aThis data is valid only for new tools, direct from the manufacturing
facility.

September 14, 2001 Page 9 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

1.90" OD 1.315" OD - 10 round


(48.3 mm) EUE tubing thread

1 2

4.05"
(102.8 mm)

1 5/16" - 12 UN thread

1.90" OD 3
(48.3 mm)

5
3.60"
(91.4 mm)
Travel

19.15"
(486.4 mm)

7.48"
(190.0 mm)

1.00" ID
(25.4 mm) J-slot
3

1 11/16" - 18 UNEF thread

1.35" OD
(34.3 mm)

7 3
3.66"
(93.0 mm)

1 11/16" - 18 UNEF thread

2.15" OD
(54.6 mm)
9

10

1
1.94"
(49.3 mm)
1 7/8" - 12 UN thread
0.96" ID
(24.4 mm)

SAP No.: 101200119


(696.431) RTTS Circulating Valve Mandrel OD Areas
2
Mandrel OD (in.) Mandrel OD Area (in )
RTTS Circulating Valve
1.350 1.431
2 7/8 in.
1.315-in. OD 10-rd EUE tubing thread (top)

Section 2a–RTTS Circulating Valves Page 10 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 101200119


(696.431)
RTTS Circulating Valve
2 7/8 in.
1.315-in. OD 10-rd EUE tubing thread (top)

Parts List—101200119 (696.431)


Part No. Number
# Description
SAP (Legacy) Required
1 101200120 (696.43101) 1 Top adapter
2 100001950 (70.33961) 1 O-ring
3 100001925 (70.33913) 2 O-ring
4 101200123 (696.4315) 1 J-slot sleeve
5 101200121 (696.43103) 1 Mandrel
6 101200122 (696.43105) 1 Body
7 100012934 (70.33599) 2 O-ring
8 100001926 (70.33914) 1 O-ring
9 100069932 (696.43109) 1 Lower body
10 100001995 (70.34021) 1 O-ring

# Notes—101200119 (696.431)

1 Optional thread protector: N/A (70.37027)


Optional top adapter:
N/A (696.43106)—1.90-in. 10-rd NU tubing thread—2.20-in.
2
(55.9-mm) OD x 1.00-in. (25.4-mm) ID. 4.50-in. (114.3-mm)
overall length.
3 Optional fluorocarbon O-ring: N/A (600.33599)

Data for Steel Components of New Toolsa


Tensile strength (lb) 37,500
Burst (psi) 8,100
Collapse (psi) 7,800
aThis data is valid only for new tools, direct from the manufacturing
facility.

September 14, 2001 Page 11 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

1.90" OD 1 1
(48.3 mm)

1.315" OD - 10 round
EUE tubing thread

4.87"
(123.7 mm)

2
1.00" ID
(25.4 mm)
1 7/16" - 10 UNS thread

2.25" OD
(57.2 mm)
3

4
3.60"
(91.4 mm)
Travel

20.08"
(510.0 mm)

7.08"
(179.8 mm)
J-slot
3

1 31/32" - 12 UNS thread

2.25" OD
(57.2 mm)

6 3
4.46"
(113.3 mm)
7

1 31/32" - 12 UNS thread

2.37" OD
(60.2 mm)
9

0.87" ID
(60.2 mm)
8

1.98" 1 7/8" - 12 UN thread


(50.3 mm)

SAP No.: N/A


(696.441) RTTS Circulating Valve Mandrel OD Areas
RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
3 1/2 in. 1.440 1.629

1.315 OD 10-rd EUE tubing thread (top)

Section 2a–RTTS Circulating Valves Page 12 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: N/A


(696.441)
RTTS Circulating Valve
3 1/2 in.
1.315 OD 10-rd EUE tubing thread (top)

Parts List—N/A (696.441)


Part No. Number
# Description
SAP (Legacy) Required
1 101200137 (696.44002) 1 Top adapter
2 100001951 (70.33962) 1 O-ring
3 100001953 (70.33965) 2 O-ring
4 101200186 (696.4405) 1 J-slot sleeve
5 101200138 (696.44003) 1 Mandrel
6 100001954 (70.33967) 3 O-ring
7 101200139 (696.44005) 1 Body
8 100001995 (70.34021) 2 O-ring
9 101200189 (696.44109) 1 Lower body

# Notes—N/A (696.441)

Optional top adapters:


101200188 (696.44101)—1.90-in. 10-rd EUE tubing thread. This
part is 2.50-in. (63.5-mm) OD x 0.87-in. (22.1-mm) ID. 4.70-in.
1 (119.4-mm) overall length.
N/A (696.44106)—1.90-in. 10-rd NU tubing thread. This part is
2.20-in. (55.9-mm) OD x 0.87-in. (22.1-mm) ID. 4.70-in. (119.4-
mm) overall length.
2 Optional thread protector: N/A (70.37027)
3 Optional fluorocarbon O-ring: 100064833 (600.33967)

Data for Steel Components of New Toolsa


Tensile strength (lb) 52,500
Burst (psi) 10,000
Collapse (psi) 12,400
aThis data is valid only for new tools, direct from the manufacturing
facility.

September 14, 2001 Page 13 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

3.06" OD 1 1
(77.7 mm)

2 3/8" OD - 8 round EUE tubing thread

6.12"
(155.4 mm)

2
1.50" ID
(38.1 mm)
2" - 10 UNS thread

3.06" OD
(77.7 mm)
3

4
10.58"
(268.7 mm)
Travel

39.76"
(1009.9 mm)

16.85"
(428.0 mm)
J-slot
3

2 11/16" - 10 UNS thread

3.06" OD
(77.7 mm)

6 3
7.93"
(201.4 mm)
7

2 11/16" - 10 UNS thread

3.06" OD
(77.7 mm)
9 2

1.50" ID
(38.1 mm)
8

3.44" 2 11/16" - 10 UNS thread


(87.4 mm)

SAP No.: 100069975


(696.481) RTTS Circulating Valve Mandrel OD Areas
2
Mandrel OD (in.) Mandrel OD Area (in )
RTTS Circulating Valve
2.000 3.142
4 in.
2 3/8-in. 8-rd EUE tubing thread (top)

Section 2a–RTTS Circulating Valves Page 14 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100069975


(696.481)
RTTS Circulating Valve
4 in.
2 3/8-in. 8-rd EUE tubing thread (top)

Parts List—100069975 (696.481)


Part No. Number Description
# Required
SAP (Legacy)
1 100069967 (696.48001) 1 Top adapter
2 100001995 (70.34021) 1 O-ring
3 100001997 (70.34023) 2 O-ring
4 100069973 (696.4805) 1 J-slot sleeve
5 100069968 (696.48003) 1 Mandrel
6 100009540 (696.48006) 3 O-ring
7 100069969 (696.48005) 1 Body
8 100002001 (70.34027) 2 O-ring
9 100069992 (696.49709) 1 Lower body

# Notes—100069975 (696.481)

Optional top adapters:


N/A (696.48112)—2 3/8-in. Hydril PH-6 tubing thread. This part is
1
3.06-in. (77.5-mm) OD x 1.60-in. (40.6-mm) ID. 7.00-in. (177.8-mm)
overall length.
To use 100069975 (696.481) on 4-in. Model 2 RTTS (SAP:
101200345— Legacy: 696.485):
• Use lower body 101200343 (696.48111)—2 5/16-in. 6-stub Acme
pin thread.
2 This part is 2.69-in. (68.3-mm) OD x 1.42-in. (36.1-mm) ID. 10.00-in.
(254.0-mm) makeup length.
• Remove top adapter 101200265 (696.48564) from the RTTS
packer.
• One O-ring 100001998 (70.34024) is required.
3 Optional fluorocarbon O-ring: N/A (600.33605)

Data for Steel Components of New Toolsa


Tensile strength (lb) 92,200
Burst (psi) 8,100
Collapse (psi) 13,700
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 15 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

3.45" OD 2 3/8" OD - 8 round EUE tubing thread


(87.6 mm)

1 2

6.12"
(155.4 mm)

2 5/16" - 10 UNS thread

3.56" OD
(90.4 mm) 3

4 4
6.60"
(167.6 mm)
Travel

32.23"
(818.6 mm)

1.90" ID
(48.3 mm)
12.87"
(326.9 mm)
J-slot
3

3 3/32" - 10 UNS thread

2.31" OD
(58.7 mm)

6 5
8.12"
(206.2 mm)
7

3 3/32" - 10 UNS thread

3.60" OD
(91.4 mm)
9 3

1.80" OD
(45.7 mm)
10

3 3/32" - 10 UNS thread


3.45"
(87.6 mm)
1

SAP No.: 100070008


Approx. shipping weight: 63 lb (696.511) RTTS Circulating Valve Mandrel OD Areas
RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
4 1/2 to 5 in. 2.310 4.191
3
2 /8-in. 8-rd EUE tubing thread (top)

Section 2a–RTTS Circulating Valves Page 16 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100070008


(696.511)
RTTS Circulating Valve
4 1/2 to 5 in.
3
2 /8-in. 8-rd EUE tubing thread (top)

Parts List—100070008 (696.511)


Part No. Number Description
#
SAP (Legacy) Required

1 100012511 (696.52001) 1 Top adapter


2 100001998 (70.34024) 1 O-ring
3 100001961 (70.33974) 2 O-ring
4 100070028 (696.5207) 1 J-slot sleeve
5 100009398 (696.52003) 1 Mandrel
6 100004008 (696.52006) 3 O-ring
7 100012512 (696.52005) 1 Body
8 100002004 (70.34030) 1 O-ring
9 100012502 (696.51109) 1 Lower body
10 100001964 (70.33977) 1 O-ring

# Notes—100070008 (696.511)

1 Optional female handling sub: N/A (696.51115)


Optional top adapter:
N/A (696.51108)—2 3/8-in. Hydril PH-6 tubing thread. This part is
3.06-in. (77.7-mm) OD x 1.80-in. (45.7-mm) ID. 7.00-in. (177.8-mm)
overall length.
2
Optional top adapter with RFC® seat:
100070021 (696.52012)—2 3/8-in. 8-rd EUE tubing thread.
This part is 3.06-in. (77.7-mm) OD x 1.78-in. (45.2-mm) ID. 10.00-in.
(254.0-mm) overall length.
Optional lower bodies:
N/A (696.51107)—2 3/8-in. 8-rd EUE tubing thread. This part is
3.10-in. (78.7-mm) OD x 1.80-in.(45.7-mm) ID. 7.00-in. (177.8-mm)
3 makeup length.
N/A (696.51111)—3 1/2-in. 8 UN thread. This part is 4.18-in.
(106.2-mm) OD x 2.00-in. (50.8-mm) ID. 5.15-in. (130.8-mm)
makeup length. O-ring 100001967 (70.33980) is needed.
4 Optional straight J-slot sleeve: 100070026 (696.5206)
5 Optional fluorocarbon O-ring: 100064748 (600.33606)

Data for Steel Components of New Toolsa


Tensile strength (lb) 90,100
Burst (psi) 10,100
Collapse (psi) 11,500
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 17 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

3.45" OD 2 3/8" OD - 8 round EUE tubing thread


(87.6 mm)

1 2

6.12"
(155.4 mm)

2 5/16" - 10 UNS thread

3.56" OD
(90.4 mm) 3

4
12.60"
(320.0 mm)
Travel

44.23"
(1123.4 mm)

1.90" ID J-slot
(48.3 mm)
18.87"
(479.3 mm)

3 3/32" - 10 UNS thread

2.31" OD
(58.7 mm)

6 4
8.12"
(206.2 mm)
7

3 3/32" - 10 UNS thread

3.60" OD
(91.4 mm)
9 3

1.80" ID
(45.7 mm)
10

3 3/32" - 10 UNS thread


3.45"
(87.6 mm)
1

SAP No.: 100012514


(696.5218) RTTS Circulating Valve Mandrel OD Areas
Approx. shipping weight: 63 lb
RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
4 1/2 to 5 in. 2.310 4.191
3
Long Stroke, 2 /8-in. 8-rd EUE tubing thread
(top)
Section 2a–RTTS Circulating Valves Page 18 of 52 September 14, 2001
Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100012514


(696.5218)
RTTS Circulating Valve
4 1/2 to 5 in.
3
Long Stroke, 2 /8-in. 8-rd EUE tubing thread (top)

Parts List— 100012514 (696.5218)


Part No. Number
# Description
SAP (Legacy) Required
1 100012511 (696.52001) 1 Top adapter
2 100001998 (70.34024) 1 O-ring
3 100001961 (70.33974) 2 O-ring
4 101001815 (696.5007) 1 J-slot sleeve
5 100012515 (696.52182) 1 Mandrel
6 100004008 (696.52006) 3 O-ring
7 100012512 (696.52005) 1 Body
8 100002004 (70.34030) 1 O-ring
9 100070009 (696.51113) 1 Lower body
10 100001964 (70.33977) 1 O-ring

# Notes— 100012514 (696.5218)

1 Optional female handling sub: N/A (696.51115)


Optional top adapter:
N/A (696.51108)—2 3/8-in. Hydril PH-6 tubing thread. This part is
3.06-in. (77.7-mm) OD x 1.80-in. (45.7-mm) ID. 7.00-in. (177.8-mm)
overall length.
2
Optional top adapter with RFC® seat:
100070021 (696.52012)—2 3/8-in. 8-rd EUE tubing thread. This part
is 3.06-in. (77.7-mm) OD x 1.78-in. (45.2-mm) ID. 10.00-in.
(254.0-mm) overall length.
Optional lower body:
N/A (696.51114)—3 1/2-in. 8-UN thread. This part is 4.18-in.
3
(106.2-mm) OD x 2.00-in. (50.8-mm) ID. 10.90-in. (276.9-mm)
makeup length. Use O-ring 100001967 (70.33980).
4 Optional fluorocarbon O-ring: 100064748 (600.33606)

Data for Steel Components of New Toolsa


Tensile strength (lb) 85,000
Burst (psi) 10,100
Collapse (psi) 10,700
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 19 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

3.68" OD
(93.5 mm) 2 3/8" OD - 8 round EUE tubing thread

1 2
6.12"
(155.4 mm)

2 9/16" - 10 UNS thread

3.90" OD
(99.1 mm) 4

5
6.60"
(167.6 mm)
31.91" Travel
(810.5 mm)

1.99" ID
(50.5 mm)
6
12.87" J-slot
(326.9 mm) 3

3 1/2" - 10 UNS thread


2 5/16" - 10 UNS thread
7

2.62" OD
(66.5 mm) 8

9 4

8.12"
(206.2 mm)

10

3 1/2" - 10 UNS thread

4.18" OD
(106.2 mm)

11 3

12

3 1/2" - 8 UN thread
3.60" 2.00" ID
(91.4 mm) (50.8 mm)
1

SAP No.: 100012520


Approx. shipping weight: 75 lb (696.531) RTTS Circulating Valve Mandrel OD Areas
2
RTTS Circulating Valve Mandrel OD (in.) Mandrel OD Area (in )

5 1/2 to 6 5/8 in. 2.620 5.391


3
2 /8-in. 8-rd EUE tubing thread (top)

Section 2a–RTTS Circulating Valves Page 20 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100012520


(696.531)
RTTS Circulating Valve
5 1/2 to 6 5/8 in.
3
2 /8-in. 8-rd EUE tubing thread (top)

Parts List— 100012520 (696.531)


Part No. Number
# Description
SAP (Legacy) Required
1 100012517 (696.53001) 1 Top adapter
2 100002000 (70.34026) 1 O-ring
3 100001963 (70.33976) 2 O-ring
4 100012519 (696.5307) 1 J-slot sleeve
5 100004015 (696.53105) 1 Lug mandrel
6 100012944 (70.33919) 2 O-ring
7 100012518 (696.53005) 1 Body
8 100004016 (696.53106) 1 Port mandrel
9 100004079 (697.95603) 3 O-ring
10 100002008 (70.34034) 1 O-ring
11 100070065 (696.53109) 1 Lower body
12 100001967 (70.33980) 1 O-ring

# Notes—100012520 (696.531)

1 Optional female handling sub: N/A (696.53039)


Optional top adapters:
100012313 (602.05003)—2 7/8-in. 8-rd EUE tubing thread. This part is
3.75-in. (95.2-mm) OD x 2.00-in. (50.8-mm) ID. 6.50-in. (165.1-mm)
overall length.
N/A (696.53124)—2 3/8-in. Hydril PH-6 tubing thread. This part is
3.68-in. (93.5-mm) OD x 1.80-in. (45.7-mm) ID. 7.00-in. (177.8-mm)
overall length.
2
Optional top adapters with RFC® seats:
N/A (696.53002)—2 3/8-in. 8-rd EUE tubing thread. This part is 1.78-in.
(45.2-mm) ID x 3.68-in. (93.5-mm) OD. 10.00-in. (254.0-mm) overall
length.
100070060 (696.53014)—2 7/8-in. 8-rd EUE tubing thread.This part has
1.78-in. (45.2-mm) ID and 2.28-in. (57.9-mm) ID seats, and a
3.87-in. (98.3-mm) OD. 13.00-in. (330.2-mm) overall length.
Optional lower body:
N/A (696.53111)—4 5/32-in. 8 UNS thread. This part is 4.87-in.
3
(123.7-mm) OD x 2.25-in. (57.2-mm) ID. 6.40-in. (162.6-mm) makeup
length. O-ring 100001936 (70.33936) is needed.
4 Optional fluorocarbon O-ring: N/A (600.33608)

Data for Steel Components of New Toolsa


Tensile strength (lb) 150,700
Burst (psi) 10,000
Collapse (psi) 14,200
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 21 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

3.68" OD
(93.5 mm) 2 3/8" OD - 8 round
EUE tubing thread

1 2
6.12"
(155.4 mm)

2 9/16" - 10 UNS thread

3.90" OD
(99.1 mm) 4

5
12.60"
(320.0 mm)
43.91" Travel
(1115.3 mm)

J-slot
1.99" ID
(50.5 mm)
6
18.87"
(479.3 mm)
3

3 1/2" - 10 UNS thread


2 5/16" - 10 UNS thread
7

2.62" OD
(66.5 mm) 8

9 3

8.12"
(206.2 mm)

10

3 1/2" - 10 UNS thread

4.18" OD
(106.2 mm)

11

12

3 1/2" - 8 UN thread
2.00" ID
3.60" (50.8 mm)
(91.4 mm) 1

SAP No.: 100070073


(696.5318) RTTS Circulating Valve Mandrel OD Areas
Approx. shipping weight: 81 lb RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
5 1/2 to 6 5/8 in. 2.620 5.391

Long Stroke, 2 3/8-in. 8-rd EUE tubing thread


(top)
Section 2a–RTTS Circulating Valves Page 22 of 52 September 14, 2001
Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100070073


(696.5318)
RTTS Circulating Valve
5 1/2 to 6 5/8 in.
3
Long Stroke, 2 /8-in. 8-rd EUE tubing thread (top)

Parts List— 100070073 (696.5318)


Part No. Number
# Description
SAP (Legacy) Required
1 100012517 (696.53001) 1 Top adapter
2 100002000 (70.34026) 1 O-ring
3 100001963 (70.33976) 2 O-ring
4 100070071 (696.5317) 1 J-slot sleeve
5 100012521 (696.53185) 1 Lug mandrel
6 100012944 (70.33919) 2 O-ring
7 100012518 (696.53005) 1 Body
8 100012522 (696.53186) 1 Port mandrel
9 100004079 (697.95603) 3 O-ring
10 100002008 (70.34034) 1 O-ring
11 100070066 (696.53113) 1 Lower body
12 100001967 (70.33980) 1 O-ring

# Notes—100070073 (696.5318)

1 Optional female handling sub: N/A (696.53039)


Optional top adapters:
100012313 (602.05003)—2 7/8-in. 8-rd EUE tubing thread. This part is
3.75-in. (95.2-mm) OD x 2.00-in. (50.8-mm) ID. 6.50-in. (165.1-mm) overall
length.
N/A (696.53124)—2 3/8-in. Hydril PH-6 tubing thread. This part is 3.68-in.
(93.5-mm) OD x 1.80-in. (45.7-mm) ID. 7.00-in. (177.8-mm) overall length.
2
Optional top adapters with RFC® seats:
N/A (696.53002)—2 3/8-in. 8-rd EUE tubing thread. This part is 1.78-in.
(45.2-mm) ID x 3.68-in. (93.5-mm) OD. 10.00-in. (254.0-mm) overall length.
100070060 (696.53014)—2 7/8-in. 8-rd EUE tubing thread. This part has
1.78-in. (45.2-mm) ID and 2.28-in. (57.9-mm) ID seats, and a 3.87-in.
(98.3-mm) OD. 13.00-in. (330.2-mm) overall length.
3 Optional fluorocarbon O-ring: N/A (600.33608)

Data for Steel Components of New Toolsa


Tensile strength (lb) 150,700
Burst (psi) 10,000
Collapse (psi) 14,300
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 23 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

3.68" OD
(93.5 mm) 2 3/8" OD - 8 round
EUE tubing thread

1 2
6.12"
(155.4 mm)

2.00" ID
(50.8 mm) 2

2 9/16" - 10 UNS thread

3
3.87" OD
(98.3 mm)

6.62"
(168.2 mm) 5
Travel

31.91"
(810.5 mm)

12.87" 6
(326.9 mm)

1.99" ID 3 J-slot
(50.5 mm)

3 1/2" - 10 UNS thread


2 5/16" - 10 UNS thread

7
3.87" OD
(98.3 mm)

8.12" 8 4
(206.2 mm)

3 1/2" - 10 UNS thread

4.18" OD
(106.2 mm) 10

4.80"
(121.9 mm) 11 3

12

1
2.00" ID
3.60" (50.8 mm)
(91.4 mm) 3 1/2" - 8 UNS thread

SAP No.: 100070067


(696.5312) RTTS Circulating Valve Mandrel OD Areas
Approx. shipping weight: 75 lb RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
5 1/2 to 6 5/8 in. 2.620 5.391
3
Auto J-Slot, 2 /8-in. 8-rd EUE tubing thread
(top)
Section 2a–RTTS Circulating Valves Page 24 of 52 September 14, 2001
Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100070067


(696.5312)
RTTS Circulating Valve
5 1/2 to 6 5/8 in.
3
Auto J-Slot, 2 /8-in. 8-rd EUE tubing thread (top)

Parts List—100070067 (696.5312)


Part No. Number
# Description
SAP (Legacy) Required
1 100012517 (696.53001) 1 Top adapter
2 100002000 (70.34026) 1 O-ring
3 100001963 (70.33976) 2 O-ring
4 100070068 (696.53121) 1 Lug mandrel
5 100070069 (696.53122) 1 J-slot sleeve
6 100012944 (70.33919) 2 O-ring
7 100012518 (696.53005) 1 Body
8 100004079 (697.95603) 3 O-ring
9 100002008 (70.34034) 1 O-ring
10 100004016 (696.53106) 1 Port mandrel
11 100070065 (696.53109) 1 Lower body
12 100001967 (70.33980) 1 O-ring

# Notes—100070067 (696.5312)

1 Optional female handling sub: N/A (696.53039)


Optional top adapters:
100012313 (602.05003)—2 7/8-in. 8-rd EUE tubing thread. This
part is 3.75-in. (95.2-mm) OD x 2.00-in. (50.8-mm) ID. 6.50-in.
(165.1-mm) overall length.
N/A (696.53124)—2 3/8-in. Hydril PH-6 tubing thread. This part
is 3.68-in. (93.5-mm) OD x 1.80-in. (45.7-mm) ID. 7.00-in.
(177.8-mm) overall length.
2 Optional top adapters with RFC® seats:
N/A (696.53002)—2 3/8-in. 8-rd EUE tubing thread. This part is
1.78-in. (45.2-mm) ID x 3.68-in. (93.5-mm) OD.10.00-in.
(254.0-mm) overall length.
100070060 (696.53014)—2 7/8-in. 8-rd EUE tubing thread. This
part has 1.78-in. (45.2-mm) ID and 2.28-in. (57.9-mm) ID seats,
and a 3.87-in. (98.3-mm) OD. 13.00-in. (330.2-mm) overall
length.
Optional lower body:
N/A (696.53111)—4 5/32-in. 8 UNS thread. This part is 4.87-in.
3
(123.7-mm) OD x 2.25-in. (57.2-mm) ID. 6.40-in. (162.6-mm)
makeup length. O-ring 100001936 (70.33936) is needed.
4 Optional fluorocarbon O-ring: N/A (600.33608)

Data for Steel Components of New Toolsa


Tensile strength (lb) 150,700
Burst (psi) 10,000
Collapse (psi) 14,200
a
This data valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 25 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

3.68" OD
(93.5 mm) 2 3/8" OD - 8 round
EUE tubing thread

1 2
6.12"
(155.4 mm)

2 9/16" - 10 UNS thread

3.90" OD
(99.1 mm) 4

5
6.60"
(167.6 mm)
31.91" Travel
(810.5 mm)

1.99" ID
(50.5 mm)
6
12.87"
(326.9 mm) J-slot
3

3 1/2" - 10 UNS thread


2 5/16" - 10 UNS thread
7

2.62" OD
(66.5 mm) 8

9 4

8.12"
(206.2 mm)

10

3 1/2" - 10 UNS thread

4.18" OD
(106.2 mm)

11 3

12

3 1/2" - 8 UN thread
2.00" ID
3.60" (50.8 mm)
(91.4 mm) 1

SAP No.: N/A


(696.5313) RTTS Circulating Valve Mandrel OD Areas
Approx. shipping weight: 75 lb RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
5 1/2 to 6 5/8 in. 2.620 5.391

Straight J-Slot, 2 3/8-in. 8-rd EUE tubing thread


(top)
Section 2a–RTTS Circulating Valves Page 26 of 52 September 14, 2001
Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: N/A


(696.5313)
RTTS Circulating Valve
5 1/2 to 6 5/8 in.
3
Straight J-Slot, 2 /8-in. 8-rd EUE tubing thread (top)

Parts List—N/A (696.5313)


Part No. Number
# Description
SAP (Legacy) Required
1 100012517 (696.53001) 1 Top adapter
2 100002000 (70.34026) 1 O-ring
3 100001963 (70.33976) 2 O-ring
4 100012519 (696.53073) 1 J-slot sleeve
5 100004015 (696.53105) 1 Lug mandrel
6 100012944 (70.33919) 2 O-ring
7 100012518 (696.53005) 1 Body
8 100004016 (696.53106) 1 Port mandrel
9 100004079 (697.95603) 3 O-ring
10 100002008 (70.34034) 1 O-ring
11 100070065 (696.53109) 1 Lower body
12 100001967 (70.33980) 1 O-ring

# Notes—N/A (696.5313)

1 Optional female handling sub: N/A (696.53039)


Optional top adapters:
100012313 (602.05003)—2 7/8-in. 8-rd EUE tubing thread. This part
is 3.75-in. (95.2-mm) OD x 2.00-in. (50.8-mm) ID. 6.50-in.
(165.1-mm) overall length.
N/A (696.53124)—2 3/8-in. Hydril PH-6 tubing thread. This part is
3.68-in. (93.5-mm) OD x 1.80-in. (45.7-mm) ID. 7.00-in. (177.8-mm)
overall length.
2
Optional top adapters with RFC® seats:
N/A (696.53002)—2 3/8-in. 8-rd EUE tubing thread. This part is
1.78-in. (45.2-mm) ID x 3.68-in. (93.5-mm) OD. 10.00-in. (254.0-mm)
overall length.
100070060 (696.53014)—2 7/8-in. 8-rd EUE tubing thread. This part
has 1.78-in. (45.2-mm) ID and 2.28-in. (57.9-mm) ID seats, and a
3.87-in. (98.3-mm) OD. 13.00-in. (330.2-mm) overall length.
Optional lower body:
N/A (696.53111)—4 5/32-in. 8 UNS thread. This part is 4.87-in.
3
(123.7-mm) OD x 2.25-in. (57.2-mm) ID. 6.40-in. (162.6-mm)
makeup length. Use O-ring 100001936 (70.33936).
4 Optional fluorocarbon O-ring: N/A (600.33608)

Data for Steel Components of New Toolsa


Tensile strength (lb) 150,700
Burst (psi) 10,000
Collapse (psi) 14,200
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 27 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

3.87" OD
(98.3 mm) 2 7/8" OD - 8 round
EUE tubing thread

1 2
6.00"
(152.4 mm)

2 15/16" - 10 UNS thread


2.44" ID
(62.0 mm)

3
4.62" OD
(117.3 mm)

6.60"
(167.6 mm)
32.89" Travel
(835.4 mm)

12.87" 6
(326.9 mm)
J-slot
3

4 5/32" - 8 UNS thread

2 11/16" - 10 UNS thread

8 4

8.12"
(206.2 mm) 9

3.00" OD
(76.2 mm)
10

4 5/32" - 8 UNS thread

4.87" OD
(123.7 mm)

11 3

2.46" ID
(62.5 mm)

10

4 5/32" - 8 UNS thread


3.60"
(91.4 mm)
1

SAP No.: 100070145


(696.571) RTTS Circulating Valve Mandrel OD Areas
2
RTTS Circulating Valve Mandrel OD (in.) Mandrel OD Area (in )
Approx. shipping weight: 110 lb
7 to 7 5/8 in.
3.000 7.069

7
2 /8-in. 8-rd EUE tubing thread (top)

Section 2a–RTTS Circulating Valves Page 28 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100070145


(696.571)
RTTS Circulating Valve
7 to 7 5/8 in.
7
2 /8-in. 8-rd EUE tubing thread (top)

Parts List—100070145 (696.571)


Part No. Number
# Description
SAP (Legacy) Required
1 100012538 (696.57001) 1 Top adapter
2 100002003 (70.34029) 1 O-ring
3 100001966 (70.33979) 2 O-ring
4 100070139 (696.5707) 1 J-slot sleeve
5 100012543 (696.57105) 1 Lug mandrel
6 100001930 (70.33925) 2 O-ring
7 100009946 (696.57106) 1 Port mandrel
8 100004080 (697.96203) 3 O-ring
9 100070127 (696.57005) 1 Body
10 100001936 (70.33936) 2 O-ring
11 100070146 (696.57109) 1 Lower body

# Notes—100070145 (696.571)

1 Optional female handling sub: 100070136 (696.57039)


Optional top adapters:
N/A (603.28004)—2 3/8-in. 8-rd EUE tubing thread— 3.68-in. (93.5-
mm) OD x 2.00-in. (50.8-mm) ID—6.00-in. (152.4-mm) overall length.
N/A (696.57014)—3 1/2-in. 8-rd EUE tubing thread—4.50-in.
(114.3-mm) OD x 2.44-in. (62.0-mm) ID—7.50-in. (190.5-mm) overall
length.
100003928 (603.29109)—3 1/2-in. API IF tool-joint thread— 5.00-in.
2 (127.0-mm) OD x 2.44-in. (62.0-mm) ID—0.50-in. (26.7-mm) overall
length.
N/A (696.57002)—3 1/2-in. VAM tubing thread—4.05-in. (102.9-mm)
OD x 2.44-in. (62.0-mm) ID—7.00-in. (177.8-mm) overall length.
Optional top adapter with RFC® seats:
100070130 (696.57012)—2 7/8-in. 8-rd EUE tubing thread—1.78-in.
(45.2-mm) ID and 2.28-in. (57.9-mm) ID seats x 3.87-in. (98.3-mm)
OD—13.00-in. (330.2-mm) overall length.

The notes for 100070145 (696.571) are continued on the following page.

September 14, 2001 Page 29 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

SAP No.: 100070145


(696.571)
RTTS Circulating Valve
7 to 7 5/8 in.
7
2 /8-in. 8-rd EUE tubing thread (top)
The tables for 100070145 (696.571) are continued from the previous page.

Notes—100070145 (696.571)
Optional lower bodies to replace 100070146 (696.57109):
100070148 (696.57115)—3 1/2-in. API IF tool-joint thread— 4.87-in.
(123.7-mm) OD x 2.68-in. (68.1-mm) ID—5.38-in. (136.7-mm) makeup
length. Use O-ring 100001938 (70.33938).
100070150 (696.57124)—3 7/8-in. 6-stub Acme tool-joint thread—
4.87-in. (123.7-mm) OD x 2.44-in. (62.0-mm) ID— 5.65-in. (143.5-mm)
makeup length. Use 1 O-ring 100001938 (70.33938) and 2 backup
3
100064514 (600.00270).
N/A (696.57116)—4 1/2-in. API IF tool-joint thread—6.00-in. (152.4-
mm) OD x 2.68-in. (68.1-mm) ID—5.38-in. (136.7-mm) makeup length.
Use O-ring 100002017 (70.34047).
N/A (696.57111)—5 1/32-in. 8-UNS thread—6.00-in. (152.4-mm) OD x
2.50-in. (63.5-mm) ID—6.80-in. (172.7-mm) makeup length. Use O-
ring 100002016 (70.34045).
4 Optional fluorocarbon O-ring: 100064749 (600.33610)

Data for Steel Components of New Toolsa


Tensile strength (lb) 148,800
Burst (psi) 10,000
Collapse (psi) 10,200
a
This data is valid only for new tools, direct from the manufacturing facility.

Section 2a–RTTS Circulating Valves Page 30 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

1 1
3 1/2" API internal flush
tool joint thread

5.00" OD
(127.0 mm)

10.50"
(266.7 mm)

2
2.44" ID
(62.0 mm) 2 15/16" - 10 UNS thread

12.87"
(326.9 mm)

6.60"
(167.6 mm)
Travel
5

4.62" OD J-slot
(117.3 mm) 3

6
4 5/32" - 8 UNS thread
2 11/16" - 10 UNS thread

3.00" OD 7
(76.2 mm)
37.12"
(942.8 mm)

8 3

8.12"
(206.2 mm)

4 5/32" - 8 UNS thread

10 2
4.87" OD
(123.7 mm) 11

2.68" ID
(68.1 mm)

12

3.87"
(98.3 mm) 3 1/2" API internal flush
tool joint thread

SAP No.: N/A


(696.57175) RTTS Circulating Valve Mandrel OD Areas
RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
7 to 7 5/8 in. 3.000 7.069
1
3 /2-in. API IF Connections
(top and bottom)

September 14, 2001 Page 31 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

SAP No.: N/A


(696.57175)
RTTS Circulating Valve
7 to 7 5/8 in.
1
3 /2-in. API IF Connections (top and bottom)

Parts List—N/A (696.57175)


Part No. Number
# Description
SAP (Legacy) Required
1 100003928 (603.29109) 1 Coupling
2 100002003 (70.34029) 1 O-ring
3 100001966 (70.33979) 2 O-ring
4 100070139 (696.5707) 1 J-slot sleeve
5 100012543 (696.57105) 1 Lug mandrel
6 100001930 (70.33925) 3 O-ring
7 100070127 (696.57005) 1 Body
8 100004080 (697.96203) 3 O-ring
9 100001936 (70.33936) 1 O-ring
10 100070148 (696.57115) 1 Lower body
11 100009946 (696.57106) 1 Port mandrel
12 100001938 (70.33938) 1 O-ring

# Notes—N/A (696.57175)
Optional top adapters:
N/A (603.28004)—2 3/8-in. 8-rd EUE tubing thread—3.68-in.
(93.5-mm) OD x 2.00-in. (50.8-mm) ID—6.00-in. (152.4-mm) overall
length.
N/A (696.57014)—3 1/2-in. 8-rd EUE tubing thread. This part is 4.50-
in. (114.3-mm) OD x 2.44-in. (62.0-mm) ID. 7.50-in. (190.5-mm)
1 overall length.
N/A (696.57002)—3 1/2-in. VAM tubing thread. 4.05-in. (102.9-mm)
OD x 2.44-in. (62.0-mm) ID. 7.00-in. (177.8-mm) overall length.
Optional top adapter with RFC® seats:
100070130 (696.57012)—2 7/8-in. 8-rd EUE tubing thread. 1.78-in.
(45.2-mm) ID and 2.28-in. (57.9-mm) ID seats, and a 3.87-in.
(98.3-mm) OD. 13.00-in. (330.2-mm) overall length.

The notes and tables for N/A (696.57175) are continued on the following page.

Section 2a–RTTS Circulating Valves Page 32 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: N/A


(696.57175)
RTTS Circulating Valve
7 to 7 5/8 in.
1
3 /2-in. API IF Connections (top and bottom)
The notes and tables for N/A (696.57175) are continued from the previous page.

# Notes—N/A (696.57175)
Optional lower bodies:
100070150 (696.57124)—3 7/8-in. 6-stub Acme tool-joint thread—4.87-
in. (123.7-mm) OD x 2.44-in. (62.0-mm) ID—5.65-in. (143.5-mm)
makeup length. Use 1 O-ring 100001938 (70.33938) and 2 backup
100064514 (600.00270).
2 N/A (696.57116)—4 1/2-in. API IF tool-joint thread—6.00-in. (152.4-mm)
OD x 2.68-in. (68.1-mm) ID—5.38-in. (136.7-mm) makeup length. Use
O-ring 100002017 (70.34047).
N/A (696.57111)—5 1/32-in. 8-UNS thread—6.00-in. (152.4-mm) OD x
2.50-in. (63.5-mm) ID—6.80-in. (172.7-mm) makeup length. Use O-ring
100002016 (70.34045).
3 Optional fluorocarbon O-ring: 100064749 (600.33610)

Data for Steel Components of New Toolsa


Tensile strength (lb) 148,800
Burst (psi) 10,000
Collapse (psi) 10,200
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 33 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

4.62" OD 1 1
(117.3 mm)

3 7/8" - 6 stub Acme special


tool joint thread
9.00"
(228.6 mm)

2 15/16" - 10 UNS thread

3
2.44" ID
(62.0 mm)

6.60"
(167.6 mm)
Travel

12.87"
(326.9 mm)

4 5/32" - 8 UNS
thread
4.62" OD
(117.3 mm) J-slot
3

6
2 11/16" - 10 UNS thread

35.89"
(911.6 mm) 7

3.00" OD
(76.2 mm) 8 3

8.12"
(206.2 mm)

4 5/32" - 8 UNS thread

10 2

11

4.87" OD
(123.7 mm)

4.50"
(114.3 mm)
3 7/8" - 6 stub Acme special tool
joint thread

SAP No.: 100070159


(696.57172)
RTTS Circulating Valve RTTS Circulating Valve Mandrel OD Areas
2
7 to 7 5/8 in. Mandrel OD (in.) Mandrel OD Area (in )
7 3.000 7.069
3 /8-in. 6-Stub Acme Special Tool-Joint
Connections

Section 2a–RTTS Circulating Valves Page 34 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100070159


(696.57172)
RTTS Circulating Valve
7 to 7 5/8 in.
7
3 /8-in. 6-Stub Acme Special Tool-Joint Connections

Parts List—100070159 (696.57172)


Part No. Number
# Description
SAP (Legacy) Required
1 100070156 (696.57159) 1 Coupling
2 100002003 (70.34029) 1 O-ring
3 100001966 (70.33979) 2 O-ring
4 100070139 (696.5707) 1 J-slot sleeve
5 100012543 (696.57105) 1 Lug mandrel
6 100001930 (70.33925) 1 O-ring
7 100070127 (696.57005) 1 Body
8 100004080 (697.96203) 3 O-ring
9 100001938 (70.33938) 2 O-ring
10 100070150 (696.57124) 1 Lower body
11 100009946 (696.57106) 1 Port mandrel

# Notes—100070159 (696.57172)

Optional top adapters:


N/A (603.28004)—2 3/8-in. 8-rd EUE tubing thread—3.68-in. (93.5-mm) OD
x 2.00-in. (50.8-mm) ID—6.00-in. (152.4-mm) overall length.
N/A (696.57014)—3 1/2-in. 8-rd EUE tubing thread—4.50-in. (114.3-mm)
OD x 2.44-in. (62.0-mm) ID—7.50-in. (190.5-mm) overall length.
100003928 (603.29109)—3 1/2-in. API IF tool-joint thread—5.00-in.
(127.0-mm) OD x 2.44-in. (62.0-mm) ID—10.50-in. (26.7-mm) overall
1
length.
N/A (696.57002)—3 1/2-in. VAM tubing thread—4.05-in. (102.9-mm) OD x
2.44-in. (62.0-mm) ID—7.00-in. (177.8-mm) overall length.
Optional top adapter with RFC® seats:
100070130 (696.57012)—2 7/8-in. 8-rd EUE tubing thread—1.78-in.
(45.2-mm) ID and 2.28-in. (57.9-mm) ID seats x 3.87-in. (98.3-mm) OD—
13.00-in. (330.2-mm) overall length.
The notes and tables for 100070159 (696.57172) are continued from the previous page.

September 14, 2001 Page 35 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

SAP No.: 100070159


(696.57172)
RTTS Circulating Valve
7 to 7 5/8 in.
7
3 /8-in. 6-Stub Acme Special Tool-Joint Connections

The notes and tables for 100070159 (696.57172) are continued from the previous page.

# Notes—100070159 (696.57172)
Optional lower bodies:
100070148 (696.57115)—3 1/2-in. API IF tool-joint thread—4.87-in.
(123.7-mm) OD x 2.68-in. (68.1-mm) ID—5.38-in. (136.7-mm)
makeup length. Use O-ring 100001938 (70.33938).
N/A (696.57116)—4 1/2-in. API IF tool-joint thread—6.00-in. (152.4-
2
mm) OD x 2.68-in. (68.1-mm) ID—5.38-in. (136.7-mm) makeup
length. Use O-ring 100002017 (70.34047).
N/A (696.57111)—5 1/32-in. 8-UNS thread—6.00-in. (152.4-mm) OD x
2.50-in. (63.5-mm) ID—6.80-in. (172.7-mm) makeup length. Use O-
ring 100002016 (70.34045).
3 Optional fluorocarbon O-ring: 100064749 (600.33610)

Data for Steel Components of New Toolsa


Tensile strength (lb) 148,800
Burst (psi) 10,000
Collapse (psi) 10,200
a
This data is valid only for new tools, direct from the manufacturing
facility.

Section 2a–RTTS Circulating Valves Page 36 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

3.87" OD
(98.3 mm) 2 7/8" OD - 8 round
EUE tubing thread

1 2
6.00“
(152.4 mm)

2 15/16" - 10 UNS thread


2.44" ID
(62.0 mm)

3
4.62" OD
(117.3 mm)

12.60"
(320.0 mm)
44.89" Travel
(1140.2 mm)

J-slot

18.87" 6
(479.3 mm)
3

4 5/32" - 8 UNS thread

2 11/16" - 10 UNS thread

8 3

8.12"
(206.2 mm) 9

3.00" OD
(76.2 mm)
10

4 5/32" - 8 UNS thread

4.87" OD
(123.7 mm)

11

2.46" ID
(62.5 mm)

10

4 5/32" - 8 UNS thread


3.60"
(91.4 mm)
1

SAP No.: N/A


(696.5718) RTTS Circulating Valve Mandrel OD Areas
RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
7 to 7 5/8 in. 3.000 7.069

Long Stroke, 2 7/8-in. 8-rd tubing thread


(top)
September 14, 2001 Page 37 of 52 Section 2a–RTTS Circulating Valves
Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

SAP No.: N/A


(696.5718)
RTTS Circulating Valve
7 to 7 5/8 in.
7
Long Stroke, 2 /8-in. 8-rd tubing thread (top)

Parts List—N/A (696.5718)


Part No. Number
# Description
SAP (Legacy) Required
1 100012538 (696.57001) 1 Top adapter
2 100002003 (70.34029) 1 O-ring
3 100001966 (70.33979) 2 O-ring
4 100012544 (696.5717) 1 J-slot sleeve
5 100070161 (696.57185) 1 Lug mandrel
6 100001930 (70.33925) 2 O-ring
7 100012545 (696.57186) 1 Port mandrel
8 100004080 (697.96203) 3 O-ring
9 100070127 (696.57005) 1 Body
10 100001936 (70.33936) 2 O-ring
11 100070147 (696.57113) 1 Lower body

# Notes—N/A (696.5718)

1 Optional female handling sub: 100070136 (696.57039)


Optional top adapters:
N/A (603.28004)—2 3/8-in. 8-rd EUE tubing thread—
3.68-in. (93.5-mm) OD x 2.00-in. (50.8-mm) ID—6.00-in. (152.4-mm)
overall length.
N/A (696.57014)—3 1/2-in. 8-rd EUE tubing thread—
4.50-in. (114.3-mm) OD x 2.44-in. (62.0-mm) ID—7.50-in. (190.5-
mm) overall length.
100003928 (603.29109)—3 1/2-in. API IF tool-joint thread—
2 5.00-in. (127.0-mm) OD x 2.44-in. (62.0-mm) ID—10.50-in. (26.7-
mm) overall length.
N/A (696.57002)—3 1/2-in. VAM tubing thread—
4.05-in. (102.9-mm) OD x 2.44-in. (62.0-mm) ID—7.00-in. (177.8-
mm) overall length.
Optional top adapters with RFC® seats:
100070130 (696.57012)—2 7/8-in. 8-rd EUE tubing thread—1.78-in.
(45.2-mm) ID and 2.28-in. (57.9-mm) ID seats x 3.87-in. (98.3-mm)
OD—13.00-in. (330.2-mm) overall length.
3 Optional fluorocarbon O-ring: 100064749 (600.33610)

Data for Steel Components of New Toolsa


Tensile strength (lb) 148,800
Burst (psi) 10,000
Collapse (psi) 10,200
aThis data is valid only for new tools, direct from the manufacturing facility.

Section 2a–RTTS Circulating Valves Page 38 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

4.62" OD 1
(117.3 mm) 2

9.00"
(225.0 mm)
3 7/8" - 6 stub Acme special
tool joint thread

2
2 15/16" - 10 UNS thread
2.44" ID
(62.0 mm)

4.62" OD 4
(117.3 mm)

12.60"
(320.0 mm)
47.64" Travel
(1210.1 mm)

18.87"
(479.3 mm)
6

2.37" ID 3 J-slot
(60.2 mm)
4 5/32" - 8 UNS thread
2 11/16" - 10 UNS thread

8 3

9
8.12"
(206.2 mm)
10
3.00" OD
(76.2 mm) 4 5/32" - 8 UNS thread

4.87" OD
(123.7 mm)
11

2.46" ID
(62.5 mm)
10

1
3.60"
(91.4 mm) 4 5/32" - 8 UNS - 2 thread

SAP No.: 100070157


(696.5716) RTTS Circulating Valve Mandrel OD Areas
RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
7 to 7 5/8 in. 3.000 7.069
7
Long Stroke, 3 /8-in. 6-Stub Acme Special
Tool-Joint Connections
September 14, 2001 Page 39 of 52 Section 2a–RTTS Circulating Valves
Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

SAP No.: 100070157


(696.5716)
RTTS Circulating Valve
7 to 7 5/8 in.
7
Long Stroke, 3 /8-in. 6-Stub Acme Special Tool-Joint Connections

Parts List—100070157 (696.5716)


Part No. Number
# Description
SAP (Legacy) Required
1 100070156 (696.57159) 1 Top adapter
2 100002003 (70.34029) 1 O-ring
3 100001966 (70.33979) 2 O-ring
4 100070161 (696.57185) 1 Lug mandrel
5 100012544 (696.5717) 1 J-slot sleeve
6 100001930 (70.33925) 2 O-ring
7 100012545 (696.57186) 1 Port mandrel
8 100004080 (697.96203) 3 O-ring
9 100070127 (696.57005) 1 Body
10 100001936 (70.33936) 2 O-ring
11 100070147 (696.57113) 1 Lower body

# Notes—100070157 (696.5716)

1 Optional female handling sub: 100070136 (696.57039)


Optional top adapters:
N/A (603.28004)—2 3/8-in. 8-rd EUE tubing thread—3.68-in. (93.5-mm)
OD x 2.00-in. (50.8-mm) ID—6.00-in. (152.4-mm) overall length.
N/A (696.57014)—3 1/2-in. 8-rd EUE tubing thread—4.50-in. (114.3-mm)
OD x 2.44-in. (62.0-mm) ID—7.50-in. (190.5-mm) overall length.
100003928 (603.29109)—3 1/2-in. API IF tool-joint thread—5.00-in.
(127.0-mm) OD x 2.44-in. (62.0-mm) ID—10.50-in. (26.7-mm) overall
2
length.
N/A (696.57002)—3 1/2-in. VAM tubing thread—4.05-in. (102.9-mm) OD
x 2.44-in. (62.0-mm) ID—7.00-in. (177.8-mm) overall length.
Optional top adapters with RFC® seats:
100070130 (696.57012)—2 7/8-in. 8-rd EUE tubing thread—1.78-in.
(45.2-mm) ID and 2.28-in. (57.9-mm) ID seats x 3.87-in. (98.3-mm) OD—
13.00-in. (330.2-mm) overall length.
3 Optional fluorocarbon O-ring: 100064749 (600.33610)

Data for Steel Components of New Toolsa


Tensile strength (lb) 148,800
Burst (psi) 10,000
Collapse (psi) 12,400
a
This data is valid only for new tools, direct from the manufacturing facility.

Section 2a–RTTS Circulating Valves Page 40 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

2 7/8" - 8 round EUE


3.87" OD tubing thread
(98.3 mm)
1 2
6.00"
(152.4 mm)

2 15/16" - 10 UNS thread

4.62" OD 4
(117.3 mm)

6.60"
(167.6 mm)
Travel 5
2.44" ID
(62.0 mm)

12.87"
(326.9 mm)

2.375" ID
(60.3 mm) 6

3 J-slot

32.89"
4 5/32" - 8 UNS thread
(835.4 mm)
2 11/16" - 10 UNS thread

9 4
8.12"
(206.2 mm)

10

4 5/32" - 8 UNS - 3 thread

4.87" OD
(123.7 mm)
11 3

5.90"
(149.9 mm)

10

1
3.60" 2.46" ID
(91.4 mm) (62.5 mm) 4 5/32" - 8 UNS thread

SAP No.: N/A


(696.5713) RTTS Circulating Valve Mandrel OD Areas
RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
7 to 7 5/8 in. 3.000 7.069
7
Auto J-Slot, 2 /8-in. 8-rd tubing thread (top)

September 14, 2001 Page 41 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

SAP No.: N/A


(696.5713)
RTTS Circulating Valve
7 to 7 5/8 in.
7
Auto J-Slot, 2 /8-in. 8-rd tubing thread (top)

Parts List—N/A (696.5713)


Part No. Number
# Description
SAP (Legacy) Required
1 100012538 (696.57001) 1 Top adapter
2 100002003 (70.34029) 1 O-ring
3 100001966 (70.33979) 2 O-ring
4 100070152 (696.57131) 1 Lug mandrel
5 100070153 (696.57132) 1 Automatic J-slot sleeve
6 100001930 (70.33925) 2 O-ring
7 100009946 (696.57106) 1 Port mandrel
8 100070127 (696.57005) 1 Body
9 100004080 (697.96203) 3 O-ring
10 100001936 (70.33936) 2 O-ring
11 100070146 (696.57109) 1 Lower body

# Notes—N/A (696.5713)

1 Optional female handling sub: 100070136 (696.57039)


Optional top adapters:
N/A (603.28004)—2 3/8-in. 8-rd EUE tubing thread—3.68-in. (93.5-
mm) OD x 2.00-in. (50.8-mm) ID—6.00-in. (152.4-mm) overall length.
N/A (696.57014)—3 1/2-in. 8-rd EUE tubing thread—4.50-in. (114.3-
mm) OD x 2.44-in. (62.0-mm) ID—7.50-in. (190.5-mm) overall length.
100003928 (603.29109)—3 1/2-in. API IF tool-joint thread—5.00-in.
(127.0-mm) OD x 2.44-in. (62.0-mm) ID—10.50-in. (26.7-mm) overall
2
length.
N/A (696.57002)—3 1/2-in. VAM tubing thread—4.05-in. (102.9-mm)
OD x 2.44-in. (62.0-mm) ID—7.00-in. (177.8-mm) overall length.
Optional top adapters with RFC® seats:
100070130 (696.57012)—2 7/8-in. 8-rd EUE tubing thread—1.78-in.
(45.2-mm) ID and 2.28-in. (57.9-mm) ID seats x 3.87-in. (98.3-mm)
OD—13.00-in. (330.2-mm) overall length.

Notes and tables for N/A (696.5713) are continued on the following page.

Section 2a–RTTS Circulating Valves Page 42 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: N/A


(696.5713)
RTTS Circulating Valve
7 to 7 5/8 in.
7
Auto J-Slot, 2 /8-in. 8-rd tubing thread (top)

The notes and tables for N/A (696.5713) are continued from the previous page.

# Notes—N/A (696.5713)
Optional lower bodies to replace 100070146 (696.57109):
100070148 (696.57115)—3 1/2-in. API IF tool-joint thread—4.87-in.
(123.7-mm) OD x 2.68-in. (68.1-mm) ID—5.38-in. (136.7-mm) makeup
length. Use O-ring 100001938 (70.33938).
100070150 (696.57124)—3 7/8-in. 6-stub Acme tool-joint thread—
4.87-in. (123.7-mm) OD x 2.44-in. (62.0-mm) ID—5.65-in. (143.5-mm)
makeup length. Use 1 O-ring 100001938 (70.33938) and 2 backup
3
100064514 (600.00270).
N/A (696.57116)—4 1/2-in. API IF tool-joint thread—6.00-in. (152.4-
mm) OD x 2.68-in. (68.1-mm) ID—5.38-in. (136.7-mm) makeup length.
Use O-ring 100002017 (70.34047).
N/A (696.57111)—5 1/32-in. 8-UNS thread—6.00-in. (152.4-mm) OD x
2.50-in. (63.5-mm) ID—6.80-in. (172.7-mm) makeup length. Use O-
ring 100002016 (70.34045).
4 Optional fluorocarbon O-ring: 100064749 (600.33610)

Data for Steel Components of New Toolsa


Tensile strength (lb) 148,800
Burst (psi) 10,000
Collapse (psi) 10,100
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 43 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

6.25" OD
(158.7 mm)
4 1/2" - API internal flush tool
joint thread
11.00"
(279.4 mm)
1 2

3 13/16" - 10 UNS thread

4
5.75" OD
(146.1 mm)

5
6.60"
(167.6 mm)
Travel

44.37"
(1127.0 mm)

12.87"
(326.9 mm) 3.00" ID
(76.2 mm) 3 5/8" - 10 UNS
thread
J-slot
3

5 1/32" - 8 UNS thread

8 5

3.87" OD
9
(98.3 mm)
8.37"
(212.6 mm)
10

4 29/32" - 8 UNS thread

6.25" OD
(158.7 mm)

11 3

12.13"
(308.1 mm)

12

4.37"
(111.0 mm) 4 1/2" API internal flush tool
joint thread

SAP No.: 100070278


(696.601) RTTS Circulating Valve Mandrel OD Areas
RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
8 5/8 to 20 in. 3.870 11.763
1
4 /2-in. IF thread (top and bottom)

Section 2a–RTTS Circulating Valves Page 44 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100070278


(696.601)
RTTS Circulating Valve
8 5/8 to 20 in.
1
4 /2-in. IF thread (top and bottom)

Parts List—100070278 (696.601)


Part No. Number
# Description
SAP (Legacy) Required
1 100064924 (602.05215) 1 Coupling
2 100001970 (70.33983) 1 O-ring
3 100001936 (70.33936) 2 O-ring
4 100012562 (696.60105) 1 Lug mandrel
5 100070276 (696.6007) 1 J-slot sleeve
6 100002007 (70.34033) 1 O-ring
7 100004052 (696.60106) 1 Port mandrel
8 100004051 (696.60002) 3 O-ring
9 100070267 (696.60005) 1 Body
10 100001990 (70.34012) 1 O-ring
11 100070279 (696.60107) 1 Lower body
12 100002017 (70.34047) 1 O-ring

# Notes—100070278 (696.601)

1 Optional pickup bail: 100067105 (640.52856)


Optional top adapters:
N/A (602.05219)—3 1/2-in. API IF tool-joint thread— 4.75-in. (120.7-mm)
OD x 2.68-in. (68.1-mm) ID—11.00-in. (279.4-mm) overall length.
2 N/A (602.05222)—4 1/2-in. extra-hole tool-joint thread—6.00-in. (152.4-
mm) OD x 3.00-in. (76.2-mm) ID—11.00-in. (279.4-mm) overall length.
N/A (602.05213)—5 1/2-in. API full-hole tool-joint thread—7.00-in. (177.8-
mm) OD x 3.00-in. (76.2-mm) ID—11.00-in. (279.4-mm) overall length.
Optional lower body to replace 100070279 (696.60107):
N/A (696.60111)—3 7/8-in. 6-stub Acme special tool-joint thread—6.12-in.
(155.5-mm) OD x 3.00-in. (76.2-mm) ID—6.00-in. (152.4-mm) makeup
length. Use 1 O-ring 100001938 (70.33938), and 2 100064514
3
(600.00270).
N/A (696.60109)—5 1/32-in. 8-UNS thread—6.00-in.(152.4-mm) OD x
2.50-in. (63.5-mm) ID. 6.80-in. (172.7-mm) makeup length. Use O-ring
100002016 (70.34045).
Optional one-piece mandrel with 3.25-in. ID:
4 N/A (696.60104) (replaces lug mandrel 100012562 (696.60105) and port
mandrel 100004052 (696.60106) on standard circulating valve only).
5 Optional fluorocarbon O-ring: N/A (600.33607)

Data for Steel Components of New Toolsa


Tensile strength (lb) 311,400
Burst (psi) 10,500
Collapse (psi) 12,400
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 45 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

6.25" OD
(158.7 mm)
4 1/2" API internal flush tool
joint thread
11.00“
(279.40 mm)
1 2

3 13/16" - 10 UNS thread

4
5.75" OD
(146.1 mm)

5
12.60"
(320.0 mm)
Travel

56.37"
(1431.8 mm)

18.87" J-slot
(479.3 mm) 3.00" ID
(76.2 mm) 3 5/8" - 10 UNS
thread

5 1/32" - 8 UNS thread

8 3

3.87" OD
9
(98.3 mm)
8.37"
(212.6 mm)
10

4 29/32" - 8 UNS thread

6.25" OD
(158.7 mm)

11

18.13"
(460.5 mm)

12

4.37"
(111.0 mm) 4 1/2" API internal flush tool
joint thread

SAP No.: 100070285


(696.6018) RTTS Circulating Valve Mandrel OD Areas
RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
8 5/8 to 20 in. 3.870 11.763
1
Long Stroke, 4 /2-in. IF thread (top and bottom)

Section 2a–RTTS Circulating Valves Page 46 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100070285


(696.6018)
RTTS Circulating Valve
8 5/8 to 20 in.
Long Stroke, 4 1/2-in. IF thread (top and bottom)

Parts List—100070285 (696.6018)


Part No. Number
# Description
SAP (Legacy) Required
1 100064924 (602.05215) 1 Coupling
2 100001970 (70.33983) 1 O-ring
3 100001936 (70.33936) 2 O-ring
4 100070288 (696.60185) 1 Lug mandrel
5 100070286 (696.60183) 1 J-slot sleeve
6 100002007 (70.34033) 1 O-ring
7 100012563 (696.60186) 1 Port mandrel
8 100004051 (696.60002) 3 O-ring
9 100070267 (696.60005) 1 Body
10 100001990 (70.34012) 1 O-ring
11 100070289 (696.60187) 1 Lower body
12 100002017 (70.34047) 1 O-ring

# Notes—100070285 (696.6018)

1 Optional pickup bail: 100067105 (640.52856)


Optional top adapters:
N/A (602.05219)—3 1/2-in. API IF tool-joint thread— 4.75-in.
(120.7-mm) OD x 2.68-in. (68.1-mm) ID—11.00-in. (279.4-mm)
overall length.

2 N/A (602.05222)—4 1/2-in. extra-hole tool-joint thread— 6.00-in.


(152.4-mm) OD x 3.00-in. (76.2-mm) ID—11.00-in. (279.4-mm)
overall length.
N/A (602.05213)—5 1/2-in. API full-hole tool-joint thread—7.00-in.
(177.8-mm) OD x 3.00-in. (76.2-mm) ID—11.00-in. (279.4-mm)
overall length.
3 Optional fluorocarbon O-ring: N/A (600.33607)

Data for Steel Components of New Toolsa


Tensile strength (lb) 311,400
Burst (psi) 10,500
Collapse (psi) 12,300
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 47 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

3 7/8" - 6 stub Acme


special tool joint thread
11.00" 5.75" OD
(280.3 mm) (147.0 mm)

1 1

3 13/16" - 10 UNS thread

4
18.87"
(479.3 mm)
12.60"
(320.0 mm) 5
Travel
5.75" OD
(147.0 mm)

56.37"
(1431.8 mm) 3.00" ID
(76.2 mm)

J-slot

3 5/8" - 10 UNS thread


3

5 1/32" - 8 UNS thread

8
8.37"
(212.6 mm)

9 2
5.75" OD
(147.0 mm)
10

4 29/32" - 8 UNS thread

6.12" OD
(155.4 mm)

11

18.13"
(406.5 mm)

3.75" ID
(95.3 mm)

12

4.37"
(111.0 mm)
4 1/2" API internal flush tool
joint thread

SAP No.: N/A


(696.6017)
RTTS Circulating Valve RTTS Circulating Valve Mandrel OD Areas
2
8 5/8 to 20 in. Mandrel OD (in.) Mandrel OD Area (in )
3.870 11.763
Long Stroke, 3 7/8-in. 6-Stub Acme Special
Tool-Joint Connections

Section 2a–RTTS Circulating Valves Page 48 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: N/A


(696.6017)
RTTS Circulating Valve
8 5/8 to 20 in.
7
Long Stroke, 3 /8-in. 6-Stub Acme Special Tool-Joint Connections

Parts List—N/A (696.6017)


Part No. Number
# Description
SAP (Legacy) Required
1 100070281 (696.60171) 1 Coupling
2 100001970 (70.33983) 1 O-ring
3 100001936 (70.33936) 2 O-ring
4 100070288 (696.60185) 1 Lug mandrel
5 100070286 (696.60183) 1 J-slot sleeve
6 100002007 (70.34033) 1 O-ring
7 100012563 (696.60186) 1 Port mandrel
8 100070267 (696.60005) 1 Body
9 100004051 (696.60002) 3 O-ring
10 100001990 (70.34012) 1 O-ring
11 100070289 (696.60187) 1 Lower body
12 100002017 (70.34047) 1 O-ring

# Notes—N/A (696.6017)

Optional top adapters:


N/A (602.05219)—3 1/2-in. API IF tool-joint thread—4.75-in. (120.7-mm)
OD x 2.68-in. (68.1-mm) ID. 11.00-in. (279.4-mm) overall length.
N/A (602.05222)—4 1/2-in. extra-hole tool-joint thread—6.00-in.
1 (152.4-mm) OD x 3.00-in. (76.2-mm) ID—11.00-in. (279.4-mm) overall
length.
N/A (602.05213)—5 1/2-in. API full-hole tool-joint thread— 7.00-in.
(177.8-mm) OD x 3.00-in. (76.2-mm) ID—11.00-in. (279.4-mm) overall
length.
2 Optional fluorocarbon O-ring: N/A (600.33607)

Data for Steel Components of New Toolsa


Tensile strength (lb) 311,400
Burst (psi) 11,200
Collapse (psi) 12,300
a
This data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 49 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

6.25" OD
(158.7 mm)
4 1/2" API internal flush tool
joint thread
11.00“
(279.4 mm)
1 2

3 13/16" - 10 UNS thread

4
5.75" OD
(146.1 mm)

5
12.60"
(320.0 mm)
Travel

56.37"
(1431.8 mm)

18.87" J-slot
(479.3 mm) 3.00" ID
(76.2 mm) 3 5/8" - 10 UNS
thread

5 1/32" - 8 UNS thread

8 3

3.87" OD
9
(98.3 mm)
8.37" OD
(212.6 mm)
10

4 29/32" - 8 UNS thread

6.12" OD
(155.4 mm)

11

18.13"
(460.5 mm)

12

4.37"
(111.0 mm) 4 1/2" API internal flush tool
joint thread

SAP No.: 100070280


(696.6016) RTTS Circulating Valve Mandrel OD Areas
RTTS Circulating Valve Mandrel OD (in.) 2
Mandrel OD Area (in )
8 5/8 to 20 in. 3.870 11.763

Long Stroke, Big Ports, 4 1/2-in. IF thread


(top and bottom)
Section 2a–RTTS Circulating Valves Page 50 of 52 September 14, 2001
Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are listed
in parentheses. N/A in place of the SAP number denotes that a
Service Tools Manual
SAP number has not yet been assigned for that part.

SAP No.: 100070280


(696.6016)
RTTS Circulating Valve
8 5/8 to 20 in.
Long Stroke, Big Ports, 4 1/2-in. IF thread (top and bottom)

Parts List—100070280 (696.6016)


Part No. Number
# Description
SAP (Legacy) Required
1 100064924 (602.05215) 1 Coupling
2 100001970 (70.33983) 1 O-ring
3 100001936 (70.33936) 2 O-ring
4 100070288 (696.60185) 1 Lug mandrel
5 100070286 (696.60183) 1 J-slot sleeve
6 100002007 (70.34033) 1 O-ring
7 100070283 (696.60173) 1 Port mandrel
8 100004051 (696.60002) 3 O-ring
9 100070282 (696.60172) 1 Body
10 100001990 (70.34012) 1 O-ring
11 100070289 (696.60187) 1 Lower body
12 100002017 (70.34047) 1 O-ring

# Notes—100070280 (696.6016)

1 Optional pickup bail: 100067105 (640.52856)


Optional top adapters:
N/A (602.05219)—3 1/2-in. API IF tool-joint thread—4.75-in.
(120.7-mm) OD x 2.68-in. (68.1-mm) ID. 11.00-in. (279.4-mm) overall
length.
N/A (602.05222)—4 1/2-in. extra-hole tool-joint thread— 6.00-in.
2
(152.4-mm) OD x 3.00-in. (76.2-mm) ID. 11.00-in. (279.4-mm) overall
length.
N/A (602.05213)—5 1/2-in. API full-hole tool-joint thread— 7.00-in.
(177.8-mm) OD x 3.00-in. (76.2-mm) ID. 11.00-in. (279.4-mm) overall
length.
3 Optional fluorocarbon O-ring: N/A (600.33607)

Data for Steel Components of New Toolsa


Tensile strength (lb) 311,400
Burst (psi) 10,500
Collapse (psi) 12,300
aThis data is valid only for new tools, direct from the manufacturing facility.

September 14, 2001 Page 51 of 52 Section 2a–RTTS Circulating Valves


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.
Note: Where available, SAP numbers are listed first for the parts
and tools in this section. Former (legacy) part numbers are
listed in parentheses. N/A in place of the SAP number denotes
Service Tools Manual
that a SAP number has not yet been assigned for that part.

This page was intentionally left blank.

Section 2a–RTTS Circulating Valves Page 52 of 52 September 14, 2001


Copyright 1983, 1999, 2001
Halliburton Energy Services®, Inc.
All rights reserved.

You might also like