Pin ECU Captiva 2008 2

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Connector Part Information

 OEM: BOSCH 1928403462


 Service: N/A
 Description: 40-Way F ECU 40P Assembly Seal

Engine Control Module (ECM) X2 (LD9)


Pin Wire Circuit Function
82 — — Not Used
83 L-GN/BK — Fuel Injector Control (2)
84 BN/WH — Heated O2 Sensor Low Signal Bank 1 Sensor (1)
85 BK — Ground
86 OG/BK — Intake Air Temperature Sensor Low Reference
87 BN — Sensor Low Reference
88 BK/WH — Camshaft Position Sensor Low Reference
89 BN — Sensor Low Reference
90 — — Not Used
91 L-BU — Fuel Injector Control (4)
92 L-BU — Heated O2 Sensor Control Sensor 2
Engine Control Module (ECM) X2 (LD9)
Pin Wire Circuit Function
93 GY — 5-Volt Reference
94 GY — 5-Volt Reference
95 D-BU/WH — Crankshaft POS Sensor Signal (3)
96 YE/BK — Crankshaft POS Sensor Low Reference (3)
97 D-BU — Knock Sensor Signal (1)
98 — — Not Used
99 BN/WH — Fuel Injector Control (3)
100 L-GN — Manifold Absolute Pressure Sensor Signal
101 D-GN/WH — Oil Temperature Sensor Signal
102 PU/WH — Heated O2 Sensor High Signal Bank 1 Sensor (2)
103 PU/WH — Heated O2 Sensor high Signal Bank 1 Sensor (1)
104 D-GN — High Idle Switch Control
105 BN — Oil Pressure Gage Signal
106 D-GN/WH — EVAP Canister Purge Solenoid Control
107 BN — Fuel Injector Control (1)
108 BN — Intake Air Temperature Sensor Signal
109 YE — Engine Coolant Temperature Sensor Signal
110 GY — Exhaust Gas Recirculation Vacuum Regulator Valve Signal
111 BN — Oil Level Switch Signal
112 D-BU — Throttle POS Sensor Signal (5)
113 BN/WH — Camshaft Position Sensor Signal
114 D-BU — Idle Speed Control Motor Control Retract
115 — — Not Used
116 L-BU — Ignition Coil 1 and 4 Control
117 D-GN — Heated O2 Sensor Control Sensor 1
118 GY — Exhaust Gas Recirculation Solenoid Control
119 L-BU — Idle Speed Control Motor Control Extend
120 — — Not Used
121 D-GN/WH — Ignition Coil 2 and 3 Control

You might also like