Ce 313 Hydraulic Engineering Winter 2013 Instructor: Arturo Leon Ta: Yunji Choi Quiz 2 - Chapter 8 Viscous Flow in Pipes (Part 2) Name
Ce 313 Hydraulic Engineering Winter 2013 Instructor: Arturo Leon Ta: Yunji Choi Quiz 2 - Chapter 8 Viscous Flow in Pipes (Part 2) Name
Ce 313 Hydraulic Engineering Winter 2013 Instructor: Arturo Leon Ta: Yunji Choi Quiz 2 - Chapter 8 Viscous Flow in Pipes (Part 2) Name
Winter 2013
1. Crude oil is flowing through a pipe of diameter 1.25 m diameter and relative roughness 0.002 at a Reynolds
Number of 2x104. Specific gravity of the oil is 0.84 and dynamic viscosity of the oil is 0.4 N-s/m2. The head
loss per 100 m (m) of this pipe is most nearly
a. 5.3
b. 7.1
c. 9.2
d. 11.6
e. 4.3
2. A 20-cm diameter pipeline with a relative roughness of 0.01 has a total length of 45 m. When water is
pumped through the pipe at a rate of 5 m3/min, the major head loss (m) is most nearly
a. 3
b. 10
c. 15
d. 20
e. 40
3. Four different entrance flow conditions are presented below. Which one of the five options correctly lists
the KL coefficient of the four entrance flow conditions from the largest to smallest?
a. (a)-(b)-(c)-(d)
b. (b)-(c)-(d)-(e)
c. (d)-(b)-(c)-(a)
d. (d)-(c)-(b)-(a)
Slightly rounded Well rounded e. (a)-(c)-(d)-(b)
4. Water flows at a rate of 15m3/s in a 1-m diameter pipeline and it is discharging to a large reservoir. Find the
exit head loss.
a. 3.9-m
b. 7.4-m
c. 18.6-m
d. 20.3-m
e. 23.2-m