Scribd Logo
Upload

Welcome to Scribd!

  • 381 views

    Make & Take: Rockler Series

    Uploaded by

    Ae Jey

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Make & Take: Rockler Series

    Uploaded by

    Ae Jey
    381 views3 pages

    Original Title

    step-stool-plan

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    381 views3 pages

    Make & Take: Rockler Series

    Uploaded by

    Ae Jey

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3
    At a glance
    Powered by AI
    The key takeaways are that the stool is built using pocket hole joints and requires a pocket hole jig, handheld jigsaw, driver bit and screws. No glue is needed for assembly.

    The steps are to mark the pieces, cut the shapes, bore the holes using the pocket hole jig, complete the drilling, attach the legs, and do the final assembly by screwing the top to the stretchers.

    The materials required are 3/4 inch thick wood boards for the top, legs and stretchers in the dimensions listed on page 3.

    GET FROM ROCKLER

    Rockler Stock # Item


    22708 Kreg R3 Pocket

    Make & Take


    Hole Jig
    52318 Pocket Hole Screws

    Series

    www.rockler.com
    800-279-4441

    OTHER MATERIALS
    • Sandpaper

    Step up to stool making with this


    practical project that’s fun to make.

    5-PIECE STEP STOOL © 2017 Rockler Companies Inc.


    1. MARK THE PIECES 2. CUT THE SHAPES 3. BEGIN BORING THE HOLES

    Use a compass and a combo square Use a handheld jigsaw to cut the Using a pocket-hole jig, bore the
    to mark the shapes you will cut onto shapes into the stool parts. Clamp holes at the ends of each stretcher.
    your stool components. The form of them in place while you cut to ensure These joints will join the legs to the
    these cutouts is up to the builder. accuracy and safety. stretchers.

    4. COMPLETE THE DRILLING 5. ATTACH THE LEGS 6. FINAL ASSEMBLY

    In the same way, bore the holes that With the long driver bit provided in Complete the assembly by screwing
    will attach the stretchers to the top the pocket-hole kit, drive screws the top to the stretcher. Then sand the
    of the stool. Again, clamp the pieces through the stretchers into the stool smooth and apply your finish of
    securely as you drill the components. legs of the stool. choice.

    2 © 2017 Rockler Companies Inc.


    The builder can vary the shape of the
    stool’s top and the cutouts in the legs
    of the stool. No glue is required for
    the assembly of the stool.
    1

    MATERIAL LIST
    T x W x L
    2
    1 Top (1) 3/4" x 91 ⁄ 4" x 15"
    2 Legs (2) 3/4" x 91 ⁄ 4" x 9"
    3 Stretchers (2) 3/4" x 3" x 11"

    3
    2

    15°
    61/4" 15°

    3
    8°

    2
    2

    23/4"

    3 13/4" 51/2" 13/4"


    15°

    © 2017 Rockler Companies Inc.

    You might also like