FACULTY OF MECHANICAL ENGINEERING

UNIVERSITI TEKNOLOGI MARA (UiTM)

LABORATORY REPORT
Program : Bachelor of Engineering (Hons) Mechanical (EM220)
Course : Manufacturing Processes Laboratory
Course Code : MEM564
Title of Topic : CAD/CAM & CNC MILLING
Class : EMD5M1B1
Date of Report : 9/11/2020
Submission

Lecturer/ Instructor : Mr. Mohamad Firhan Morni

No. Student Name Student ID Number
1. AHMAD AMIR AIMAN BIN ROSMAHADI 2019468132

General Guidelines:

LEVEL Weak Marginal Satisfactory Good Excellent

Scale 1 2 3 4 5

Criteria Scale Level Marks

Achieved Obtained
Qualifying requirements:

Cover - Acceptable? * Yes / No

Introduction 2
CLO1
Apparatus 2

CLO3 Safety and Experimental Procedure 4

Conclusions 3
CLO2
Recommendation 3

References 1
CLO5
Report delivery 1

Total Marks (80%)

 LABORATORY REPORT ASSESSMENT FORM

General Guidelines:
LEVEL Weak Marginal Satisfactory Good Excellent

Scale 1 2 3 4 5
CONTENTS OF THE LABORATORY REPORT & GRADING CRITERIA

Report Contents Content Description Weightage Scale Factor Score

(1-5)

1.0 Refer to title of topic. - - - -

Title
2.0 State the purpose that describes

Objective(s) the intention of the computer - - - -

simulations/demo videos to the
topic.

3.0 Provide an understanding of the

Introduction computer simulations/demo

(Theory and videos to relate with the body of 10 % 2
Background) knowledge of the topic which
includes necessary diagrams,
theory or equations.
[CLO1 - PO1]

4.0 List equipment, machine,

accessories, and components,

involved in the computer
simulations/demo videos with
Apparatus the necessary picture/diagram.
May include a brief description 10 % 2
of the instrumentation/set-up if
necessary, to connect with the
main body of knowledge of the
topic.
[CLO1 - PO1]
5.0 Describe safety, standard

Safety and operating procedures and

methods applied to relate with
Experimental appropriate techniques of the 20 % 4
Procedure topic using available modern
engineering set up/ machineries
and IT tools.
[CLO3 – PO5]

6.0 Conclusions Summarize the outcome of the 15% 3

computer simulations/demo
videos. Relate this to the
objectives.
[CLO2 – PO4]

7.0 Recognize a need for

Recommendation improvement/ modification in 15% 3

the system/process for further
investigation (At least 3).
[CLO2 – PO4]

8.0 List references to methods and

References related studies with appropriate 5% 1

style of report writing. (At least
10).
[CLO5 – PO10]

9.0 Able to comprehend and write

effective reports and design

documentation; and give and
Report delivery receive clear instructions 5% 1
(Formatting and writing skill,
Language, include Turnitin
report)
[CLO5 – PO10]

Please note:
Compulsory to
include/attach this lab
report assessment TOTAL MARKS 80%
form in your report
submission. NO
MARK be given if
failure to do so.
1.0 TITLE: CAD/CAM & CNC MILLING

2.0 OBJECTIVE

- Create CNC code using CAD/CAM Catia.

-Apply CNC program into CNC milling machine.

3.0 INTRODUCTION

Milling is a process of removing anything from a workpiece such as metal or wood. Its
consist of few main parts such as the milling machine itself, a cutter, fixture and workpiece.
For this report, the CNC simulation has been taught using CAD/CAM Catia. Its involved on
3D coding that will be apply to produce workpiece.

4.0 APPARATUS

Figure 1 : CAD/CAM Catia

Figure 2 : CNC Milling Machine

5.0 SAFETY AND EXPERIMENTAL PROCEDURE

1. We generate CNC Code using CAD/CAM Catia.

2. Next, the CNC Milling machine isolator were turned on.

3. The air supply were turned on with maximum pressure (6 bar).

4. The milling machine were turned on.

5. The origin position were set.

6. The CNC Code were apply into the CNC Milling Machine.

7. The material were put at the origin position.

8. Lastly, we start the machine.

Precaution that should be considered during running this experiment is we must ensure
that we are wearing safety equipment such as safety glasses. This is to avoid metal chips that
came from the workpiece get into our eyes. Next, we must ensure that the door of the milling
machine is closed tightly before operating the machine, this is to avoid any dangerous
incident that might occur during the operation such as getting stuck at the moving parts.
6.0 CONCLUSION

Oobjective of experiment had been achieved. We can create CNC Code using CAD/CAM
Catia and apply CNC program into CNC milling machine. We learn the function of NC code
such as G-codes and M-codes. We also learn how to make simulation using CAD/CAM Catia
and analyze the process into NC code. Lastly, we learn how to put NC code into the CNC
milling machine and operating the machine. These is NC coding :

%1000 N6711 X90.523 Y23.559

N1 G54 G64 G40 G90 G17 G94 G49 G80 N6712 X90.5 Y23.527 Z-.989
N2 M8 N6713 X90.484 Y23.491 Z-.979
N3 G53 N6714 X90.475 Y23.453 Z-.968
N4 T1 M6 N6715 X90.473 Y23.414 Z-.958
N5 G0 X5.075 Y22.244 S1000 M3 N6716 X90.48 Y23.375 Z-.947
N6 Z20. N6717 X90.493 Y23.338 Z-.937
N7 Z10.001 N6718 X90.514 Y23.305 Z-.926
N8 G1 Z.001 F300. N6719 X90.541 Y23.276 Z-.916
N9 X5.097 Y22.287 Z-.012 N6720 Z9.084
N10 X5.205 Y22.473 Z-.07 N6721 G0 Z20.
N11 X5.32 Y22.654 Z-.127 N6722 M5
N12 X5.449 Y22.836 Z-.187 N6723 M30
N13 X5.603 Y23.028 Z-.253 N6724 M2
N14 X5.78 Y23.228 Z-.324 N6725 M30
N15 X5.967 Y23.063 Z-.391

7.0 RECOMMENDATION

The machine tool can be overheating, the channels must be clean regularly to be free from
dirt, soil and material. This can be done by having a calendar of cleaning up metals shaving
and the liquids used in cutting. Next is the machine should have a proper system that can
eliminate any metals chip from the workpiece by itself. This can increase the effectivity of
the experiment in terms of times and workforce.
8.0 REFERENCE

1. Asia, H. (2020, August 18). 10 Common Problems with CNC Machine Tools (And How
to Fix Them). Retrieved November 07, 2020, from https://hwacheonasia.com/10-
common-problems-with-cnc-machine-tools-and-how-to-fix-them/
2. Velling, A. (2020). What is CNC Machining? Working Principles & Available
Methods. https://fractory.com/what-is-cnc-machining/
3. Ernesto Lo Valvo, Roberto Licari, & Alessio Adornetto. (2012). CNC Milling
Machine Simulation in Engineering Education. https://online-journals.org/index.php/i-
joe/article/view/2047/0
4. Armin Afkhamifar, Dario Antonelli, & Paolo Chiabert. (2016). Variational Analysis
for CNC Milling Process.
https://www.sciencedirect.com/science/article/pii/S2212827116004480
5. II Thomas. (n.d.).Understanding CNC Machining (Overview of CNC Machining).
https://www.thomasnet.com/articles/custom-manufacturing-
fabricating/understanding-cnc-machining/
6. Anand Gupta, PK Soni, & CM Krishna. (2017). Modelling and Analysis of CNC
Milling Process Parameters on AI3030 based Composite.
https://iopscience.iop.org/article/10.1088/1757-899X/346/1/012073
7. Ernesto Lo Valvo, Roberto Licari, & Alessio Adornetto. (2012). CNC Milling
Machine Simulation in Engineering Education. https://online-journals.org/index.php/i-
joe/article/view/2047/0
8. Posted by Astro Machine Works on May 22, A. (2020). What is CNC Machining?: A
Comprehensive Guide. https://astromachineworks.com/what-is-cnc-machining/
9. Huicheng Yi, Yuansheng Zhou, Jinyuan Tang & Zezhong C.Chen. (2019).
Simulations and Error Analysis of the CNC milling of a face gear tooth with given
tool paths. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6598831/
10. Martin, H. (n.d.). 4 Essential Workplace Safety Tips for CNC Machinists.
https://www.mscdirect.com/betterMRO/4-essential-workplace-safety-tips-cnc-
machinists
 EMD5M1B1
ORIGINALITY REPORT

35 % 2% 0% 35%
SIMILARITY INDEX INTERNET SOURCES PUBLICATIONS
STUDENT PAPERS
PRIMARY SOURCES

Submitted to Universiti Teknologi MARA

1
35%
Student Paper
Exclude quotes On Exclude matches < 1%

Exclude bibliography On