Scribd
Upload
59 views11 pages

Quickcmc1: Test Module

This document summarizes the results of a test module that analyzed different fault scenarios on a power system. The test module conducted simulations of phase pickup faults on lines R, Y and B. It also simulated various levels of overcurrent faults including 2 times, 5 times and 10 times the nominal current at time multiples of 1, 0.5 and 1 seconds. The document details the voltage and current inputs for each fault scenario along with the observed trip, start and overload signals from the protection relay.

Uploaded by

tajudeen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
59 views11 pages

Quickcmc1: Test Module

This document summarizes the results of a test module that analyzed different fault scenarios on a power system. The test module conducted simulations of phase pickup faults on lines R, Y and B. It also simulated various levels of overcurrent faults including 2 times, 5 times and 10 times the nominal current at time multiples of 1, 0.5 and 1 seconds. The document details the voltage and current inputs for each fault scenario along with the observed trip, start and overload signals from the protection relay.

Uploaded by

tajudeen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 11

QuickCMC1

. .
Test Module
Name: OMICRON QuickCMC Version: 3.01
Test Start: 12-Apr-2016 09:55:28 Test End: 12-Apr-2016 10:19:02
User Name: Manager:
Company:

Test Results
Title: R PHASE PICK UP
.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 1.018 A 0.00 ° 50.000 Hz
I L2 0.000 A 0.00 ° 50.000 Hz
I L3 0.000 A 0.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L1
180° 0°

242.5 V -90° 1.5 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 1.018A 0.00°
I L2 0.000A 0.00°
I L3 0.000A 0.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
0.135s n/a n/a

Title: Y PHASE PICK UP


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 0.000 A 0.00 ° 50.000 Hz
I L2 1.015 A 0.00 ° 50.000 Hz
I L3 0.000 A 0.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L2
180° 0°

242.5 V -90° 1.5 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 0.000A 0.00°
I L2 1.015A 0.00°
I L3 0.000A 0.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
0.499s n/a n/a

Title: B PHASE PICK UP


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 0.000 A 0.00 ° 50.000 Hz
I L2 0.000 A 0.00 ° 50.000 Hz
I L3 1.016 A 0.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L3
180° 0°

242.5 V -90° 1.5 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 0.000A 0.00°
I L2 0.000A 0.00°
I L3 1.016A 0.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
0.111s n/a n/a

Title: OC NI3.0, 2 TIMES@TMS=1.0


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 2.000 A 0.00 ° 50.000 Hz
I L2 2.000 A 0.00 ° 50.000 Hz
I L3 2.000 A 0.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L1
L3
L2
180° 0°

242.5 V -90° 2.0 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 2.000A 0.00°
I L2 2.000A 0.00°
I L3 2.000A 0.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
9.958s n/a n/a

Title: OC NI3.0, 5 TIMES@TMS=1.0


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 5.000 A 0.00 ° 50.000 Hz
I L2 5.000 A 0.00 ° 50.000 Hz
I L3 5.000 A 0.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L1
L3
L2
180° 0°

242.5 V -90° 5.0 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 5.000A 0.00°
I L2 5.000A 0.00°
I L3 5.000A 0.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
4.272s n/a n/a
Title: OC NI3.0, 10 TIMES@TMS=1.0
.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 10.00 A 0.00 ° 50.000 Hz
I L2 10.00 A -120.00 ° 50.000 Hz
I L3 10.00 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°
I L3

I L1
180° 0°

I L2
242.5 V -90° 10.0 A
V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 10.000A 0.00°
I L2 10.000A -120.00°
I L3 10.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
2.971s n/a n/a

Title: OC NI3.0, 2 TIMES@TMS=0.5


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 2.000 A 0.00 ° 50.000 Hz
I L2 2.000 A -120.00 ° 50.000 Hz
I L3 2.000 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°
I L3

I L1
180° 0°

I L2
242.5 V -90° 2.0 A
V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 2.000A 0.00°
I L2 2.000A -120.00°
I L3 2.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
4.964s n/a n/a

Title: OC NI3.0, 5 TIMES@TMS=0.5


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 5.000 A 0.00 ° 50.000 Hz
I L2 5.000 A -120.00 ° 50.000 Hz
I L3 5.000 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°
I L3

I L1
180° 0°

I L2
242.5 V -90° 5.0 A
V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 5.000A 0.00°
I L2 5.000A -120.00°
I L3 5.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
2.141s n/a n/a

Title: OC NI3.0, 10 TIMES@TMS=0.5


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 10.00 A 0.00 ° 50.000 Hz
I L2 10.00 A -120.00 ° 50.000 Hz
I L3 10.00 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°
I L3

I L1
180° 0°

I L2
242.5 V -90° 10.0 A
V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 10.000A 0.00°
I L2 10.000A -120.00°
I L3 10.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
1.486s n/a n/a

Title: I>>3.0 A, TIME=0.2 S, APPLIED1.5@I>>


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 4.500 A 0.00 ° 50.000 Hz
I L2 4.500 A -120.00 ° 50.000 Hz
I L3 4.500 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L3

I L1
180° 0°

I L2

242.5 V -90° 5.0 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 4.500A 0.00°
I L2 4.500A -120.00°
I L3 4.500A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
0.209s n/a n/a

Title: I>>5.0 A, TIME=0.1 S, APPLIED1.5@I>>


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 7.500 A 0.00 ° 50.000 Hz
I L2 7.500 A -120.00 ° 50.000 Hz
I L3 7.500 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L3

I L1
180° 0°

I L2

242.5 V -90° 8.0 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 7.500A 0.00°
I L2 7.500A -120.00°
I L3 7.500A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
0.121s n/a n/a

Title: EF PICK UP
.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 209.0 mA 0.00 ° 50.000 Hz
I L2 0.000 A -120.00 ° 50.000 Hz
I L3 0.000 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L1
180° 0°

242.5 V -90° 300.0 mA


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 0.209A 0.00°
I L2 0.000A -120.00°
I L3 0.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
0.049s n/a n/a
Title: EF NI3.0, 2TIMES@TMS=1.0
.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 400.0 mA 0.00 ° 50.000 Hz
I L2 0.000 A -120.00 ° 50.000 Hz
I L3 0.000 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L1
180° 0°

242.5 V -90° 400.0 mA


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 0.400A 0.00°
I L2 0.000A -120.00°
I L3 0.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
10.089s n/a n/a

Title: EF NI3.0, 5 TIMES@TMS=1.0


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 1.000 A 0.00 ° 50.000 Hz
I L2 0.000 A -120.00 ° 50.000 Hz
I L3 0.000 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L1
180° 0°

242.5 V -90° 1.0 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 1.000A 0.00°
I L2 0.000A -120.00°
I L3 0.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
4.279s n/a n/a

Title: EF NI3.0, 10 TIMES@TMS=1.0


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 2.000 A 0.00 ° 50.000 Hz
I L2 0.000 A -120.00 ° 50.000 Hz
I L3 0.000 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L1
180° 0°

242.5 V -90° 2.0 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 2.000A 0.00°
I L2 0.000A -120.00°
I L3 0.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
2.980s n/a n/a

Title: EF NI3.0, 2 TIMES@TMS=0.5


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 400.0 mA 0.00 ° 50.000 Hz
I L2 0.000 A -120.00 ° 50.000 Hz
I L3 0.000 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L1
180° 0°

242.5 V -90° 400.0 mA


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 0.400A 0.00°
I L2 0.000A -120.00°
I L3 0.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
4.987s n/a n/a

Title: EF NI3.0, 5 TIMES@TMS=0.5


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 1.000 A 0.00 ° 50.000 Hz
I L2 0.000 A -120.00 ° 50.000 Hz
I L3 0.000 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L1
180° 0°

242.5 V -90° 1.0 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 1.000A 0.00°
I L2 0.000A -120.00°
I L3 0.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
2.135s n/a n/a

Title: EF NI3.0, 10 TIMES@TMS=0.5


.
Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
V L2-E 0.000 V -120.00 ° 50.000 Hz
V L3-E 0.000 V 120.00 ° 50.000 Hz
I L1 2.000 A 0.00 ° 50.000 Hz
I L2 0.000 A -120.00 ° 50.000 Hz
I L3 0.000 A 120.00 ° 50.000 Hz
Generator Settings
V L1-E 0.000V 0.00° +90°

I L1
180° 0°

242.5 V -90° 2.0 A


V L2-E 0.000V -120.00°
V L3-E 0.000V 120.00°
I L1 2.000A 0.00°
I L2 0.000A -120.00°
I L3 0.000A 120.00°

Binary Inputs
Trip Start Overload
0->1 1->0 1->0
1.504s n/a n/a

Summary
18 tests passed, 0 tests failed, 0 tests not assessed 100.00% passed
Test passed

You might also like