REVC)LIGHTS INSTRUCTION MANUAL Prete by msThanks for purchasing a Revolights bike lighting system, and welcome to the revolution! You have taken it upon yourself to help make the streets safer for cyclists and forward the conversation about bicycle safety. The future is now! The Revolights TeamSUPPORT Revolights strives to supply great products and excellent customer service If you need help or have questions, please contact us by any of the methods below: Online: If you need visual assistance during installation, you can find videos and other installation guides at installation.revolights.com Email: Contact us at any time via [email protected] to receive a reply from a Revolights Support Representative. Phone: Revolights Technical Support is available at +1 (415) 881-7386 9am - 5pm Pacific Standard Time, Monday-Friday.PARTS INCLUDED White Revolights Rings (2) Red Revolights Rings (2) 1 Battery Ring + 1 Passive Ring 1 Battery Ring + 1 Passive Ring with white sticker on each with red sticker on eachZip Ties (6) PARTS INCLUDED Short Screws (16) Long Screws (8) SSsy D> Magnets & Mounts (2) Magnet Extensions (2)PARTS INCLUDED USB Battery Charger (1) CO Rechargeable Batteries (2) 2.5mm Allen Driver (1)PART 1 Front Wheel Installation oeGa) Remove the front wheel from your bike.@) a. Hold the passive ring in your left hand. b. Hold the battery ring in your right hand.(3) Orient the Revolights so that the air valve is in between two bracket pairs. Air valve in between 2 bracket pairs(4) a. Align the first bracket pair around a single spoke and slide it together. b. Rotate the wheel and repeat step a for other three positions.Place the wheel on an object that holds the wheel flat and steady (a roll of tape or a bow! works great).(6) a. Guide the cable behind the nearest spoke. b. Connect the cable on the battery ring to the passive ring until the connector is fully seated.bracket pair. b. Align the spoke adapter so that the spoke slants away from the screw hole. @) a. Snap the first spoke adapter onto the spoke near a ring Spoke slanted away fr the screw holea. Carefully open the bracket pair enough to slide the spoke adapter through. Leave the others brackets together. b. Slide the spoke adapter below the ring brackets.(9) a. Slide the brackets together around the spoke adapter. b. Install the remaing three spoke adapters following steps 7-9 at the other ring brackets.Using your fingers, pull spoke adapter up to bracket pair. TIP: Move only the spoke adapter, try to not pull the ring@) a. Use your finger to hold the spoke adapter. b. Tighten the screw until it is barely tight, then loosen it 1-2 turns. c. Repeat for the remaining three spoke adapters. FIRST SHORT SCREW SECOND SHORT SCREW Repeat a-c with second screw©) a. Install all four long screws into the spoke adapters, inserting them into the non-nut side of the adapter. b. Tighten the screw and then loosen it 1-2 turns.(13) a. Spin the wheel to check for the ring alignment. b. The rings should not wobble as it spins. NOTE: Don't worry about left/right alignment at this point. INCORRECT CORRECT Revolights are not centered on wheel. Revolights are centered on wheelIf the rings wobble during alignment check, adjust the rings as needed by moving opposite brackets. NOTE: If you have to push one, pull the opposite sideTighten all four long spoke adapter screws. 48)6 3 eS k SD 5 = rey Zo a 5 ao 5 2 5 8 eo vo = g = 6 o 3 5 6G © E € D oO w 8 § §3 c= e 28 | Be £ & Ho D 5 ze 1 S wn ee 9°90 Bs2 28 peo Ze Bsa 223 ees vax aa Voy si3 ga 55s a b. INCORRECT: NOT CENTERED(7) Tighten all eight short screws once aligned.PART 2 Back Wheel Installation (@a. Remove the back wheel from the bike. b. The battery ring goes on the rider's left (no cassette) side, the passive ring goes on the right (cassette) side. Cassette right sideRinse and repeat. Repeat steps 3 through 17 for back wheel.Insert the battery into the mount, button first. a Gently press the battery in, until you hear an audible click. b.a. To remove the battery, slide the lever. b. The battery will release from the battery mount.2) Put the wheels back on the bike and turn the Revolights on. If the bike is upside-down, the lights will face inward. The will correct themselves when the bike is upright UPSIDE-DOWN: UPRIGHT: Lights shine inward Lights shine outward(23) In the following steps some parts of the bicycle are named See below for a reference. Note that the view represents the rider's left (non-drive) side of the bicycle. LEFT SIDE Front Fork” Chain Stay BracketInsert two zip ties into the magnet mount through the outer slots.@s) a. Wipe the fork clean. b. Attach the magnet mount on the non-drive (rider's left) side. c. Tighten and trim the zip ties. CALIPER BRAKES: CANTILEVER BRAKES: Magnet mount should be Magnet mount should be aligned as shown mounted opposite brakesa. Attach the magnet mount on the non-drive (rider's left) side with zip ties on the underside of the chainstay bracket b. Tighten and trim the zip ties. (Came Chain Stay Bracket IMPORTANT: Magnet head positioned near outer edge of Revolight(27) With bike upright, spin the front wheel forward. It should form a white arc. If this does not happen, adjust the front magnet alignment per Step 25 & 28. Spin the back wheel using your pedals. It should form a red arc. If this doesn't happen, adjust your rear magnet alignment per Step 26 & 28.Use the magnet extensions to achieve a maximum distance of 1/8" (3mm) between magnet and Revolights. The magnet extensions are not necessary on bicycles with narrow forks or chainstays. WIDE FORKS: NARROW FORKS: Add magnet extensions to magnet mount. Remove magnet extensions from magnet mount, Revolights TireTROUBLESHOOTING TIPS If Revolights are rubbing on the forks or chainstay: Adjust your Revolights' lateral (left/right) alignment (per step 16) If only the battery ring side turns on: Verify the battery cable connection (per step 6). If neither side turns on: Verity the battery is installed correctly per step 21. Verify the batteries are charged. If Revolights do not create arcs while in motion: Most likely your Revolights are not detecting the magnet. Adjust your magnet mount alignment per step 25 or 26. If the Revolights rings rub against brake pads: Depending on your setup, you may have to rotate your brake pads. If any issues persist, please contact customer service. installation.revolights.com * 415.881.7386 * [email protected]CHARGING YOUR BATTERIES 1. Insert the battery into docking station Insert the battery with the button side first into the battery docking station. 2. Snap the battery in place Push the battery into the dock until you hear an audible clickCHARGING YOUR BATTERIES ly] S 3. Plug in the USB cable § Connect USB to Micro-USB charging SS cable into your computer's USB port to begin charging. The battery button will glow orange during charging. When fully charged, the battery button will NOT glow. Release Lever 4. Remove the battery To remove the battery from the battery dock, push in the release lever. Battery will pop out.ONGOING MAINTENANCE Check and tighten the screws regularly.SECURITY The Revolights bike lighting system was designed to deter theft. When you lock up your wheels, you are also locking up your lights.REVOLIGHTS RETURN POLICY We want you to be 100% satisfied with your purchase. If at any time within 60 days of receiving your order you are not satisfied, you may return it for a refund. Any items damaged due to reasons not covered under warranty, cannot be accepted back under our 60 day money back guarantee. Only orders placed through Revolights.com are eligible for returns directly through Revolights, Inc. Revoli- ghts products purchased through other retailers must be returned directly to the retailer in accordance with their respective returns and refunds policy this address: For revolights.com purchases, ship returns t Revolights Returns Department 1601D 63rd Street Emeryville, CA 94608 Ship your package with a carrier that can provide tracking and insurance, Revolights is not responsible for packages lost in transit without proof of tracking. Please note, associated shipping fees are not refund- able Include a copy of your proof of purchase (receipt, gift receipt, or confirmation email) with your returned item Ifyou have any questions about returns, email us [email protected].WARRANTY AND AFTER SALES SERVICE LIMITED WARRANTY Revolights, Inc. (*Revolights") warrants to the original owner this Revolights bike lighting system product (the "Product") against any defects in materials and workmanship and shall provide warranty services and/or replacements during the periods stipulated below, beginning from the date of first purchase to the original owner. If the product is not registered, proof of purchase (such as a copy of the original invoice) is required. For original owners without a valid invoice and users that have not purchased the product from an authorized reseller, the warranty begins from the date the product was shipped from Revolights’ warehouse + The Revolights bike lighting system — one (1) year parts and labor; and + Any consumables (e.g. batteries, magnets, etc) included in the original Product — ninety (90) days free replacement In addition to the warranty exclusions noted below, this worranty does not apply to normal wear and tear resulting from product use and exposure to the elements, except to the extent that the Product's intended performance is effected thereby. Replacement or repair of any defective part or Product will not extend the applicable warranty period. In order for this limited warranty to be valid, proof of purchase is required. If any fault or defect with the Product arises, the following steps must be taken) Notify Revolights of the Product model number, serial number and details of the defect via email to [email protected].{ii) On receipt of this information, Revolights will provide service data or shipping instructionsWARRANTY AND AFTER SALES SERVICE (ii On receipt of Revolights’ shipping instructions, mail the Product prepaid to Revolights. If the Product, is not covered by warranty, an estimate of charges will be furnished by Revolights before any repairs are made.Revolights reserves the right to replace any repairable parts with new or refurbished parts. In no event shall Revolights be held responsible for any other costs, charges, expenses, losses or damages (indirect or otherwise), of any kind whatsoever arising out of a defective Product. WARRANTY EXCLUSIONS The warranty does not apply to any Product (i) that is not installed in compliance with the applicable Product documentation; or (i) on which the original identification marks have been removed or modified. Further, this warranty does not apply to, and Revolights shall not be liable for: (i) Product resulting from accidental damage (e.g., bicycle accident), negligence or misuse (i) any defect in, or failure of, the electrical supply to the Product; (ii) any defect of, or caused by, parts not supplied by Revolights; (iv) normal wear and tear resulting from product use and exposure to the elements; (v) modification, adjustment, repair, disassembly or maintenance performed by any party other than Revolights or its approved subcontrac- tors and retailers; or (vi) due to any other cause which does not result from a defect in materials and workmanship. WARRANTY DISCLAIMERS This written warranty is the only warranty made with respect to the product. Repair, replacement or other ‘appropriate adjustment as provided under this warranty shall be the sole liability of revolights, and the exclusive remedy avoilable to the original purchaser, with respect to the product.WARRANTY AND AFTER SALES SERVICE Revolights shall not be responsible for loss of the product or for other incidental, special ar consequential damages or expenses arising from the product, or for labor or other costs due to installation or removal, or costs of repairs by others, fr for any other expense nat specifically stated above. In no event will revolights' responsibilty exceed the purchase price of the product giving rise to @ claim. Except to the extent prohibited by applicable law, any implied warranties, including that of merchantability or fitness for use or for a particular purpose, are expressly disclaimed. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential damages, 50 the above limitation and exclusion may nat apply to you, This warranty is net transferable, and shall be null and void in the event of any transfer of ownership of the Product. SPEED] Always practice safe cycling: Obey the rules of the road and observe all traffic signs, lights and signals. Wear a helmet at all BO) times and exceed 30mph at your own riskREVQ)LIGHTS e patents.reve ight 2015 Protected by U d international paten’ ights.com