Scribd
Upload
51 views5 pages

CLAP SWITCH Validationboard

The document describes a clap switch, which is a device that uses claps to close an external circuit. It contains a low pass filter, clock, memory register, and relay connected to an AC circuit. The clap switch can be used to conveniently control AC appliances with a clap, making it especially useful for elderly and disabled people who find simple tasks difficult or exhausting. It will be prototyped using common electrical components and tested by having users clap to activate the sensor.

Uploaded by

Veronica Gavan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views5 pages

CLAP SWITCH Validationboard

The document describes a clap switch, which is a device that uses claps to close an external circuit. It contains a low pass filter, clock, memory register, and relay connected to an AC circuit. The clap switch can be used to conveniently control AC appliances with a clap, making it especially useful for elderly and disabled people who find simple tasks difficult or exhausting. It will be prototyped using common electrical components and tested by having users clap to activate the sensor.

Uploaded by

Veronica Gavan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

CLAP SWITCH

INTRODUCTION
 A clap switch is a device that uses claps made by a human to turn close a
external circuit connected on the device. It is composed of a low pass
filter to filter out most noise from the environment, a clock to continually
monitor if there is a clap in a given instant, a memory register to keep
track the state of the relay. And a relay that is connected to an external
AC circuit to control the switch built in that be controlled by energizing the
magnetic coil inside.
I D E A T E Y O UR I D E A
EMPHATIZE Grandparents/Elderly/Senior Citizens
Person with Disabilities (PWD's)
DEFINE The problem is being old and disabled makes simple task
more demanding because its either too exhausting for the
elders or the task is too much difficult because of their
disability.

IDEATE The clap switch can be used on wide array of AC


appliances. This is especially useful to the elderly and to
PWD that are able to clap. Clapping takes less effort and
energy than standing up putting the lights off therefore
making a a difficult task to a convenient one.
HOW WILL YOU I will use resistors, capacitors, electric condenser mic as a
PROTOTYPE YOUR sensor, transistors, LED, timer and a battery.
PRODUCT

HOW WILL YOU TEST I will test my product and clap if the sensor really sense it.
YOUR PRODUCT
EXPERIMENT 1 EXPERIMENT 2

CUSTOMER Elderly/PWD's Anyone in our compound.


SEGMENT
PROBLEM The task is too much They could not stand and move
difficult because of their properly.
age.
SOLUTION Clap Switch Clap Switch

EXPERIMENT Elderlies in my Ask/survey anyone in our


neighborhood. compound if they want to use this
device.
SUCCESS 70% of the respondents 60% of the respondents wants to
METRIC wants to get an alert from get an alert from this device.
this device.
RESULT 80% of the respondents 40% of the respondents wants this
wants this device. device.

ACTION Pursue Pivot


SIMPLIFIED VALIDATION BOARD
CUSTOMER SEGMENT Elderly/PWD's

PROBLEM The task is too much difficult because of their age.

SOLUTION Clap Switch

EXPERIMENT Elderlies in my neighborhood.

SUCCESS METRIC 70% of the respondents wants to get an alert from this
device.

RESULT 80% of the respondents wants this device.

ACTION Pursue

You might also like