Scribd
Upload
256 views3 pages

HPE Server Health Check Report: Hardware - Raid - Cache"

This document contains health check reports for two servers. Server 1 has a smart battery failure issue that requires battery replacement and firmware update. Server 2 has an informational alert about its hard disk configuration using HBA mode instead of RAID, which does not require any action.

Uploaded by

ahmar.hp1212
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
256 views3 pages

HPE Server Health Check Report: Hardware - Raid - Cache"

This document contains health check reports for two servers. Server 1 has a smart battery failure issue that requires battery replacement and firmware update. Server 2 has an informational alert about its hard disk configuration using HBA mode instead of RAID, which does not require any action.

Uploaded by

ahmar.hp1212
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

HPE Server Health Check Report

Visit Dated: 26 Jan 2020


Server 1

Product number:        755262-B21


Serial number:            CZJ6260BBN
Subject:                      HPE ProLiant DL360 Gen9 Server Models - 313 Smart Battery Failure
Issue:                         Error 313 Smart Battery Failure and not charging

Solution:                   Battery replacement and firmware update of the server after
required Backup

Logs Analysis: Error appears in server IML log viewer and in the Bios event history

Server 2

Product description: HPE ProLiant DL360 Gen10 4110 2.1GHz 8-core 1P 16GB-R P408i-a
SFF 500W PS Performance Server
Product number:         P06453-B21
Serial number:            CZJ92204P1
Issue:                         Informational Alert regarding the “ hardware_raid_cache”

Solution:       The server HDDs are not configured using RAID Mode of Smart array
Controller but using the HBA mode. The hardware RAID controller
>> Cache Status will remain in Not Configured state. This feature is
by design and message is informational as HBA does not support cache.
Hence, no action is required. All the other servers configured in similar
way, shall have the same Informational Alert.                      

Logs Analysis by HPE support: From hardware perspective, we do not see any hardware
failure. There is no RAID configured. It is blank. We have checked the array report and
RAID BIOS screenshots, and found no error in the report.

There is no cache configured, since no RAID configured. Cache is available only in the
RAID mode of the Smart Array controller.

Configured Logical Drives    0 (0x00)


[ Top ] → [ HPE Smart Array P408i-a SR Gen10 in Embedded Slot ] → Cache Config Status
Read Cache Size    0 (0x0000)
Write Cache Size    0 (0x0000)
Drives configured in a HBA Mode
HPE Smart Array P408i-a

You might also like