According To EN ISO/IEC 17050-1:2004

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

DECLARATION OF CONFORMITY

According to EN ISO/IEC 17050-1:2004

Manufacturer’s Name: Keysight Technologies Malaysia Sdn.Bhd


Manufacturer’s Address: Bayan Lepas Free Industrial Zone
11900 Penang, Malaysia

Declares under sole responsibility that the product as originally delivered


Product Name: Data Acquisition/Switch Unit
Model Number: 34970A, 34972A (plus modules 34901A, 34902A, 34903A, 34904A, 34905A,
34906A, 34907A, 34908A)
Product Options: This declaration covers all options of the above product(s)
Serial Number: Covers all products starting MY57000101 and SG57000101
complies with the essential requirements of the following applicable European Directives, and carries the
CE marking accordingly:
Low Voltage Directive (2014/35/EU)
EMC Directive (2014/30/EU)
RoHS Directive (2011/65/EU)
and conforms with the following product standards:

Standards Limit
IEC61326-1:2012 / EN61326-1:2013
EMC ▪ CISPR 11:2009/ EN 55011:2009 Group 1 Class A
▪ IEC 61000-4-2:2008 / EN 61000-4-2:2009 4 kV CD, 8 kV AD
▪ IEC 61000-4-3:2006+A1:2007+A2:2010 / EN 61000-4- 3 V/m (80 MHz-1.0 GHz)
3:2006+A1:2008+A2:2010 3 V/m (1.4 GHz-2.0 GHz)
1 V/m (2.0 GHz-2.7 GHz)
▪ IEC 61000-4-4:2004+A1:2010 / EN 61000-4-4:2004+A1:2010 0.5 kV signal lines, 1 kV power lines
▪ IEC 61000-4-5:2005 / EN 61000-4-5:2006 0.5 kV line-line, 1 kV line-ground
▪ IEC 61000-4-6:2008 / EN 61000-4-6:2009 3 V (0.15 MHz-80 MHz)
▪ IEC 61000-4-8:2009 / EN 61000-4-8:2010 3A/m
▪ IEC 61000-4-11:2004 / EN 61000-4-11:2004 100% Dip (0.5 cycle, 1 cycle)
30% Dip (25 cycles)
100% short interruptions (250 cycles)
Canada: ICES/NMB-001: Issue 4, June 2006
Australia/New Zealand: AS/NZS CISPR 11:2011

Safety IEC 61010-1:2010/EN 61010-1:2010; IEC 61010-2-030:2010/EN61010-2-030:2010


Canada: CAN/CSA-C22.2 No.61010-1-12; CAN/CSA-C22.2 No. 61010-2-030-12
USA: ANSI/UL Std. No. 61010-1:2012; ANSI/UL Std No.61010-2-030:2012

RoHS EN 50581 : 2012


Supplementary Information:

This product is intended for use in a basic environment.


The products were tested in a typical configuration with Keysight Technologies test systems.

RoHS Exemptions applied


5(a) Lead in glass of cathode ray tubes
5(b) Lead in glass of fluorescent tubes not exceeding 0.2% by weight
6(a) Lead as an alloying element in steel containing up to 0.35% lead by weight
6(c) Lead as an alloying element in copper containing up to 4% lead by weight
7(a) Lead in high melting temperature type solders (i.e. lead based solder alloys containing 85% by weight or more
lead)
7(c)-I Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in
capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound

This DoC applies to above-listed products placed on the EU market after:

April 22, 2019


Date Tay Eng Su
Quality Manager

For further information, please contact your local Keysight Technologies sales office, agent or distributor.
Or Keysight Technologies Deutschland GmbH, Herrenberger Straße 130, 71304 Böblingen, Germany

DoC Revision: F

You might also like