Scribd
Upload
56 views2 pages

Product Overview: NCP3170: Buck Regulator, Switching, PWM, 3.0 A

The NCP3170 is a synchronous buck regulator that can operate from 4.5V to 18V input and produce up to 3A output with voltages as low as 0.8V. It has integrated high and low-side MOSFETs, fixed 500kHz or 1MHz switching frequencies, soft-start, and protection features to reduce external components. The NCP3170 is available in an SOIC-8 package and is suitable for applications such as LCD/DTV, networking equipment, and graphics cards.

Uploaded by

RadhamePerez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views2 pages

Product Overview: NCP3170: Buck Regulator, Switching, PWM, 3.0 A

The NCP3170 is a synchronous buck regulator that can operate from 4.5V to 18V input and produce up to 3A output with voltages as low as 0.8V. It has integrated high and low-side MOSFETs, fixed 500kHz or 1MHz switching frequencies, soft-start, and protection features to reduce external components. The NCP3170 is available in an SOIC-8 package and is suitable for applications such as LCD/DTV, networking equipment, and graphics cards.

Uploaded by

RadhamePerez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Product Overview

NCP3170: Buck Regulator, Switching, PWM, 3.0 A

For complete documentation, see the data sheet.

The NCP3170 is a flexible synchronous PWM Switching Buck Regulator. The NCP3170 operates from 4.5 V to 18 V, producing up
to 3 A and is capable of producing output voltages as low as 0.8 V. The NCP3170 also incorporates current mode control. To reduce
the number of external components, a number of features are internally set including soft start, power good detection, and switching
frequency. The NCP3170 is currently available in an SOIC-8 package.

Features Benefits
• 4.5 V to 18 V Operating Input Voltage Range • Wide input voltage range
• 90mΩ High-Side, 24mΩ Low-Side MOSFET • Very high efficiency at low output voltages
• Output Voltage Adjustable to 0.8 V • Ability to regulate low output voltages
• 3 A Continuous Output Current • High current output
• Fixed 500 kHz and 1 MHz PWM Operation • Scale for efficiency or physical size
• 1.5% Initial Output Accuracy • Easy to design accurate system regulation
• Internal 4 ms SoftStart • Reduced external components
• ShortCircuit Protection • Protection feature
• Thermal Shutdown • Protection feature
• Light Load Efficiency • Enhanced efficiency at lower output current
For more features, see the data sheet

Applications End Products


• Point of Load (POL) DC/DC Regulator • LCD-TV / DTV
• Set-Top-Box (STB) • Telecom / Datacom / Networking
• PCIe Graphics Cards

Part Electrical Specifications


Product Pricing ($/Unit) Compliance Status Topology Control VCC Min VCC Max VO Typ IO Typ Efficienc fSW Typ Package
Mode (V) (V) (V) (A) y (%) (kHz) Type
NCP3170ADR2G 0.3333 Pb-free Active Step- Current 4.5 13.2 1.25 to 3 92 500 SOIC-8
Down Mode 5.0
Halide free 18
non AEC-Q
and PPAP

NCP3170BDR2G 0.5 Pb-free Active Step- Current 4.5 13.2 1.25 to 3 92 1000 SOIC-8
Down Mode 5.0
Halide free 18
non AEC-Q
and PPAP
Application Diagram

For more information please contact your local sales support at www.onsemi.com.
Created on: 10/31/2020

You might also like