Scribd
Upload
16 views

Code 2

This document outlines seismic design parameters and specifications for earthquake resisting structures. It provides peak ground acceleration and response spectral acceleration coefficients for two levels of earthquake ground motion. It also lists sections that will cover specifications for concrete, steel, aluminum and wood structures. Finally, it provides requirements for longitudinal and transverse reinforcement ratios and dimensions for precast concrete pile foundations.

Uploaded by

monlee quilala
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
16 views

Code 2

This document outlines seismic design parameters and specifications for earthquake resisting structures. It provides peak ground acceleration and response spectral acceleration coefficients for two levels of earthquake ground motion. It also lists sections that will cover specifications for concrete, steel, aluminum and wood structures. Finally, it provides requirements for longitudinal and transverse reinforcement ratios and dimensions for precast concrete pile foundations.

Uploaded by

monlee quilala
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 44

1.

4 SEISMIC DESIGN PHILOSOPHY


APPENDIX 1A: EARTHQUAKE RESISTING SYSTEMS (ERS)
Horizontal PGA for Level 1 EGM: 0.12g
Horizontal Response Spectral Acceleration Coeff. @ T=0.2sec, Level 1 EGM: 0.3g
Horizontal Response Spectral Acceleration Coeff. @ T=1sec, Level 1 EGM: 0.12g

Horizontal PGA for Level 2 EGM: 0.6g


Horizontal Response Spectral Acceleration Coeff. @ T=0.2sec, Level 2 EGM: 1.25g
Horizontal Response Spectral Acceleration Coeff. @ T=1sec, Level 2 EGM: 0.45g
fda
SECTION 5: CONCRETE STRUCTURES SECTION 6: STEEL STRUCTURES
SECTION 7: ALUMINUM STRUCTURES

SECTION 8: WOOD STRUCTURES


SECTION 10: FOUNDATIONS
SECTION 11: WALLS, ABUTMENTS, AND PIERS
SECTION 12: BURIED STRUCTURES AND TUNNEL LINERS
Longitudinal Reinforcement Transverse Reinforcement
Element Ratio Diameter Spacing Ratio Diameter
Min Max Min Max Min Max Min Max Min
Driven Pile Foundation
Precast Concrete Pile 0.01 10mm
Transverse Reinforcement
Remark
Diameter Spacing
Max Min Max Code
NSCP15_308.5
min(8*dl, within confinement
150mm)
min(16*dl, outside
200mm) confinement region

You might also like