Aeroscope Management System

(AMS)
User Guide v1.0

2019.07
   Searching for Keywords
Search for keywords such as “FOV” and “mount” to find a topic. If you are using Adobe Acrobat Reader
to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.

  Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.

Printing this Document

This document supports high resolution printing.

Using this Manual

Legend

Warning Important Hints and Tips Explanation

Downloading Documents

Visit the link below to download the latest Aeroscope Management System User Guide and other
documents related to Aeroscope Management System (AMS).

https://www.dji.com/aeroscope

2   © 2019 DJI All Rights Reserved.

Contents

© 2019 DJI All Rights Reserved.   3

Introduction
Aeroscope Management System (AMS) is the core of the entire drone security system. It uses the
advanced information management technology to achieve central monitoring, command investigation
and statistical historical flight data, providing management with complete drone monitor functions to
make public airspace more secure.

Account and Basic Settings

Account
Account and password are required to log in the AMS. Please contact DJI sales or the agent to obtain
the account and password.

• The account can only be logged in on one terminal device.

• The system remains in the 24-hour login state after successfully logged in, and will be
disconnected automatically within 24 hours. Please log in to the system again.

Login
1. Open the Chrome browser and visit the URL https://aeroscope.djiservice.org.
2. Enter the username and password provided by the DJI sales or the agent to complete the login.

4   © 2019 DJI All Rights Reserved.

 Aeroscope Management System (AMS) User Guide

Basic Settings
Used to set some basic information of your account.

1
2
3
4

1. You can switch languages in the drop-down menu, both Chinese and English are supported
currently.
2. Profile: The system icon and the system title displayed in the upper left corner of the website can be
customized.
3. Set the system login default location and country or region to facilitate the home page to display the
map around the default location.
4. Change password: You can modify the password.

Homepage
The homepage is mainly used to display information in real time, including: number of drones, number
of working Aeroscope units, and the real-time positions of the aircraft, etc.
1 2 3 4

7 6

© 2019 DJI All Rights Reserved.   5

Aeroscope Management System (AMS) User Guide

1. Number of Drones
If an aircraft is detected, click on the aircraft section to view a summary of the aircraft in real time. At
the same time, a green aircraft icon will be displayed on the map as the real-time flight position of the
aircraft detected.
2. Number of active Aeroscope units
Click to view the information about the Aeroscope unit that is active under the current account. If
the number of Aeroscope is not zero, a blue monitor icon will be displayed on the map, which is the
actual location of the monitor.
3. Legend
Set the map legend and the layer display mode.
4. Settings
5. Select map source and use distance measurement tool.
6. Detected drones
Tap on the aircraft icon to view the details of the aircraft.
7. Message alert box
A text alert will be displayed if Aeroscope detects aircraft activity.
8. Drone information
Detailed aircraft information.

Flight History
Users can query or export historical detection records.

1. Search
Users can search for the corresponding detection record by keywords such as flight number and
device ID.
2. Export
Users can customize the report for selecting and exporting historical monitoring flight records.
3. Track playback
Click the “Track Playback” button to view the corresponding historical flight path record.
6   © 2019 DJI All Rights Reserved.
 Aeroscope Management System (AMS) User Guide

Device Settings
Configure parameters, manage certificate and monitor the status of the Aeroscope unit.

Device List
View a list of all the units bound to the account. The online monitor displays a blue box, while the offline
one displays a gray box. You can perform operations such as "Upgrade", "Restart", "Configuration", and
"Details" on the unit that is online.
1. Upgrade: Click the "Upgrade" button to enter the upgrade page as below, you can upgrade or
downgrade the firmware.

© 2019 DJI All Rights Reserved.   7

2. Restart: Click the "Restart" button, the Aeroscope unit will restart immediately (restart will take a few
minutes).
3. Configuration: Click the “Aeroscope Settings” button to enter the Aeroscope parameter configuration
page, including Network, Modem, Spectrum Analysis, Debugger, Upgrade, BIST, Firmware Version.
(1) Network configuration: You can view or modify the network parameter settings of the Aeroscope
unit.

(2) Modem configuration: set antenna mode and receiver type. Note: it is not recommended to
change the device related settings.

8   © 2019 DJI All Rights Reserved.

(3) Spectrum Analysis: You can set the corresponding Data Update Rate and Sweep Time. Click
“Start” to view the status of signals at 2.4GHz/5.8GHz.

(4) Debugger: It is recommended that only qualified personnel, such as developers modify the
settings here to debug.

© 2019 DJI All Rights Reserved.   9

Aeroscope Management System (AMS) User Guide

(5) Upgrade: Select Update or a specific firmware version in the firmware list to update the firmware.
Downgrading is also supported.

(6) BIST: Users can set the BIST parameters and perform self-tests for the Aeroscope unit.

10   © 2019 DJI All Rights Reserved.

 Aeroscope Management System (AMS) User Guide

(7) Firmware version: You can view the firmware package version of the Aeroscope unit and the
firmware version of each built-in module.

4. Details: Click on the “Details” button to see the detailed operating status of each module within the
Aeroscope unit.

© 2019 DJI All Rights Reserved.   11

Aeroscope Management System (AMS) User Guide

Data Management
In the Data Management section, you can view the Aeroscope log, Aeroscope Data, and Connection
Logs.

Note that the logs or records can be exported, but the connection logs cannot.

Certificate Management
In the "Certificate Management" section, you can manage the device certificate by enrolled in a "trust
list" or a "pending list".

12   © 2019 DJI All Rights Reserved.

 Aeroscope Management System (AMS) User Guide

Statistical Report
The Statistical Report page shows an overview and an analysis of the detection data, which can be
helpful to users.
1. In the Statistical Report page, users can set the time range, and then the system will generate charts
based on the selection.

2. Click the button in the upper right corner to switch to the heat map, which displays the detection
frequency and location distribution in the surrounding areas.
Note that the different color areas indicate the frequency of the aircraft activity. The smaller the radius
of the heat map, the more details you can see.

© 2019 DJI All Rights Reserved.   13

Aeroscope Management System (AMS) User Guide

Advanced Monitoring
Advanced Monitoring makes it easy for users to set up specific monitor rules with powerful
customization features.
Advanced Monitor displays a list of all created monitoring rules that the user can edit, delete, start,
or pause. Click the "Add Advanced Monitoring Task" button in the upper right corner to add a new
monitoring rule.

1. Enter the name of the monitoring rule.

2. Set the "Monitoring Task Priority", with level 9 being the highest level.

3. Set the "Default Status after Publishing". If "Pause" is selected, manual activation is required after the
rule is created. If "Start" is selected, the rule will take effect immediately after it is created.

14   © 2019 DJI All Rights Reserved.

 Aeroscope Management System (AMS) User Guide

4. Customize the "Monitoring Time" with a specific time range and date range.

5. Set the "Monitoring Area". If "All" is selected, the system will monitor all areas that it can cover; if
"Draw and Select an Area" is selected, the user can set the area to be monitored with a circle or
polygon on the map.

6. Set the "Monitor Task Object". If "All" is selected, the system will monitor all aircraft within the scope.
If "Specific Task Subject" is selected, one or several aircraft will be monitored specifically.
Note: Selecting " Specific Task Subject" requires entering the device ID (i.e., the flight control serial
number) of the specified aircraft to be monitored in advance.

7. Set "Monitor Subject Behavior". If "Monitoring Subject Appears in the Target Range" is selected, a
system warning will be triggered as soon as the monitored object appears in the planned monitor
range. If "Flight Altitude Exceeding Given Altitude" is selected, then the System warning will be
triggered when the monitored object is flying above the specified altitude within the planned
monitoring range.

© 2019 DJI All Rights Reserved.   15

Aeroscope Management System (AMS) User Guide

8. Set the "Alert Mode" to select one or more warning alert methods at the same time.

9. Finally, click "Save" to complete the creation of all rules.

16   © 2019 DJI All Rights Reserved.

This content is subject to change.
Download the latest version from
https://www.dji.com/aeroscope

If you have any questions about this document, please contact DJI by sending a message to
[email protected].

Copyright © 2019 DJI All Rights Reserved.