Scribd
Upload
642 views1 page

Conversion AFBMA - To - SKF

This document provides a mapping between bearing interchange codes from AFBMA to SKF. It lists the symbols used in each standard and their descriptions to translate between the two coding systems. Key elements that are translated include bore diameter, bearing type, dimension series, cage type, seals/shields, tolerance class, lubrication, and special features. The document allows identification of the equivalent SKF bearing when only the AFBMA code is known.

Uploaded by

GABRIEL MATTOS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
642 views1 page

Conversion AFBMA - To - SKF

This document provides a mapping between bearing interchange codes from AFBMA to SKF. It lists the symbols used in each standard and their descriptions to translate between the two coding systems. Key elements that are translated include bore diameter, bearing type, dimension series, cage type, seals/shields, tolerance class, lubrication, and special features. The document allows identification of the equivalent SKF bearing when only the AFBMA code is known.

Uploaded by

GABRIEL MATTOS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Bearing Interchange From

AFBMA → SKF
90 BC 03 J PP N 3 0 X ↔ 6 3 18 ZZ N C3 HT51
1 2 3 4 5 6 7 8 9 10 2 3 1 5 6 4 (8), 7 10 9

SYMBOLS
SYMBOLS
AFBMA SKF DESCRIPTION AFBMA SKF DESCRIPTION
1. Bore Diameter ÷ 5 6. Snap Ring Groove
90 XX18 AFBMA/5 = SKF N N Groove without Ring
Exc. 17 = XX03 A NB Groove without Ring
15 = XX02 On same side as
12 = XX01 Seal/Shield
10 = XX00 G NR Groove with Ring
C NBR Groove with Ring on
2. Bearing Type Same side as Seal/Shield
BC 6XXX Conrad
BL XXX Maximum Capacity 7. Radial Clearance/Preload
BN 7XXX CD Angular Contact (15°) 0 - Normal Clearance
7XXX CC Angular Contact (12°) 1 C1 Tighter Than C2
BA 7XXX ACD Angular Contact (25°) 2 C2 Tighter Than Normal
BT 7XXX B Angular Contact (40°) 3 C3 Looser Than Normal
4 C4 Looser Than C3
3. Dimension Series 5 C5 Looser Than C4
00 X0XX Extra Light
02 X2XX Light 7 GA Light Preload
03 X3XX Medium 8 GB Medium Preload
04 X4XX Heavy 9 GC Heavy Preload

4. Cage Type 8. Tolerance Class


X - Any Type 0 - Normal ABEC1, ISO
J J Pressed Steel 6 P6 P7
Y, K Y Pressed Brass 5 P5 ABEC 3, ISO P6
M M Machined Brass 4 P4 ABEC 5, ISO P5
2 P9A ABEC 7, ISO P4
5. Seals/Shields or Duplex Mounting ABEC 9
X - Character Separator
P Z (PP - 2Z, Two Shields) 9. Lubrication
E RSI (EE – 2RS1, Two Seals) X - Any Slush or Grease
A - Refer to Manufacturer
RR DB Duplex Back-to-Back
UU DF Duplex Face-to-Face 10. Special Features
TT DT Duplex Tandem (Refer to SKF Engineering)

You might also like