1540 - Kat - EM - en - LoRes Elektromotoren PDF

D.C.
motors with and without

transmissions, blowers and pumps
Order no.: 1 987 721 540 Order no.: 1 987 721 076 Order no.: 1 987 721 021
Order no.: 1 987 721 029 Order no.: 1 987 721 074
The proper drive for your projects
Bosch electric motors for

industrial applications
Bosch provides a wide range of

technically and economically interesting
product solutions. Take advantage of our
engineers’ experience gathered from
application in millions of automobiles
and from many other industrial uses.
The ideal contact person can be found

on the last page of the catalogue.
Electric motors 2006 | 2007
1 987 721 540/200606 www.bosch-elektromotoren.de
AA/MKM3 - 06.2006 - En Copy deadline: 31.05.2006

Subject to changes without notice!
© 2006 Robert Bosch GmbH
Please address your queries and
Automotive Aftermarket
information to our agency.
P.O. Box 41 09 60
With the publication of this issue all
76225 Karlsruhe, Germany
previous issues are rendered invalid.
Token fee: € 5,00
4 047023 039880
The right drive for your projects – Bosch electric motors Bosch contacts worldwide
for sales and advice
Belgium / Holland Israel Switzerland
Robert Bosch Benelux Ledico Technologies Ltd. Robert Bosch AG

Afdeling/Département RBBN/SOE Adi Tasman Automobiltechnik Industrie
Rue H. Genessestraat 1 P.P. Box 1746 Industriestrasse 31
B - 1070 Brussels Holon 8112 Otelfingen
Tel.: +32 2 525 5271 Tel.: +972 3 650 4017 Tel.: +41 (0)44 847 15 30
Fax: +32 2 525 5262 Fax: +972 3 650 4055 Fax: +41 (0)44 847 15 29
Email: [email protected] Email: [email protected] Email:
[email protected]
Czech Republic Italy Turkey
Robert Bosch odbytova sro Robert Bosch S.p.A. Bosch San. ve Tic. A.S
David Komrska Claudio Vailati Department RBTR/SAA
Automotive Aftermarket (AA/SEM1-SSD3) AA/SIT Ahi Evran Cad. No: 1 Kat: 22
Pod Visnovkou 1661/35 Via M.A. Colonna, 35 Polaris Plaza - Maslak
14000 Prague 20149 Milan Istanbul
Tel.: +420 261300-504 Tel.: +39 02 36 96 - 2387 Tel.: +09 (0) 212/335-0655
Fax: +420 261300-524 Fax: +39 02 36 96 - 2423 Fax: +09 (0) 212/346-0053
Email: [email protected] Email: [email protected] Email: [email protected]
Denmark / Norway Japan United Kingdom
Robert Bosch A/S Bosch Corporation Robert Bosch Ltd

Eda Hojenski Andreas Ziegeler Dept AA/SEU/motors and controls
AA/SDK Department JA/MKT2 PO Box 98
Telegrafvej 1 3-6-7, Shibuya, Uxbridge
DK - 2750 Ballerup Shibuya-ku, UB9 5HN
Tel.: +45 4489 8321 Tokyo 150-8360 Tel.: +44 (0) 1895 838371
Fax: +45 4489 8680 Tel.: +81 3 5485-5982 Fax: +44 (0) 1895 838333
Email: [email protected] Fax: +81 3 5485-6386 Email: [email protected]
Email: [email protected]
Finland Republic of South Africa USA
Robert Bosch Oy Robert Bosch (Pty) Ltd Chief Enterprises, Inc.

Ensiasennustuotteet Uwe Winzler Bob Socha
Ansatie 6aC Sales OE & Engineering (RBSA/SOE) 545 W, Lake St.
Electric motors from Bosch encourage movement in product development 01740 Vantaa P.O. Box 348 Elmhurst, IL 60126
Tel.: +358 9 435 991 BRITS Tel.: +01 630-530-1154
With its competence, Bosch, as the leading global developer and manu- Fax: +358 9 435 992 28 0250 North West Province Fax: +01 630-530-1224
facturer of automotive technology, has proved itself millions of times over Email: ensiasennus@fi.bosch.com Tel.: +27 12 381 3445 Internet: www.chiefent.com
in mobile applications. As a development partner to various industrial Fax: +27 12 250 2646
branches, Bosch is aligned to the requirements of its customers. Thus, Email: [email protected]
Bosch electric motors are also the ideal solution for many applications
outside of the automobile. The total of its advantages are immediately
France Spain / Portugal
obvious, where quality, reliability and inexpensive prices through high-volume
production are called for. Robert Bosch France S.A.S. Robert Bosch España, S.A.
Patrick Landes AA/SSP
Industrial customers in particular, expect to have competent contact AA/SSD3-SO Hnos. García Noblejas, 19
partners at their suppliers. To this end, an independent engineering team 32, Avenue Michelet E - 28037 Madrid
has been set up. Bosch engineers will advise and support you in the applica- 93404 Saint-Ouen Cedex Tel.: +34 91 327 96 59
tion engineering for D.C. motors, blowers and pumps. Tel.: +33 1 40 10 76 90 Fax: +34 91 410 41 64
The proper contact person can be found on the last page of the catalogue. Fax: +33 1 40 10 73 08
Email: [email protected]
www.bosch-elektromotoren.de
Germany Sweden
Robert Bosch GmbH Robert Bosch AB

Department AA/SSD3 Industriförsäljning
P.O. Box 41 09 60 Box 1154
76225 Karlsruhe 164 26 Kista
Tel.: +49 (0) 721/942-2278 Tel.: +46 (0)8 750 1570
Fax: +49 (0) 721/942-2520 Fax: +46 (0)8 750 1560
Email: [email protected] Email: [email protected]
Electric motors
Unlimited service –
Bosch electric motors 2
Parameter explanation 4
D.C. motors without transmission 10
D.C. motors with transmission 50
Blowers with D.C. motors 94
Water pressure pumps
with D.C. motors 114
Water-circulation pumps
with D.C. motors 116
Bi-pressure pump 124
Solenoid valves 126
Part numbers 130
Data-sheet inquiry 132
Notes
This catalog lists the standard parts supplied, with all the technical infor-
mation normally required by design engineers to select the best motor for
their particular requirements. These motors were originally designed for
use in motor vehicles.
We recommend that Bosch be consulted first before you use motors for
any applications other than those specified, particularly in the case of
other requirements, loads, or environmental conditions.
Please use the “Inquiry Sheet” for this purpose.
Subject to change.
The current drawings quoted shall prevail.
2 | Unlimited service – Bosch electric motors
Unlimited service – Bosch electric motors
The worldwide competent partner for industrial applications
As the largest manufacturer of electric motors in Europe, Bosch provides a broad working range and through outstanding flexibility for adaptation
its customers with a comprehensive range of products including brushless to different requirements and installation situations. In addition to this they
D.C. motors and brush-type D.C. motors. are extremely quiet and very robust (see D.C. motors without transmis-
Bosch electric motors are developed for the automotive industry and sion).
installed into automobiles and commercial vehicles as drives for wiping Bosch plants around the globe operate according to the stringent, inter-
systems, engine cooling and passenger compartment air-conditioning as nationally-binding Bosch quality guidelines, which only permit products for
well as for the adjustment of windows, sliding roofs and seats. series production that have been well-proven in tough endurance tests. For
The Bosch electric motors referred to here are permanent-magnet-excited several years now, Bosch has also extremely successfully provided its pro-
D.C. motors. They excel on account of an excellent power/weight ratio, ducts to customers outside the automobile industry.
Bosch Automotive Aftermarket 2006 | 2007

Unlimited service – Bosch electric motors | 3
Bosch worldwide
production sites:
• Toluca, Mexico
• Albion, USA
• Campinas, Brazil
• Castellet, Spain
• Bühl, Germany
• Miskolc, Hungary
• Brits, South Africa
• Changsha, China
• Penang, Malaysia
• Suzhou, China
• Buyong, Korea
• Clayton, Australia
Customer orientation in development, production and sales
Innovative technology from Individual solutions for your Professional customer service
the automobile industry application
• Many million times well proven and reliable • The right solution for every requirement – • Engineering team for new developments –
Bosch quality – As a leading developer Due to a variety of different designs and sizes, Right from the very start, Bosch engineers
and manufacturer of automotive technology the Bosch range of electric motors provides provide their support and advice in the appli-
Bosch is also a mobile and experienced partner a great deal of flexibility for installation and cation engineering for D.C. motors, blowers
outside the automobile industry. use. or pumps.
Bosch electric motors operate in a D.C.
• Bosch electric motors operate absolutely voltage range of 12 to 24 Volt. They are also • All-encompassing customer orientation –
reliably – They are available in a light and optionally available with and without Hall Bosch guarantees worldwide uniform pro-
compact design, have a high output and long elements. duction and quality standards, and availability
service life. of its products.
• Successful application examples –
• Price and performance, that match up – Power-operated hospital beds, wheel chairs, • Technical information –
High-volume production results in inexpensive garage-door drives, lawnmowers, locking Comprehensive information on Bosch electric
prices. systems and output systems, electric mopeds motors is available in our catalogue or on
and lots more. the available CD-ROM. Apart from this, you
can also find all technical details online at
www.bosch-elektromotoren.de.
2006 | 2007 Bosch Automotive Aftermarket

4 | Parameter explanation
Parameter explanation
Nominal values IP degrees of protection

Nominal value Example
Value of a variable (e.g. voltage, current, Theoretically, a nominal voltage of 24 V and Valid for electrical equipment of
resistance ...) according to which a motor, a rated current of 35 A result in a power input road vehicles as under IEC 60 529 and
blower, or pump, or its characteristics and parts of P1: DIN 40 050, Part 9.
are specified or according to which they are P1 = UN · IN; P1 = 24 V · 35 A; P1 = 840 W.
designated. This power consumption P1 and the output P2N Protection of electrical equipment within
(see Fig. page 7) determined from the characte- housing against influence of solid foreign
Power consumption P1 ristic-curves chart are used to calculate the bodies including dust.
efficiency É:
P1 = U · I Protection of electrical equipment within
housing against ingress of water.
P2N 600 W
P1 Power consumption in W É= = = 0.71 = 71 %
P1 840 W
U Voltage in V Protection of people against touching
I Current in A hazardous parts1 within housing.
Rated torque MN
1
Output power P2 The motor’s rated torque is calculated from: Moving mechanical parts.
For motors the output power P2 is always given.
60 P
MN = · 2N
Ñ 2Ñ nN
P2 = 2 ·M · n
60
MN Rated torque in Nm
P2 Output power in W P2N Rated power output in W
M Torque in Nm nN Rated speed in min–1
n Rotational speed in min–1
Rated speed nN
Efficiency É Rated speed refers to the speed of a
Efficiency refers to the relationship between motor supplied with rated voltage and driven
mechanical output P2 and electrical power at a rated output.
input P1.
Direction of rotation
P2 When looking at the motor’s shaft end, clockwise
É2 =
P1 operation is deemed to be right-handed rotation.
For motors with two shaft ends, the shaft
end opposite the commutator determines the
direction of rotation.
Short-circuit values
The current consumed by the motor in case of
short-circuit (when armature is braked to stand-
still), is the maximum current Imax.
When a short circuit occurs, the maximum torque
MA (breakaway torque) is effective.
Fastening Cooling
Housing fastening: By means of screws on Internal natural cooling: open-type design,

the motor or transmission housing. Blowers without fan.
are fastened in a similar manner, either to
the drive motor or the air shroud. Internal natural cooling: open-type design,
with separate fan.
Flange mounting: The motor’s drive-end
support has a two or three-hole flange, Internal forced-air cooling: open-type design,
or the front side contains three or four with externally-driven fan.
threaded holes for fastening.
Surface natural cooling: closed design,
without fan.
Surface natural cooling: closed design,

with separate fan.

Parameter explanation | 5
IP-code structure
IP 2 !2) 3 !3) C M If an index number is not given, then the

letter “X” must be substituted (i.e. “XX”,
Code letters if both index numbers are missing).
Additional and/or supplementary letters can
First index number be omitted without any substitution.
0...6 or letter X 2)
The supplementary letter “K” is placed
either immediately after the first index
Second index number numbers 5 and 6 or immediately after the
0...9 or letter X second index numbers 4, 6 and 9.
3)
During the water test for example: IP16KB
Supplementary letter (facultative)
protection against ingress of solid foreign
A, B, C, D bodies with a diameter > 50 mm, pro-
Supplementary letter (facultative) tection against powerful spray water at
high pressure, protection against being
M, S
touched by fingers.
K2)
Explanations of IP code
1. Index number Protection of People 2. Index number Protection of Letter Protection of Letter
and supple- electrical equip- and supple- electrical equipment (facultative) people in event (facultative)
mentary letter ment against mentary letter against ingress of contact with
K ingress of foreign K of water hazardous parts
bodies
0 Not Not 0 Not A Protection M Motion of
protected protected protected against contact moving parts 3)
with back of hand
1 Protection against Protection 1 Protection B Protection S Standstill of
foreign bodies against contact against vertical against contact moving parts 3)
Ø > 50 mm with back of hand droplets with fingers
2 Protection against Protection 2 Protection C Protection
foreign bodies against contact against droplets, against contact
Ø > 12.5 mm with fingers 15° Inclination with tools
3 Protection against Protection 3 Protection D Protection
foreign bodies against contact against against contact
Ø > 2.5 mm with tools spray water with wire
4 Protection against Protection 4 Protection
foreign bodies against contact against
Ø > 1.0 mm with wire spray water
5K Dust-protected Protection 4K Protection
against contact against spray water
with wire with increased
pressure
6K Dust-proof Protection 5 Protection
against contact against
with wire spray water
6 Protection
against powerful
spray water
6K Protection
against powerful
spray water with
increased pressure
7 Protection
against temporary
immersion
8 Protection
against permanent
immersion
9K Protection
against high pressure/
vapor pressure
cleaning

Operating modes (VDE 0530)

Continuous operation S 1 Short-term operation S 2 Intermittent operation S 3
Operation with constant load condition, Operation with constant load condition, which Operation, comprised of a sequence of similar
the duration of which is sufficient to reach the does not last long enough however to enable the cycles, each of which encompasses a time with
thermal steady-state condition. thermal steady-state condition to be reached, and constant load and a pause, whereby the startup
a subsequent pause, which lasts long enough for current does not exert any perceptible influence
Parameters for curve inspection the motor temperature not to deviate more than on heating.
P1 Power input 2 K from the coolant temperature.
PV Power loss Example: S 3 – 10 %
Temperature Example: S 2 – 60 min (Stated percentage refers to on period)
max Highest temperature (The stated time refers to 60 minutes of
tB Load period operation at normal rating)
tr Relative on period (as percentage)
tS Duration
tSt Standstill period
Power input Power input Power input
Power loss Power loss Power loss
Temperature Temperature Temperature
t
tr = t +B t · 100 %
B St
Symbols
Permanent- Varistor disk

Varistor
(magnet) M (voltage-dependent resistor)
excited
D.C. motor Resistance
M
Thermoswitch
Interference-
suppression Bridge rectifier
component
Throttle
Limit shutoff
Interference-
suppression
component
Capacitor

Characteristic curves
With a specified working point of 160 Ncm
one plots a vertical line to the torque axis. The
intersecting points of these vertical lines with the
various characteristic curves result in the operat-
ing data for the rated speed nN, rated current IN
and mechanical output P2N.
Explanation of characteristic curve evaluation

AP Working point
M Torque
P2 Power input
I Current
n Rotational speed
Example:
Given: MN = 160 Ncm.
Found: nN = 3,800 min–1.
P2N = 600 W and IN = 35 A.
-Identification and manufacturer declaration in accordance with EU directive

As under the EU Directive all electrically- 2. Low-voltage Directive The limits for the relaying and the radiation
powered machines, devices and systems, which It is valid and is to be applied for all electric of high-frequency interference are specified in
are manufactured, imported and sold within motors as from a low-voltage limit of 75 V for EN 55 014 of the EMC Act.
the borders of the European Union must have D.C. voltage and 50 V for A.C. voltage and higher. Because of the previously-mentioned reasons,
a CE-label attached to them. Because the electric motors listed in this Bosch electric motors are on no account subject
The EU Directive also includes the following catalogue are designed for rated voltages of to mandatory CE labeling.
individual guidelines, which are of significance up to maximum 24 V, they are not governed
for motor users. by this Directive. We will gladly assist you with information in
all matters relating to the acceptance of your
1. Machine Directive 3. EMC Directive application.
It is valid for self-contained operational machines This Directive is valid for all electrical and
or any interlinking of machines to form integral electronic devices, installations and systems.
systems. However, this Directive is also valid for com-
It is not valid for machine components however, plex components such as, e.g. electric motors,
such as, for example, electrical control systems although this only applies where they are openly
or electric motors which have no independent available for purchase by the public. The electric
function. motors listed in this catalogue are solely shipped
The entire machine or system must always as supplied parts or replacement parts, and
comply with the Directive. are not subject to § 5 paragraph 5 of the
EMC Act regarding a mandatory CE label.

Motors with Hall sensor
Hall effect
Hall effect. Circuit. Characteristic curves.
d Thickness of chip.
Induction
B
+
+
1k
+
+
+
+
+
d
-
UV 0 t
-
-
-
-
-
IS - R
Output voltage
UH UA
UA
0 t
If a current IS flows through a chip, a Hall voltage

UH is generated transverse to the direction of
the current, the size of which is proportional to
the magnetic induction B (vertical to IS) and the
current IS. The Hall voltage UH is made up of:
IS · B
UH = RH ·
d
RH Hall-constant factor
Hall sensor IC
Since the resulting Hall voltages are extremely

small, they are amplified. When using silicon
Hall elements, the circuit for signal processing
(e.g. a Schmitt trigger with subsequent driver)
are integrated directly onto the same chip. This
component is then designated a Hall-IC. The
output is a transistor with open collector, with
which a switching function is realized.
Permanently connected to the armature shaft

is a magnetic ring, the magnetic field of which
permeates the Hall element. When the armature
shaft rotates, the magnetomotive-force direction
in the Hall element changes. The output
transistor is then either switched through or
open.

Hall-effect applications in D.C. motors

Basic arrangement in motor with Output signals, 1 armature rotation.
By counting the generated output-voltage pulses,
2-pole ring magnet.
one can determine the number of rotations
and thus the speed. If the rotational motion is
converted into a linear motion, it then becomes
possible to monitor the adjustment travel exactly.
H1 UA1
If there are two Hall generators installed offset to N
each other at a specific angle Â in a motor, then
the direction of rotation can also be determined.

UA2
S H2
0 α 360
Basic arrangement in motor with Output signals, 1 armature rotation.

8-pole ring magnet.

UA1
H1
S N

UA2
H2
0 α 360
360 + α
Basic arrangement in motor Output signals
H1, H2 Hall generator UA1 Output voltage of first

N North pole Hall generator
S South pole UA2 Output voltage of second
Â Angle between the two Hall generator
Hall generators Â Angle between the two
Hall generators
Ç Rotational angle

10 | D.C. motors without transmission
D.C. motors without transmission
Product features
• Wide range of permanent-magnet

D.C. motor products
• D.C. voltage range from 12 to 24 Volt
• Speed range from 1,750 to 9,500 min–1
• Available with and without Hall elements
Advantages for your application
• Robust and reliable quality,

well-proven in many millions of motor vehicles
• High reliability and service life
• A multitude of different sizes and designs
for greater flexibility
• Favorable price/performance ratio
The Bosch D.C. motors without transmission referred to here are Application examples
permanent-magnet D.C. motors developed for use in motor vehicles.
They excel on account of an excellent power/weight ratio, and a broad Automotive technology:
working range in different requirements and installation situations. Heater and air-conditioning blowers, engine cooling, power-seat
adjustment
Bosch electric motors without transmission are typically used in motor
vehicles as a motor for heater or air-conditioning devices or for power-seat Industrial applications:
adjustment. The installation position can vary arbitrarily from horizontal to Electric mopeds, sweeping machines, hospital wheelchairs, adjustable
vertical. Bosch electric motors without transmission, are also the suitable office desks, window adjustment, hoisting winches and lots more.
solution for many applications outside the automobile.

D.C. motors without transmission | 11
APG
12 V 20 W P2 I n
Up = 12 V
Part number 0 130 002 211 W A min-1
Nominal voltage 5 12 V
Nominal power p 20 W
60 15 15000
Nominal current Á 2,8 A I
Nominal speed á 9500 minÉ P2
Nominal torque À 2 Ncm

Breakaway torque à 20 Ncm 40 10 10000
n
Direction of rotation R
Type of duty S1
Degree of protection IP 54 AB) 20 5 5000
Weight approx. 0,30 kg
B) Bearings excluded
0 0 0
M 0 5 10 15 Ncm
ø5
ø 22,5
ø 24,5
ø 14
ø 40
N
2,6 4,5
800
6,6 28,6
101,6
5
N Cap supplied separately (part number 3 130 508 003)
APG
24 V 20 W P2 I n
Up = 24 V
Nominal power p 20 W 8
60 15000
6
Breakaway torque à 20 Ncm 40 10000
n
Direction of rotation R 4
Type of duty S1
Degree of protection IP 54 AB) 20 5000
Weight approx. 0,30 kg 2
B) Bearings excluded
0 0 0
M 0 5 10 15 Ncm
101,6
6,6 28,6
N
2,6 4,5
5
24,5
40
14
46,5
300
320
N Cap supplied separately (part number 3 130 508 003)

S Round plug, Kostal (part number 1 02 24 32944 0)

API
12 V 28 W I n
UP = 13 V
Part number 0 130 002 525 A min–1
Nominal power p 28 W Imax
15 6000
Nominal current Á 7,0 A
Nominal speed á 3100 minÉ
Direction of rotation L/R n
Type of duty S 3 - 15 %
Degree of protection IP 50 A
5 2000
II Weight approx. 0,44 kg
Clockwise: I to term (+), II to term (–)
M Counterclockwise: I to term (–), II to term (+)
0 0
0 10 20 30 Ncm
I
M
16
3,5
45°
.
ax
m
ø11,2
,5
13
ø24 max.
46°
17,5
m x.
1,5
a
ø3 2 m
.
in
15,9
ø3
ø3,4 max.
7
3,2 110
API
with Hall sensor 12 V 28 W I n
UP = 13 V
Nominal power p 28 W Imax
+ –
15 6000
IV III II I Nominal current Á 7,0 A
U
N M
S
Direction of rotation L/R n
R Degree of protection IP 50 A
5 2000
U U Counterclockwise: I to term (–), II to term (+)
R
0 0
0 10 20 30 Ncm
M
16
3,5
45°
.
ax
m
ø11,2
,5
13
ø24 max.
46°
17,5
m x.
1,5
7
a
ø3 2 m
.
in
15,9
ø3
ø3,4 max.
3,2 110

API
12 V 46 W I n
UP = 13 V
Nominal voltage 5 12 V Imax
Nominal power p 46 W 20 4000
n
Nominal torque À 15 Ncm 15 3000
Breakaway torque à 63 Ncm

Direction of rotation L/R
10 2000
Degree of protection IP 50
II Weight approx. 0,44 kg 5 1000
0 0
0 20 40 60 Ncm
I
M
20
3,5
47°
ø11,2
20
ø24 max.
°
ø42
14,5
in .
ax
7
ø3 2 m
.
ø3,4 max.
m
ø3
15,9
7
3,2 134
API
with Hall sensor 12 V 46 W I n
UP = 13 V
Nominal voltage 5 12 V Imax
+ – Nominal power p 46 W 20 4000
IV III II I Nominal current Á 9,0 A
n
U
N M
S
10 2000
R Degree of protection IP 50
Weight approx. 0,44 kg 5 1000
R
0 0
0 20 40 60 Ncm
M
20
3,5
47°
ø11,2
20
ø24 max.
°
ø42
14,5
in .
ax
7
ø3 2 m
.
ø3,4 max.
m
ø3
15,9
7
3,2 134

API
24 V 25 W P2 I n
UP = 24 V
Part number 0 130 002 562 mW A min–1 P2
Nominal power p 25 W 24 8 4000
n
I
Nominal torque À 8 Ncm 18 6 3000

Direction of rotation L/R 12 4 2000
rt Weight approx. 0,50 kg 6 2 1000
Clockwise:
M
U red (rt) to term (+), brown (br) to term (–)
Counterclockwise:
0 0 0
red (rt) to term (–),brown (br) to term (+) 0 5 10 15 20 25 Ncm
br M
14 25
x )
(4
ø 3,4
4
0,
R
ø 20
ø 30
ø 42
3,2
23
R
20 S
114
S Blade terminal 6.3 mm, Tyco number 280 081-1, plug housing Tyco number 180 908-0
API
24 V 46 W B)
I n
Part number 0 130 002 671 UP = 26 V
A min–1
Nominal voltage 5 24 V n I
12 3000
4 1000
I Weight approx. 0,44 kg
B) On request
M Clockwise: I to term (+) II to term (-)
Counterclockwise: I to (-) II to (+)
0 0
II 0 20 40 60 Ncm
M
20
3,5
47°
ø11,2
20
ø24 max.
°
ø42
14,5
in .
ax
7
ø3 2 m
.
ø3,4 max.
m
ø3
15,9
7
3,2 134

API
with Hall sensor 24 V 46 W B)
I n
UP = 26 V
Nominal current Á 4,5 A 12 3000

4 1000
B) On request
U U Clockwise: I to term (+) II to term (-)
R Counterclockwise: I to term (-) II to term (+)
0 0
0 20 40 60 Ncm
M
20
3,5
47°
ø11,2
20
ø24 max.
°
ø42
14,5
in .
ax
7
ø3 2 m
.
ø3,4 max.
m
ø3
15,9
7
3,2 134
API
with Hall sensor 12 V 34.5 W I n
UP = 13 V
Nominal voltage 5 12 V I
Nominal power p 34,5 W 20 4000
Nominal speed á 3360 minÉ n

10 2000
R
0 0
0 10 20 30 40 50 Ncm
M
18,25 15,35 109,5

13 15,5 32
ø6 7 24,5 7
9,5
4,
5
ø23,45
ø 11,2
ø9
52,15
ø 42
36
ø 5,5
6,4
20
I IV
II III

API
12 V 34.5 W I n
UP = 13 V

10 2000
I Weight approx. 0,45 kg 5 1000
0 0
0 10 20 30 40 50 Ncm
II
M
18,25 15,35 109,5

13 15,5 32
ø6 7 24,5 7
9,5
4,
4
ø 23,45
ø 11,2
ø9
52,15
ø 42
36
ø 5,5
6,4
20
I
II
API
with Hall sensor 12 V 36.4 W
P2 I n
Part number 0 130 002 634 W A min–1
UP = 12 V
Nominal voltage 5 12 V P2 I
Nominal power p 36,4 W 64 20 4000
Nominal current Á 6,3 A n


Type of duty S 3 - 15 % 32 10 2000
Weight approx. 0,53 kg 16 5 1000
R
0 0 0
0 20 40 60 Ncm
M
18,25 15,35 119,5

13 15,5 32
ø6 7 24,5 7
9,5
4,
4
ø 23,45
ø 11,2
ø9
52,15
ø 42
36
ø 5,5
6,5
20
I IV
II III

API
12 V 29.2 W
I n
UP = 13 V
Nominal current Á 5,8 A n I

10 2000
5 1000
0 0
0 20 40 60 Ncm
II
M
18,25 15,35 129,5

13 15,5 32
ø6 7 24,5 7
9,5
4,
4
ø23,45
ø 11,2
ø9
52,15
ø 42
36
°
37
ø 5,5
6,5
20
I
60° II
API
with Hall sensor 12 V 29.2 W
I n
UP = 13 V

10 2000
5 1000
Clockwise: I to term (+) II to term (-)
U U Counterclockwise: I to term (-) II to term (+)
R
0 0
0 20 40 60 Ncm
M
18,25 15,35 129,5

13 15,5 32
ø6 7 24,5 7
9,5
4,
4
ø23,45
ø 11,2
ø9
52,15
ø 42
36
°
37
ø 5,5
6,5
20
I IV
60° II III

API
with Hall sensor 24 V 29.2 W B)
I n
UP = 26 V
Nominal power p 29,2 W n I

4 1000
B) On request
U U Clockwise: I to term (+) II to term (-)
R Counterclockwise: I to term (-) II to term (+)
0 0
0 20 40 60 Ncm
M
18,25 15,35 129,5

13 15,5 32
ø6 7 24,5 7
9,5
4,
4
ø23,45
ø 11,2
ø9
52,15
ø 42
36
°
37
ø 5,5
6,5
20
I IV
60° II III
API
24 V 29.2 W B)
I n
UP = 26 V
Nominal power p 29,2 W n I

4 1000
B) On request
M Clockwise: I to term (+) II to term (-)
Counterclockwise: I to term (-) II to term (+)
0 0
0 20 40 60 Ncm
II
M
18,25 15,35 129,5

13 15,5 32
ø6 7 24,5 7
9,5
4,
4
ø23,45
ø 11,2
ø9
52,15
ø 42
36
°
37
ø 5,5
6,5
20
I
60° II

BPA
12 V 34 W P2 I n
Up = 12 V
Nominal voltage 5 12 V P2
60 30 6000
I
Type of duty S1
Degree of protection IP 10 20 10 2000
0 0 0
M 0 10 20 30 Ncm
35,2 A B
26,8 ~ 2,8
26
ø6
M
ø 51
ø 39
M4
72
99,2 45°
103,5
A (–) Receptacle for blade terminal 6.3 x 0.8

B (+) Blade terminal 6.3 x 0.8
BPA
24 V 25 W
Part number 0 130 007 051
Type of duty S1
107 A B
ø6
35,2
45
51
48
72


BPA
12 V 14 W P2 I n
Up = 12 V
30 15 3000
P2

Nominal torque À 4,6 Ncm
I
Direction of rotation L
Type of duty S1
0 0 0
M 0 10 20 30 Ncm
150 M4
26
ø6
S M
ø 11
ø 39
51
26,7 35,2 2,8
72 27,3
107 45°
(+) (-)
S Round plug a 2.5 mm.

Connections: (+) green, (–) black.
BPA
12 V 28 W
Type of duty S1
107 A B
ø6
35,2
45
51
48
72


CPB
12 V 24 W
P I n
Part number F 006 B10 148 W –
UP = V
Nominal voltage 5 12 V 60 60 3000

n
Nominal speed á 2950 minÉ 50 50 500
Nominal torque À 7 Ncm P

Type of duty S1 30 30 500
I
0 0 500
0 0 0
0 0 0 30 40 50 Nc
M
21,7 39,1
ø8
ø59
30,8 51,5
129,5
CPB
12 V 99 W
P2 I n
UP = 13 V
P2
Nominal current Á 13,0 A 150 60 6000
Nominal speed á 3800 minÉ n I

Type of duty S1
M 0 0 0
0 25 50 75 100 Ncm
M
145
37,4 62,2 4,5 59
30,8 19 16,7
19,2
27
30,6
7,2
ø8
27
3
3,
26
45°
51,5 45
107,6 90°
30

CPB
12 V 86 W P2 I n
UP =13V
Nominal power p 86 W P2

I
Nominal torque À 25 Ncm n
Type of duty S1
50 20 2000
M 0 0 0
0 40 80 120 Ncm
M
137
93,4 4,5
A B
47,5
ø8
M
4
M
2x
37,4 51,5 11,1 37 59

CPB
12 V 75 W
Type of duty S1

R Clockwise

CPB
12 V 84 W
P2 I n
UP = 13 V
P2 I

Type of duty S1
M
0 0 0
0 25 50 75 100 Ncm
M
133,5
93,4 4,5
19,2
ø8
47,5
30,5
3
3,
45°
33,5 90°
51,5 11,1 30
96,1 59
CPB
24 V 44 W P2 I n
Up = 26 V
n
15 3000
60
Type of duty S1
Degree of protection IP 10 5 1000
0 0 0
M 0 20 40 60 80 Ncm
93,4 4,5
11,1 A B
ø8
M
ø 47,5
51,5 33,5
133,5 59


CPB
24 V 36 W P2 I n
UP = 24 V
Part number F 006 MG0 30B W A min–1
n P2
50 2500
Nominal speed á 2300 minÉ 40 2000

Type of duty S1
20 1000
– + Weight approx. 0,67 kg
10 500
I
M 0 0
0 20 40 60 80 Ncm
M
93,4
45
30 165
4
3,
ø3,85
30,5
34,5
47,5
ø 22
M5
5,6 2,5 5,7
20 20 56,8 30
51,5 11,1 59
CPB
24 V 57 W P2 I n
Up = 24 V
W A min-1
P2
I
Nominal torque À 15 Ncm n

Type of duty S1
M
0 0 0
0 25 50 75 100 Ncm
93,4 51,5
30 19
A B
ø22
30,5
34,5
47,5
3,
ø 6,4
M5
ø6
5,6 2,5
45°
11,1 30
20° 20°
51,5 59


CPB
24 V 67 W P2 I n
Up = 28 V
150 30 6000

Type of duty S1
0 0 0
M 0 25 50 75 100 Ncm
93,4 4,5
11,1 A B
ø8
M
ø 47,5
51,5 33,5
133,5 59

CPB
24 V 75 W
Type of duty S1

R Clockwise

CPR
12 V 102 W I n
UP = V
Part number 0 130 063 604 W –
n

Nominal speed á 3500 minÉ P
I

00 0 000
Type of duty S1
+ – Weight approx. 0,75 kg 0 0 000
M 0 0 0
0 0 7 00 Nc
M
3
100
144
93,3 5,3
45
10
ø8
59,6
62 44 70
107 68
CPR
24 V 123 W
P2 I n
UP = 26 V
I
Nominal current Á 7,5 A P2

Nominal torque À 27,5 Ncm 240 30 6000
Breakaway torque à 188 Ncm n
– + Degree of protection IP 10
M 0 0 0
0 55 110 165 Ncm
M
215
101,3 5,3
4,5 18,7 92
8
ø60,2
30,5
3
3,
45°
70 58
86,4 128,6 90°
30

DPD
12 V 80 W P2 I n
Up = 13 V
n P2
150 60 3000

Type of duty S1
0 0 0
M 0 50 100 150 Ncm
223
4,9 112,2 4,9 20°
15,5
A B
ø8
ø8
40
M
ø 44
70,2 56 73
A Receptacle for blade terminal 6.3 x 0.8

B Blade terminal 6.3 x 0.8
DPD
12 V 120 W P2 I n
Up = 13 V
300 6000
Nominal current Á 15,0 A P2 I
Nominal torque À 25 Ncm 60
Direction of rotation L 40
Type of duty S1
0 0 0
M 0 50 100 150 Ncm
148 73
100 4,9 20°
15,5
A B
ø8
M
ø 44
40
M4
2x
58 41


DPD
12 V 120 W P2 I n
Up = 13 V
300 6000
Nominal torque À 25 Ncm 60
Type of duty S1
0 0 0
M 0 50 100 150 Ncm
148 73
100 4,9 20°
15,5
A B
ø8
M
ø 44
40
M4
2x
58 41

DPD
12 V 140 W P2 I n
Up = 12 V
300 150 6000
I
Type of duty S1
– + Degree of protection IP 10 100 50 2000
0 0 0
M 0 50 100 150 Ncm
168
4,9 100 4,9 20°
15,5
A B
ø8
ø8
40
M
ø 44
58 33 73

DPD
12 V 150 W
P2 I n
UP = 12 V
Nominal voltage 5 12 V n
P2

M 0 0 0
0 40 80 120 160 Ncm
M
148 73
15 4,9 43
20°
8
22°
22°
44
8
45°
40
M4
58 41 10
15,5
DPD
12 V 160 W
P2 I n
Part number 0 130 111 136 W A min–1 P2
UP = 12 V
I

M 0 0 0
0 40 80 120 160 Ncm
M
215 73
4,9 100 4,9 43
15 20°
8
22°
8
22°
44
11
15°
5°
45°
40
21,5
58 62 10
15,5 92

DPD
24 V 100 W
Type of duty S1
F Blade terminal 6.3–2.5; blade terminal housing Tyco No. 280 081– 2.
DPD
24 V 104 W P2 I n
Up = 26 V
300 60 6000
Nominal speed á 4950 minÉ n P2
I
Type of duty S1
0 0 0
M 0 50 100 150 Ncm
4,9 100 4,9 20°

15,5
A B
ø8
ø8
40
M
ø 44
11
5°
58 62 73
215 92


DPD
24 V 170 W P2 I n
Up = 26 V
600 60 6000
I
Nominal torque À 30 Ncm P2
Type of duty S1
0 0 0
M 0 100 200 300 Ncm
4,9 112,2 4,9 20°

15,5
A B
ø8
ø8
40
M
ø 44
11
5°
70,2 52 73
215 92


DPB
24 V 32 W
Type of duty S1
Connections: (+) red), (–) black.
DPB
24 V 50 W P2 I n
Up = 24 V
P2
300 60 6000
I
Type of duty S1
0 0 0
0 50 100 150 Ncm
E (–) Blade receptacle B 6.3-2.5 DIN 46 247 (brown).

F (+) Blade terminal B 6.3-2.5 DIN 46 248 (black).
T a4.4 for Tapite M5.

DPB
24 V 73 W P2 I n
Up = 24 V
Nominal power p 73 W I
300 30 6000
Nominal torque À 17,5 Ncm
n
Type of duty S1
+sw -br Degree of protection IP 54 A 100 10 2000
0 0 0
0 50 100 150 200 Ncm
175,5
51,3 1,3
30°
0°
12
ø40
12
0°
ø5,6
ø7,6
147°
M4
ø 40
ø 76
M
7,5
1,6 2,6 3 ø6
30
10 20
4
220
34
A B
A (–) Blade terminal 6.3-2.5 DIN 46 343 (brown).

B (+) Blade terminal 6.3-2.5 DIN 46 343 (black).
DPB
24 V 100 W
Type of duty S1
Connections: (+) black, (–) brown.

DPG
24 V 59 W P2 I n
Up = 26 V
150 30 3000

I
Type of duty S1
0 0 0
M 0 50 100 150 Ncm
+
A
- 300
29,1
23,7
4,5
2,6
M
ø75,8
ø7,3
ø68
ø8
9 7
83 14,5
138
A Blade terminal 6.3-2.5 DIN 46 343 – Bz.

DPL
12 V 115 W P2 I n
Up = 12 V
300 150 6000

Direction of rotation R I
Type of duty S1
2– 1+ Degree of protection IP 10 100 50 2000
0 0 0
M 0 50 100 150 200 Ncm
140
3,3
43
ø8
ø8
ø 33,7
ø 73
80,6 7,5
40
104,9 20°
139
177
S Socket housing Tyco No. 1-828 816-1 with round plug receptacle Tyco No. 927 788-2
DPL
12 V 119 W P2 I n
UP =13V
P2


140 50 2000
Type of duty S1
2– 1+ Degree of protection IP 10
0 0 0
M 0 70 140 210 Ncm
M
S
7,5
191
6
43,1
ø33,7
3,3
43
ø8
M
ø62,2
ø22
ø73
92,8 20°
96,7 40°
117,1
162,2
169
S Socket housing Yazaki 7283-5590-40, blade receptacle Yazaki 7116-4122-02.

DPL
12 V 141 W P2 I n
Up = 13 V
600 150 6000
n
Nominal torque À 30 Ncm P2
I
Type of duty S1
2– 1+ Degree of protection IP 10 200 50 2000
0 0 0
M 0 100 200 300 Ncm
30,7
28,9
20,1
3,3
55
ø8
M
ø 33,7
ø 73
7,5
40
92,8
117,1 20°
153,2
160,2
DPL
12 V 138 W
P2 I n
UP = 13 V
n I

P2

M 0 0 0
0 50 100 150 200 Ncm
M
35,6 61,8
30,7 43,1
20,1 28,9
4,9
ø33,7
55
ø8
ø62,2
23,9
ø22
ø73
13,6
40
8 (4x) 80,6 7,5

104,9 20°
153 + –
40°
160

DPL
12 V 131 W
P2 I n
UP = 12 V

I
Type of duty S1
– + Degree of protection IP 10
M 0 0 0
0 50 100 150 200 Ncm
M
35,6
30,7 43,1
20,1 28,9
4,9
ø33,7
55
ø8
ø62,2
23,9
ø22
ø73
13,6
40
8 (4x) 80,6 7,5
104,9 20°
137 + –
40°
144
DPL
12 V 138 W
P2 I n
UP = 13 V
n P2 I

Type of duty S1
100 50 2000
50 25 1000
M 0 0 0
0 50 100 150 200 Ncm
M
139
35,6 43,1 40,35 18
20 24
118
4,9
ø33,7
ø22
43
ø8
ø62,2
23,9
ø73
13,6
40
8 (4x) 80,6 7,5

104,9 +
20°
140,55 –
40°
180,5

GPB
24 V 175 W
Part number F 006 KM0 60F
Nominal voltage 5 24 V P I n
–
UP = V
W P

Breakaway torque à 480 Ncm I
80 8 00
Type of duty S1
n
+ –
Clockwise: I to (+) II to (-) 90 00
Counterclockwise: I to (-) II to (+)
0 0 0
0 00 00 00 00 Nc
M
ø110,8
12
0 21,2
X
23
X
85,8
GPB
12 V 84 W P2 I n
Up = 12 V
150 60 3000

I
Type of duty S1
0 0 0
M 0 50 100 150 Ncm
275
120
°
40° 61
A
15
5
127
M
ø 110,7
ø 106
ø 102
2
1,5
ø7,7
0°
12
ø7,6
ø6
ø 7,7
69,05 2
20
ø8
8 5,5
A Connections: Yazaki 7114-2872

GPB
12 V 99 W P2 I n
Up = 12 V
150 60 3000

Nominal torque À 35 Ncm I
Type of duty S1
0 0 0
M 0 50 100 150 200 Ncm
77,7
41,2
ø3
0°
12
12
0°
ø 6,2
R 77,5
ø8
ø 110,8
ø 4,35
69
R
515
- +
GPB
12 V 146 W P2 I n
UP = 13 V
Part number 0 130 303 015 W A min-1 P2

180 60 3000
Type of duty S1
+ + – Degree of protection IP 03 60 20 1000
0 0 0
M 0 50 100 150 200 Ncm
M
77,2 max
61,4
23,1
39,75 71 14,95
°
2
7,
80
110,8
101,8
105,8
0°
55
12
ø1
1
2
20 3 31,6

GPB
12 V 147 W P2 I n
Up = 13 V
P2
300 75 3000

Type of duty S1
0 0 0
0 100 200 300 Ncm
4,5
2,6
M6
60 20
ø8
°
120
12
ø110,8
ø 138
ø155 M
ø101,8
4
5°
-
20 9,3 25
+ 86
A For counterpart from Kabelwerk Reinshagen No. AK 15 444
GPB
12 V 181 W P2 I n
Up = 12 V
600 150 3000
Nominal torque À 50 Ncm P2 I
Type of duty S1
0 0 0
M 0 100 200 300 400 Ncm
M
ø158
4,5
2,6 60 18
M6
ø8
12
ø110,8
20
M
ø120
ø101,8
4
- +
ø1
18 9,3
33
260 86
15°
A Blade terminal housing VW No. 357 972 782, blade terminal EF 4.8-4 N101573.

GPA
12 V 400 W
Nominal torque À 1,2 Nm
Breakaway torque à 6,4 Nm
Type of duty S1
15° 10
0°
12
M6
12
M
0°
M
12g7
108
M 8x1
0
10
9
22,3
158
160
A Blade receptacle 9.6 x 6 DIN 46 247.

M When mounting, clamp ball-bearing inner ring with ring (part number 3 130 202 004, not in scope of delivery).
GPA
12 V 400 W
Type of duty S1
18
0°
12
M6
12
0°
M
M 12 links
70
108
12
M
0
10
22,3
129,3
163
185
220
G
K
G (+) for blade terminal 9.5 x 1.2 (red).

K (–) cable lug A4 x 3.4 DIN 46 225 (brown).

GPA
12 V 630 W
Nominal torque À 2 Nm
Breakaway torque à 9 Nm
Type of duty S1
15° 18
0°
12
M6
12
M
0°
5
M
M 12 links
108
10
12
0
10
22,3
140,3
185
185
220
G
K
G (+) for blade terminal 9.5 x 1.2 (red).

K (–) cable lug A4 x 3.4 DIN 46 225 (brown).
GPA
24 V 255 W
Type of duty S1
Connections: (+) red, (–) black.
128
18
7,5
M
7,2
8g7
108
14
0
6
280
29,3
F
165
F Blade terminal housing Tyco No. 180 908.

GPA
24 V 650 W
Type of duty S1
2,5
188,5 max
140,3 35 70
4
15° 10
0°
11
12
11
0°
0°
M6 M12
°
100
31
108
12
18
30
19
M
17
120°
110,5
GPA
24 V 750 W
P2 I n
Up = 24 V

P2
Breakaway torque à 11 Nm 1000 100 4000
Type of duty S1
n
0 0 0
0 2,5 5 7,5 10 Nm
140,3
14,5 10
0°
12
M6
12
M
0°
M6
M
70
108
M 12
12
45°
0
10
35
188,5
230
310
K
L
L (+) Cable lug A8 x 3.4 DIN 46 225 (red).

K (–) Cable lug B4 x 3.4 DIN 46 225 (black).

GPA
24 V 750 W
P2 I n
Up = 24 V

P2
Type of duty S1
n
0 0 0
0 2,5 5 7,5 10 Nm
15° 14,5 18
0°
12
M6
12
0°
M6
M
70
M
108
M 12
12
45°
0
10
35
140,3
0
23
188,5
310
K J
J (+) Cable lug A8 x 3.4 DIN 46 225 (red).

K (–) Cable lug B4 x 3.4 DIN 46 225 (brown).
GPA
24 V 750 W
P2 I n
Up = 24 V

P2

Type of duty S1
n
I = red, II = black.
Clockwise: (–) to I, (+) to II.
Counterclockwise: (+) to I, (–) to II. 0 0 0
0 2,5 5 7,5 10 Nm
188,5 max
140,3 35
15° 12
10
0°
11
0°
12
0°
11
M
12
0°
M6
ca. 57
SW10
4 mind.
11,5
108
11
16
12
17
110,5
310
0
23
12
8
M When mounting, clamp ball-bearing inner ring with ring (part number 3 130 202 004, not in scope of delivery

Inverse speed motor

Grounded frame 12 V 1.2 kW
Part number F 000 MM0 618
Nominal voltage 5 12 V S3
%
S2
min
P2
kW A
I n
min-1
U
V
UP = 12 V

30 15 3 540 7500 18
Nominal current Á 195 A
Nominal speed á 2100 minÉ 24 12 2,4 450 6000 12
Breakaway torque à 24 Nm 18 9 1,8 360 4500 9
Direction of rotation L/R U

Type of duty S 2 - 6 min 12 6 1,2 270 3000 6
A F2 F1
Degree of protection IP 44 S3
Weight approx. 7,00 kg 6 3 0,6 180 1500 3

S2 P2
n
M 0 0 0 0 0 0
0 5 10 15 20 Nm
M
232,3
163,2 15° 15°
42,5 109,0
M8 x 1,25
Terminal
40
114
Inverse speed motor

Grounded frame 24 V 1.7 kW
%
S2
min
P2
kW A
I n
min-1
U
V
UP = 24 V
I
Nominal current Á 110 A 24 9,6 2,4 432 6000 24
P2
Nominal torque À 5,4 Nm 18 7,2 1,8 324 4500 18
Breakaway torque à 24 Nm U
Direction of rotation L/R 12 4,8 1,2 216 3000 12
Type of duty S 2 - 7 min

A F2 F1
6 2,4 0,6 108 1500 6
S3
S2 n
M 0 0 0 0 0 0
0 10 20 30 40 Nm
M
240,3
171,5 15° 15°
42,5 117,0
M8 x 1,25
Terminal
40
114

Inverse speed motor

Grounded frame with flange 12 V 1.2 kW
%
S2
min
P2
kW A
I n
min-1
U
V
UP = 12 V

30 15 3 540 7500 18
Nominal speed á 2100 minÉ 24 12 2,4 450 6000 12
Breakaway torque à 24 Nm 18 9 1,8 360 4500 9
Direction of rotation L/R U

Type of duty S 2 - 6 min 12 6 1,2 270 3000 6
A F2 F1
Degree of protection IP 44 S3
Weight approx. 7,00 kg 6 3 0,6 180 1500 3

S2 P2
n
M 0 0 0 0 0 0
0 5 10 15 20 Nm
M
1 widht across flats 237,1

/2
178
5
/16 – 24 UNF – 2B 173,4
90°
45
° 23,2
15° 15°
44,5
22,2
Ma
de in Braz 95,2
il
24,5
Ø101,6 114
4,8 3 – 24 UNF – 3
/8
89,4
Inverse speed motor

Grounded frame with flange 24 V 1.7 kW
%
S2
min
P2
kW A
I n
min-1
U
V
UP = 24 V
Nominal power p 1700 W n

U
Nominal current Á 110 A 48 12 4,8 324 6000 24
I
Nominal torque À 5,4 Nm 36 9 3,6 243 4500 18
P2
Direction of rotation L/R 24 6 2,4 162 3000 12

A F2 F1
12 3 1,2 81 1500 6
Weight approx. 7,00 kg S2
S3
0 0 0 0 0 0
M 0 5 10 15 20 25 Nm
M
1 widht across flats 237,1

/2
178
5
/16 – 24 UNF – 2B 173,4
90°
45
° 23,2
15° 15°
44,5
22,2
Ma
de in Braz 95,2
il
24,5
114
Ø101,6
4,8 3 – 24 UNF – 3
/8
89,4

Inverse speed motor

12 V 1.6 kW
%
S2
min kW
P2 I
A
n
min-1
U
V
UP = 12 V

U
Nominal current Á 220 A 30 12 4 480 6000 12
I

Nominal torque À 5,1 Nm 22,5 9 3 360 4500 9
Direction of rotation L/R P2
Type of duty S 2 - 2,8 min 15 6 2 240 3000 6
Weight approx. 7,50 kg n
7,5 3 1 120 1500 3
S3
S2
0 0 0 0 0 0
0 3 6 9 12 15 Nm
M
181,9
28° 28° 152,4
10,6
87
ø24,8
ø114
90,5 11,2
Inverse speed motor

24 V 2.38 kW
%
S2
min
P2
kW A
I n
min-1
U
V
UP = 24 V
Nominal power p 2380 W P2 I

Nominal torque À 7 Nm 18 7,2 1,8 360 4500 18
S3
U

Type of duty S 2 - 4 min 12 4,8 1,2 240 3000 12
6 2,4 0,6 120 1500 6
S2
n
0 0 0 0 0 0
0 10 20 30 40 Nm
M
181,9
28° 28° 152,4
10,6
87
ø24,8
ø114
90,5 11,2

Permanent-magnet motor
without flange 12 V 0.9 kW
%
S2
min
P2
kW A
I n
min-1
U
V
UP = 12 V

Nominal torque À 2,66 Nm 18 7,2 1,8 270 4500 9
U
Direction of rotation L/R 12 4,8 1,2 180 3000 6
Type of duty S 2 - 2,4 min

Degree of protection IP 00 P2
6 2,4 0,6 90 1500 3

Weight approx. 2,10 kg n
S3
S2
0 0 0 0 0 0
0 2 4 6 8 Nm
M
67 108 23,2
12
8,6
ø78,5
ø32
9,5
13,2

Notes | 49

50 | D.C. motors with transmission
D.C. motors with transmission
Product features
• Wide range of permanently-excited

motor-and-gear assemblies
• D.C. voltage range from 12 to 24 Volt
• Available with and without self-locking
feature
• Breakaway torques from 1 Nm to 70 Nm
• Speed range from 16 to 700 min–1
• Available with and without Hall elements
• A multitude of different sizes

and designs for greater flexibility
• Robust and reliable quality, well-proven
millions of times over in automobiles
• High reliability
Bosch electric motors with transmission provide fitting solutions for almost Application examples
every application. They provide a wide range of performance and are highly
versatile in their application. The new generation of Bosch adjustment Automotive technology:
motors have a compact design and have been optimized in terms of Flap positioning for climate control, air proportioning and distribution,
installation space and weight. In addition to this, they are exceptionally wiper motors, power-window motors, seat-adjustment motors,
quiet and highly robust. adjustment motors
The desired speed can easily be regulated by changing the voltage. The
direction of rotation can be inverted by changing over +/–. Maximum torque Industrial applications:
is available during the startup phase. Control motors, garage-door drives, locking systems, medical technology
etc.

D.C. motors with transmission | 51
The VMC flap actuators generation from Bosch
• Compact and space-saving adjuster drive

• Robust and reliable quality, well-proven
millions of times over in automobiles
As comfort requirements on air conditioners increase and the resulting In many applications outside the automobile too, exact flap and valve
number of air flaps also increase, the number of air-flap actuators also rises. positioning is required. This is why Bosch VMC motors are ideal for your
Modern vehicles are equipped with 4–16 air-flap actuators. concept.
Technology Application examples

The flap actuator consists of a permanently-excited D.C. motor and a trans- The VMC air-flap positioner is used for positioning flaps during climate
mission. The mechanical angle of rotation can be limited by means of control in automobiles. It is also ideally suited for industrial applications
stops attached to the housing. The electrical connector is designed for such as valve positioning for water, oil, gas or for instance, for propor-
the AMP Micro Quadlock system. tioning air quantities in solariums.
Bring your idea and application along to us. Together we will get your
VMC modular system with: project moving – with electric motors from Bosch.
• Standard on/off switching
• Integrated potentiometer
• Automatic limit stop
• Output consumption for different positioning elements
VMC with potentiometer

VMC
with potentiometer 24 V 0.22 W P2 I n
Up = 26 V
W mA min-1
Part number 0 132 801 141 0,40 160
Nominal power p 0,22 W 8

n
Nominal current Á ) 55 mA 0,30 120 P2
Maximum current Â 250 mA

6
Rated torque À 40 Ncm
0,20 80
Breakaway torque à ( 100 Ncm 4
Reduction i 405 : 1
Shaft load max. axial â ) 30 N 0,10 40
2
M
Shaft load max. radial Ä ) 50 N
Type of duty S1
1 2 3 4 5 6 0 40 80 120 Ncm
u Weight approx. 0,12 kg
M
U Clockwise: 4 to (+), 6 to (–)
Counterclockwise: 6 to (+), 4 to (–)
29 63,5
21,6 47
4 19,25
6 11
14
33,5
36
10
5
65,5
72
R1
2,5
90°
10
45,2
15
°
S 3 2 1
S
14,4 27,2 °
6 5 4
183 4,6
S Connection: Socket housing 1 928 403 095 with socket contact Tyco No. 928 999-1.
VMC
12 V 0.16 W
P2 I n
Part number 0 132 801 346 mW mA min–1
UP = 12 V
P2
Nominal current Á ) 150 mA

Maximum current Â ) 270 mA 160 200 4
Nominal speed á 4,5 minÉ
120 150 3
Breakaway torque à ( 120 Ncm
Reduction i 450 : 1
Shaft load max. axial â ) 30 N

Shaft load max. radial Ä ) 50 N 40 50 1
Type of duty S1
0 0 0
Weight approx. 0,09 kg 0 30 60 90 120 Ncm
M
27 47
11 6,6
R
10
,5
36
62°
54,5
72
46,25
,5
12
R
90
°
7,4 4,6
14,5 25 6
56 27,5 57
Plug housing Tyco-No. 1355082-1. Terminal housing PN Tyco-No. 928 999

VMC
with potentiometer 12 V 0,16 W
P2 I n
UP = 12 V
Design, technical data, overall dimensi- mW mA min–1
n
P2
I
ons, and sequence chart are identical 200 250 5
to the motor 0 132 801 346, but with
an additional potentiometer to adjust
160 200 4
the different angel positions exactly
(see connection diagram).
120 150 3
Angle of rotation Part number

80 100 2
mechanical electrical
360° 120° 0 132 801 347
360° 150° 0 132 801 348 40 50 1
360° 180° 0 132 801 349

360° 250° 0 132 801 350 0 0 0
0 30 60 90 120 Ncm
360° 340° 0 132 801 351 M
27 47
11 6,6
R
10
,5
36
62°
54,5
72
46,25
,5
12
R
90
°
7,4
14,5 4,6 25 6
123 56 27,5 57
Plug housing Tyco-No. 1355082-1.

Terminal housing PN Tyco-No. 928 999
VMC
24 V 0,26 W P2 I n
Up = 26 V
W mA min-1
Part number 0 132 801 143 P2
Nominal power p 0,26 W 0,20
100 10
Nominal current Á ) 100 mA n I

0,15 80
Rated torque À 35 Ncm 8
Breakaway torque à ( 70 Ncm 0,10

60
Reduction i 310 : 1
Direction of rotation L/R 40
4
Shaft load max. axial â ) 30 N 0,05
Shaft load max. radial Ä ) 50 N 20
M Type of duty S1
0 25 50 75 Ncm
1 2 3 4 5 6 M
Clockwise: 1 to (+), 3 to (–)
Counterclockwise: 1 to (–), 3 to (+)
29 63,5
1,5 47
4 19,25
6 11
4,6
33,5
36
65,5
72
45,2
S 1 2 3
14,4 6 5 4 S 27,2 60°

4,6
S Connection: Socket housing 1 982 403 095 with socket contact Tyco No. 928 999-1

VMC
12 V 0,29 W P2 I n
Up = 13 V
W mA min-1
Part number 0 132 801 142 I
Nominal voltage 5 12 V n P2
Nominal power p 0,29 W 0,30 225 9

Nominal current Á ) 180 mA
Rated torque À 40 Ncm 0,20 150 6

Reduction i 310 : 1
0,10 75 3
Shaft load max. axial â ) 30 N
Shaft load max. radial Ä ) 50 N
M Type of duty S1
0 25 50 75 100 Ncm
1 2 3 4 5 6 M
Clockwise: 1 to (+), 3 to (–)
Counterclockwise: 1 to (–), 3 to (+)
29 63,5
1,5 47
4 19,25
6 11
4,6
33,5
36
65,5
72
45,2
S 1 2 3
14,4 6 5 4 S 27, 2 60°

4,6
S Connection: Socket housing 1 982 403 095 with socket contact Tyco No. 928 999-1

Adjusting elements
for VMC motors
0 132 801 142, ..143
15
8 9 10 8 9
12 12
2
5,9 4
41,5
36
25
31
R16
12
8
8
9 13,2 4,8 18 9 45° 13,2 4,8
18
Part number 1 132 061 016 Part number 1 132 061 023
11,7 9
5° 1,8
40° 17 ° 8
9,4 9
9
2'
RS
3
1 2,3
9 62
6,5
12
2,3
3,5
25
6
104
°
12
316
4,8 '
11,95
6
4,8 12,9 13,2

8 9
4,8
9 6,5 13,2 25
7,8 4,2x45°
13,2
Number of teeth = 24, Modul 1

Part number 1 132 061 025 Part number 1 132 061 027 Part number 1 132 061 028
9 15
23,9 12 10 8 9
13 7 15
5
3
9 0,5
10
6
14,7
3,5
6,7 9 3 2
2 9
43
49
56,5
50
1
12
18
14
12
8
18
4,8
4,8
9 13,2 13°
13,2 9 18
0,2
45° 13,2 4,8
45° 9,6 35°
70°
Part number 1 132 061 047 Part number 1 132 061 048 Part number 1 132 061 049
ø22
9,3
13
2,9 6,5 9
1,5
1
2,5
6
30°
25
12
ø9,02
3,3
1,4
4,8
9 8
8,9 13,2
61° °
61 3,1
5
ø9,02
Part number 1 132 061 050 Part number 1 132 061 074

AHC
12 V 21 W P2 I n
Up = 13 V
mirror-image 0 390 201 912 n
Nominal voltage 5 12 V 800
P2
I
Nominal current Á 6A
Maximum current Â 17 A 600

Breakaway torque à 100 Ncm 400
Reduction i 27 : 4
II I Direction of rotation L/R 10 5
200
U
M 0 25 50 75 100 Ncm
Clockwise: I to (–), II to (+)
Counterclockwise: I to (+), II to (–) M
B) On request
4,6
16 16
11 11
ø39
35
25
53,5
2
14
15
12,5
33
17
SW
A
S 8,1
18
7,3
2x)
5,5 (
12
II
30
14,7
ø11
ø14
15,2 (2x) I
11
23,1 6,45
31,1 35 63,6 11,4
143
A Inner spur gear, number of teeth 8, module 0.8

S Matching plug housing Tyco No. 968 182-1
AHC
12 V 29 W B) P2 I n
Up = 13 V
mirror-image 0 390 201 913 n I
Nominal current Á ) 7,5 mA

Maximum current Â 22 mA 600

400
Reduction i 27 : 4
II I Direction of rotation L/R 10 5
200
U
M 0 50 100 150 Ncm
Clockwise: I to (–), II to (+)
Counterclockwise: I to (+), II to (–) M
B) On request
4,6
16 16
11 11
ø39
35
25
53,5
2
14
15
12,5
33
17
SW
S 8,1 A
18
7,3
2x)
5,5 (
12
II
30
14,7
ø11
ø14
15,2 (2x) I
11
23,1 6,45
31,1 35 78,6 11,4
157,4


AHC
with Hall sensor 12 V 21 W P2 I n
Up = 13 V
P2
I

Breakaway torque à 100 Ncm 400
Reduction i 27 : 4
+ –
IV III II I
Direction of rotation L/R 10 5
200
U
N M 0 25 50 75 100 Ncm
S Clockwise: I to (+), II to (–)
Counterclockwise: I to (–), II to (+) M
B) On request
4,6
16 16
11 11
ø39
35
25
53,5
2
14
15
12,5
SW
17 33
A
S 8,1
18
7,3
2x)
5,5 (
12
II
30
14,7
ø11
ø14
15,2 (2x) I
11
23,1 6,45
31,1 35 63,6 11,4
143

AHC
with Hall sensor P2 I n
P2 Up = 13 V
W A min-1
12 V 29 W B) 12 V 29 W B) n I
Part number 0 390 201 903 Nominal speed á 700 minÉ 30 15

800
mirror-image 0 390 201 915 Nominal torque À 40 Ncm

Nominal voltage 5 12 V Breakaway torque à 140 Ncm
600
Nominal power p 29 W Reduction i 27 : 4
Nominal current Á 7,5 A Direction of rotation L/R 20 10
Maximum current Â 22 A Type of duty S 2 - 5 min 400

+ – Weight approx. 0,40 kg 10 5
IV III II I Clockwise: I to (+), II to (–) 200
Counterclockwise: I to (–), II to (+)
U A square-wave period is generated for each turn of the
armature.
N
B) On request 0 0 0
S M 0 50 100 150 Ncm
4,6
16 16
11 11
ø39
35
25
53,5
2
14
15
12,5
33
17
SW
S 8,1 A
18
7,3
2x)
5,5 (
12
II
30
14,7
ø11
ø14
15,2 (2x) I
11
23,1 6,45
31,1 35 78,6 11,4
157,4

S Matching plug housing Tyco-No. 968 182-1

AHC
12 V 10 W
P2 I n
UP = 13 V
Nominal current Á 5A 12 12 120
Maximum current Â 15 A
Nominal torque À 0,85 Nm 8 8 80
Reduction i 29 : 1
n
1 Type of duty S 2 - 5 min 4 4 40
M
Clockwise: (+) to 3 0 0 0
3 0 1 2 3 Nm
Counterclockwise: (+) to 1
M
3 22 28,5
9,8 24,8 ø14 14,6 14,7
R6
ø5,5 (3x) ø11
x)
(3
x)
(3
R4
R15
13
33
16,5
35
27
75
141,1
1
11,5
3
ø12
39 30,3
AHC
12 V 10.4 W P2 I n
UP = 13 V
P2 I
Nominal power p 10,4 W
15 9 30
Reduction i 119,5 : 1
I Type of duty S 2 - 5 min
M
0 0 0
Clockwise: (+) to I 0 3 6 9 12 Nm
II Counterclockwise: (+) to II M
17 26,7 35
9,8 31,5
29,5
15
50,7
R1
8,6
9,9
1,5
154
ø 16
13 43 26
II I
ø 12
30,3 ø 39

AHC
12 V 8 W P2 I n
n UP =12V
Nominal power p 8W 16 20 24
Maximum current Â 23,5 A
8 10 12
1 2 Direction of rotation L/R
Type of duty S 2 - 5 min 4 5 6
0 0 0
M 0 5 10 15 20 Nm
M
35,8 15
23,1 28
6,05 9 25 23,2 23,2
65 °
R2
7,5
40°
8°
19
30,65
37
6,05
12,5
45°
R2
3 x)
35
(3
,5
14,5 30
X
29,2
75
11,4
26
11
2 1 ø39 30,3 35
X Suitable coupling connector: Housing Tyco No. 0-968 182-1
AHC
with Hall sensor 12 V 8 W P2 I n
n UP =12V
+ – Nominal power p 8W 16 20 24
IV III II I Nominal current Á 8A

N M Nominal torque À 3 Nm
S
8 10 12
I IV
RP Type of duty S 2 - 5 min
IC 4 5 6
Is Degree of protection IP 50
R
UH / L UP
A square-wave period is generated for each turn of the 0 0 0
0 5 10 15 20 Nm
III armature. M
35,8 15
23,1 28
6,05 9 25 23,2 23,2
65°
R2
7,5
40°
8°
19
30,65
37
6,05
12,5
45 °
R2
3 x)
35
(3
,5
30
14,5
X
75
II I
11,4
29,2
26
IV III
11
ø39 30,3 35
X Suitable coupling connector: Housing Tyco No. 0-968 182-1

AHC
12 V 6,3 W
P2 I n
UP = 12 V
I
Nominal speed á 20 minÉ 7,5 12 15
Reduction i 185,5 : 1 5,0 8 10

1 Type of duty S 2 - 5 min 2,5 4 5
M
3 0 4 8 12 16 Nm
M
28 15 28 35,8
9 25 23,1
°
65 ,5
40°
303x)
8°
(
30,65
8,05
37
2
26 R23
35
45°
6,
12,5
90
11,4
1
3
ø12
30,3 39
AHC
with Hall sensor 12 V 6,3 W
P2 I n
UP = 12 V
2 4 1 3
I
S
N M Nominal torque À 3 Nm
Reduction i 185,5 : 1 5,0 8 10

1S Type of duty S 2 - 5 min 2,5 4 5
IC 1 2 Degree of protection IP 50
7IC 7H/L 7B Weight approx. 0,49 kg
4 Clockwise: (+) to 1 0 0 0
0 4 8 12 16 Nm
M
28 15 28 35,8
9 25 23,1
°
65
,5
40°
303x)
8°
(
30,65
8,05
37
2
26 R23
35
3
45°
6,
12,5
90
11,4
2 1
4 3
ø12
30,3 39

AHC
12 V 8 W
P2 I n
UP = 13 V
Nominal power p 8W 16 20 32
Reduction i 185,5 : 1 8 10 16
n
4 5 8
M 2 Degree of protection IP 50
0 5 10 15 20 Nm
1 Counterclockwise: (+) to 2 M
23,2 23,2 15 28 35,8

9 25 23,1
°
65 ,5
40°
303x)
8°
(
30,65
19
6,05
37
2
26 R23
35
45°
6,
12,5
14,5
75
11,4
2 1
29,2
ø12
11 30,3 ø 39
AHC
12 V 6,3 W
P2 I n
UP = 12 V
I
Reduction i 185,5 : 1 5,0 8 10

1 Type of duty S 2 - 5 min 2,5 4 5
M
3 Counterclockwise: (+) to 3 0 4 8 12 16 Nm
M
28 15 28 35,8
9 25 23,1
°
65
,5
40°
303x)
8°
(
30,65
8,05
37
2
26 R23
35
3
45°
6,
12,5
90
11,4
1
3
ø12
30,3 39

AHC
12 V 5 W
P2 I n
UP = 12 V
n
Nominal power p 5W
Nominal current Á 4,5 A 7,5 15 15
I
Nominal torque À 3 Nm 5,0 10 10
Reduction i 217 : 1
Type of duty S 2 - 5 min 2,5 5 5
M Clockwise: (+) to II 0 0 0
0 4 8 12 16 Nm
Counterclockwise: (+) to I
M
28 15 28 35,8
R2
9 25 23,1
7,5
65 ,5
303x)
40
8
(
30,65
37
2
26 R 23
35
45
6,
11,5
12,5
26,7
90
II I
11,4
ø 12
35 30,3 ø 39
AHC
12 V 5 W
P2 I n
UP = 12 V
n
Nominal power p 5W
I
Nominal torque À 3 Nm 5,0 10 10
Reduction i 217 : 1
M Clockwise: (+) to II 0 0 0
0 4 8 12 16 Nm
M
35,8 28 15 28
7,5
23,1 25 9
R2
65
3
(3 0,5
40
x)
8
30,65
37
R 23
26
35
45
6,
3
11,5
12,5
26,7
90
II I
11,4
ø12
ø 39 30,3 35

AHC
24 V 5 W
I n
UP = 26 V
Nominal power p 5W
I
Maximum current Â 7A
Nominal torque À 3 Nm 6 10
Reduction i 217 : 1
3 5
M II Degree of protection IP 50
On request 0 0
I 0 10 20 Nm
M
28 15 28 35,8
R2
9 25 23,1
7,5
65
,5
303x)
40
8
(
30,65
37
2
26 R 23
35
45
11,5 6,
12,5
26,7
90
II I
11,4
ø12
35 30,3 ø 39
AHC
24 V 5 W
I n
UP = 26 V
Nominal power p 5W
I
Nominal torque À 3 Nm 6 10
Reduction i 217 : 1
3 5
M II Degree of protection IP 50
On request 0 0
I 0 10 20 Nm
M
35,8 28 15 28
7,5
23,1 25 9
R2
65
3
(3 0,5
40
x)
8
30,65
37
R 23
26
35
45
6,
3
11,5
12,5
26,7
90
II I
11,4
ø 12
ø 39 30,3 35

AHC
12 V 5 W
P2 I n
UP = 12 V
n
+ – Nominal power p 5W
IV III II I
I
N
S M Nominal torque À 3 Nm 5,0 10 10
Reduction i 217 : 1
R
U U
R
Clockwise: (+) to II 0 0 0
0 4 8 12 16 Nm
M
28 15 28 35,8
R2
9 25 23,1
7,5
65 ,5
303x)
40
8
(
30,65
37
2
26 R 23
35
45
6,
11,5
12,5
26,7
90
II I
11,4
VI III
ø 12
35 30,3 ø 39
AHC
12 V 5 W
P2 I n
UP = 12 V
n
+ – Nominal power p 5W
IV III II I Nominal current Á 4,5 A 7,5 15 15
I
S
N M Nominal torque À 3 Nm 5,0 10 10
Reduction i 217 : 1
R
U U
R
Clockwise: (+) to II 0 0 0
0 4 8 12 16 Nm
M
35,8 28 15 28
7,5
23,1 25 9
R2
65
3
(3 0,5
40
x)
8
30,65
37
R 23
26
35
45
6,
3
11,5
12,5
26,7
90
II I
11,4
VI III
ø12
ø 39 30,3 35

AHC
24 V 5 W
I n
UP = 26 V
Nominal power p 5W
Rp R IS Nominal current Á 2,3 A 9 15
IV I IC Maximum current Â 7A I
UB UH/L
UIC
III Nominal torque À 3 Nm 6 10
Reduction i 217 : 1
IV III II I Direction of rotation L/R
3 5
+ – Type of duty S 2 - 5 min
N M On request 0 0
S 0 10 20 Nm
M
28 15 28 35,8
R2
9 25 23,1
7,5
65
,5
303x)
40
8
(
30,65
37
2
26 R 23
35
45
11,5 6,
12,5
26,7
90
II I
11,4
VI III
ø12
35 30,3 ø 39
AHC
24 V 5 W
I n
UP = 26 V
Nominal power p 5W
Rp R IS Nominal current Á 2,3 A 9 15
IV I IC Maximum current Â 7A I
UB UH/L
UIC
III Nominal torque À 3 Nm 6 10
Reduction i 217 : 1
IV III II I Direction of rotation L/R
3 5
+ – Type of duty S 2 - 5 min
N M On request 0 0
S 0 10 20 Nm
M
35,8 28 15 28
7,5
23,1 25 9
R2
65
3
(3 0,5
40
x)
8
30,65
37
R 23
26
35
45
6,
3
11,5
12,5
26,7
90
II I
11,4
VI III
ø 12
ø 39 30,3 35

AHC
Actuator motor with spindle 12 V I v
UP = 13 V
Part number 0 390 201 941 A mm/s
I
Nominal current Á 6A 20 8
v
Nominal force 500 N
Maximum force Å 3200 N 15 6
Adjustment speed ã 7 mm/s

Clockwise: (+) to I
Counterclockwise: (+) to II
I 5 2
M
0 0
0 1000 2000 3000 N
II F
172,5
162
63
ø10,4
8
2,5
29,3
ø18
28
34
20
max. 143
14,5 35
75
11,4
29,2
max. ø12 11
ø39
30,3
AHC
with Hall sensor 12 V ν
Actuator motor with spindle Part number 0 390 201 927
Nominal force 500 N
Maximum force Å 2800 N ν
Adjustment speed ã 4 mm/s
R A square-wave period is generated for each turn of the
armature.
U U
R
N
➝F

AHC
with Hall sensor 12 V
1 υ
Actuator motor with spindle Part number 0 390 201 989 A mm/s
7P = 13 V
1S Maximum current Â 24 A
IC 1 2 Nominal force 1000 N υ
7IC 7H/L 7B Maximum force Å 3000 N 15 6
4 Adjustment speed ã 6 mm/s

2 4 1 3
5 2
N M 0 0
S 0 1000 2000 3000 N
.
1 3 149
25 65,5
30
19
ø8
2 4
Ø24
ø18
37
29
30
20
34
15
143
30,6
50,5
75
11,4
ø12,5
30,3
AHC
Actuator motor with spindle 12 V
1 ù
7P = 12 V
Nominal voltage 5 12 V ù 1
2 4 1 3 Nominal current Á 13 A
Nominal force 1000 N 20 10
Maximum force Å 2500 N

S
N M Adjustment speed ã 9 mm/s
10 5
1S
IC 1 2
7IC 7H/L 7B
4 0 0
0 1000 2000 N
.
1 3 179
65,5
11,5 54
2 4 30
37
34
29
ø30
ø28
ø18
158
19
22
90
M 22 x 2
11,4
36,45
24
30,6
50,5
ø12,5 R1
2
16
30,3 39

AHP
12 V 4 W
Nominal power p 4W
Reduction i 33 : 1

W With rotation of shaft
AHP
12 V 35 W
Reduction i 33 : 3


AHP
24 V 35 W P2 I n
Up = 24 V
W A min-1
n P2 I

Reduction i 33 : 3
1 Type of duty S 2 - 10 min

M Weight approx. 0,42 kg
0 0 0
0 0,5 1,0 1,5 2,0 Nm
2 M
125
.
ax
M5
m
3
0,
R
ø42
32
4
W
12,5 60,5 0,3 4
26 74,5 23
31 60,5
ø4
G 7,
5
54,5
15,5
15,5
5,5
G Blade terminal housing Tyco No. 180 908-0

Blade terminal 6.3 mm Tycp No. 160 869-2
AHP
12 V 9,2 W P2 I n
Up = 13 V
W A min-1
P2
Nominal speed á 350 minÉ n I

Reduction i 33 : 3
0 0 0
0 0,25 0,50 0,75 1,00 Nm
135
.
ax
M5
m
3
0,
R
ø42
32
W
12,5 70,5 0,3 4
26 84,5 23
31
9 ø4
7,
5
F
54,5
15,5
15,5
5,5
F Blade terminal 6.3 x 0.8


AHP
12 V 6,2 W
Reduction i 33 : 1

AHP
24 V 12 W I
P2 n
UP = 26 V
I
Nominal torque À 0,8 Nm P2

30 8 80
Reduction i 61 : 2 n
On request 0 0 0
0 2 4 6 8 10 Nm
M
133,5
F
,5
28
ø42
120°
ø7
ø8
26
2
ø4
12 0,5 x 45°
15
M6
0°
12 38,5
F Blade terminal 6.3 x 0.8 DIN 46 244

AHP
24 V 12 W I
P2 n
UP = 26 V

P2

20 8 40
Reduction i 61 : 1
On request 0 0 0
0 4 8 12 16 Nm
M
133,5
,5
28
ø42
120°
ø7
ø8
26
6
2
ø4
12 0,5 x 45°
15
M6
0°
12 38,5
AHP
24 V 12 W
Reduction i 61 : 3
U Plastic pinion, removable

Toothed wheel: m = 1; z = 18

AHP
24 V 8 W P2 I n
Up = 24 V
I
Nominal power p 8W
30 6 150
Breakaway torque à 6,2 Nm P2
Reduction i 61 : 3
0 0 0
0 2 4 6 Nm
133,5
,5
28
ø42
120°
ø7
ø8
26
6
2
ø4
12 0,5 x 45°
15
M6
0°
12 38,5
AHP
24 V 11.5 W P2 I n
UP =24V
Part number 0 390 207 696 W A min-1 n
P2

20 10 100
Reduction i 61 : 3
0 0 0
0 2 4 6 Nm
M
133,5
,5
28
ø42
120°
ø7
ø8
26
2
ø4
12 0,5 x 45°
15
M6
0°
12 38,5

AHP
12 V 11 W P2 I n
P2 UP =13V
n
I

20 16 100
Reduction i 61 : 3
0 0 0
0 2 4 6 Nm
M
133,5
,5
28
ø42
120°
ø7
ø8
26
6
2
ø4
12 0,5 x 45°
15
M6
0°
12 38,5
AHP
12 V 10 W P2 I n
UP =12V
n

20 12 80
Reduction i 61 : 3
0 0 0
0 2 4 6 Nm
M
A Blade terminal 6.3 x 0.8 DIN 46 244

AHP
24 V 10 W
Reduction i 61 : 3
A Blade terminal 6.3 x 0.8 DIN 46 244

ADP
24 V 8 W P2 I n
Up = 24 V
Nominal power p 8W
15 6 60
Maximum current Â 8A n
Reduction i 89 : 1
Type of duty S1
0 0 0
0 5 10 Nm
35 33 105
°
ø3
15°
ø8
84
22
0°
11
112,2
121,4
170
ø42
ADP
Electronic speed detection 18 V 23 W P2 I n
Up = 18 V
with Hall sensor. Part number 0 390 207 406 W A min-1
n
Nominal current Á 5A I
Reduction i 84 : 2
Type of duty S1
1 Degree of protection IP 23
M 3 Weight approx. 0,70 kg
0 0 0
4 Four square-wave periods are generated for each turn of 0 5,0 10,0 15,0 Nm
the armature. M
235 33,4
33 10
105
11 °
ø6,2 H11
1,2
M6
A
ø3 H11
ø8
15°
6,5
7
ø8
4
0°
11
120
39 ø42
A Socket housing Tycp No. 280 592-0

Plug socket Tyco No. 181 299-1

FPC
12 V 9 W P2 I n
Up = 12 V
30 30 I
Nominal power p 9W P2
Nominal torque À 1 Nm 40
Reduction i 72 : 1 10 10
1
Direction of rotation L/R 20

M Degree of protection IP 53
0 2,5 5,0 7,5 10,0 Nm
2
M
55 16,2 29,4
34 35,22 12,7 10,6
43
27,64 24,66
ø14
8
50
3
140
32,94 1
2
ø39 30,5

FPG
12 V 9,7 W P2 I n
UP = 13 V
mirror-image 0 130 821 667

n
30 30 90
Nominal power p 9,7 W P2 I
Reduction i 62 : 1 10 10 30
1
0 2,5 5 7,5 10 Nm
2 M
44,3
max.17,2 21,4
12 15,5 16,3
29 0° 12,8
7,7
5,3
5
ø7
ø8
7,5
50
17
138
ø43,05
max. 42 max.39,1
FPG
12 V 8.9 W
P2 I n
Part number 0 130 821 530 W A min–
UP = 2 V

P2
n
I
Degree of protection IP 5X 0 0 30
M I Weight approx. 0,56 kg
0 0 0
II 0 2,5 5 7,5 0 Nm
M
17,5 27
52,3 35 20 19,3
20,8
33
8,6
13,5
25
ø73,9
20
77,6
25
ø8
50
24
127,8
I II
ø43,05

FPG
12 V 9,7 W P2 I n
UP = 13 V

n P2 I
30 30 90
Reduction i 73 : 1 10 10 30
0 2,5 5 7,5 10 Nm
M
58 41,5 22,4
52 14,2
33 17,5 18,7
3,9
1,0
7,5
42
8,5
ø8
30°
30
38,5
42,5
38
max. ø36
4,5
56
R1,
17
5
144
16,5
26,5
ø43,05 39
FPG
24 V 11.6 W
P2 I n
Part number 0 130 821 542 W A min–
UP = 24 V
n
mirror-image 0 130 821 543 P2
Nominal speed á 110,5 minÉ 20 20 60
Breakaway torque à 12 Nm I

Degree of protection IP 5X 0 0 30
M I Weight approx. 0,56 kg
0 0 0
II 0 2,5 5 7,5 0 Nm
M
17,5 27
52,3 35 20 19,3
20,8
33
8,6
13,5
25
ø73,9
20
77,6
25
ø8
50
24
127,8
I II
ø43,05

FPG
24 V 9,7 W P2 I n
UP = 13 V
P2
I
15 7,5 60
Reduction i 73 : 1 5 2,5 20
0 2,5 5 7,5 10 Nm
M
58 41,5 22,4
52 14,2
33 17,5 18,7
3,9
1,0
7,5
42
8,5
ø8
30°
30
38,5
42,5
38
max. ø36
4,5
56
R1,
17
5
144
16,5
26,5
ø43,05 39
FPG
24 V 8,9 W
P2 I n
UP = 26 V
mirror-image 0 130 821 783 I

Nominal voltage 5 24 V 20 12 100
Maximum current Â 14 A 15 9 75

10 6 50
2 1 Reduction i 73 : 1
n
0 2 4 6 8 Nm
M
44,3
12,8
12 7,7 53
0°
29 17,2 5,3 15,2
42,4
ø8
34,5
79
3,7
50
17
138
28,9
1
ø43,05 39,1

CHP
12 V 20 W P2 I n
UP = 11 V
Nominal power p 20 W n
30 30 45
Nominal torque À 5 Nm 20 20 30
Reduction i 55 : 1
Type of duty S1
0 0 0
0 10 20 30 Nm
M
31 35 12
50 0°
28,8 11 31
550
M6
7°
ø13
120°
,8
ø50
14
20,3
135
ø60
CHP
24 V 27,5 P2 I n
UP = 24 V
Part number F 006 B20 097 W A min-1
I
Nominal power p 27,5 W n
48 24 60
Reduction i 69 : 1
gn
Type of duty S1
0 0 0
On request 0 8 16 24 Nm
br
M
35 12
0
12 31
øM6
150
ø7
ø50,8
120
35
11
14 14
128
ø61

CHP
12 V 40 W P2 I n
UP = 12 V
Part number F 006 B20 093 W A min-1
P2
Nominal current Á 10 A I

Reduction i 52 : 2
gn
0 0 0
On request 0 4 8 12 16 Nm
br
M
0 35
12
31 12
øM6
150
ø7
ø50,8
120
35
11
14 14
128
ø61
CHP
12 V 40 W P2 I n
UP = 12 V
P2
Nominal current Á 10 A I

Reduction i 52 : 2
gn
0 0 0
Clockwise: Green (+) 0 4 8 12 16 Nm
br
M
35 29
0° G
12 31 11
M6
150
ø9,8
,8
ø 50
120°
1
22 Z
135
ø59
G Housing for blade receptacles Tycp No. 926 474-1

Z Grooved toothing 8 x 10 DIN 5481 (28 teeth)

CHP
24 V 2,5 W P2 I n
UP = 24 V
n
6 3 15
Reduction i 55 : 1
Direction of rotation R 2 1 5
Type of duty S1
0 0 0
(+) to 53 (green) 0 3 6 9 12 Nm
M
CHP
24 V 21 W P2 I n
Up = 26 V
30 12 60
Maximum current Â 9A n
I
Reduction i 55 : 1
Type of duty S1
0 0 0
53 green, 31 brown. 0 5 10 15 20 25 Nm

CHP
24 V 12 W P2 I n
UP = 24 V

Nominal speed á 29 minÉ 15 7,5 24
Reduction i 55 : 1
Type of duty S1 5 2,5 8
0 0 0
0 5 10 15 20 Nm
M
28 35 120
°
G 11 31
M6
150
120°
ø7
,8
0,94 ø50
11
14
135
ø60
G Housing for blade receptacles DIN 46 340 – B 6.3-MS

CHP
24 V 27,5 W P2 I n
UP = 24 V
I
48 24 60
Reduction i 69 : 1
Type of duty S1
gn
0 0 0
Clockwise: Green (+) 0 8 16 24 Nm
br
M
12
31 0° 25 35 14
13
M6
ø7
120°
F
8
0,
ø5 0,94 Z
11
130
14
ø60
F Receptacles 1 394 478 041, Tycp No. 160 824-6


CHP
24 V 26 W P2 I n n UP = 24 V
I
Reduction i 55 : 1
0 0 0
0 10 20 30 Nm
M
33 35
12
0°
G 14 11 31
19
M6
180
120°
,8
ø50
135
ø60
G Housing for blade receptacles DIN 46 340-B 6.3-MS

CHP
24 V 35 W P2 I n
Up = 24 V
I
60 15 150
Maximum current Â 17,5 A n

Reduction i 52 : 2
Type of duty S1
0 0 0
Counterclockwise: (+) to red, (–) to green. 0 5 10 15 Nm

CHP
24 V 35 W P2 I n
Up = 24 V
I
60 15 150
Maximum current Â 17,5 A n

Reduction i 52 : 2
Type of duty S1
0 0 0
Clockwise: (-) at gn terminal (green) 0 5 10 15 Nm
Counterclockwise: (+) to red, (–) to green.
M
31 35 31 3
° 11
120 31
M6
7,5
13,5
120
ø10
8,5
M4
°
50,8
°
9,4
30
1,5
7
135
1,2
10
19,5 ø 60
CHP
24 V 42 W
Reduction i 52 : 2
Type of duty S1
Clockwise: (-) at gn terminal (green)
Counterclockwise: (+) to red, (–) to green.

CHP
24 V 43 W
Reduction i 52 : 2
Type of duty S1
M
35 31
12
0°
31 11 G
13,5
M6
150
ø1
,8
ø 50
8,5
M4
10
120°
7
10
135
ø59
G Housing for blade receptacles DIN 46 340 – B 6.3-MS
CHP
24 V 53 W P2 I n
Up = 24 V
W A min-1

I
Maximum current Â 37 A P2

Reduction i 52 : 2
Type of duty S1
0 0 0
0 5,0 10,0 15,0 20,0 Nm
35 29
12
0°
31 11
G
M6
150
ø9,8
,8
ø 50
120°
1
22 Z
135
ø59
G Housing for blade receptacles Tyco No. 926 474-1


CHP
24 V 21,7 W
P2 I n
UP = 26 V
W P2
Nominal power p 21,7 W I
Maximum current Â 13 A 40 10 400

Reduction i 38 : 4
20 5 200
Type of duty S1 n
0 0 0
0 100 200 300 Nm
M
31 35
11
0°
12
M6
ø10
50,
120
8
°
22
135
ø59

CEP
24 V 12/16,5 W P2 I n
UP = 24 V
n2
Nominal power p 12/16,5 W P2-2
30 12 45
Nominal current Á 2,5/3,5 A I2
Maximum current Â 9/12 A

Nominal speed á 26/45 minÉ P2-1
I1
n1
Nominal torque À 4,5/3,5 Nm 20 8 30
Breakaway torque à 23/20 Nm

Reduction i 63 : 1
Direction of rotation L 10 4 15
Type of duty S1
0 0 0
0 8 16 24 Nm
M
20 35
35 12
M6
31
31b
53a M
53b
53
37,5
0,8 A10xM8
ø5 DIN 72 783
13
143,5
127,5
120°
ø 61
CEP
24 V 26 W
Part number F 006 B20 106
Reduction i 79 : 1
Type of duty S1
35 35
øM6
150
ø7
ø50,8
37,5
11
14 14
127,5
120
143
ø61

CEP
24 V 26 W
Reduction i 79 : 1
Type of duty S1
35 35
øM6
150
ø7
ø50,8
37,5
11
14 14
120
127,5
143
ø61
CEP
24 V 23 W P2 I n
UP = 24 V
45 30 45
P2
I
Reduction i 79 : 1
Type of duty S1
0 0 0
Clockwise: (+) to green, (–) to brown. 0 10 20 30 Nm
Counterclockwise: (+) to brown, (–) to green. M
35 28 35 14 5,3
12
M6
F
ø7
3x120°
37,5
0,8
ø5 0,94 Z
11
127
142,5
14
ø61
F Receptacles 1 394 478 041, Tyco No. 160 824-6

Z Grooved toothing 8 x 10 DIN 5481; (28 teeth)

CEP
Electronic speed detection 24 V 26 W
with Hall sensor. Part number 0 390 257 651
Reduction i 79 : 1
gn Type of duty S1
3 rt Degree of protection IP 23
M 4 we Weight approx. 1,20 kg
2 sw Clockwise: (+) to green, (–) to brown.
br Counterclockwise: (+) to brown, (–) to green.
A square-wave period is generated for each turn of the
armature.
35
X
35 12
Y
M6
ø7
Z
0,94
37,5
0,8
ø5 X
11
14 14
142,3
127
3x120
°
Y (4)
(3)
(2)
(1)
ø 61
X Housing for blade receptacles DIN 46 340-B 6.3-MS

Y Plug: 4-pole Lumberg 2.5 MBC, plug connector 2.5 MSF, terminal spring FC 01 L
CEP
Electronic speed detection 24 V 10,5 W P2 I n
with Hall sensor. Part number 0 390 257 653 W A min-1
UP = 24 V
P2
18 12 30
I
Reduction i 63 : 1
gn Type of duty S1
3 rt Degree of protection IP 23
M 4 we Weight approx. 1,10 kg
2 sw Clockwise: (+) to green, (–) to brown. 0 0 0
0 8 16 24 Nm
br Counterclockwise: (+) to brown, (–) to green. M
A square-wave period is generated for each turn of the
armature.
35
X
35 12
Y
M6
ø7
0,94
37,5
0,8
ø5 X
11
14 14
142,3
127
3x120
°
Y (4)
(3)
(2)
(1)
ø 61
X Housing for blade receptacles DIN 46 340-B 6.3-MS

Y Plug: 4-pole Lumberg 2.5 MBC, plug connector 2.5 MSF, terminal spring FC 01 L

CDP
24 V 22/29 W P2 I n
UP = 28 V
P2-1
Nominal voltage 5 24 V I2
Nominal power p 22/29 W

45 15 45
Nominal current Á 4,5/5,5 A n2 P2-2
I1

Nominal speed á 21/35 minÉ
Nominal torque À 10/8 Nm 30 10 30
Breakaway torque à 50/41 Nm n1
Reduction i 77 : 1
53b 15 5 15
Type of duty S1
53
31b +
M 53a
0 0 0
0 20 40 60 Nm
0 I II M
31
42 50 16
13
M6
ø4
9
12
8
˘72
44
8
12
0°
160
(4) 53 (5) 31b (6)
62
(3) 31 (2) 53b (1) 53a
Z teethnumber z = 42
CDP
24 V 22 W P2 I n
UP = 28 V
P2
I
30 12 30
Reduction i 108 : 2
0 0 0
0 10 20 30 Nm
M

EDP
24 V 32/39 W
Nominal power p 32/39 WB)
Nominal current Á 3/4 A
Nominal speed á 21/36 minÉ
Nominal torque À 15/10 Nm
Breakaway torque à 105/80 Nm
Reduction i 96 : 2
Type of duty S1
B) Level I/level II

EFP
24 V 56 W P2 I n
Up = 24 V
150 30 60
Maximum current Â 36 A P2

Reduction i 80 : 2 n
Type of duty S1
0 0 0
0 20 40 60 Nm
EFP
24 V 67 W
Reduction i 80 : 2
Type of duty S1

94 | Blowers with D.C. motors
Blowers with D.C. motors
Product features
• Wide range of blowers

• D.C. voltage range 12 V and 24 V
• Axial and radial-type blowers available
• RPM control
• Low noise development

• High efficiency
• Low weight
As the largest manufacturer of electric motors in Europe, Bosch provides

a comprehensive range of blower and engine-cooling products for every
output range. Our blower range consists of single or multiple-stage suction
or pressure blowers. The delivery range encompasses radial and axial-type
blowers for 12 V and 24 V. The blowers are designed for operating mode
S1 (continuous operation). The modules are available with brush-type
motors or as brushless drives. The compact design of the modules means
that they can be easily installed in areas where space is at a premium.
Application examples
Heating, ventilation, air-conditioning and engine cooling, cooler blowers
in general

Blowers with D.C. motors | 95
APK
12 V radial
Volumetric flow J 10 mZ·hÉ
Differential pressure çd 62,5 Pa
Speed á 4600 minÉ
Type of duty S1
1– +3
2
15
50 86 2,5
ø30
27
76
40
9,8°
28,
53°
85
260 12 30 30°
35,6
340
77,6
(+)3 2 1(-)
APK
12 V radial
Differential pressure çd 60,0 Pa
Speed á 4700 minÉ
Type of duty S1

BPA
12 V radial I n Δp
Up = 13 V
A min-1 Pa
Part number 0 130 007 804 II
I
Volumetric flow J 190 mZ·hÉ 7,5 6000 750

Differential pressure çd 400 Pa
Speed level I 2000...2500 minÉ
Speed level II 3000...4000 minÉ
5,0 4000 500
Direction of rotation L I n
Type of duty S1
n
Weight approx. 0,64 kg 2,5 2000 250
Δp
Connections: 33f black-red, 33b black-yellow, 31 brow Δp
0 0 0
0 50 100 150 200 m3/h
F Blade terminal Tyco No. 42 460 –1.
BPA
12 V axial
Speed á 4500 minÉ
Type of duty S1
Connections: Blade terminals 2.8 x 1

BPA
12 V radial
I n Δp
Part number 0 130 007 810 A min–1 Pa
UP = 12 V
Volumetric flow J 400 mZ·hÉ n
Differential pressure çd 250 Pa 7,5 6000 750
Speed á 6500 minÉ

I
Type of duty S1 5,0 4000 500
2,5 2000 250
Δp
0 0 0
0 30 60 90 120 m3 /h
V
250
20° 142
11
93
38
56
58
64
70
°
BPA
24 V radial
Speed level I ì 1800 minÉ
Type of duty S1
A Blade receptacles 6.3 x 0.8.

Connections: 33b red, 33f black, 31 brown.

BPA
24 V axial
Type of duty S1
Connections: Blade receptacles 6.3 x 0.8.

CPB
12 V radial
Speed á 2350...2900 minÉ
Type of duty S1
Connections: (+) blade terminal 6.3 x 0.8 (red), (–)
blade terminal 6.3 x 0.8 (brown).
CPB
12 V radial
Type of duty S1
Connections: (+) blade terminal 6.3 x 0.8 (red), (–) blade receptacle 6.3 x 0.8 (brown).

CPB
12 V radial
n I Δp
Part number 0 130 063 810 min-1 A Pa
UP =13V
Nominal voltage 5 12 V Δp
Differential pressure çd 470 Pa 6000 30 750

n
I
-sw +gn Connections: (+) green, (–) black.
2000 10 250
0 0 0
M 0 200 400 600 m3
V h
(+)
(–)
153
F
5
28
ø6,5
65 13 66 (+) (–)
10 175 186
F Blade terminal housing MPM-280/2, blade terminal MPP-280/3.9-2.0.
CPB
24 V radial
Type of duty S1
Connections: (+) blade terminal 6.3 x 0.8 (red), (–)
blade terminal 6.3 x 0.8 (brow

CPC
24 V radial
n I Δp
Part number 0 130 063 814 min-1 A Pa
UP =26V
I
Volumetric flow J 400 mZ·hÉ Δp
Differential pressure çd 500 Pa 6000 7,5 750

Direction of rotation R n
Type of duty S1 4000 5,0 500

-sw +rt Connections: (+) red, (–) brown.
2000 2,5 250
0 0 0
M 0 200 400 600 m3
V h
(+)
153
(–)
F
0
22
ø6,5
10 175 13 66 (+) (–)
186
F Blade terminal housing Tyco 180 908-0, blade terminal Tyco 928 947-2.

DPE
12 V axial
Volumetric flow J 0,55 K
Speed level I ì ( 2800 min!
Speed level II í ( 3400 min!
Type of duty S1
A Blade receptacle 6.3 x 0.8
DPE
24 V axial
Speed á ( 3100 min!
Type of duty S1

DPG
12 V axial
Type of duty S1
DPG
12 V
Type of duty S1
+ –
57
107,25
ø309,81
ø75,8

DPG
24 V axial
Type of duty S1

GPB
12 V axial
Speed level II í 2400 minÉ
Type of duty S1
GPB
24 V 260 W
Part number F 006 D10 029 Δp I n
UP = 8 V
Nominal voltage 5 24 V Pa min–

n
Direction of rotation R n
Type of duty S1 00 00

Weight approx. 2,50 kg Δp Δp
00 00
I
+ + – 0 0 000
I
0 00
I
9V II
– 0 0 0
V Rv M 0 0, 0, 0,6 0,8 kg/s
,
17,2
ø7
479
287,5
100,8
45
316 13,8
193,5 4
387,1 13,8 117,6

GPB
12 V axial
Speed á 3400 rpmÉ
Type of duty S1
Connections: (+) red), (–) brown.
+ –
120
76
,2 89,4
21,5
ø110,7
ø138
30
0
12
GPB
12 V axial
Type of duty S1

GPB
12 V axial
Type of duty S1
Connections: 1 black, 2 white, 3 green.
2 (+)
1 (–) 3 (+)
GPB
12 V axial I n Δp
Part number 0 130 303 897 A min-1 Pa n
Speed á 3400 rpmÉ
Type of duty S1 I
20 20 400
+ - Connections: 1 brown, 2 red.
10 10 200
Δp
M 0 0 0
0 0,2 0,4 0,6 m3/s
V
1 (–) 59
8 2 (+) 36
° 21,5
90
12
3x
ø307,5
ø313
ø301
ø284
3x
8

GPB
12 V axial I n Δp
Part number 0 130 303 805 A min-1 Pa
Volumetric flow J 0,6 K I
Speed á 2200 rpmÉ n
- + (–) brown, (+) red.
5 1000 100
Δp
M 0 0 0
0 0,2 0,4 0,6 0,8 m3/s
V
21,2 64,5
80
0,5 °
30 45
22
95,3
35°
33°
ø110,8
153,2
300,5
ø381
ø442
352,4
5°
2,0
7,5
215,9 18°
300,5 48
GPB
12 V axial I n Δp
Differential pressure çd 200 Pa 30 3000 300 n
Speed level I ì 2200 minÉ I
Direction of rotation R 20 2000 200
Type of duty S1
(+) (+) (–) Weight approx. 2,70 kg
Connections: (+) Stage I green, (+) Stage II red, (–) 10 1000 100
brown.
MTS
Δp
R
M 0 0 0
0 0,25 0,5 0,75 1,0 m3/s
V
68,6
80 21,2 64,5
0,5 °
30 45
22
95,3
35°
33°
ø110,8
153,2
300,5
ø381
ø442
352,4
5°
2,0
7,5
215,9 18°
300,5 48

GPB
12 V axial I n Δp
n
Speed á 3200 rpmÉ
Type of duty S1 I
20 2000 200
+ - Connections: 1 brown, 2 black.
10 1000 100
Δp
M 0 0 0
0 0,2 0,4 0,6 m3/s
V
59
8 36
90
° 13,5
12
3x
307,5
301
284
3x
8
1 (–)
2 (+)

GPD
12 V axial
Speed á 3400 min!
Type of duty S1
+ - Connections: (–) brown, (+) black red.

Notes | 111

Brushless D.C. motors as blower drives

Developed for use as engine cooling blowers in the vehicle
Product features
• Short installation length

• High output
• High efficiency
• RPM control
• Soft start
• Lock-up detection
• Broad ambient-temperature range
• Integrated power electronics
• High continuous output
• Long service life
• Diagnosis capability
Design Commutation of the coil currents is by means of an integrated inverter.

Electronically commutated, brushless D.C. external-rotor motor with The motor is configured for a single direction of rotation. It is not protected
permanent excitation and integrated control electronics (BLDC motor). against reverse polarity.
The motor housing is connected internally to the negative terminal of the

Description of operation voltage supply.
The motor speed can be continuously adjusted and regulated in a range
between 625...2,500 min–1. To do so, a pulse-width-modulated signal has Overrun cut-off
to be generated. • for blocked motor
A microcontroller evaluates the input signal and adjusts the set value for • outside permissible operating-voltage range
the speed.

QBA
12 V
Rated voltage UN 12 V
Operating voltage UB 8.5...16.2 V
Maximum current1 I.max 48 A ±2 A
Max. volumetric flow Vmax 0.85 m3 · s–1
Max. pressure difference ∆pmax 220 Pa
Rotational-speed range n 625...2,500 min–1
RPM control PWM signal 2
Operating mode S1
Weight approx. 4.6 kg
1 Minus Order number 0 130 706 816
1
2 Plus Internal current limitation
2
3 Control line Pulse-width modulation
4 Signal wire for PWM signal

Connection diagram for PWM signal wire Duty cycle TVin of the PWM signal Relative change in speed
TP: Period of PWM signal
Thigh: Duration of high level
Uhigh ≥ 5.66 V; Ulow ≤ 1.80 V
Set-value signal Control line Pin 3 on Speed n Control line Pin 3 off Speed n
Pulse-width-modulated signal (PWM signal) 0 ≤ TV ≤ 5 % Uncontrolled nmax 0 ≤ TV ≤ 5 % Motor off
with a duty cycle of 5...50 Hz and a high level 5 % ≤ TV ≤ 12 % Motor off 5 % ≤ TV ≤ 12 % Motor off
dependent on the operating voltage. 12 % ≤ TV ≤ 15 % Minimum nmin 12 % ≤ TV ≤ 15 % Minimum nmin
15 % ≤ TV ≤ 85 % Controlled 15 % ≤ TV ≤ 85 % Controlled
The set value of the speed is defined by the duty 85 % ≤ TV ≤ 100 % Uncontrolled nmax 85 % ≤ TV ≤ 100 % Uncontrolled nmax
cycle TVin = Thigh/TP. 100 % constant Uncontrolled nmax 100 % constant Motor off

114 | Water pressure pumps with D.C. motors
Water pressure pumps with D.C. motors
Application
The main application is for
vehicle washer-pump assemblies.
Please contact us if the
pumps are to be used for fluids
other than water.
Type
Water pumps are centrifugal
pumps with permanent-magnet
DC motors.
PAC
12 V
Delivery J 0,75 :
Delivery pressure d 1,5 bar
Degree of protection IP 54A

Water pressure pumps with D.C. motors | 115
PAC
12 V
Delivery J 2:
PAC
24 V
Delivery J 0,75 :

116 | Water-circulation pumps with D.C. motors
Water-circulation pumps with D.C. motors
Application
1 Pump housing made of polyamide ww. polyetherimide, 2 Bearing bolt made of stainless steel,
If the pumps are to be used for fluids 3 Pump housing made of polyphenylene sulfide, 4 Pump housing made of polyamide,
other than water, please consult us 5 Impellor made of plasto ferrite, 6 Solenoid-operated coupling made of plasto ferrite,
first. 7 O-ring made of soft rubber.
Version
Rotary pumps with solenoid-operated 2 3 4
coupling, no sealing between motor
and pump unit, and therefore leak-
proof.
1 5 7 6
Note
Operation of these water pumps is not
regenerative.

Water-circulation pumps with D.C. motors | 117
PAA
12 V
I Δp
Part number 0 392 020 024 A bar
UP = 13 V
Delivery J 530 g
Delivery pressure d 0,1 bar 1,5 0,15
Δp
Type of duty S1
Degree of protection IP 4 K 0 1 0,1
Weight approx. 0,4 kg I
0,5 0,05
0 0
0 400 800 1200 l/h
V
PAA
12 V
I Δp
UP = 13 V
Δp I
Delivery J 1200 g
Type of duty S1
Degree of protection IP 5 K 4B) 1 0,1
B) Applies only with receptacle housing in place
0,5 0,05
U
M 0 0
0 500 1000 1500 l/h
V

PAA
12 V
I Δp
UP = 13 V
Delivery J 530 g
Δp
Type of duty S1
Degree of protection IP 4 K 0 1 0,1
Weight approx. 0,4 kg I
0,5 0,05
U
M 0 0
0 400 800 1200 l/h
V
48,5
12,5
13,2
149 16
17
8°
29 4
41
24
26
4
61
22,5
20
42,3
54
PAA
12 V
I Δp
UP = 13 V
Delivery J 750 g
I
Type of duty S1
Degree of protection IP 5 K 4B) 1 0,1
Δp
0,5 0,05
0 0
0 600 1200 l/h
V
48,5
12,5
150 16
30 4
41
24
26
4
61
22,5
20
43,3
55

Water-circulation pumps with D.C. motors | 119
PAA
24 V
Delivery J 1200 g
Type of duty S1
Degree of protection IP 5 K 4B)
+ –

PCA
12 V
I Δp
Part number 0 392 022 002 A hPa
UP = 13 V
Δp
Delivery J 1200 g
Delivery pressure d 0,3 bar 4,5 450
Direction of rotation R I
Operating mode S1
Degree of protection IP 5 K 4B) 3 300
1,5 150
M 0 0
0 500 1000 1500 l/h
V
ø21
30,5 9
ø17,2
ø19
93
192,7 17
30,5 94
ø21
ø17,2
ø19
82,5
ø 59
6
PCA
12 V I Δp
Part number 0 392 022 010 U P = 13 V
A kPa
Delivery J 1400 g 6 60
Δp
4,5 45
Operating mode S1
Degree of protection IP 5 K 4B) I
3 30
1,5 15
U
M 0 0
0 500 1000 1500 l/h
V
63 170
20 32,1 94 12
20
ø23
ø22
ø59
ø5
20
+ –

Notes | 121

PAD Water-circulation pumps with brushless drive
The essential advantages of the PAD auxiliary

water pump in comparison to pumps, which
are driven by carbon-brush mechanically-
commutated electric motors, are:
• A reduction in installation length of

up to approx. one third
• Approx. half the weight
• High delivery rate
• Longer service life
• Better efficiency
• Quieter operation
Water circulation pumps with brushless drive
The PAD is a rotary pump. The stator and electronics are mechanically Application examples
fully-separated from the rotor in the dry motor housing. The electronics For versatile applications Bosch offers auxiliary water pumps with
and the stator winding generate an alternating electrical magnetic field, electronically commutated drive motors:
which in turn drives the rotor. The rotor, as part of the pump wheel, • Heater circuit
is seated in the separate pump housing. The non-contact torque trans- • Auxiliary heater
mission serves to ensure that throughout the entire service life coolant • Charge-air cooling
does not come into contact with the electronics. • Generator cooling
• Turbocharger cooling
• Fuel cooling
• After-run cooling of combustion engines
• Thermal management of electric vehicles
• Battery and electronic cooling

Water-circulating pump driven by brushless motor | 123
PAD
Water-circulating pump 12 V
driven by brushless motor Part number 0 392 023 004
1
A
F
bar
7P = 13 V
Delivery quantity J 900 g 1,2 0,2
1
Type of duty S1 0,9 0,15
Degree of protection IP 69 K
0,6 0,1
Circuit diagram for connection please contact us
0,3 0,05
F
0 0
0 500 1000 I/h
8
ø60 ≥19 69
18,2
22,5
ø19,5
ø18,4
ø18,4
1,7
50 97,8 ≥19

124 | Bi-pressure pump
Bi-pressure pump
Application
Example applications in
automotive engineering:
- Individual comfort seat adjustment
- Raising and lowering headrests
- Central locking
- Closing assistance for doors
and trunk lids
- Operation of pneumatic actuators
Bi-pressure pump
Air pump for mobile and Bi-pressure pump
stationary pressure supply Part number 1 137 222 030
I
A
Δp
bar
UP = 12 V
Delivery J 16 :
Delivery pressure d 1 bar 12 3
Direction of rotation R/L

Type of duty S3-6%
p I
4 1
0 0
0 5 10 15 20 l/min
V
152
48,5
39 93,4 59,2
7 85
42
ø54
ø50
ø21
ø52
14
5
ø5,8
A 4,75 D S 28,1
2
7
2
3

Notes | 125

126 | Solenoid valves
Solenoid valves
Valves for water-quantity control Application Valve models

Heater control for passenger cars The lower valve cone is
and commercial vehicles. designed as a non-return valve.
The valves are open when
de-energized.
Shutoff- or pulse valve
W and W´ heat exchanger optionally upstream or downstream of valve
Changeover valve or pulse valve

Solenoid valves | 127
Shutoff or timing valves

12 V
Nominal resistance G 12,4 A
Pressure drop çd 0,25 bar
at a throughput of J 2000 :
Switchable
pressure difference çd 1,6 bar
Switching times ) 150 ms
Duty cycle 0 ... 100 %
Weight approx. 390,0 g
Shutoff or timing valves

24 V
Nominal resistance G 48 A
Switchable
F Blade terminal Tyco No. 160 450-3

G Blade terminal housing Tyco No. 180 908

128 | Solenoid valves
Switching or timing valves

12 V
Nominal resistance G 12,4 A
Switchable
Switching or timing valves

24 V
Nominal resistance G 48 A
Switchable

Notes | 129

130 | Part numbers
Part numbers
Part number page Part number page Part number page
0 130 002 092 11 0 130 063 810 100 0 130 303 805 108
0 130 002 211 11 0 130 063 814 101 0 130 303 806 108
0 130 002 525 12 0 130 101 102 36 0 130 303 897 107
0 130 002 527 12 0 130 101 103 35 0 130 303 902 109
0 130 002 529 13 0 130 101 108 35 0 130 305 206 110
0 130 002 530 13 0 130 101 112 36 0 130 706 816 113
0 130 002 562 14 0 130 101 117 37 0 130 821 530 77
0 130 002 613 17 0 130 101 123 37 0 130 821 531 77
0 130 002 632 15 0 130 107 077 103 0 130 821 542 78
0 130 002 633 16 0 130 107 100 34 0 130 821 543 78
0 130 002 634 16 0 130 107 212 104 0 130 821 666 77
0 130 002 636 17 0 130 109 207 102 0 130 821 667 77
0 130 002 671 14 0 130 109 213 102 0 130 821 682 78
0 130 002 672 15 0 130 110 002 33 0 130 821 683 78
0 130 002 673 18 0 130 110 003 32 0 130 821 782 79
0 130 002 674 18 0 130 110 005 32 0 130 821 783 79

0 130 002 828 95 0 130 110 019 33 0 130 821 916 79
0 130 002 830 95 0 130 111 003 27 0 130 821 917 79
0 130 007 027 20 0 130 111 042 31 0 130 822 003 76
0 130 007 051 19 0 130 111 101 30 0 130 822 004 76
0 130 007 304 96 0 130 111 110 28 0 132 801 141 52

0 130 007 342 20 0 130 111 130 30 0 132 801 142 54
0 130 007 343 19 0 130 111 136 29 0 132 801 143 53
0 130 007 802 98 0 130 111 159 28 0 132 801 346 52
0 130 007 803 97 0 130 111 171 27 0 132 801 347 53
0 130 007 804 96 0 130 111 189 29 0 132 801 348 53

0 130 007 810 97 0 130 302 001 43 0 132 801 349 53
0 130 063 012 22 0 130 302 002 41 0 132 801 350 53
0 130 063 029 25 0 130 302 003 41 0 132 801 351 53
0 130 063 040 23 0 130 302 009 42 0 390 201 900 56
0 130 063 042 23 0 130 302 012 42 0 390 201 901 56

0 130 063 059 25 0 130 302 013 44 0 390 201 902 57
0 130 063 075 21 0 130 302 014 44 0 390 201 903 57
0 130 063 076 22 0 130 302 015 43 0 390 201 912 56
0 130 063 092 24 0 130 303 001 39 0 390 201 913 56
0 130 063 602 26 0 130 303 003 38 0 390 201 914 57

0 130 063 604 26 0 130 303 015 39 0 390 201 915 57
0 130 063 804 99 0 130 303 233 107 0 390 201 918 59
0 130 063 805 99 0 130 303 245 105 0 390 201 925 59
0 130 063 809 100 0 130 303 246 106 0 390 201 927 66

Part numbers | 131
Part number page Part number page Part number page
0 390 201 941 66 0 390 257 685 83 3 137 227 744 40

0 390 201 944 61 0 390 257 687 85 9 390 453 009 87
0 390 201 964 58 0 390 257 688 86 F 000 MM0 001 47
0 390 201 972 60 0 390 257 689 83 F 000 MM0 003 47
0 390 201 973 60 0 390 257 690 84 F 000 MM0 616 46
0 390 201 989 67 0 390 257 691 86 F 000 MM0 617 45

0 390 201 997 58 0 390 257 693 85 F 000 MM0 618 45
0 390 201 999 61 0 390 257 694 84 F 000 MM0 619 46
0 390 202 600 69 0 390 257 697 82 F 000 MM0 805 48
0 390 203 224 62 0 390 257 699 82 F 006 B10 132 106
0 390 203 225 62 0 390 442 409 93 F 006 B10 134 103
0 390 203 226 64 0 390 442 410 93 F 006 B10 148 21
0 390 203 227 64 0 390 442 451 92 F 006 B20 093 81
0 390 203 229 67 0 392 003 501 114 F 006 B20 097 80
0 390 203 310 63 0 392 020 024 117 F 006 B20 106 88
0 390 203 311 63 0 392 020 027 119 F 006 B20 111 89
0 390 203 312 65 0 392 020 034 118 F 006 D10 029 105
0 390 203 313 65 0 392 020 039 118 F 006 KM0 60F 38
0 390 206 616 73 0 392 020 064 117 F 006 MG0 30B 24
0 390 206 617 73 0 392 022 002 120
0 390 206 634 69 0 392 022 010 120

0 390 206 682 70 0 392 023 004 123
0 390 206 692 68 0 392 040 001 115
0 390 206 693 68 0 392 040 008 115
0 390 207 405 75 1 132 061 016 55
0 390 207 406 75 1 132 061 023 55

0 390 207 604 74 1 132 061 025 55
0 390 207 605 70 1 132 061 027 55
0 390 207 606 71 1 132 061 028 55
0 390 207 696 72 1 132 061 047 55
0 390 207 697 72 1 132 061 048 55

0 390 207 698 71 1 132 061 049 55
0 390 242 301 88 1 132 061 050 55
0 390 242 401 91 1 132 061 074 55
0 390 242 409 91 1 137 222 030 124
0 390 251 684 81 1 147 412 020 127

0 390 251 690 80 1 147 412 033 127
0 390 257 651 90 1 147 412 049 128
0 390 257 652 89 1 147 412 094 128
0 390 257 653 90 3 137 227 713 40

132 | Data-sheet inquiry
Should you have any special requests, which go beyond the range of Please use this printed data sheet as a master copy and return
motors we have on offer, please note these on the following data sheet. the filled out copy.
In the event of any modifications, please state the known product here.
Bosch-
Order no.:
Please select address (from list opposite): Sender (customer):
Your reference/dated Our dept./person in charge Telephone (extension) Date
Project, application:
Annual requirement 1. Year: 2. Year: Direction of rotation Right

(viewed towards drive shaft end)
Rated voltage V Left
Rated speed min–1 Installation space
Rated torque Ncm Installation length
Starting torque Ncm Shaft end as for series motor
Operating mode: Continuous service as under
Short-time service Ball bearing in drive
Operating time min Performance specification
–1
Number of cycles h Customer drawing
Service life h Degree of protection
Endurance-test condition at
max. °C
Ambient
temperature min. °C

1540 - Kat - EM - en - LoRes Elektromotoren PDF

Uploaded by

Copyright:

Available Formats

1540 - Kat - EM - en - LoRes Elektromotoren PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1540 - Kat - EM - en - LoRes Elektromotoren PDF

Uploaded by

Copyright:

Available Formats

D.C.

motors with and without

The proper drive for your projects

Bosch electric motors for

Bosch provides a wide range of

The ideal contact person can be found

Electric motors 2006 | 2007

1 987 721 540/200606 www.bosch-elektromotoren.de

AA/MKM3 - 06.2006 - En Copy deadline: 31.05.2006

Belgium / Holland Israel Switzerland

Robert Bosch Benelux Ledico Technologies Ltd. Robert Bosch AG

Czech Republic Italy Turkey

Denmark / Norway Japan United Kingdom

Robert Bosch A/S Bosch Corporation Robert Bosch Ltd

Finland Republic of South Africa USA

Robert Bosch Oy Robert Bosch (Pty) Ltd Chief Enterprises, Inc.

Robert Bosch GmbH Robert Bosch AB

Unlimited service – Bosch electric motors

The worldwide competent partner for industrial applications

Bosch Automotive Aftermarket 2006 | 2007

Customer orientation in development, production and sales

2006 | 2007 Bosch Automotive Aftermarket

Nominal values IP degrees of protection

 Housing fastening: By means of screws on  Internal natural cooling: open-type design,

 Surface natural cooling: closed design,

Bosch Automotive Aftermarket 2006 | 2007

IP 2 !2) 3 !3) C M If an index number is not given, then the

2006 | 2007 Bosch Automotive Aftermarket

Operating modes (VDE 0530)

Power input Power input Power input

Power loss Power loss Power loss

Temperature Temperature Temperature

Permanent- Varistor disk

Bosch Automotive Aftermarket 2006 | 2007

Explanation of characteristic curve evaluation

-Identiﬁcation and manufacturer declaration in accordance with EU directive

2006 | 2007 Bosch Automotive Aftermarket

Motors with Hall sensor

If a current IS ﬂows through a chip, a Hall voltage

Since the resulting Hall voltages are extremely

Permanently connected to the armature shaft

Bosch Automotive Aftermarket 2006 | 2007

Hall-effect applications in D.C. motors

Basic arrangement in motor with Output signals, 1 armature rotation.

Basic arrangement in motor Output signals

H1, H2 Hall generator UA1 Output voltage of ﬁrst

2006 | 2007 Bosch Automotive Aftermarket

D.C. motors without transmission

• Wide range of permanent-magnet

Advantages for your application

• Robust and reliable quality,

Bosch Automotive Aftermarket 2006 | 2007

Nominal speed á 9500 minÉ P2

Nominal torque À 2 Ncm

N Cap supplied separately (part number 3 130 508 003)

N Cap supplied separately (part number 3 130 508 003)

Bosch Automotive Aftermarket 2006 | 2007

Bosch Automotive Aftermarket 2006 | 2007

Breakaway torque à 63 Ncm

Housing fastening: By means of screws on Internal natural cooling: open-type design,

Surface natural cooling: closed design,