Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    Date Dsn. by Chk. by Design Sheet Rev. No.: Web Flange Weld

    Uploaded by

    k.m.ariful islam
    This document is a design sheet for a web flange weld. It provides section data for the top flange, web, and bottom flange. It also includes weld data such as allowable stress and size. Stress calculations are shown to check that the shear stress in the weld is acceptable. An intermittent weld clarification section further explains the specifications for an intermittent weld, such as effective weld length and pitch.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Date Dsn. by Chk. by Design Sheet Rev. No.: Web Flange Weld

    Uploaded by

    k.m.ariful islam
    40 views2 pages
    This document is a design sheet for a web flange weld. It provides section data for the top flange, web, and bottom flange. It also includes weld data such as allowable stress and size. Stress calculations are shown to check that the shear stress in the weld is acceptable. An intermittent weld clarification section further explains the specifications for an intermittent weld, such as effective weld length and pitch.

    Original Title

    WLD-001

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a design sheet for a web flange weld. It provides section data for the top flange, web, and bottom flange. It also includes weld data such as allowable stress and size. Stress calculations are shown to check that the shear stress in the weld is acceptable. An intermittent weld clarification section further explains the specifications for an intermittent weld, such as effective weld length and pitch.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    40 views2 pages

    Date Dsn. by Chk. by Design Sheet Rev. No.: Web Flange Weld

    Uploaded by

    k.m.ariful islam
    This document is a design sheet for a web flange weld. It provides section data for the top flange, web, and bottom flange. It also includes weld data such as allowable stress and size. Stress calculations are shown to check that the shear stress in the weld is acceptable. An intermittent weld clarification section further explains the specifications for an intermittent weld, such as effective weld length and pitch.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    Date 06-Jun-06

    Web Flange Weld Dsn. By ZAS


    Chk. By SKK
    Design Sheet Rev. No. 0

    

    


           
            
     
    
            

    Section Data
    Width Thk. Area of Compressio
    Top Flange (tf1) = 250 10 mm Area of web in com
    Web (dw) = 1000 8 mm
    Bottom Flange (tf2) = 250 10 mm

    Weld Data
    For E70XX Electrode (Fu) = 48.23 kN/cm2
    Allowable Stress in weld = 0.3 x Fu kN/cm2
    Allowable Stress in weld = 14.47 kN/cm2
    Sw = 12 mm Size of Weld
    Number of Weld Side = 1

    Ts = Shear Stress in Weld (kN/cm2)


    F= 130 kN Shear Force. (kN)
    Ixx = 194183 cm4 Moment of Inertia
    b= 0.85 cm Width of the weld at the weld section (0.707 x Sw)
    A y = 1262.50 cm3 Moment of area of flange above
    the fibre under consideration.

    Stress in Beam Shear ( Ts ) = F A y / Ixx b


    = 1.00 kN/cm2 Hence OK
    Date 14-Jun-16
    Web Flange Weld Dsn. By KMA
    Chk. By KMA
    Design Sheet Rev. No. 1
    AS PER: AWS D1.1/D1.1M:2004

    


    


           
            
     
    
            

    Section Data
    Width Thk.
    Top Flange (tf1) = 150 6 mm
    Web (dw) = 350 5 mm
    Bottom Flange (tf2) = 150 6 mm

    Weld Data
    For E60XX Electrode (Fu) = 41.34 kN/cm2
    Allowable Stress in weld = 0.3 x Fu kN/cm2
    Allowable Stress in weld = 12.40 kN/cm2
    Sw = 3 mm Size of Weld
    Number of Weld Side = 1

    Ts = Shear Stress in Weld (kN/cm2)


    F= 31 kN Shear Force. (kN)
    Ixx = 7490 cm4 Moment of Inertia
    b= 0.21 cm Width of the weld at the weld section (0.707 x S w)
    Ay= 160.20 cm3 Moment of area of flange above
    the fibre under consideration.

    Stress in Beam Shear ( Ts ) = F A y / Ixx b


    = 3.13 kN/cm2 Hence OK

    Intermittent Weld Clarification:

    The Specification of Intermittent Weld are as follows:


    a. Effective length of each intermittent weld is= 38 mm
    b. Pitch (p) of intermittent weld: The clear spacing of intermittent weld should not exceed
    a 24x thickness of thinner part = 120 mm
    b will not exceed 300 mm= 300 mm
    hence for 120 mm clear spacing between the weld,p= 158.00 mm
    This is the maximum spacing. However , The spacing or pitch should be such that the shear in the weld is not
    more than Ts (Shear Stress)
    strength of weld per linear meter (consider both side) 5.26 KN/cm
    use 38 mm long intermittent weld on both side of web plate, weld strength = 19.99 KN/cm
    weld spacing,p 6.40 cm
    63.95 mm

    You might also like