Scribd
Upload
136 views1 page

Tools

This document contains a worksheet with blanks to be filled in regarding proper computer maintenance procedures. It asks the student to identify ways to equalize static electricity, tools for tightening and loosening screws and bolts, appropriate distances for compressed air cleaning, and solutions for cleaning screens and electrical contacts. The student is also asked to identify the tools that correspond to each maintenance task.

Uploaded by

Mary Joy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
136 views1 page

Tools

This document contains a worksheet with blanks to be filled in regarding proper computer maintenance procedures. It asks the student to identify ways to equalize static electricity, tools for tightening and loosening screws and bolts, appropriate distances for compressed air cleaning, and solutions for cleaning screens and electrical contacts. The student is also asked to identify the tools that correspond to each maintenance task.

Uploaded by

Mary Joy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Name: _________________________________________ Date: ___________________

Computer 8

Direction. Fill in the blanks. Write your answers before the number.

1. The purpose of an antistatic wrist strap is to ________ the electrical charge between you and the equipment.

2. Turn the screwdriver _________ to tighten the screw

3. Turn the screwdriver ________________ to loosen the screw.

4. Use a ________ head screwdriver with crosshead screws.

5. On electrical components, an excessive build-up of dust will act like an _________and trap the heat.

6. When compressed air is used to clean inside the computer, the air should be blown around the components
with a minimum distance of ______ inches from the nozzle.

7. Pencils should not be used inside the computer to change the setting of switches or to pry off jumpers
because the tip contains _____ which can act as a conductor and may damage the computer components.

8. To clean the screens of CRT monitors, dampen a soft, clean, lint-free cloth with_______ water and wipe the
screen from top to bottom.

9. Clean the contacts on components with _________ alcohol.

10. Use a __________ to loosen and tighten bolts that have a hexagonal (six-sided) head.

Direction. Identify the appropriate tool to use for each of the following:

_________________1. Equalize the electrical charge between you and the equipment.

_________________2. Tighten / loosen screw

_________________3. Tighten / loosen bold with a hexagonal head

_________________4. Retrieve parts that may be hard to reach by your fingers

_________________5. Tighten / loosen a slotted screw.

You might also like