PRESSURE CONTROLS

H/HC Type Pressure Control Valves

These valves are hydraulically damped, direct operated, pressure control valves which can be actuated by internal or
external pilot pressure.

H Type Pressure Control Valves HC Type Pressure Control Valves

There are various types of valve including sequence,
unloading and low pressure relief valves, all of which
They are available with integral check valves for use
when free reverse flow from secondary port to the
C
are operated by a pressure rise in the circuit, sensed primary port is desired. There are various types of
either internally or remotely. valve including sequence and counterbalance valves, all
of which are operated by a pressure rise in the circuit,
sensed either internally or remotely.

Pressure Control Valves

H / HC Type
Specifications
Model Numbers Max. Oper- Max. Flow Approx. Mass kg (lbs.)
Series Threaded Sub-plate ating Pres. L/ m i n Threaded Sub-plate
Connection Mounting MPa (PSI) ( U . S . G P M ) Connection Mounting
HT-03-**-*-22/2280/2290 HG-03-**-*-22/2290 50 (13.2) 3.7 (8.2) 4.0 (8.8)
H Type Pressure
HT-06-**-*-22/2280/2290 HG-06-**-*-22/2290 21(3050) 125 (33) 6.2 (13.7) 6.1 (13.5)
Control Valves
HT-10-**-*-22/2280/2290 HG-10-**-*-22/2290 250 (66) 12.0 (26.5) 11.0 (24.3)
HCT-03-**-*-22/2280/2290 HCG-03-**-*-22/2290 50 (13.2) 4.1 (9.0) 4.8 (10.6)
HC Type Pressure
HCT-06-**-*-22/2280/2290 HCG-06-**-*-22/2290 21(3050) 125 (33) 7.1 (15.7) 7.4 (16.3)
Control Valves
HCT-10-**-*-22/2280/2290 HCG-10-**-*-22/2290 250 (66) 13.8 (30.4) 13.8 (30.4)

For check valve pressure drops of HC type, see free flow pressure drop characteristics described on page 247.

Yuken can offer flanged connection valves described below.

For details, contact us.

Max. Operating Max. flow

Model Numbers Pressure L/min
MPa (PSI) (U.S.GPM)

HF/HCF-10-**-*-22/2290 21 250(66)
HF/HCF-16-**-*-20/2090 (3050) 500(132)

H / HC Type Pressure Control Valves 237

 Model Number Designation
F- H T -03 -C 3 -P -22 *
1
Pres. Adj. With
Special Series Type of Valve Valve Design
Range Auxiliary Design Standards
Seals Number Mounting Size Type Number
MPa (PSI) Pilot Pressure
03 22
T: None: Japanese Std. "JIS"
Threaded 06 2 22 80: European Design Std.
H: Connection 1
90: N. American Design Std.
H Type 10 2 22
Pressure
F: Control 03 L: 0.25 - 0.45 3 22
Special Valves G: (36 - 65) None: Japanese Std. "JIS" &
Seals for 4
Sub-plate 06 M:0.45 - 0.9 22 European Design Std.
Phosphate Mounting (65 - 130) P: 3
Ester 90: N. American Design Std.
10 N: 0.9 - 1.8 With 22
Type Auxiliary
(130- 260)
Fluids Pilot
(Omit if 03 A: 1.8 - 3.5 22
T: (260- 510) Pressure None: Japanese Std. "JIS"
not
required) Threaded 06 B: 3.5 - 7.0 22 80: European Design Std.
HC: Connection (510- 1020) 1
90: N. American Design Std.
HC Type 10 C: 7.0 - 14 2 22
Pressure (1020 - 2030)
Control 03 3 22
Valves G: None: Japanese Std. "JIS" &
4
Sub-plate 06 22 European Design Std.
Mounting
90: N. American Design Std.
10 22

1. For the details of valve types, see the following page.

2. Type 1 is only possible for pressure adjustment ranges L and M.
3. Models with auxiliary pilots are used where valves must be operated under a lower external pilot pressure than the adjusted pressure (types N, A,
and B: about 1/8 of adjusted pressure; type C: about 1/16). This does not apply to pressure adjustment ranges L and M and valve type 1.

Instructions
To adjust the pressure, loosen the lock nut and turn the pressure adjustment screw slowly clockwise to increase pressures
or anti-clockwise to decrease pressures. After adjustments, do not forget to tighten the lock nut.
Connect the secondary side pressure ports of types 1 and 4 (internal drain) and the drain ports of types 2 and 3 (external
drain) directly to the reservoir with a back pressure close to the atmospheric pressure.
There are two threaded connection primary pressure ports. They can be connected each other in-line; one as inlet and
the other as an outlet or the valve can be used by plugging one of the pressure ports.

Sub-plate
Valve Japanese Standard "JIS" European Design Standard N.American Design Standard Approx.
Model Sub-plate Thread Sub-plate Thread Sub-plate Thread Mass
Numbers Model Numbers Size Model Numbers Size Model Numbers Size kg (lbs.)

HG -03- HGM-03-20 Rc 3/8 HGM-03-2080 3/8 BSP.F HGM-03-2090 3/8 NPT 1.6 (3.5)
HCG ** HGM-03X-20 Rc 1/2 HGM-03X-2080 1/2 BSP.F HGM-03X-2090 1/2 NPT 1.6 (3.5)

HG -03- -P HGM-03-P-20 Rc 3/8 HGM-03-P-2080 3/8 BSP.F HGM-03-P-2090 3/8 NPT 2.0 (4.4)
HCG ** HGM-03X-P-20 Rc 1/2 HGM-03X-P-2080 1/2 BSP.F HGM-03X-P-2090 1/2 NPT 2.0 (4.4)

HG -06- HGM-06-20 Rc 3/4 HGM-06-2080 3/4 BSP.F HGM-06-2090 3/4 NPT 2.4 (5.3)
HCG ** HGM-06X-20 Rc 1 HGM-06X-2080 1 BSP.F HGM-06X-2090 1 NPT 3.0 (6.6)

HG -06- -P HGM-06-P-20 Rc 3/4 HGM-06-P-2080 3/4 BSP.F HGM-06-P-2090 3/4 NPT 2.4 (5.3)
HCG ** HGM-06X-P-20 Rc 1 HGM-06X-P-2080 1 BSP.F HGM-06X-P-2090 1 NPT 3.0 (6.6)

HG -10- HGM-10-20 Rc 1-1/4 HGM-10-2080 1-1/4 BSP.F HGM-10-2090 1-1/4 NPT 4.8 (10.6)
HCG ** HGM-10X-20 Rc 1-1/2 HGM-10X-2080 1-1/2 BSP.F HGM-10X-2090 1-1/2 NPT 5.7 (12.6)

HG -10- -P HGM-10-P-20 Rc 1-1/4 HGM-10-P-2080 1-1/4 BSP.F HGM-10-P-2090 1-1/4 NPT 4.8 (10.6)
HCG ** HGM-10X-P-20 Rc 1-1/2 HGM-10X-P-2080 1-1/2 BSP.F HGM-10X-P-2090 1-1/2 NPT 5.7 (12.6)

Sub-plates are available. Specify the sub-plate model number from the table above. When sub-plates are not used, the mounting surface should have
a good machined finish.

238 H / HC Type Pressure Control Valves

 PRESSURE CONTROLS

Attachment
Mounting Bolts
Valve Model Socket Head Cap Screw
Qty.
Numbers Japanese Std. "JIS" and European Design Std. N. American Design Std.
HG-03 M10 50 Lg. 3/8 -16 UNC 2 Lg. 4
HG-06 M10 50 Lg. 3/8 -16 UNC 2 Lg. 4
HG-10
HCG-03
M10
M10
50 Lg.
70 Lg.
3/8 -16 UNC
3/8 -16 UNC
2 Lg.
2-3/4 Lg.
6
4
C
HCG-06 M10 80 Lg. 3/8 -16 UNC 3-1/4 Lg. 4
HCG-10 M10 90 Lg. 3/8 -16 UNC 3-1/2 Lg. 6

Valve Types
H Type

Pressure Control Valves

Type 1: Type 2: Type 3: Type 4:
Valve Type
Low Pres. Relief Valve Sequence Valve Sequence Valve Unloading Valve

H / HC Type
Pilot-Drain Type Internal Pilot-Internal Drain Internal Pilot-External Drain External Pilot-External Drain External Pilot-Internal Drain

Operations

1 1 1
8 8 8
Graphic Symbols
With auxiliary With auxiliary With auxiliary
pilot port pilot port pilot port

Can be used as low- Used to control the Used for the same Used as unloading valve.
pressure relief valve, but operational sequence of two purpose as for the type 2. If external pilot pressure
be careful to occurrence of or more actuators. If Operated by external pilot exceeds the pressure
Description surge pressure. primary pressure exceeds pressure irrespective of setting, the pump is turned
the pressure setting, primary pressure. no-load by releasing all
effective fluid is delivered fluid to the tank.
to the secondary side.

HC Type
Type 1: Type 2: Type 3: Type 4:
Valve Type
Counterbalance Valve Sequence and Check Valve Sequence and Check Valve Counterbalance Valve
Pilot-Drain Type Internal Pilot-Internal Drain Internal Pilot-External Drain External Pilot-External Drain External Pilot-Internal Drain

Operations

1 1 1 1
8 8 8 8
Graphic Symbols
With auxiliary With auxiliary With auxiliary With auxiliary
pilot port pilot port pilot port pilot port

Used to prevent gravitatio- Used to control the Used for the same purpose Used for the same purpose
nal falls by generating a operating sequence of two as for type 2. Operated by as for type 1. Operated by
pressure on the actuator or more actuators. If external pilot pressure external pilot pressure
return side. If primary primary pressure exceeds irrespective of primary irrespective of primary
Descriptions pressure exceeds the the pressure setting, pressure. Reversed flow is pressure. Reversed flow is
pressure setting, fluid is effective fluid is delivered free by a check valve. free by a check valve.
released to keep the pressure to the secondary side.
constant. Reversed flow is free by
a check valve.

H / HC Type Pressure Control Valves 239

 HT-03, 06, 10-**-*-22/2280/2290 DIMENSIONS IN
Type 3: Sequence Valve MILLIMETRES (INCHES)
(External Pilot, External Drain)
Thread Size
Model Numbers
"Q" Thd. "S" Thd. "T" Thd.
HT-03, 22 Rc 3/8
"C"SQ.

HT-06, 22 Rc 3/4 Rc 1/4 Rc 1/4

D
HT-10, 22 Rc 1-1/4

A
HT-03, 2280 3/8 BSP.F
HT-06, 2280 3/4 BSP.F 1/4 BSP.F 1/4 BSP.Tr
A Pressure Adjustment
B Screw HT-10, 2280 1-1/4 BSP.F
10 (.39) Hex.
HT-03, 2290 3/8 NPT
INC. HT-06, 2290 3/4 NPT 1/4 NPT 1/4 NPT
HT-10, 2290 1-1/4 NPT
Lock Nut
13 (.51) Hex.

Drain Port
Secondary Pressure "S" Thd.
Outlet Port
"Q" Thd.
Secondary Pressure
Fully Extended E

Gauge Connection
"T" Thd.
K

V
N
L
J

Primary Pressure
Primary Pressure Inlet Port
Gauge Connection
"T" Thd. "Q" Thd. 2 Places
External pilot port "X" Aux. Pilot Port "Y"
"S" Thd. "S" Thd.
(For "P" models only)

Dimensions mm (Inches)
Model Numbers
A B C D E F J K L N V
41 82 60 74 191 57 43 70 0 28 28
HT-03
(1.61) (3.23) (2.36) (2.91) (7.52) (2.24) (1.69) (2.76) (0) (1.10) (1.10)
48 96 73 87 221 64.5 50.5 80.5 9 33 42
HT-06
(1.89) (3.78) (2.87) (3.43) (8.70) (2.54) (1.99) (3.17) (.35) (1.30) (1.65)
66 132 86 112 272 84 66 98 12 40 52
HT-10
(2.60) (5.20) (3.39) (4.41) (10.71) (3.31) (2.60) (3.86) (.47) (1.57) (2.05)

Type 1: Low Pressure Relief Valve Type 2: Sequence Valve Type 4: Unloading Valve
(Internal Pilot, Internal Drain) (Internal Pilot, External Drain) (External Pilot, Internal Drain)

Plug Plug

Drain Port

Plug Plug External Pilot

Port

240 H / HC Type Pressure Control Valves

 PRESSURE CONTROLS

Mounting Surface
HG-03, 06-**-*-22/2290 Type 1: Low Pressure Relief Valve
HG-03: ISO 5781-AG-06-2-A (Internal Pilot, Internal Drain)
Type 3: Sequence Valve HG-06: ISO 5781-AH-08-2-A
(External Pilot, External Drain)
"A" SQ.

C
C

D
B

Pressure Adjustment Screw

10 (.39) Hex.
INC.
Lock Nut
13 (.51) Hex.
Type 2: Sequence Valve
(Internal Pilot, External Drain)
Secondary Pressure

Pressure Control Valves

Outlet Port
Drain Port
11(.43) Dia. Through
Fully Extended F

17.5(.69) Dia. Spotface

H / HC Type
4 Places
6(.24)
Drain Port
Locating Pin
6(.24) Dia.
External Pilot Port "X"
Mounting Surface
(O-Rings Furnished)
J

Primary Pressure
Type 4: Unloading Valve
Inlet Port
Aux. Pilot Port "Y" E K (External Pilot, Internal Drain)
(For "P" models only)

Dimensions mm (Inches)
Model Numbers
A B C D E F J K
60 67 35 39 89 191 49.6 38
HG-03
(2.36) (2.64) (1.38) (1.54) (3.50) (7.52) (1.95) (1.50)
External Pilot
73 79 40 39 102 221 51 38 Port
HG-06
(2.87) (3.11) (1.57) (1.54) (4.02) (8.70) (2.01) (1.50)

Mounting Surface Type 1: Low Pressure Relief Valve

HG-10-**-*-22/2290 (Internal Pilot, Internal Drain)
ISO 5781-AJ-10-2-A
Type 3: Sequence Valve
(External Pilot, External Drain)
DIMENSIONS IN
86(3.39) SQ.
MILLIMETRES (INCHES)
(1.54)
39
(1.81)
46
(3.62)
92

Pressure Adjustment Screw

10(.39) Hex. Type 2: Sequence Valve
(Internal Pilot, External Drain)
INC.

Lock Nut
13(.51) Hex.

Secondary Pressure
Drain Port Outlet Port Drain Port

11(.43) Dia. Through

Fully Extended

17.5(.69) Dia. Spotface

272(10.71)

4 Places
6 (.24)
Type 4: Unloading Valve
Locating Pin (External Pilot, Internal Drain)
6(.24) Dia.

Mounting Surface
(2.44)

External Pilot Port "X" (O-Rings Furnished)

62

Primary Pressure Inlet Port

Aux. Pilot Port "Y" 119 38 External Pilot

(For "P" models only) (4.69) (1.50) Port

H / HC Type Pressure Control Valves 241

 HCT-03, 06, 10-**-*-22/2280/2209 DIMENSIONS IN
Type 3: Sequence and Check Valve MILLIMETRES (INCHES)
(External Pilot, External Drain)
Thread Size
Model Numbers
"Q" Thd. "S" Thd. "T" Thd.
HCT-03, 22 Rc 3/8
HCT-06, 22 Rc 3/4 Rc 1/4 Rc 1/4
HCT-10, 22 Rc 1-1/4
"C"SQ.

HCT-03, 2280 3/8 BSP.F

D
HCT-06, 2280 3/4 BSP.F 1/4 BSP.F 1/4 BSP.Tr

A
HCT-10, 2280 1-1/4 BSP.F
HCT-03, 2290 3/8 NPT
A
Pressure Adjustment Screw HCT-06, 2290 3/4 NPT 1/4 NPT 1/4 NPT
B
10 (.39) Hex.
INC. HCT-10, 2290 1-1/4 NPT

Lock Nut
13 (.51) Hex.
Drain Port
"S" Thd.
Secondary Pressure Outlet Port
or Reversed Free Flow Inlet Port
"Q" Thd. Secondary Pressure
Gauge Connection
Fully Extended "E"

"T" Thd.
K

V
N
L
J

Primary Pressure
Gauge Connection
"T" Thd. Primary Pressure Inlet Port
or Reversed Free Flow Outlet Port
"Q" Thd. 2 Places Aux. Pilot Port "Y"
External Pilot Port "X"
"S" Thd.
"S" Thd. (For "P" models only)

Dimensions mm (Inches)
Model Numbers
A B C D E F J K L N V
41 82 60 96 191 57 43 70 0 28 28
HCT-03
(1.61) (3.23) (2.36) (3.78) (7.52) (2.24) (1.69) (2.76) (0) (1.10) (1.10)
48 96 73 116 221 64.5 50.5 80.5 9 33 42
HCT-06
(1.89) (3.78) (2.87) (4.57) (8.70) (2.54) (1.99) (3.17) (.35) (1.30) (1.65)
66 132 86 152 272 84 66 98 12 40 52
HCT-10
(2.60) (5.20) (3.39) (5.98) (10.71) (3.31) (2.60) (3.86) (.47) (1.57) (2.05)

Type 1: Counterbalance Valve Type 2: Sequence and Check Valve Type 4: Counterbalance Valve
(Internal Pilot, Internal Drain) (Internal Pilot, External Drain) (External Pilot, Internal Drain)

Plug Plug

Drain Port

Plug External Pilot

Plug Port

242 H / HC Type Pressure Control Valves

 PRESSURE CONTROLS

Mounting Surface
HCG-03, 06-**-*-22/2290 Type 1: Counterbalance Valve
HCG-03: ISO 5781-AG-06-2-A (Internal Pilot, Internal Drain)
Type 3: Sequence and Check Valve HCG-06: ISO 5781-AH-08-2-A
(External Pilot, External Drain)
C

"D" SQ.
B

C
A

Pressure Adjustment Screw

10 (.39) Hex. Lock Nut
INC. 13(.51) Hex.

Type 2: Sequence and Check Valve

Secondary Pressure Outlet Port (Internal Pilot, External Drain)
or Reversed Free Flow Inlet Port

Pressure Control Valves

Drain Port
Fully Extended "F"

11(.43) Dia. Through

17.5(.69) Dia. Spotface

H / HC Type
4 Places 6(.24)
Drain Port
Locating Pin
6(.24) Dia.
External Pilot Port "X" Mounting
Surface
(O-Rings
J

Primary Pressure Inlet Port Furnished) Type 4: Counterbalance Valve

or Reversed Free Flow (External Pilot, Internal Drain)
Auxiliary Pilot Port E Outlet Port K
(For "P" models only)

Dimensions mm (Inches)
Model Numbers
A B C D E F J K
90 59 35 60 89 191 49.6 58
HCG-03
(3.54) (2.32) (1.38) (2.36) (3.50) (7.52) (1.95) (2.28)
External Pilot
108 69 40 73 102 221 51 68 Port
HCG-06
(4.25) (2.72) (1.57) (2.87) (4.02) (8.70) (2.01) (2.68)

Mounting Surface Type 1: Counterbalance Valve

HCG-10-**-*-22/2290 (Internal Pilot, Internal Drain)
ISO 5781-AJ-10-2-A
Type 3: Sequence and Check Valve
(External Pilot, External Drain)
DIMENSIONS IN
MILLIMETRES (INCHES)
86 (3.39) SQ.
(1.81)
46
(3.11)
79
(5.20)
132

Type 2: Sequence and Check Valve

Pressure Adjustment Screw
(Internal Pilot, External Drain)
10(.39) Hex.
INC. Lock Nut
13(.51) Hex.

Secondary Pressure Outlet Port

or Reversed Free Flow Inlet Port
Drain Port Drain Port

11(.43) Dia. Through

Fully Extended

17.5(.69) Dia. Spotface

272(10.71)

6 Places 6 (.24) Type 4: Counterbalance Valve

(External Pilot, Internal Drain)
Locating Pin
6(.24) Dia.
External Pilot Port "X"
Mounting
(2.44)

Surface
62

(O-Rings
Furnished)
Primary Pressure Inlet Port External Pilot
Auxiliary Pilot Port 119 78
or Reversed Free Flow Port
(For "P" models only) (4.69) Outlet Port (3.07)

H / HC Type Pressure Control Valves 243

 HGM-03-20/2080/2090 DIMENSIONS IN
HGM-03X-20/2080/2090 MILLIMETRES (INCHES)
32
"A"Thd. (1.26)
2 Places 90 13(.51) Dia. 16
(3.54) 2 Places (.63)
"B"Thd.
2 Places 10 70 7(.28) Dia. 10(.39) Deep 15
(.39) (2.76) For Locating Pin (.59)
(4.02)

(3.23)

(.77) (1.69)

(3.54)
19.5 42.8
102

(.93) (1.41)
(1.25)
82

23.5 35.7

90
31.8
(2.40)

(.84)
21.4
61

(.83)

(.28)
7.1
21

4(.16) Dia.
(.39)
10

7.9 2 Places
(.31) "C" Thd. Sub-plate
8.8(.35) Dia. Through "A" Thd. "B" Thd. "C" Thd.
33.3 20(.79) Deep Model Numbers
14(.55) Dia. Spotface
(1.31) 4 Places
4 Places HGM-03-20 Rc 3/8
58.7 Rc 1/4
(2.31) HGM-03X-20 Rc 1/2
1.7 66.7 M10
(.07) (2.63) HGM-03-2080 3/8 BSP.F
1/4 BSP.F
HGM-03X-2080 1/2 BSP.F
HGM-03-2090 3/8 NPT
1/4 NPT 3/8-16 UNC
HGM-03X-2090 1/2 NPT

With Auxiliary Pilot Pressure Port

HGM-03-P-20/2080/2090
HGM-03X-P-20/2080/2090
90
(3.54)
10 70 "A"Thd. 36
2 Places
(.39) (2.76) (1.42)
D 16
13(.51) Dia. (.63)
11.5 2 Places
"B"Thd. 15
3 Places (.45) (.59)
7(.28) Dia. 10(.39) Deep
For Locating Pin
(4.02)

(3.23)

(.77) (1.69)
102

(1.41)
19.5 42.8
82

(1.25)
35.7
31.8
(.84)
21.4
(2.11)
E

53.5

(1.12)
28.5

(.28)
7.1
F

"C"Thd. 20(.79) Deep 4 Places

(.39)
10

7.9
4(.16) Dia. (.31) 8.8(.35) Dia. Through
3 Places 11 14(.55) Dia. Spotface 4 Places
(.43)
33.3 Sub-plate Thread Size Dimensions mm(Inches)
(1.31) Model Numbers "A" Thd. "B" Thd. "C" Thd. D E F
58.7 35 69.5 12.5
(2.31) HGM-03-P-20 Rc 3/8
(1.38) (2.74) (.49)
1.7 66.7 Rc 1/4
(.07) (2.63) 41 67.5 14.5
HGM-03X-P-20 Rc 1/2
(1.61) (2.66) (.57)
M 10
35 69.5 12.5
HGM-03-P-2080 3/8 BSP.F
(1.38) (2.74) (.49)
1/4 BSP.F
41 67.5 14.5
HGM-03X-P-2080 1/2 BSP.F
(1.61) (2.66) (.57)
35 69.5 12.5
HGM-03-P-2090 3/8 NPT
(1.38) (2.74) (.49)
1/4 NPT 3/8-16 UNC
41 67.5 14.5
HGM-03X-P-2090 1/2 NPT
(1.61) (2.66) (.57)

244 H / HC Type Pressure Control Valves

 PRESSURE CONTROLS

HGM-06-20/2080/2090 DIMENSIONS IN
HGM-06-P-20/2080/2090 36 MILLIMETRES (INCHES)
"A"Thd. 22(.87) Dia. (1.42)
2 Places 2 Places 16
"B"Thd. (.63)
2 Places 102 7(.28) Dia. 10(.39) Deep 15
(4.02) (.59)
For Locating Pin

C
(4.88)

(4.33)
(4.09)

(2.37)
124

110
60.3
104

(1.94)
(1.75)
49.2
(1.56)
44.5
(3.03)

39.7
77

(1.54)
E

(1.06)
39

27

(.81)
(.44)
20.6
11.1

(.87)
22
(.39)

(.28)
10

F 5(.20) Dia. 2 Places

Pressure Control Valves

"D" Thd. 6.4 "C" Thd. 20(.79) Deep
(.25) 4 Places
4(.16) Dia. 14

H / HC Type
(.55)
"HGM-06-P" 8.8(.35) Dia. Through
39.7
Auxiliary Pilot Pressure 14(.55) Dia. Spotface
(1.56)
Models Only 73 4 Places
(2.87) Sub-plate Thread Size Dimensions mm(Inches)
11.3 79.4
(.44) (3.13) Model Numbers "A" Thd. "B" Thd. "C" Thd. "D" Thd. E F
HGM-06-20 61.7 (2.43) 6.4 (.25)
Rc 3/4 Rc 1/4 Rc 1/4
HGM-06-P-20 64 (2.52) 3 (.12)
M10
HGM-06-2080 3/4 1/4 1/4 61.7 (2.43) 6.4 (.25)
HGM-06-P-2080 BSP.F BSP.F BSP.F 64 (2.52) 3 (.12)
HGM-06-2090 3/8-16 61.7 (2.43) 6.4 (.25)
3/4 NPT 1/4 NPT 1/4 NPT
HGM-06-P-2090 UNC 64 (2.52) 3 (.12)

HGM-06X-20/2080/2090
HGM-06X-P-20/2080/2090 45
"A"Thd. (1.77)
2 Places 102 16
"B"Thd. (4.02) 22(.87) Dia. (.63)
2 Places 11.3 75 2 Places 15
(.44) (2.95) 7(.28) Dia. 10(.39) Deep (.59)
For Locating Pin
(4.09)

(5.12)
(2.37)
(5.35)
104

60.3

130
(1.94)
136

(1.75)
(1.56)

49.2
44.5
39.7
(.81)
20.6
H

(.44)
11.1
(1.54)
39

(.87)
22
(.63)
16

F 5(.20) Dia. 2 Places

"D" Thd. 6.4 "C" Thd. 20(.79) Deep

(.25) 4 Places
4(.16) Dia. 14
(.55) 8.8(.35) Dia. Through
39.7 14(.55) Dia. Spotface
"HGM-06X-P"
(1.56) 4 Places
Auxiliary Pilot Pressure
73
Models Only
(2.87)
79.4
(3.13)
Sub-plate Thread Size Dimensions mm(Inches)
Model Numbers "A" Thd. "B" Thd. "C" Thd. "D" Thd. E F H J
HGM-06X-20 61.7 (2.43) 6.4 (.25) 82.3 22
Rc 1 Rc 1/4 Rc 1/4
HGM-06X-P-20 64 (2.52) 3 (.12) (3.24) (.87)
M10
HGM-06X-2080 1/4 1/4 61.7 (2.43) 6.4 (.25) 80 (3.15) 24 (.94)
1 BSP.F
HGM-06X-P-2080 BSP.F BSP.F 64 (2.52) 3 (.12) 82.3 (3.24) 22 (.87)
HGM-06X-2090 3/8-16 61.7 (2.43) 6.4 (.25) 80 (3.15) 24 (.94)
1 NPT 1/4 NPT 1/4 NPT
HGM-06X-P-2090 UNC 64 (2.52) 3 (.12) 82.3 (3.24) 22 (.87)

H / HC Type Pressure Control Valves 245

 HGM-10-20/2080/2090 DIMENSIONS IN
HGM-10-P-20/2080/2090 MILLIMETRES (INCHES)
140 45
(5.51) "A"Thd.
(1.77)
116 2 Places
"C" Thd. 20(.79) Deep 12 28(1.10) Dia.
20
6 Places (.47) (4.57) (.79)
E 2 Places
19
"B"Thd. 7(.28) Dia. 10(.39) Deep (.75)
2 Places For Locating Pin

(5.31)
(5.91)

(3.31)
(4.96)

84.1

135
150

126

(2.66)
(2.47)
(1.18)

(2.34)

67.5
(3.78)

62.7
59.5
(1.66)
30
96

42.1
(1.69)
43

(.66)

(.97)
16.7

24.6

(.83)
21
(.47)

(.30)
5(.20) Dia. 2 Places
12

7.5
4 11(.43) Dia. Through
(.16)
"D" Thd. 15 17.5(.69) Dia. Spotface
4 Places
4(.16) Dia. (.59) Sub-plate Thread Size mm(Inches)
48.4
Model Numbers "A" Thd. "B" Thd. "C" Thd. "D" Thd. E
(1.91)
11.6 92.9 13.6
HGM-10-20
(.46) (3.66) (.54)
Rc 1-1/4 Rc 1/4 Rc 1/4
9.6 96.8 9.6
"HGM-10-P" (.38) (3.81) HGM-10-P-20
(.38)
Auxiliary Pilot Pressure
120 M10
Models Only 13.6
(4.72) HGM-10-2080
1-1/4 1/4 1/4 (.54)
BSP.F BSP.F BSP.F 9.6
HGM-10-P-2080
(.38)
13.6
HGM-10-2090
1-1/4 3/8-16 (.54)
1/4 NPT 1/4 NPT
NPT UNC 9.6
HGM-10-P-2090
HGM-10X-20/2080/2090 (.38)
HGM-10X-P-20/2080/2090
140
(5.51)
12 116 50
(.47) (4.57) "A"Thd. (1.97)
F 2 Places 20
"C" Thd. 20(.79) Deep 28(1.10) Dia. (.79)
6 Places E 2 Places 19
"B"Thd. 7(.28) Dia. 10(.39) Deep (.75)
2 Places For Locating Pin
(6.97)

(4.96)

(3.31)
177

84.1
126

(6.57)
(2.66)
(2.47)
(4.09)

167
(2.34)

67.5
62.7
104

59.5
(1.66)
(.87)

42.1
22
(1.69)
43

(.66)

(.97)
16.7

24.6

(.83)
21

5(.20) Dia. 2 Places

(.20)
(1.00)

11(.43) Dia. Through

25.5

4
(.16) 17.5(.69) Dia. Spotface
15 4 Places
"D" Thd.
(.59) Sub-plate Thead Size mm(Inches)
4(.16) Dia. 48.4
Model Numbers "A" Thd. "B" Thd. "C" Thd. "D" Thd. E F
(1.91)
11.6 92.9 13.6 102.5
HGM-10X-20
(.46) (3.66) (.54) (4.04)
9.6 96.8
Rc 1-1/2 Rc 1/4 Rc 1/4
9.6 106
(.38) (3.81) HGM-10X-P-20
(.38) (4.17)
120 M10
"HGM-10X-P" 13.6 102.5
Auxiliary Pilot Pressure (4.72) HGM-10X-2080
1-1/2 1/4 1/4 (.54) (4.04)
Models Only BSP.F BSP.F BSP.F 9.6 106
HGM-10X-P-2080
(.38) (4.17)
13.6 102.5
HGM-10X-2090
1-1/2 3/8-16 (.54) (4.04)
1/4 NPT 1/4 NPT
NPT UNC 9.6 106
HGM-10X-P-2090
(.38) (4.17)

246 H / HC Type Pressure Control Valves

 PRESSURE CONTROLS

Pressure Drop for Reversed Free Flow

Hydraulic Fluid: Viscosity 35 mm2/s (164 SSU), Specific Gravity 0.850

HCT-03
PSI MPa
HCG-03
0.4
C
P
50

Pressure Drop
40 0.3
30 0.2
20
0.1
10
0 0
0 10 20 30 40 50 L/min

0 2.5 5.0 7.5 10.0 12.5 U.S.GPM

Pressure Control Valves

Flow Rate

H / HC Type
HCT-06
PSI MPa
HCG-06
0.4
P

50
Pressure Drop

40 0.3
30 0.2
20
0.1
10
0 0
0 25 50 75 100 125 L/min

0 5 10 15 20 25 30 U.S.GPM
Flow Rate

HCT-10
PSI MPa
HCG-10
0.6
P

80
0.5
Pressure Drop

60 0.4
40 0.3
0.2
20 0.1
0 0
0 50 100 150 200 250 L/min

0 10 20 30 40 50 60 U.S.GPM
Flow Rate

For any other viscosity, multiply the factors in the table below.
mm2/s 15 20 30 40 50 60 70 80 90 100
Viscosity
SSU 77 98 141 186 232 278 324 371 417 464
Factor 0.81 0.87 0.96 1.03 1.09 1.14 1.19 1.23 1.27 1.30

For any other specific gravity (G'), the pressure drop ( P') may be obtained from
the formula below.
P'= P (G'/0.850)

H / HC Type Pressure Control Valves 247

 Nominal Override Characteristics

Hydraulic Fluid: Viscosity 35 mm2/s (164 SSU), Specific Gravity 0.850

PSI MPa
PSI MPa H*/HC*-06-C
H*/HC*-03-C 2000 14
2000 14 12
1600
12 10
1600
10 H*/HC*-06-B
H*/HC*-03-B 1000 7
1000 7 6
800
6 5
800 600
5 4
H*/HC*-03-A H*/HC*-06-A
500 3.5 500 3.5
400 3.0 400 3.0
Secondary Pressure

Secondary Pressure
2.5 2.5
300 2.0 300 2.0
H*/HC*-03-N H*/HC*-06-N
300 2.0 300 2.0
200 1.5 200 1.5
1.0 1.0
H*/HC*-03-M H*/HC*-06-M
130 0.9 130 0.9
120 120
0.8 0.8
100 0.7 100 0.7
0.6 0.6
H*/HC*-03-L H*/HC*-06-L
70 70
60 0.45 60 0.45
0.35 0.35
40 0.25 40 0.25

0 0 10 20 30 40 50 L/min
0 0 25 50 75 100 125 L/min

0 2.5 5 7.5 10 12.5 U.S.GPM 0 5 10 15 20 25 30 U.S.GPM

Flow Rate Flow Rate

PSI MPa
H*/HC*-10-C
2000 14
12
1600
10
H*/HC*-10-B
1000 7
6
800
5
H*/HC*-10-A
500 3.5
3.0
400
Secondary Pressure

2.5
300 2.0
H*/HC*-10-N
300 2.0
200 1.5
1.0
H*/HC*-10-M
130 0.9
120
0.8
100 0.7
0.6
H*/HC*-10-L
70
60 0.45
0.35
40 0.25

0
0 50 100 150 200 250 L/min

0 10 20 30 40 50 60 U.S.GPM
Flow Rate

248 H / HC Type Pressure Control Valves

 PRESSURE CONTROLS

Spare Parts List

HT-03, 06, 10-**-*-22/2280/2290

HG-03, 06, 10-**-*-22/2290

A
C
6 8
14 2
7 29
26

Pressure Control Valves

31
11
38
23 4

H / HC Type
15 1
25
28 9 Section "A" for
24
3 16 HT-*-**-*-2280 Models
22
12
18
5

List of Seals
Part Numbers Quantity
Item Name of Parts HT -03 HT -06 HT -10
HG HG HG HT-* HG-*
22 O-Ring SO-NB-P4 SO-NB-P4 SO-NB-P4 3
23 O-Ring SO-NB-P6 SO-NB-P6 SO-NB-P6 4 4
24 O-Ring SO-NB-P9 SO-NB-P9 SO-NB-P9 1
25 O-Ring SO-NB-P9 SO-NB-P9 SO-NB-P9 2
26 O-Ring SO-NA-P11 SO-NA-P15 SO-NA-P20 1 1
28 O-Ring SO-NB-P18 SO-NB-P28 SO-NB-P32 2
29 O-Ring SO-NB-P22 SO-NB-P28 SO-NB-P36 2 2
31 Bonded Seal SG-FB-1/4 SG-FB-1/4 SG-FB-1/4 2

Used only for HG type with auxiliary pilot pressure (P).

Note: When ordering the seals, please specify the seal kit number from the table berow.

List of Seal Kits

Valve Model Numbers Seal Kit Numbers
HT-03-**-*-22/2280/2290 KS-HT-03-22
HT-06-**-*-22/2280/2290 KS-HT-06-22
HT-10-**-*-22/2280/2290 KS-HT-10-22
HG-03-**-22/2290 KS-HG-03-22
HG-03-**-P-22/2290 KS-HG-03-P-22
HG-06-**-22/2290 KS-HG-06-22
HG-06-**-P-22/2290 KS-HG-06-P-22
HG-10-**-22/2290 KS-HG-10-22
HG-10-**-P-22/2290 KS-HG-10-P-22

Note: No bonded seals are included in the seal kits.

H / HC Type Pressure Control Valves 249

 Spare Parts List

HCT-03, 06, 10-**-*-22/2280/2290

HCG-03, 06, 10-**-*-22/2290

8
6 16
A
19 2
7 29
26 4
23 31
14 30
28
20 21
12 25
1
13 24 Section "A" for

27 HCT-*-**-*-2280 Models
3 22

17 10 18
9
5

List of Seals
Part Numbers Quantity
Item Name of Parts HCT -03 HCT -06 HCT -10
HCG HCG HCG HCT-* HCG-*
22 O-Ring SO-NB-P4 SO-NB-P4 SO-NB-P4 3
23 O-Ring SO-NB-P6 SO-NB-P6 SO-NB-P6 4 4
24 O-Ring SO-NB-P9 SO-NB-P9 SO-NB-P9 1
25 O-Ring SO-NB-P9 SO-NB-P9 SO-NB-P9 2
26 O-Ring SO-NA-P11 SO-NA-P15 SO-NA-P20 1 1
27 O-Ring SO-NB-P12 SO-NB-P18 SO-NB-P22A 1 1
28 O-Ring SO-NB-P18 SO-NB-P28 SO-NB-P32 2
29 O-Ring SO-NB-P22 SO-NB-P28 SO-NB-P36 2 2
31 Bonded Seal SG-FB-1/4 SG-FB-1/4 SG-FB-1/4 2

Used only for HCG type with auxiliary pilot pressure (P).
Note: When ordering the seals, please specify the seal kit number from the table below.

List of Seal Kits

Valve Model Numbers Seal Kit Numbers
HCT-03-**-*-22/2280/2290 KS-HCT-03-22
HCT-06-**-*-22/2280/2290 KS-HCT-06-22
HCT-10-**-*-22/2280/2290 KS-HCT-10-22
HCG-03-**-22/2290 KS-HCG-03-22
HCG-03-**-P-22/2290 KS-HCG-03-P-22
HCG-06-**-22/2290 KS-HCG-06-22
HCG-06-**-P-22/2290 KS-HCG-06-P-22
HCG-10-**-22/2290 KS-HCG-10-22
HCG-10-**-P-22/2290 KS-HCG-10-P-22

Note: No bonded seals are included in the seal kits.

250 H / HC Type Pressure Control Valves