Scribd
Upload
56 views1 page

Power-Zwerge: Basic Machine

The document provides specifications for a basic machine for rootball harvesting and requirements for different power units. It lists the dimensions and weight of the basic machine and notes it has two scoops. It describes the hydraulic and control requirements for using the machine with a loader or excavator, requiring one extra hydraulic circuit, 160-200 bar pressure, 40 liter per minute flow, 1,500kg lift capacity and rear stabilizers. It provides similar specifications for using with a farm or vineyard tractor, requiring approximately 60HP and a lift mast with lateral slide and additional hydraulic controls and pump. It notes to inquire about special attachments.

Uploaded by

Jury Zanni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views1 page

Power-Zwerge: Basic Machine

The document provides specifications for a basic machine for rootball harvesting and requirements for different power units. It lists the dimensions and weight of the basic machine and notes it has two scoops. It describes the hydraulic and control requirements for using the machine with a loader or excavator, requiring one extra hydraulic circuit, 160-200 bar pressure, 40 liter per minute flow, 1,500kg lift capacity and rear stabilizers. It provides similar specifications for using with a farm or vineyard tractor, requiring approximately 60HP and a lift mast with lateral slide and additional hydraulic controls and pump. It notes to inquire about special attachments.

Uploaded by

Jury Zanni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

D

C
B
A

Power-
F Zwerge
NEW
E

OPTIMAL P 900
Basic Machine: upper rootball diameter, approx. A 95 cm (37”)
rootball depth, approx. B 45 cm (18”)
working height C 90 cm (36”)
working width, gate closed D 103 cm (40”)
working width, gate open E 195 cm (77”)
clearance between open gate F 95 cm (37”)
weight, empty 560 kg (1, 236 lbs.)
number of scoops 2

Types of Attachment:
Special Service attachment work in our factory

A Loader or Excavator
Reqirements for Power Unit:
1 extra hydraulic circuit at front, double-acting, for implements
hydraulic working pressure 160–200 bar (2,300 - 2,900 lbs./in 2)
oil flow 40 l per minute (11 GPM)
lift capacity 1,500 kg (3,300 lbs.)
rear stabilizers
type of attachment quick-change frame
controls 4 electro-hydraulic valves, electric switch

B Farm Tractor or Vineyard Tractor


Reqirements for Power Unit:
engine capacity, approx. 60 HP
type of attachment lift mast HG 1500 with lateral slide
controls 4 electro-hydraulic valves for basic machine
4 manual hydraulic valves for lift mast
auxiliary equipment PTO-driven hydraulic pump and oil depot

C For special attachment please enquire

Optimal-Vertrieb Opitz GmbH reserves the right to make changes in engineering, design and specifications

Optimal-Vertrieb Opitz GmbH


Eysölden M 41 · 91177 Thalmässing · Germany · Tel. +49 91 73 / 79 18-0 · Fax +49 91 73 / 79 18-49 · e-mail: [email protected] · Internet: www.opitz-optimal.com

You might also like