Python Exceptions Handling18
Python Exceptions Handling18
Advertisements
Python provides two very important features to handle any unexpected error in your
Python programs and to add debugging capabilities in them −
Exception
1
Base class for all exceptions
StopIteration
2
Raised when the next() method of an iterator does not point to any object.
SystemExit
3
Raised by the sys.exit() function.
StandardError
4
Base class for all built-in exceptions except StopIteration and SystemExit.
ArithmeticError
5
Base class for all errors that occur for numeric calculation.
6 OverflowError
FloatingPointError
7
Raised when a floating point calculation fails.
ZeroDivisionError
8
Raised when division or modulo by zero takes place for all numeric types.
AssertionError
9
Raised in case of failure of the Assert statement.
AttributeError
10
Raised in case of failure of attribute reference or assignment.
EOFError
11 Raised when there is no input from either the raw_input() or input() function
and the end of file is reached.
ImportError
12
Raised when an import statement fails.
KeyboardInterrupt
13
Raised when the user interrupts program execution, usually by pressing Ctrl+c.
LookupError
14
Base class for all lookup errors.
IndexError
15
Raised when an index is not found in a sequence.
KeyError
16
Raised when the specified key is not found in the dictionary.
17 NameError
Raised when an identifier is not found in the local or global namespace.
UnboundLocalError
EnvironmentError
19
Base class for all exceptions that occur outside the Python environment.
IOError
20 Raised when an input/ output operation fails, such as the print statement or the
open() function when trying to open a file that does not exist.
IOError
21
Raised for operating system-related errors.
SyntaxError
22
Raised when there is an error in Python syntax.
IndentationError
23
Raised when indentation is not specified properly.
SystemError
24 Raised when the interpreter finds an internal problem, but when this error is
encountered the Python interpreter does not exit.
SystemExit
25 Raised when Python interpreter is quit by using the sys.exit() function. If not
handled in the code, causes the interpreter to exit.
TypeError
27 ValueError
Raised when the built-in function for a data type has the valid type of
arguments, but the arguments have invalid values specified.
RuntimeError
28
Raised when a generated error does not fall into any category.
NotImplementedError
Assertions in Python
An assertion is a sanity-check that you can turn on or turn off when you are done with
your testing of the program.
Assertions are carried out by the assert statement, the newest keyword to Python,
introduced in version 1.5.
Programmers often place assertions at the start of a function to check for valid input, and
after a function call to check for valid output.
If the assertion fails, Python uses ArgumentExpression as the argument for the
AssertionError. AssertionError exceptions can be caught and handled like any other
exception using the try-except statement, but if not handled, they will terminate the
program and produce a traceback.
Example
Here is a function that converts a temperature from degrees Kelvin to degrees Fahrenheit.
Since zero degrees Kelvin is as cold as it gets, the function bails out if it sees a negative
temperature −
Live Demo
#!/usr/bin/python
def KelvinToFahrenheit(Temperature):
assert (Temperature >= 0),"Colder than absolute zero!"
return ((Temperature-273)*1.8)+32
print KelvinToFahrenheit(273)
print int(KelvinToFahrenheit(505.78))
print KelvinToFahrenheit(-5)
32.0
451
Traceback (most recent call last):
File "test.py", line 9, in <module>
print KelvinToFahrenheit(-5)
File "test.py", line 4, in KelvinToFahrenheit
assert (Temperature >= 0),"Colder than absolute zero!"
AssertionError: Colder than absolute zero!
What is Exception?
An exception is an event, which occurs during the execution of a program that disrupts the
normal flow of the program's instructions. In general, when a Python script encounters a
situation that it cannot cope with, it raises an exception. An exception is a Python object
that represents an error.
When a Python script raises an exception, it must either handle the exception immediately
otherwise it terminates and quits.
Handling an exception
If you have some suspicious code that may raise an exception, you can defend your
program by placing the suspicious code in a try: block. After the try: block, include an
except: statement, followed by a block of code which handles the problem as elegantly as
possible.
Syntax
Here is simple syntax of try....except...else blocks −
try:
You do your operations here;
......................
except ExceptionI:
If there is ExceptionI, then execute this block.
except ExceptionII:
If there is ExceptionII, then execute this block.
......................
else:
If there is no exception then execute this block.
A single try statement can have multiple except statements. This is useful when
the try block contains statements that may throw different types of exceptions.
You can also provide a generic except clause, which handles any exception.
After the except clause(s), you can include an else-clause. The code in the else-
block executes if the code in the try: block does not raise an exception.
The else-block is a good place for code that does not need the try: block's
protection.
Example
This example opens a file, writes content in the, file and comes out gracefully because
there is no problem at all −
Live Demo
#!/usr/bin/python
try:
fh = open("testfile", "w")
fh.write("This is my test file for exception handling!!")
except IOError:
print "Error: can\'t find file or read data"
else:
print "Written content in the file successfully"
fh.close()
Example
This example tries to open a file where you do not have write permission, so it raises an
exception −
Live Demo
#!/usr/bin/python
try:
fh = open("testfile", "r")
fh.write("This is my test file for exception handling!!")
except IOError:
print "Error: can\'t find file or read data"
else:
print "Written content in the file successfully"
try:
You do your operations here;
......................
except:
If there is any exception, then execute this block.
......................
else:
If there is no exception then execute this block.
This kind of a try-except statement catches all the exceptions that occur. Using this kind
of try-except statement is not considered a good programming practice though, because it
catches all exceptions but does not make the programmer identify the root cause of the
problem that may occur.
try:
You do your operations here;
......................
except(Exception1[, Exception2[,...ExceptionN]]]):
If there is any exception from the given exception list,
then execute this block.
......................
else:
If there is no exception then execute this block.
try:
You do your operations here;
......................
Due to any exception, this may be skipped.
finally:
This would always be executed.
......................
You cannot use else clause as well along with a finally clause.
Example
#!/usr/bin/python Live Demo
try:
fh = open("testfile", "w")
fh.write("This is my test file for exception handling!!")
finally:
print "Error: can\'t find file or read data"
If you do not have permission to open the file in writing mode, then this will produce the
following result −
try:
fh = open("testfile", "w")
try:
fh.write("This is my test file for exception handling!!")
finally:
print "Going to close the file"
fh.close()
except IOError:
print "Error: can\'t find file or read data"
When an exception is thrown in the try block, the execution immediately passes to the
finally block. After all the statements in the finally block are executed, the exception is
raised again and is handled in the except statements if present in the next higher layer of
the try-except statement.
Argument of an Exception
An exception can have an argument, which is a value that gives additional information
about the problem. The contents of the argument vary by exception. You capture an
exception's argument by supplying a variable in the except clause as follows −
try:
You do your operations here;
......................
except ExceptionType, Argument:
You can print value of Argument here...
If you write the code to handle a single exception, you can have a variable follow the name
of the exception in the except statement. If you are trapping multiple exceptions, you can
have a variable follow the tuple of the exception.
This variable receives the value of the exception mostly containing the cause of the
exception. The variable can receive a single value or multiple values in the form of a tuple.
This tuple usually contains the error string, the error number, and an error location.
Example
Following is an example for a single exception −
Live Demo
#!/usr/bin/python
Raising an Exceptions
You can raise exceptions in several ways by using the raise statement. The general syntax
for the raise statement is as follows.
Syntax
raise [Exception [, args [, traceback]]]
Here, Exception is the type of exception (for example, NameError) and argument is a value
for the exception argument. The argument is optional; if not supplied, the exception
argument is None.
The final argument, traceback, is also optional (and rarely used in practice), and if present,
is the traceback object used for the exception.
Example
An exception can be a string, a class or an object. Most of the exceptions that the Python
core raises are classes, with an argument that is an instance of the class. Defining new
exceptions is quite easy and can be done as follows −
Note: In order to catch an exception, an "except" clause must refer to the same exception
thrown either class object or simple string. For example, to capture above exception, we
must write the except clause as follows −
try:
Business Logic here...
except "Invalid level!":
Exception handling here...
else:
Rest of the code here...
User-Defined Exceptions
Python also allows you to create your own exceptions by deriving classes from the
standard built-in exceptions.
In the try block, the user-defined exception is raised and caught in the except block. The
variable e is used to create an instance of the class Networkerror.
class Networkerror(RuntimeError):
def __init__(self, arg):
self.args = arg
So once you defined above class, you can raise the exception as follows −
try:
raise Networkerror("Bad hostname")
except Networkerror,e:
print e.args
Advertisements
FAQ's Cookies Policy Contact
© Copyright 2018. All Rights Reserved.