Scribd
Upload
63 views

How To Solve Problems Using Dimensional Analysis

Dimensional analysis is a process that uses unit conversions to solve measurement problems. There are several key steps: 1) Conversion ratios must equal one and can be written with either value on top. 2) Conversions are often written using "per" but can be rewritten as ratios. 3) Set up conversions to cancel out original units and arrive at desired units, labeling each step. Solve by multiplying numerators and dividing denominators.

Uploaded by

Dawit Kefelegn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views

How To Solve Problems Using Dimensional Analysis

Dimensional analysis is a process that uses unit conversions to solve measurement problems. There are several key steps: 1) Conversion ratios must equal one and can be written with either value on top. 2) Conversions are often written using "per" but can be rewritten as ratios. 3) Set up conversions to cancel out original units and arrive at desired units, labeling each step. Solve by multiplying numerators and dividing denominators.

Uploaded by

Dawit Kefelegn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

How to Solve Problems Using Dimensional Analysis

Dimensional analysis is a process that uses conversions to solve problems. There are several points to remember
when solving problems using this method:

1. The conversion ratios must equal one, and can be written with either value on top:

Example: 1 km = 1000 m 1 km = 1 or 1000 m = 1


1000 m 1 km

2. Conversions are often written using the word per. These can be re-written as ratios:

Example: 1000 m per km 1 km = 1 or 1000 m = 1


1000 m 1 km

3. Most important rules to remember:

Set up your conversion ratio to cancel out the original unit and convert to the desired unit. This means if
the unit you are converting from is in the numerator, the conversion ratio should be set up with this unit in the
denominator. This will cancel out the unit you are converting. Keep doing this until you get to units you want for
your answer.

Always label units for each step. This will help ensure you do not make mistakes.

Cross out units that have been canceled out and make sure that your final answer has been correctly
converted to the new unit.

4. Solve by multiplying all the numbers in the numerators of the ratios and then dividing by all the numbers in the
denominator of the ratios.

Example: How many miles has a person run if he runs a 5 km race?


Conversion factors: 1 km = 0.62 mi

Answer: 5 km x 0.62 mi = 3.1 mi


1 km

Example: How many kilometers per liter will a car get if it gets 30 mi/gal?
Conversion factors: 1 km = 0.62 mi , 1 liter = 0.26 gallons

Answer: 30 mi x 1 km x 0.26 gal = 12.6 km


gal 0.62 mi 1L L

Continued
More Dimensional Analysis Tips

When starting to solve a dimensional analysis problem, focus on what the units are for the final answer.

Example:
Your car’s average gas mileage is 20 miles/ gallon and you drive an average of 15,000 miles/year. How many
gallons of gas do you use per year?
In this problem, you don’t want to start with the miles per gallon ratio, because it has gallons in the denominator
and your answer will be in gallons/year, with gallons in the numerator.
Instead start with 15,000 miles/year because it has years in the denominator.

The ratio 20 miles per gallon can be inverted as needed to cancel out the appropriate units. If your car gets 20
miles per gallon, it also uses 1 gallon per 20 miles.

15,000 miles x 1 gallon = 750 gallons/year


year 20 miles

You might also like