Scribd
Upload
463 views10 pages

Dinmjg

This document contains 24 questions related to kinematics, dynamics, and collisions involving objects moving in one or two dimensions. The questions cover topics such as determining angular velocity and acceleration of connected objects, speeds before and after collisions with given coefficients of restitution, distances and times related to objects sliding or moving together due to forces. All questions can be solved using kinematic equations and principles of conservation of energy, momentum, and rotational motion.

Uploaded by

haker linkis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
463 views10 pages

Dinmjg

This document contains 24 questions related to kinematics, dynamics, and collisions involving objects moving in one or two dimensions. The questions cover topics such as determining angular velocity and acceleration of connected objects, speeds before and after collisions with given coefficients of restitution, distances and times related to objects sliding or moving together due to forces. All questions can be solved using kinematic equations and principles of conservation of energy, momentum, and rotational motion.

Uploaded by

haker linkis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Q1/ The hydraulic cylinder is extending with the velocity and acceleration

shown in figure. Determine the angular acceleration of crank AB and link BC


at the instant shown.

Q2/ Member AB has the angular motions shown. Determine the angular
velocity and angular acceleration of members CB and DC.

Q3/ The slider block has the motion shown. Determine the angular velocity and
angular acceleration of the wheel at this instant.
Q4/ In the position shown, bar AB has an angular velocity of 4 rad/s clockwise.
Determine the angular velocity of bars BD and DE.

Q5/ If member AB has the angular motion shown, determine the velocity and
acceleration of point C at the instant shown.
Q6/ Knowing that at the instant shown bar AB has a constant angular velocity
of 4 rad/s clockwise, determine the angular acceleration (a) of bar BD, (b) of
bar DE.

Q7/ At the instant ωA = 5 rad/s, pulley A is given an angular acceleration


α = (0.8θ) rad/s2, where θ is in radians. Determine the magnitude of acceleration
of point B on pulley C when A rotates 3 revolutions. Pulley C has an inner hub
which is fixed to its outer one and turns with it.
Q8/ Ring C has an inside radius of 55 mm and an outside radius of 60 mm and
is positioned between two wheels A and B, each of 24-mm outside radius.
Knowing that wheel A rotates with a constant angular velocity of 300 rpm and
that no slipping occurs, determine (a) the angular velocity of the ring C and of
wheel B, (b) the acceleration of the Points of A and B which are in contact with
C.

Q9/ The 15-kg block A slides on the surface for which µk = 0.3. The block has a
velocity v = 10 m/s when it is s = 4 m from the 10-kg block B. If the unstretched
spring has a stiffness k = 1000 N/m, determine the maximum compression of
the spring due to the collision. Take e = 0.6.
Q10/ Disks A and B have a mass of 15 kg and 10 kg, respectively. If they are
sliding on a smooth horizontal plane with the velocities shown, determine their
speeds just after impact. The coefficient of restitution between them is e = 0.8.

Q11/ The three balls each have a mass m. If A has a speed just before a direct
collision with B, determine the speed of C after collision. The coefficient of
restitution between each ball is e. Neglect the size of each ball.

Q12/At an amusement park there are 200-kg bumper cars A, B, and C that have
riders with masses of 40 kg, 60 kg, and 35 kg respectively. Car A is moving to
the right with a velocity υA = 2 m/s and car C has a velocity υB =1.5 m/s to the
left, but car B is initially at rest. The coefficient of restitution between each car
is 0.8. Determine the final velocity of each car, after all impacts, assuming (a)
cars A and C hit car B at the same time, (b) car A hits car B before car C does.
Q13/ Two identical balls A and B of mass m are suspended from cords of length
L/2 and L, respectively. Ball A is released from rest when ϕ = 90ͦ and swings
down to ϕ = 0ͦ , where it strikes B. Determine the speed of each ball just after
impact and the maximum angle θ through which B will swing. The coefficient
of restitution between the balls is e.

Q14/ The towing force acting on the 400-kg safe varies as shown on the graph.
Determine its speed, starting from rest, when t = 8 s. How far has it traveled
during this time?
Q15/ The balloon has a total mass of 400 kg including the passengers and
ballast. The balloon is rising at a constant velocity of 18 km/h when h = 10 m.
If the man drops the 40-kg sand bag, determine the velocity of the balloon when
the bag strikes the ground. Neglect air resistance.

Q16/ The 2.5-Mg pickup truck is towing the 1.5-Mg car using a cable as shown.
If the car is initially at rest and the truck is coasting with a velocity of 30 km/h
when the cable is slack, determine the common velocity of the truck and the car
just after the cable becomes taut. Also, find the loss of energy.

Q17/ The 20-g bullet is traveling at 400 m/s when it becomes embedded in the
2-kg stationary block. Determine the distance the block will slide before it stops.
The coefficient of kinetic friction between the block and the plane is µk = 0.2.
Q18/ The 30-Mg freight car A and 15-Mg freight car B are moving towards
each other with the velocities shown. Determine the maximum compression of
the spring mounted on car A. Neglect rolling resistance.

Q19/The two disks A and B have a mass of 3 kg and 5 kg, respectively. If they
collide with the initial velocities shown, determine their velocities just after
impact. The coefficient of restitution is e = 0.65.

Q20/ Two smooth disks A and B have the initial velocities shown just before
they collide. If they have masses mA = 4 kg and mB = 2 kg, determine their speeds
just after impact. The coefficient of restitution is e = 0.8.
Q21/ The 40-kg package is thrown with a speed of 4 m/sec onto the cart having
a mass of 20 kg. If it slides on the smooth surface and strikes the spring,
determine the velocity of the cart at the instant the package fully compresses
the spring. What is the maximum compression of the spring? Neglect rolling
resistance of the cart.

Q22/ A 4-kg projectile travels with a horizontal velocity of 600 m/sec before it
explodes and breaks into two fragments A and B of mass 1.5 kg and 2.5 kg,
respectively. If the fragments travel along the parabolic trajectories shown,
determine the magnitude of velocity of each fragment just after the explosion
and the horizontal distance where segment A strikes the ground at C.
Q23/ Block A has a mass of 2 kg and slides into an open ended box B with a
velocity of 2 m/sec. If the box B has a mass of 3 kg and rests on top of a plate P
that has a mass of 3 kg, determine the distance the plate moves after it stops
sliding on the floor. Also, how long is it after impact before all motion ceases?
The coefficient of kinetic friction between the box and the plate is µk= 0.2 and
between the plate and the floor µk= 0.4. Also, the coefficient of static friction
between the plate and the floor is µs= = 0.5.

Q24/ The 2-kg ball is thrown so that it travels horizontally at 10 m/sec when it
strikes the 6-kg block as it is traveling down the inclined plane at 1m/sec . If the
coefficient of restitution between the ball and the block is e = 0.6, determine the
speeds of the ball and the block just after the impact. Also, what distance does
B slide up the plane before it momentarily stops? The coefficient of kinetic
friction between the block and the plane is µk = 0.4.

You might also like