Dynasol - Emulsion Brochure

Resilience
The art of adapting

to the environment
in speed and endurance
EMULSION
EMULSION
The production site is located in Altamira, Tamaulipas. Mexico
with a capacity of 130,000 TPY SBR and NBR.
Dynasol Group has a JV in China located in Nanjing Jiangsu

province with a production capacity of 30,000 TPY of NBR.
The main markets we serve are tire, tire retread, automotive,

seals, under carpet, FDA seals, conveyor belts, chewing gum,
hose, rolls, insulate, plastic, friction, technical articles,
adhesives, shoes, molded parts, mats, O-ring, paper and textile
coating.
EMULSION SBR
EMULSION SBR
Cold SBR Emulprene Oil Extended SBR Emulprene

Emulprene cold is a styrene –butadiene copolymer produced mulprene il xtended product portfolio offers different
by a cold (5 to 10 °C) polymerization using fatty and rosin acid types which ful ll the actual re uirements for the tire industry
as emulsi er, coagulated y salt acid system and sta ili ed in regard of environment friendly oils. ifferent sta ili ation
with a non staining antioxidant. hese polymers offers good systems allows to use the products in color sensitive applica
mechanical properties, a rasion and tear resistance and are tions. hey are used in the manufacture of tires, retreading,
widely used in tires, retread, footwear soles, hoses, tu es, conveyor elts, hoses, mechanical goods for its excellent
conveyor elts and a great variety of molded and extruded processing properties.
mechanical goods.
HSR Emulprene CBMB Emulblack

Carbon black masterbatch
he igh Styrene aster atch is excellent for improving
hardness and stiffness in oor tiles, shoe soles, rolls sporting ffers excellent physical properties and outstanding
goods, extrusion and hard ru er compounds. hey provide processing characteristics due to the complete dispersion of
reinforcement to , , , N , S , I , and natural the car on lac and processing oil in the polymer. Is recom
ru er, increasing hardness, rigidity, a rasion, and tear mended for use in tires, tread ru er and molded and
resistance. extruded mechanical goods.
Latex SBR Arlatex SMB Emulsil

Silica masterbatch
rlatex is a water dispertion of copolymer of styrene utadi
ene made y emulsion polymeri ation it could e car oxylic his product line is a uni ue family of patented products
or not. It is used in applications such as carpets, textile and designed to serve a wide range of silica ru er applications,
paper coating. including assenger tires, ruc us tires, ff oad tires,
onveyor elts rollers, ootwear soles and other industrial
ru er goods.
20
HSBR Emulprene HSBR Emulprene
Non-Crosslinked Crosslinked
Are used in the manufacture of a variety of adhesives and roduce adhesive and sealants with a non stringy, uttery
sealants. hese linear, non crosslin ed polymers produce an consistency. hey are particularly useful for caul ing
excellent tac for onding, coating and sealing applications. compounds, mastics and spraya le adhesives. esides the
roduct is availa le in several grades, providing a wide range conventional ale form, several of these polymers are
of solu ility and viscosity, cohesive strength and holding availa le in crum form. hese fase dissolving, low solution
power can e achieved. viscosity crum polymers can help to reduce mixing time, use
less solvent and coat faster.
21
EMULSION SBR
APPLICATION GUIDE
SBR PRODUCT
Type Brand Grade Bound PH Black Oil ML UMS ASH Brookfield Black Silica Solids
styrene (%) type (%) viscosity (cps) PHR PHR content (%)
Cold SBR Emulprene 1500 23.5 52

Cold SBR Emulprene 1500A 23.5 52
Cold SBR Emulprene 1502CR 23.5 50
Cold SBR Emulprene 10140 21 24.5
Oil Extended SBR Emulprene 1712 23.5 HAO 46

Oil Extended SBR Emulprene 1723 23.5 TDAE 48
Oil Extended SBR Emulprene 1732 32.0 NAPH 46
Oil Extended SBR Emulprene 1778 23.5 NAPH 48
Oil Extended SBR Emulprene 1778R 27.3 NAPH 48
Oil Extended SBR Emulprene 1783 23.5 RAE 48
HSBR Emulprene 1006 23.5 50

HSBR Emulprene 1006CR 23.5 49
HSBR Emulprene 1009L 23.5 85
HSBR Emulprene 1009LCR 23.5 85
HSBR Emulprene 10101A 43.5 115
HSBR Emulprene 1011AH 23.5 55
HSBR Emulprene 1011AL 23.5 48
HSBR Emulprene 1013A 43 45
HSBR Emulprene 1013ACR 43 45
HSBR Emulprene 1028A 47.5 57
HSBR Insagum 1027 22 - 26 47 - 57

HSBR Insagum 1028 45 - 50 52 - 64
HSR Emulprene 260 64 1.0 MAX

HSR Emulprene 261 66 1.0 MAX
Latex SBR Arlatex 1185E 7.2 - 8.0 300 max 49 - 51

Latex SBR Arlatex 1372R 9.0 - 9.4 500 max 52 - 53
Latex SBR Arlatex 1490E 9.5 - 12.0 200 max 38 min
Latex SBR Arlatex 1919NC 8.0 - 9.0 100 max 45 - 49
CBMB Emulblack 1606R 23.5 N330 65+/-10 52

CBMB Emulblack 1608 23.5 N220 70+/-10 52
CBMB Emulblack 1847K 23.5 N339 55+/-10 75
CBMB Emulblack 1848 23.5 N339 55+/-10 82.5
CBMB Emulblack 3651 23.5 N234 60+/-10 52
SMB Emulsil 4773R 36.5 RAE 95 70

SMB Emulsil 4773T 36.5 TDAE 95 70
SMB Emulsil 1671R 23.5 RAE 140 60
SMB Emulsil 1671N 23.5 NAPH TBD 60
SMB Emulsil 1671 23.5 HAO 150 60
SMB Emulsil 4793T 36.5 TDAE 110 70
22
APPLICATION
Tires Sponge Seals Hoses Footwear Rolls Custom Adhesives Mechanical Friction Chewing Textile Carpet Paper Asphalt
mix goods gum coating saturation modification
23
COLD SBR | EMULPRENE
Brand Description Uses Styrene ML 1+4
Grade (%) 100°C
Emulprene Emulprene 1500 is a styrene-butadiene copolymer, cold Is widely used as raw material in tire, suitable for molded and 23.5 52
1500 polymerized using a rosin acid soap. Previously to the salt acid extruded mechanical goods.
coagulation, a non-staining stabilizer is added in the manufac-
turing process. The product does not contain nitrosamine
promoters.
Emulprene Emulprene 1500A is a styrene-butadiene copolymer, cold Suitable for molded and extruded mechanical goods and 23.5 52
1500A polymerized using a rosin acid soap. Previously to the alum-acid sealants applications.
coagulation, a non-staining stabilizer is added in the manufac-
turing process. The product does not contain nitrosamine
promoters.
Emulprene Emulprene 1502 is a styrene-butadiene copolymer, cold Widely used as raw material in tire, shoe sole and in various 23.5 50
1502 emulsion polymerized with fatty acid and rosin acid as industrial products.
emulsifier, coagulated by salt-acid system and stabilized with a
non-staining antioxidant.
Emulprene Emulprene 1502A is a styrene-butadiene copolymer, cold Suitable for natural rubber in wide range of compounds, 23.5 36
1502A polymerized using a rosin acid soap. Previously to the alum-acid offering advantages of light colour , uniformity and low levels
coagulation, a non-staining stabilizer is added in the manufac- of impurities. It s good flow characteristics produce
turing process. The product does not contain nitrosamine improvements in mixing and moulding behavior , It is used
promoters. for food and pharmaceutical packaging and seals, baby bottle
teats and health care, adhesives, chemical derivatives of
rubbers.
Emulprene Emulprene 1502CR is a particulated styrene-butadiene Is widely used like raw material in neumatics, heels, Shoe 23.5 50
1502CR copolymer, cold polymerized using fatty acid as emulsifer, soles and for the production of transparent goods, and light
coagulated with salt-acid and stabilized with a non staining colors, in particulated form is used for the manufacturing of
antioxidant. This rubber is produced as free flowing dusted adhesives.
crumb which eliminates the need for size reduction equipment.
Between 4 and 12 % of calcium carbonate is used as dusting
agent.
Emulprene Emulprene 1509 is a styrene-butadiene copolymer, cold Widely used in tire, heel and shoe sole formulations as well 23.5 36
1509 emulsion polymerized with fatty acid as emulsifier, coagulated as in a vast array of industrial products.
by salt-acid system and stabilized with a non-staining
antioxidant.
Emulprene Emulprene 1509A is a copolymer styrene-butadiene, cold Is recommended for mechanical goods and sealing 23.5 35
1509A emulsion polymerized used fatty acid as emulsifier, coagulated applications.
by alum-acid system and stabilized with a non staining
antioxidant.
Emulprene Emulprene 10140 is a product manufactured by mixing a cold The masterbach provides the user with an advantage through 21 24.5
10140 styrene-butadiene copolymer containing 5.5% bound styrene ease of processing and improved product quality, and it
(80%) with high styrene resin latex (20%), coagulated by salt - provides the stiffening effect to the final product. Uses: tires,
acid system and stabilized with a non-staining antioxidant. footwear, sponges, other mechanical goods, etc.
OIL EXTENDED SBR | EMULPRENE

Grade (%) 100°C
Emulprene Emulprene 1712 is a copolymer styrene-butadiene cold Used in tire formulations and in a variety of industrial 23.5 46
1712 emulsion polymerized used fatty acid as emulsifier, coagulated products due to its excellent adhesion and processing
by salt-acid system and it is extended utilizing aromatic oil. properties.
Emulprene Emulprene 1723 is a copolymer styrene-butadiene cold Is used in the manufacture of tires and industrial products for 23.5 48
1723 emulsion polymerized used fatty and rosin acid as emulsifier, its excellent processing properties.
coagulated by salt-acid system and it is extended utilizing TDAE
(Treated Distillate Aromatic Extract) an environmental friendly
oil which comply with the EU directives.
Emulprene Emulprene 1732 is a copolymer styrene-butadiene, cold Is used in the manufacture of tires and industrial products for 32 46
1732 emulsion polymerized used fatty acid as emulsifier, coagulated its excellent processing properties.
by salt-acid system and it is extended utilizing naphthenic oil.
24
Grade (%) 100°C
Emulprene Emulprene 1778 is a copolymer styrene-butadiene, cold Used in the manufacture of tires and industrial products for 23.5 48
1778 emulsion polymerized used fatty acid as emulsifier, coagulated its excellent processing properties.
by salt-acid system and it is extended utilizing napthenic oil.
Emulprene Emulprene 1778R is a cold emulsion styrene-butadiene Is used in the manufacture of tires and industrial products for 27.3 48
1778R copolymer, polymerized using fatty acid and rosin acid as its excellent processing properties.
emulsifier, coagulated by salt-acid system and it is extended
utilizing naphthenic oil and meets the European directive
2005/69/EC.
Emulprene Emulprene 1783 is a copolymer styrene-butadiene cold Is used in the manufacture of tires, retreading, conveyor belts, 23.5 48
1783 emulsion polymerized used fatty and rosin acid as emulsifier, hoses, mechanical goods for its excellent processing
coagulated by salt-acid system and it is extended utilizing RAE properties.
(Residual Aromatic Extract) an environmental friendly oil which
comply with the EU directives.
HSBR | EMULPRENE
Grade (%) 100°C
Emulprene Emulprene 1006 is a hot emulsion styrene-butadiene Recommended for light colored; for adhesives, tire white 23.5 50
1006 copolymer, polymerized using a fatty acid emulsifier and sidewalls, transport and transmission belts, sponge
coagulated with salt-acid. It is a very light color product stabilized materials, sporting goods, flooring, colored shoe soles and
with a non-staining antioxidant. heels.
Emulprene Emulprene 1006CR is a crumb hot emulsion styrene-butadiene Is recommended for light colored applications; for adhesives, 23.5 49
1006CR copolymer, polymerized using a fatty acid emulsifier and tire white sidewalls, transport and transmission belts, sponge
coagulated with salt-acid. It is a very light color product stabilized materials, sporting goods, flooring, colored shoe soles and
with a non-staining antioxidant, and presented as free flowing heels.
dusted crumb which eliminates the end for size reduction
equipment. Between 7% and 12% of Calcium Carbonate is used
as dusting agent.
Emulprene Emulprene 1009L is a hot emulsion styrene-butadiene Is a lower gel version of the E1009H it also reduces mill 23.5 85
1009L copolymer, slightly cross-linked with divinylbenzene. It is shrinkage and swelling in molding improving dimensional
polymerized using fatty acid as emulsifier, coagulated with salt stability and outstanding surface texture of finished products.
acid and stabilized with a non-staining. antioxidant. It is also widely used in sealants and adhesives giving good
balance between adhesive and cohesive properties.
Emulprene Emulprene 1009LCR is a crumb hot emulsion styrene-butadiene Dissolves easily in solvents, being widely used as main 23.5 85
1009LCR copolymer, slightly cross-linked with divinylbenzene. It is ingredient for solvent based general purpose pressure-sensi-
polymerized using fatty acid as emulsifier , coagulated with salt tive, aerosol, spray and laminating adhesives . It can also be
acid and stabilized with a non-staining. antioxidant. This rubber used in caulks and sealants.
is produced as free flowing dusted crumb which eliminates the Storage.
need for size reduction equipment. Between 7-12 % of Calcium
carbonate is used as dusting agent.
Emulprene Emulprene 10101A is a cross-linked emulsion styrene-butadi- Gives excellent dimensional stability to compounds, reduces 43.5 115
10101A ene copolymer with divinyl-benzene, using a mix of rosin and die swell and shrinkage in extruded products. It is also
fatty acid as emulsifier. It is coagulated with Aluminum-acid and recommended for improving cohesive strength in adhesives
stabilized with a non-staining antioxidant. It is produced in and sealants which will be in contact with food or beverages.
accordance with good manufacturing practices and complies
with FDA 21 CFR §175.300, §177.1210 and §178.3910 for use in
food contact applications.
Emulprene Emulprene 1011 is a hot emulsion styrene-butadiene copolymer Gives excellent green tack and adhesive properties with good 23.5 54
1011 using rosin acid as emulsifier and coagulated with salt- acid. It is balance of mechanical strength. Is recommended for molded
very light color product stabilized with a non-staining and extruded mechanical goods, adhesives, caulks and
antioxidant. sealants.
Emulprene Emulprene 1011AH is a hot emulsion styrene-butadiene Gives excellent green tack and adhesive properties with good 23.5 55
1011AH copolymer using rosin acid as emulsifier and coagulated with balance of mechanical strength. Is recommended for molded
salt- acid. It is very light color product stabilized with a non-stain- and extruded mechanical goods, adhesives and sealants.
ing antioxidant.
25
Grade (%) 100°C
Emulprene Emulprene 1011AL is a hot emulsion styrene-butadiene Gives excellent green tack and adhesive properties with good 23.5 48
E1011AL copolymer using rosin acid as emulsifier and coagulated with balance of mechanical strength. Is recommended for molded
salt- acid. It is very light color product stabilized with a non-stain- and extruded mechanical goods, adhesives and sealants.
ing antioxidant.
Emulprene Emulprene 1011CR is a crumb of hot emulsion styrene-butadi- E1012CR is the high molecular weight version of E1006CR, it 23.5 54
1011CR ene copolymer using rosin acid as emulsifier and coagulated dissolves readily in solvents and particularly useful as binder
with salt- acid. It is very light color product stabilized with a for fibrous materials and adhesives where increased cohesive
non-staining antioxidant. This rubber is produced as free strength is desired.
flowing dusted crumb which eliminates the need for size
reduction equipment. Between 4% and 12% of Calcium
Carbonate is used as dusting agent.
Emulprene Emulprene 1012 is a high viscosity hot emulsion styrene-butadi- Particularly useful as a binder for fibrous materials and 23.5 120
1012 ene copolymer, polymerized using a fatty acid emulsifier and adhesives where increased cohesive strength is desired.
coagulated with salt-acid.It is a very light color product stabilized
with a non-staining antioxidant.
Emulprene Emulprene 1012CR is a crumb version of a high viscosity hot E1012CR is the high molecular weight version of E1006CR, it 23.5 120
1012CR emulsion styrene-butadiene copolymer, polymerized using fatty dissolves readily in solvents and particularly useful as binder
acid emulsifier and coagulated with salt-acid. It is very light color for fibrous materials and adhesives where increased cohesive
product stabilized with a non-staining antioxidant, and strength is desired.
presented as free flowing dusted crumb which eliminates the
end for size reduction equipment. Between 4% and 12% of
Calcium Carbonate is used as dusting agent.
Emulprene Emulprene 1013A is a styrene-butadiene copolymer, hot Suitable for adhesive applications it is particularly used for 43 45
1013A polymerized using a fatty acid soap. Previously to the alum-acid can-sealing compounds, tire liners, mechanical goods,
coagulation, a non-staining stabilizer is added in the manufac- including auto mounts, and household products.
turing process.
Emulprene Emulprene 1013ACR is a styrene-butadiene copolymer, hot E1013ACR is suitable for adhesive applications. It is particular- 43 45
1013ACR polymerized using a fatty acid soap. Previously to the alum-acid ly used for can-sealing compounds.
coagulation, a non-staining stabilizer is added in the manufac- Useful in blends with other elastomers to increase cohesive
turing process. This rubber is produced in free flowing crumb strength, and to provide higher green strength.
form which eliminates the need for milling, cutting, or grinding
equipment. Between 7-12% of Calcium Carbonate is used as
dusting agent.
Emulprene Emulprene 1028A is a high styrene, hot emulsion styrene-buta- This grade is exceptionally light colored. It features high green 47.5 57
1028A diene copolymer using fatty acid as emulsifier and coagulated strength, low air permeability and excellent flow properties, it
with salt-acid. It is stabilized with a non-staining antioxidant. The is recommended for use in adhesive, sealants, tire liners,
product does not contain nitrosamine promoters. mechanical goods and household products.
HSBR | INSAGUM
Grade (%) 100°C
Insagum Insagum IG1027 is a hot emulsion styrene-butadiene copolymer IG1027 is specially designed for chewing gum applications, 22 - 25 47 - 57
1027 using vegetal fatty acid as emulsifier and coagulated with giving softer chew.
salt-acid. It is stabilized with BHT antioxidant. The product
complies with U. S. FDA regulation 21 CFR §172.615 referenced
to SBR used for Chewing Gum, 21 CFR 177.2600 Indirect food
additives: Polymers. It meets the requirements in the Food
Chemical Codex for 75/25 type SBR.
Insagum Insagum IG1028 is a high styrene, hot emulsion styrene-butadi- IG1028 is specially designed for bubble gum applications, 45 - 50 52 - 64
1028 ene copolymer using vegetal fatty acid as emulsifier and giving firmer chew and larger bubbles.
coagulated with salt-acid. It is stabilized with BHT antioxidant.
The product complies with U. S. FDA regulation 21 CFR §172.615
referenced to SBR used for Chewing Gum, 21 CFR 177.2600
Indirect food additives: Polymers. It meets the requirements in
the Food Chemical Codex for 50/50 type SBR.
26
LATEX SBR | ARLATEX
Brand Description Uses Solids PH
Grade content (%)
Artalex Arlatex 1185E is an aqueous dispersion of a carboxylated Used in tire formulations and in a variety of industrial 49.0 - 51.0 7.2 - 8.0
1185E styrene-butadiene copolymer manufactured by polymerization products due to its excellent adhesion and processing
in emulsion. properties.
Artalex Arlatex 1215E is an aqueous dispersion of carboxylated styrene Used in those applications that require high rigidity and 43.0 - 45.0 8.1 - 8.9
1215E butadiene copolymer manufactured by emulsion polymeriza- tenacity, as well as reliable resistance to water. It can be
tion. blended with resins in where it provides certain flexibility
in the final finished one without affect in its resistance.
The monomer ratio in the latex produces a rigid hand.
Artalex Arlatex 1372R is an aqueous dispersion of carboxylated styrene Especially designed for the manufacturing of carpet and 52.0 - 53.0 9.0 - 9.4
1372R butadiene copolymer manufactured by emulsion polymeriza- rug backings and as binder for fibers and fabrics. It can be
tion. used in single or double pan systems, in frothed or
non-frothed process. Medium hand.
Artalex Arlatex 1490E is an aqueous dispersion of a no-carboxylated Is a product designed to be used as coating to improve 38 MIN 9.5 - 12.0
1490E styrene-butadiene copolymer manufactured by polymerization rigidity and tensile strenght in textile and cellulose
in emulsion. products.
Artalex Arlatex 1919NC is an aqueous dispersion of carboxylated Especially designed for the manufacturing of carpet and 45.0 - 49.0 8.0 - 9.0
1919NC styrene butadiene copolymer manufactured by emulsion rug backings and as binder for fibers and fabrics. It can be
polymerization. used in single or double pan systems, in frothed or
non-frothed process. Soft hand.
Artalex Arlatex 1928E is an aqueous dispersion of a cationic Especially designed for the modified asphalt solutions. 50.0 - 52.0 5.0 - 5.6
1928E styrene-butadiene copolymer manufactured by polymerization
in a hot emulsion.
CBMB | EMULBLACK
Brand Description Uses Black UMS 1+
Grade type 4100°C
Emulblack Emulblack 1606R is a black masterbatch based on cold sbr, Offers excellent physical properties and outstanding N330 65 +/- 10
1606R aromatic oil and carbon black. polymerized polymer. processing characteristics due to the complete dispertion of
SBR 100 PTS the carbon black and processing oil in the polymer. Is
HAO 10 PTS recommended for use in tires, tred rubber and molded and
Carbon Black N330 52 PTS extruded mechanical goods.
Emulblack Emulblack 1608 is a general purpose SBR oil/black masterbatch Offers excellent physical properties for high quality tire N220 70 +/- 10
1608 based on a cold polymerized polymer treads, cold retreading, conveyor belts and molded and
SBR 100 PTS extruded mechanical goods.
HAO 12.5 PTS
Carbon Black N220 52 PTS
Emulblack Emulblack 1847K is a black masterbatch based on cold SBR, Is designed especially for operations where fast, smooth N339 55+/-10
1847K aromatic oil and carbon black. extrusions are necessary, this masterbatch gives compounds
SBR 100 PTS with excellent extrusion characteristics and tread wear.
HAO 50 PTS
Emulblack Emulblack 1848 is an general purpose SBR oil/black Designed especially for tred rubber and extruded goods this N339 55+/-10
1848 masterbatch based on 1712 latex and N339 carbon black. masterbatch produces compounds with excellent extrusion
SBR 100 PTS characteristics, abrasion resistance and tread wear.
HAO 62.5 PTS
Carbon Black N339 82.5 PTS
Emulblack Emulblack 3651 is black masterbatch based on cold SBR Offers excellent physical properties high quality tire treads, N234 60+/-10
3651 and N234 carbon black. cold retreading, conveyor belts and molded and extruded
SBR 100 PTS mechanical goods.
HAO 10 PTS
27
SMB | EMULSIL
Grade (%) 100°C
Emulsil Emulsil 4773R is a silica master batch based on SBR and a 175 Offers improved wet traction while maintaining good rolling 36.5 95
4773R surface area silica fully silanized using RAE oil and a staining resistance for tire applications.
stabilizer.
SBR 100 PTS
RAE Oil 30 PTS
Silica 175 SA 70 PTS
Use 203.6 Parts for compounding calculations.
Emulsil Emulsil 4773T is a silica masterbatch based on SBR and a 175 Offers improved wet traction while maintaining good rolling 36.5 95
4773T surface area silica fully silanized using TDAE oil and a staining resistance for tire applications.
stabilizer.
SBR 100 PTS
TDAE Oil 30 PTS
Emulsil Emulsil 1671R is a silica masterbatch based on cold SBR and 175 Offers excellent physical properties for high quality tire 23.5 140
1671R surface area silica fully silanized using a staining stabilizer. treads, cold retreading, conveyor belts, molded parts and
SBR 100 PTS extruded mechanical goods.
RAE Oil 12 PTS
Emulsil Emulsil 1671N is a silica masterbatch based on cold SBR and Offers excellent physical properties and light color for high 23.5 TBD
1671N 175 surface area silica fully silanized using a non staining quality footwear, conveyor belts, molded parts and extruded
stabilizer. mechanical goods.
SBR 100 PTS
Naphthenic oil 12 PTS
Emulsil Emulsil 1671 is a silica masterbatch based on cold SBR and 175 Offers excellent physical properties for high quality tire 23.5 150
1671 surface area silica fully silanized using a staining stabilizer and treads, cold retreading, conveyor belts, molded parts and
aromatic oil. extruded mechanical goods.
SBR 100 PTS
Aromatic Oil 12 PTS
Emulsil Emulsil 4793T is a silica masterbatch based on SBR and a 230 or Offers improved wet traction and excellent abrasion 36.5 110
4793T greater surface area silica fully silanized using TDAE oil and a resistance while maintaining good rolling resistance for tire
staining stabilizer. applications.
SBR 100 PTS
TDAE Oil 35 PTS
Silica >230 SA 70 PTS
HSR | EMULPRENE
Brand Description Uses Styrene ASH
Grade (%) (%)
Emulprene Emulprene 260 is a self-reinforcing emulsion rubber due to its E260 is used as a reinforcing agent that does not alter the final 64 1.0 max
260 high styrene content. The design of the elastomer allows for products specific gravity while increasing the hardness,
excellent processability during mixing and the special rigidity, abrasive and tear resistance as well as improving the
antioxidant used in its manufacture make it non-staining. flexibility of vulcanized shoe-soles. This product can also be
used as raw material in the manufacture of tires.
Emulprene Emulprene 261 is a self-reinforcing emulsion rubber due to its E261 is used as a reinforcing agent that does not alter the final 66 1.0 max
261 high styrene content. The design of the elastomer allows for products specific gravity while increasing the hardness,
excellent processability during mixing and the special rigidity, abrasive and tear resistance as well as improving the
antioxidant used in its manufacture make it non-staining. flexibility of vulcanized shoe-soles. This product can also be
used as raw material in the manufacture of tires.
28
EMULSION NBR
EMULSION NBR
NBR 2.0 Paracril / NBR Paracril

Paracril NBR grades are produced by cold and hot polymeri- hey are produced y chemical crosslin ing or conversion
zation process. The cold process yields linear polymers with ranched. he crosslin ed grades have varying degrees of
good processing characteristics and solubility in polar reduced mill shrin to as low as 5 versus linear grades of
solvents. The hot polymerization process leads to more over 5 mill shrin . hese grades offer ene ts in thermo-
branching. Branching in the hot Paracril grades is more plastic modi cation for lower compression set and green
developed in the higher viscosity grades. The hot polymers strength improvement in thermoset recipes.
offer improved green strength. rosslin ed aracril N
grades are unique in processing and function. aracril 4 40, a plastic er extended grade, contains 50
parts of DOP in a high molecular weight NBR used in the
production of low durometer products such as roll covers.
NBR Powder Paracril NBR Spray Dried Paracril

N owder is used in friction products such as ra e pads The NBR SD acts as a secondary binder that provides a higher
and clutch discs. The NBR for these applications is typically coefficient of friction, antifading performance, and fuel oil
higher acrylonitrile content and viscosity. resistance with reduced noise.
NBR Crumb Paracril

aracril N rum is a round nitrile powder used as a
plastic modi er such as , thermoset and adhesive
applications. The NBR for these applications is typically
medium and high acrylonitrile content and viscosity.
30
NBR Paraclean NBR/PVC Paracril
aracril is a uxed lend of N and . he most
Paraclean NBR has been developed to provide a low
common ratio of N to is 70 0. higher content
residue, fast curing grade of N . araclean grades are cold
of 40 is used in applications such as sponge where very low
polymerized for best processing characteristics.
densities can e achieve through the uniform expansion of
the chemical foaming agent. aracril offers inherent
resistance to N , good colora ility, smooth surface
appearance, a rasion resistance, processing ease, and ame
resistance.
lastici er extended grades are also availa le that contain as

high as 70 parts of phthalalate for low durometer rolls.
31
EMULSION NBR
APPLICATION GUIDE
NBR PRODUCT
Type Brand Grade BAN PVC Base ML Pre-crosslinked DINP Crumb Fluex blends Fluxed blends Prefluxed blends
(%) (%) polymer extended rubber 70 NBR/30 PVC 60 NBR/40 PVC 40 NBR/60 PVC
60 DOP
NBR 2.0 Paracril 1945 19 45
NBR Paracril 1880LM 21 58

NBR Paracril X3675 38 52
NBR Paracril 33110 33 110
NBR Paracril 45110 45 110
NBR Paracril AJ 23.5 48
NBR Paracril ALT 26 73
NBR Paracril AJLT 27.5 40
NBR Paracril AJLT M50 27.5 50
NBR Paracril N41 29 77
NBR Paracril B 29.5 85
NBR Paracril BJ 29.5 50
NBR Paracril BPLT 31 38
NBR Paracril BJLT-M30 32.5 30
NBR Paracril BLT-M75 32.5 75
NBR Paracril BLT-M80 32.5 80
NBR Paracril C 35 80
NBR Paracril CLM 35 68
NBR Paracril CLT 40 65
NBR Paracril CJLT 40 50
NBR Paracril 34PE40N 34 40
NBR Paracril BJLT-HX 32 55
NBR Paracril P30.55XL 30 40
NBR Paracril P32.55XL 32.5 55
NBR Paraclean 28L35 28 35

NBR/PVC Paracril OZOM50 30 50

NBR/PVC Paracril OZO3341 30 55
NBR/PVC Paracril OZO728M60 30 60
NBR/PVC Paracril OZOP7510N 21.4 20
NBR/PVC Paracril OZO3996 40 52
NBR/PVC Paracril OZOSP80N 36.5 29
NBR/PVC Paracril OZOSP90N 23.5 21
NBR Powder Paracril FP3380XC 33 P33.80XL 80 High

NBR Powder Paracril P33110C1 33 P33.110 110
NBR Powder Paracril P3250XP 32 P32.50XL 50 Partial
NBR Powder Paracril P3350CC 33 BJLT M50 48.5
NBR Powder Paracril P3350CC2 33 P33L50 50
NBR Powder Paracril P3380CC1 32.5 BLT M80 80
NBR Powder Paracril P3380XP 33 P33.80XL 81.5 High
NBR Powder Paracril P7072P 33 P33.55XL 55 High
NBR Powder Paracril P7083P 32.5 P32.55XL 55 Partial
NBR Powder Paracril P7083XC 32 P32.60XL 55 Partial
NBR Powder Paracril P7092P 33 P33.55XL 55 High
NBR Powder Paracril P45110C1 45 P45.110 110
NBR Crumb Paracril CV 32.5 CLM 67.5

NBR Crumb Paracril CV80 32.5 C 80
NBR Crumb Paracril C3380CC 32.6 BLT - M80 80
NBR Crumb Paracril P3370CMC 33 P33.70 70
NBR Crumb Paracril P7083CR 32.5 P32.55XL 55 Partial
NBR Crumb Paracril P7087CR 32.5 BJLT - M50 50
NBR Spray Dried Paracril SD3811 38 115

NBR Spray Dried Paracril SD3811C 38 115
32
APPLICATION
Prefluxed blends Sponge Seals Hoses Footwear Rolls Wire & Custom Adhesives Friction Plastic Mechanical
60 NBR/40 PVC cable mix modification goods
70 DOP
33
NBR 2.0 | PARACRIL
Brand Description Uses BAN ML 1+4
Grade (%) 100°C
Paracril Paracril 1945 is a copolymer of butadiene and acrylonitrile, cold Offers excellent low temperature flexibility with moderate oil 19 45
1945 polymerized with a non-staining stabilizer. resistance. It is recommended to meet military specifications
and aircraft applications including O-rings, seals, gaskets,
grommets, diaphragms, and blends with other PARACRIL®
polymers to give intermediate low temperature properties.
Paracril Paracril 2840 is a copolymer of butadiene and acrylonitrile, cold Offers excellent balance of low temperature flexibility with oil 28 40
2840 polymerized with a nonstaining stabilizer. resistance, easy processing, fast curing, light color and good
performance in peroxide cure systems. It is recommended for
automotive products, seals, hoses, O-rings, packings,
footwear, rolls and thermoplastic blends.
2860 polymerized with a non-staining stabilizer. resistance, easy processing, and good performance in
peroxide cure systems, fast curing and light color. It is
recommended for automotive products, seals, hoses,
O-rings, packings, footwear, rolls and thermoplastic blends.
3335 polymerized with a nonstaining stabilizer. resistance, easy processing, fast curing, light color and a good
footwear, rolls and thermoplastic blends.
3350 polymerized with a non-staining stabilizer. resistance, easy processing, fast curing, light color and a good
adhesives, footwear, rolls and thermoplastic blends.
3380 polymerized with a non-staining stabilizer. resistance, easy processing, fast curing, light color and a good
adhesives, footwear, rolls and thermoplastic blends.
NBR | PARACRIL
Grade (%) 100°C
Paracril Paracril 1880LM is a copolymer of butadiene and acrylonitrile, Offers excellent low temperature flexibility with moderate oil 21 58
1880LM hot polymerized and non-staining stabilized. resistance. It is recommended for military specifications and
aircraft applications including O-rings, seals, gaskets,
grommets, and diaphragms, blends with other PARACRIL®
polymers can be made to give intermediate low temperature
properties.
Paracril Paracril X3675 is a copolymer of butadiene and acrylonitrile, hot Offers an excellent processability and highly cross-linked. It is 38 52
X3675 polymerized with a non-discoloring staining stabilizer. recommended for PVC modification, blends with other
Paracril polymers to improve extrusion or calendaring
performance.
Paracril Paracril 33110 is a copolymer of butadiene and acrylonitrile, Offers excellent balance of low temperature flexibility with oil 33 110
33110 cold polymerized and non-staining stabilized. resistance, high viscosity for improved green strength and
increased oil content recipes, fast curing and light color. It is
recommended for use in roll covers, automotive products,
seals, hoses, Orings and packings.
Paracril Paracril 45110 is a copolymer of butadiene and acrylonitrile, Is designed with high BAN content for best fuel and oil 45 110
45110 cold polymerized and non-staining stabilized. resistance, high viscosity for improved green strength and
increased oil content recipes, fast curing and light color. It is
recommended for use in seals, O- Rings, packing, grommets,
printing blankets and rolls.
34
Grade (%) 100°C
Paracril Paracril AJ is a copolymer of butadiene and acrylonitrile, hot Offers an excellent low temperature flexibility with moderate 23.5 48
AJ polymerized with a non-staining stabilizer. oil resistance and a good processing. It is recommended for
seals, O-Rings, and grommets, for hose and tubes requiring
low temperature flexibility and blends with other Paracril
grades.
Paracril Paracril ALT is a copolymer of butadiene and acrylonitrile, cold Offers excellent balance of low temperature flexibility with 26 73
ALT polymerized with a nonstaining stabilizer. moderate oil resistance, good extrusion characteristics, low
corrosion and low water absorption. It is recommended for
hose and tubes requiring low temperature flexibility, Orings,
seals, gaskets, grommet, diaphragms, coated fabrics and roll
covers.
Paracril Paracril AJLT is a copolymer of butadiene and acrylonitrile, cold Offers an excellent balance of low temperature flexibility with 27.5 40
AJLT polymerized with a non-staining stabilizer. moderate oil resistance, good extrusion characteristics, low
seals, O-Rings, gaskets, grommets, diaphragms, coated
fabrics and roll covers.
Paracril Paracril AJLTM50 is a copolymer of butadiene and acrylonitrile, Offers excellent balance of low temperature flexibility with 27.5 50
AJLTM50 cold polymerized with a non-staining stabilizer. moderate oil resistance, good extrusion characteristics, low
hose and tubes requiring low temperature flexibility, O-rings,
seals, gaskets, grommets, diaphragms, coated fabrics and roll
covers.
Paracril Paracril N41 is a copolymer of butadiene and acrylonitrile, cold Offers an excellent green strength, fast curing and low water 29 77
N41 polymerized with a semi staining stabilizer. Good low tempera- absorption. It is recommended for extruded products, hoses,
ture flexibility and oil resistance. O-rings, seals, gaskets, grommets, diaphragms and blends
with PVC.
Paracril Paracril B and BJ are copolymers of butadiene, hot polymerized Offers excellent balance of low temperature flexibility with oil
B and acrylonitrile with a non-staining stabilizer, good low resistance and a high green strength. It is recommended for 29.5 85
BJ temperature flexibility and oil resistance. automotive products, seals, hoses, O-rings, packing’s, 29.5 50
adhesives, sponge, coated fabrics and roll covers.
Paracril Paracril BPLT is a copolymer of butadiene and acrylonitrile, cold Offers an excellent balance of low temperature flexibility with 31 38
BPLT polymerized with a non-staining stabilizer. Fast mixing and oil resistance, fast mixing, low water absorption and low
lower heat buildup with minimun power consumption. corrosion. It is recommended for automotive products, seals,
hoses, O-rings, packings, and thermoplastic blends.
Paracril This Paracrils are copolymers of butadiene and acrylonitrile, Offers excellent balance of low temperature flexibility with oil
BLT-M30 cold polymerized with a non-staining stabilizer. Fast mixing and resistance, fast mixing, low water absorption and low 32.5 30
BLT-M40 lower heat buildup with minimun power consumption. corrosion. It is recommended for automotive products, seals, 32.5 40
BJLT-M50 hoses, O-rings and packing s, adhesives, oil field specialties, 32.5 50
BJLT-M75 wire and cable, footwear, rolls and thermoplastic blends. 32.5 75
BJLT-M80 32.5 80
Paracril Paracril C is a copolymer of butadiene and acrylonitrile, hot Offers an excellent balance of low temperature flexibility with 35 80
C polymerized with a non-staining stabilizer. Good resistance to oil resistance, fast mixing, low water absorption and low
fuels and mineral oils. Very good abrasion resistance. corrosion. It is recommended for automotive products, seals,
hoses, O-rings, packings, and thermoplastic blends.
Paracril Paracril CLM is a copolymer of butadiene and acrylonitrile, hot Offers an excellent oil resistance with moderate low tempera- 35 68
CLM polymerized with a non-staining stabilizer. Similar to Paracril C ture flexibility, good green strength, and low gel content. It is
but has lower viscosity. recommended for seals, hoses, O-rings, packings, adhesives,
and printing blankets.
Paracril Paracril CLT is a copolymer of butadiene and acrylonitrile, cold Offers superior oil resistance, good processing properties and 40 65
CLT polymerized with a non-staining stabilizer. Superior oil low water absorption. It is recommended for seals, O-rings,
resistance. Low corrosion and mold fouling. packings and grommets, printing blankets, rolls, oil field
specialties, fuel hoses and mechanical goods.
35
Grade (%) 100°C
Paracril Paracril CJLT is a copolymer of butadiene and acrylonitrile, cold Offers a superior oil resistance, good processing properties 40 50
CJLT polymerized with a non-staining stabilizer. Superior oil and low water absorption. It is recommended for seals,
resistance. Low corrosion and mold fouling. O-rings, packings and grommets, printing blankets, rolls, oil
field specialties, fuel hoses and mechanical goods.
Paracril Paracril 34PE40 is a copolymer of butadiene and acrylonitrile, Is recommended for use in low durometer roll covers, 34 40
34PE40N Plasticized with 50 parts of DINP, cold polymerized with footwear, in highly plasticized recipes and blends to improve
non-staining stabilizer. abrasion resistance in NBR recipes.
Paracril Paracril BJLTHX is a copolymer of butadiene and acrylonitrile, Offers good heat resistance after oil aging, partially 32 55
BJLTHX cold polymerized with staining and discoloring stabilizer. cross-linked, excellent green strength, smooth extrusion and
low die swell. It is recommended for hose, seals, and O-rings,
lathe cut gaskets, belting, calendared products and pan seals.
Paracril Paracril 30.55XL is a copolymer of butadiene and acrylonitrile, Offers excellent green strength, smooth extrusion, low die 30 40
P30.55XL highly cross linked. It is stabilized with a non-staining and swell, low fogging and an excellent thermal stability, It is
non-discoloring stabilizer. recommended for use in extrusions, calendared goods and
PVC modifications.
Paracril Paracril 32.50XL is a copolymer of butadiene and acrylonitrile, Offers excellent green strength, smooth extrusion, low die 33 50
P32.50XL with medium-high crosslinking level. It is stabilized with a swell and a good stability. It is recommended for use in PVC
non-staining and non-discoloring stabilizer. modification, in thermoset rubber compounds, extrusions,
lathe-cut gaskets and for calendared products.
Paracril Paracril 32.55XL is a copolymer of butadiene and acrylonitrile, Offers excellent green strength, smooth extrusion, and low 32.5 55
P32.55XL partially cross linked. It is stabilized with a non-staining and die swell. It is recommended for use in extrusions,
non-discoloring stabilizer. calendared products and PVC modifications.
Paracril Paracril 32.60XL is a copolymer of butadiene and acrylonitrile, Offers excellent green strength, smooth extrusion and low die 32 50
P32.60XL with medium-high crosslinking level. It is stabilized with a swell. It is recommended for use in extrusions and lathe-cut
no-staining and non-discoloring stabilizer. gaskets, calendared products and PVC modifications.
P33.55XL highly cross linked. It is stabilized with a non-staining and swell. It is recommended for use in PVC modification, blends
non-discoloring stabilizer. with clear NBR to improve green strength, extruded and
calendared products.
P33.80XL highly cross linked. It is stabilized with a non-staining and swell. It is recommended for use in PVC modification, blends
non-discoloring stabilizer. with clear NBR to improve green strength, extruded and
calendared products.
36
NBR | PARACLEAN
Grade (%) 100°C
Paraclean Paraclean 28L35 is a state-of-the-art copolymer of butadiene Offers “clean” low-volatility NBR fast curing, excellent low 28 35
28L35 and acrylonitrile, cold polymerized with a non-staining stabilizer. temperature flexibility with moderate oil resistance, low
Unique features include "clean" low-fouling performance, low water absorption and resistant to corrosion. It is recommend-
volatily at elevated temperatures, and fast cure rates. ed for injection molded products, O-rings, seals, gaskets,
grommets, diaphragms, hoses and tubes requiring low
temperature flexibility.
Paraclean Paraclean 28L45 is a state-of-the-art copolymer of butadiene Offers “clean” low-volatility NBR, fast curing, excellent low 28 45
volatily at elevated temperatures, and fast cure rates. ed for injection molded products, O-rings, seals, gaskets,
grommets, diaphragms, hoses and tubes requiring low
temperature flexibility.
Paraclean Paraclean 28L80 is a state-of-the-art copolymer of butadiene Offers “clean” low-volatility NBR, fast curing, excellent low 28 80
volatily at elevated temperatures, and fast cure rates. ed for sponge, extrusions, O-rings, seals, gaskets, grommets,
diaphragms, hose and tubes requiring low temperature
flexibility.
Paraclean Paraclean 31L35 is a state-of-the-art copolymer of butadiene Offers “clean” low-volatility NBR for injection molding, fast 31 35
31L35 and acrylonitrile, cold polymerized with a non-staining stabilizer. curing, excellent low temperature flexibility with moderate oil
Unique features include "clean" low-fouling performance, low resistance, low water absorption and resistant to corrosion. It
volatily at elevated temperatures, and fast cure rates. is recommended for injection molded products, O-rings,
seals, gaskets, grommets, diaphragms, and blends with PVC.
33L35 and acrylonitrile, cold polymerized with a non-staining stabilizer. curing, low water absorption and low corrosion. It is
Unique features include "clean" low-fouling performance, low recommended for injection molded products, O-rings, seals,
volatily at elevated temperatures, and fast cure rates. gaskets, grommets, diaphragms, sponge and for blends with
PVC.
33L50 and acrylonitrile, cold polymerized with a non-staining stabilizer. curing, low water absorption and low corrosion. It is
volatily at elevated temperatures, and fast cure rates. gaskets, grommets, diaphragms, footwear, sponge and for
blends with PVC.
Paraclean Paraclean 36L45 is a state-of-the-art copolymer of butadiene Offers “clean” low-volatility NBR injection molding, fast 36 45
36L45 and acrylonitrile, cold polymerized with a non-staining stabilizer. curing, low water absorption and a low corrosion. It is
volatily at elevated temperatures, and fast cure rates. gaskets, grommets, diaphragms, hoses and footwear.
37
NBR/PVC | PARACRIL OZO
Brand Description Uses PVC ML 1+4
Grade (%) 100°C
Paracril Paracril O OM50 is a pre-fluxed blend of NBR/PVC containing Offers easy processing, excellent abrasion resistance, good 30 50
OZOM50 30% PVC. flame resistance and an excellent ozone resistance. It is
recommended for shoes soles, wire, cable, hoses, tubing,
coated fabrics, belting, closed cell sponge and molded
mechanical goods.
Paracril Paracril O OM58 is a pre-fluxed blend of NBR/PVC containing Offers easy processing, good abrasion resistance, good flame 30 58
OZOM58 30% PVC. resistance and an excellent ozone resistance. It is
recommended for wire, cable, shoe soles, hoses, tubing,
coated fabrics, belting, and closed cell sponge and for
molded mechanical goods.
Paracril Paracril O OM65 is a pre-fluxed blend of NBR/PVC containing Offers higher tensile properties, improved green strength, 30 65
OZOM65 30% PVC. improved abrasion resistance, good flame resistance and an
excellent ozone resistance. It is recommended for wire, cable,
footwear, coated fabrics and belting.
Paracril Paracril O O3341 is a pre-fluxed blend of NBR/PVC containing Offers good tensile properties, good green strength, good 30 55
OZO3341 30% PVC and 28% BAN NBR base polymer. abrasion resistance, good flame resistance and an excellent
ozone resistance. It is recommended for hoses, tubing, wire,
cable, footwear, coated fabrics, belting and molded mechani-
cal goods.
Paracril Paracril O OM60 is a pre-fluxed blend of NBR/PVC containing Offers good tensile properties, good green strength, good 30 60
OZO728M60 30% PVC and 28% BAN NBR base polymer. abrasion resistance, good flame resistance and an excellent
ozone resistance. It is recommended for wire, cable,
footwear, extrusions, coated fabrics and belting.
Paracril Paracril O OP7510N is a pre-fluxed blend of 100 NBR / 60 PVC / Offers easy processing, excellent abrasion resistant, good 21.4 20
OZOP7510N 120 DINP. flame and ozone resistance. It is recommended for low
durometer roll covers.
Paracril Paracril O O3996 is a pre-fluxed blend of NBR/PVC containing Offers easy processing, excellent abrasion resistance, good 40 52
OZO3996 40% PVC. flame resistance and an excellent ozone resistance. It is
recommended for closed cell sponge, hoses, tubing, coated
fabrics, belting and blends with SBR.
Paracril Paracril O OSP80N is a pre-fluxed blend of 100 NBR/ 150 PVC / Offers easy processing, excellent abrasion resistant, good 36.5 29
OZOSP80N 150 DINP. flame and ozone resistance. It is recommended for low
durometer roll covers.
Paracril Paracril O OSP90N is a pre-fluxed blend of 60 NBR / 40 PVC / 70 Offers easy processing, excellent abrasion resistant and a 23.5 21
OZOSP90N DINP. good ozone resistance. It is recommended for low durometer
roll covers.
38
NBR POWDER | PARACRIL
Grade (%) 100°C
Paracril Paracril FP3380XC is a copolymer of butadiene and acrylonitrile Offers medium mooney viscosity and a highly cross-linked. It 33 80
FP3380XC (Particulated Paracril 33.80XL) in powder form using Calcium is recommended for PVC, ABS, SAN modification and friction
carbonate as a partitioning agent. Hot polymerized with products.
non-staining stabilizer.
Paracril Paracril 33110C1 is a copolymer of butadiene and acrylonitrile in Offers excellent balance of low temperature flexibility with oil 33 110
P33110C1 powder form using calcium carbonate with 1% calcium stearate resistance, high viscosity for improved green strength and
as partitioning agent. increased oil content recipes, fast curing and light color. It is
recommended for use in roll covers, automotive products and
mechanical goods.
Paracril Paracril 3250XP is the powder version of the Paracril 32.50XL Offers improved UV stability. It is recommended for use in 32 50
P3250XP using PVC with 1% of calcium stearate as a partitioning agent. PVC modification.
Paracril Paracril 3350CC is a particulate version of Paracril BJLTM50 using Is recommended for adhesives and PVC modification. 33 48.5
P3350CC calcium carbonate with 1% of calcium stearate as a partitioning
agent.
Paracril Paracril 3350CC2 is a particulate version of Paraclean 33L50 Is recommended for adhesives and PVC modification. 33 50
P3350CC2 using calcium carbonate with 2% of calcium stearate as a
partitioning agent.
Paracril Paracril 3380CC1 is a particulate version of Paracril BLTM80 Is recommended for use in PVC modification and adhesives. 32.5 80
P3380CC1 using calcium carbonate with 1% of calcium stearate as a
partitioning agent.
Paracril Paracril 3380XP is the powder version of the Paracril 33.80XL Is recommended for use in PVC modification. 33 81.5
P3380XP using PVC as a partitioning agent.
Paracril Paracril 7072P is a particulate version of Paracril 33.55XL using Offers medium mooney viscosity and highly cross-linked. It is 33 55
P7072P PVC as a partitioning agent. recommended for PVC modification.
Paracril Paracril P7083P is the particulate version of the Paracril 32.55XL offers partial cross-linking and it is recommended for use in 32.5 55
P7083P using PVC and 1% calcium stearate as a partitioning agent. PVC modification.
Paracril Paracril 7083XC is the particulate version of the Paracril 32.60XL Offers improved UV stability. It is recommended for use in 32 55
P7083XC using calcium carbonate and 2% calcium stearate as a partition- PVC modification.
ing agent.
Paracril Paracril 7092P is the particulate version of the Paracril 33.55XL Offers high cross-linking and it is recommended for use in 33 55
P7092P with PVC as a partitioning agent with 2% calcium stearate. PVC modification.
Paracril Paracril P45110C1 is a copolymer of butadiene and acrylonitrile Offers high acrylonitrile level with high viscosity. It is 45 110
P45110C1 in powder form using calcium carbonate with 1% calcium recommended for use in roll covers and industrial mechani-
stearate as a partitioning agent. cal goods.
39
NBR CRUMB | PARACRIL
Grade (%) 100°C
Paracril Paracril CV is a particulate version of Paracril CLM using soluble Offers good green strength and readily solvates in MEK. It is 35.2 67.5
CV PVC resin as a partitioning agent. recommended for use adhesives, solvent cast seals and
grommets.
Paracril Paracril CV80 is a particulate version of Paracril C using soluble Offers good green strength and readily solvates in MEK. It has 35.2 80
CV80 PVC resin as a partitioning agent. higher viscosity than Paracril CV. It is recommended for use
adhesives, solvent cast seals and grommets.
Paracril Paracril C3380CC is a particulate version of Paracril BLTM 80 Is recommended for use in PVC modification and adhesives. 32.6 80
C3380CC using calcium carbonate as a partitioning agent.
Paracril Paracril 3370CMC is a particulate version of Paracril 33.70 using Offers excellent balance of low temperature flexibility with oil 33 70
P3370CMC calcium carbonate as a partitioning agent. resistance, easy processing, fast curing and light color. It is
recommended for use in adhesives and PVC Modification.
Paracril Paracril 7083CR is a particulate version of Paracril 32.55XL with Offers partially cross-linked. It is recommended for use in PVC 32.5 55
P7083CR PVC as a partitioning agent with 1% calcium stearate. modification.
Paracril Paracril 7087CR is the particulate version of Paracril BJLTM50 Offers partially cross-linked. It is recommended for use in PVC 32.5 50
P7087CR with PVC as a partitioning agent with 1% calcium stearate. modification.
NBR SPRAY DRIED | PARACRIL

Grade (%) 100°C
Paracril Paracril SD3811 is a copolymer of butadiene and acrylonitrile in It is recommended for use in friction products. 38 115
SD3811 powder form using talc as the partitioning agent.
Paracril Paracril SD3811C is a copolymer of butadiene and acrylonitrile It is recommended for use in friction products. 38 115
SD3811C in powder form using calcium carbonate as the partitioning
agent.
40
41
dynasolgroup.com
Dynasol Group. Madrid Dynasol Group. Houston [email protected]

Titán 15, 9th Floor 14340 Torrey Chase Boulevard Suite
28046 Madrid, Spain #365
Phone: (34) 900 103 239 Houston, TX 77014
Fax: (34) 913 238 352 Phone: (281) 874 08 88
Toll Free: 1 877 559 75 68
Fax: (281) 885 17 42

Dynasol - Emulsion Brochure

Uploaded by

Copyright:

Available Formats

Dynasol - Emulsion Brochure

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dynasol - Emulsion Brochure

Uploaded by

Copyright:

Available Formats

Resilience

The art of adapting

Dynasol Group has a JV in China located in Nanjing Jiangsu

The main markets we serve are tire, tire retread, automotive,

Cold SBR Emulprene Oil Extended SBR Emulprene

HSR Emulprene CBMB Emulblack

Latex SBR Arlatex SMB Emulsil

Cold SBR Emulprene 1500 23.5 52

Oil Extended SBR Emulprene 1712 23.5 HAO 46

HSBR Emulprene 1006 23.5 50

HSBR Insagum 1027 22 - 26 47 - 57

HSR Emulprene 260 64 1.0 MAX

Latex SBR Arlatex 1185E 7.2 - 8.0 300 max 49 - 51

CBMB Emulblack 1606R 23.5 N330 65+/-10 52

SMB Emulsil 4773R 36.5 RAE 95 70

OIL EXTENDED SBR | EMULPRENE

NBR 2.0 Paracril / NBR Paracril

NBR Powder Paracril NBR Spray Dried Paracril

NBR Crumb Paracril

lastici er extended grades are also availa le that contain as

NBR Paracril 1880LM 21 58

NBR Paraclean 28L35 28 35

NBR/PVC Paracril OZOM50 30 50

NBR Powder Paracril FP3380XC 33 P33.80XL 80 High

NBR Crumb Paracril CV 32.5 CLM 67.5

NBR Spray Dried Paracril SD3811 38 115

NBR SPRAY DRIED | PARACRIL

Dynasol Group. Madrid Dynasol Group. Houston [email protected]

You might also like