Map Color and Other

Channels
Ranking of perceptual tasks
Introduction - Color
• The color is best understood in terms of three separate channels:
luminance, hue, and saturation.
• The major design choice for colormap construction is whether
the intent is to distinguish between categorical attributes or to
encode ordered attributes.
• Sequential ordered colormaps show a progression of an attribute
from a minimum to a maximum value
• diverging ordered colormaps have a visual indication of a zero
point in the center where the attribute values diverge to
negative on one side and positive on the other.
Introduction - Color

Bivariate colormaps are designed to show two attributes

simultaneously using carefully designed combinations of
luminance, hue, and saturation.

The characteristics of several more channels are also

covered: the magnitude channels of size, angle, and
curvature and the identity channels of shape and
motion.
 Color Vision
The retina of the eye has 2 different kinds of receptors.
• The rods actively contribute to vision only in low-light.

• The main sensors in normal lighting conditions are the

cones.

• There are 3 types of cones, each with peak sensitivities at a different

wavelength within the spectrum of visible light.
• The visual system immediately processes these signals into three opponent
color channels:
• one from red to green
• one from blue to yellow
• one from black and white encoding luminance information.
Color Spaces
 The color space of what colors the human visual system can
detect is three dimensional; that is, it can be adequately described
using three separate axes.
 There are many ways to mathematically describe color as a space
and to transform colors from one such space into another.
 Some of these are extremely convenient for computer
manipulation, while others are a better match with the
characteristics of human vision.
RGB System
• The most common color space in computer graphics is
the system where colors are specified as triples of red,
green, and blue values.
• Although this system is computationally convenient, it is
a very poor match for the mechanics of how we see.
• The red, green, and blue axes of the RGB color space
are not useful as separable channels; they give rise to
the integral perception of a color.
 HSL System
• The hue–saturation–lightness or HSL system is more intuitive and
is heavily used by artists and designers.
• The hue axis captures what we normally think of as pure colors
that are not mixed with white or black: red, blue, green, yellow,
purple, and so on.
• The saturation axis is the amount of white mixed with that pure
color. For instance, pink is a partially desaturated red.
• The lightness axis is the amount of black mixed with a color.
Luminance, Saturation and Hue
• Color can be confusing in visual analysis because it is sometimes used as
a magnitude channel and sometimes as an identity channel.

• Luminance and saturation are magnitude channels, while hue is a identity

channel.
Transparency
• A fourth channel strongly related to the other three color
channels is transparency: information can be encoded by
decreasing the opacity of a mark from fully opaque to completely
see-through.
• Transparency cannot be used independently of the other color
channels because of its strong interaction effects with them.
• Transparency is used most often with superimposed layers, to
create a foreground layer that is distinguishable from the
background layer.

• It is frequently used redundantly, where the same information

is encoded with another channel as well.
Colormaps
• A colormap specifies a mapping between colors and data values;
that is, a visual encoding with color. Using color to encode data is
a powerful and flexible design choice, but colormap design has
many pitfalls for the unwary.

• Colormaps can be categorical or ordered, and ordered colormaps

can be either sequential or diverging.
 Categorical colormap
• A categorical colormap uses color to encode categories
and groupings.

• Categorical colormaps are normally segmented. They

are are also known as qualitative colormaps.
• Very effective when used appropriately; for categorical data, they
are the next best channel after spatial position.
• Categorical colormaps are typically designed by using color as an
integral identity channel to encode a single attribute, rather than
to encode three completely separate attributes with the three
channels of hue, saturation, and luminance.
Categorical colormap
• The number of discriminable colors for coding small separated
regions is limited to between six and twelve bins.
• You should remember to include background color and any default
object colors in your total count: some or all of the most basic
choices of black, white, and gray are often devoted to those uses.

• Easily nameable colors are desirable, both for memorability

and ability to discuss them using words.

• A good resource for creating colormaps is ColorBrewer

at http://www.colorbrewer2.org
Ordered Colormaps

• An ordered colormap is appropriate for encoding

ordinal or quantitative attributes.
• A sequential colormap ranges from a minimum value
to a maximum value.
• A diverging colormap has two hues at the endpoints
and a neutral color as a midpoint, such as white, gray,
or black, or a high-luminance color such as yellow.
Other Channels
Size Channels
• Size is a magnitude channel suitable for ordered data.
• Length is one-dimensional (1D) size; more specifically, height is
vertical size and width is horizontal size. Area is two-dimensional
(2D) size, and volume is three- dimensional (3D) size.
• Our judgements of length are extremely accurate.
• Our judgement of area is significantly less accurate.
• The volume channel is quite inaccurate.
Other Channels: Angle Channels
The angle channel encodes magnitude information based on the
orientation of a mark: the direction that it points.
• There are two slightly different ways to consider orientation
that are essentially the same channel. With angle, the orientation of
one line is judged with respect to another line. With tilt, an
orientation is judged against the global frame of the display.
• This channel is somewhat less accurate than length and position, it is
more accurate than area.
 Other Channels
Curvature Channel
• The curvature channel is not very accurate, and it can
only be used with line marks.

• It cannot be used with point marks that have no length, or area

marks because their shape is fully constrained.
• The number of distinguishable bins for this channel is low,
probably around two or three; it is in an equivalence class
with volume (3D size) at the bottom of the magnitude channel
ranking.
 Other Channels
Shape Channels
• Shape as a identity channel that can be used with point
and line marks.

• Applying the shape channel to line marks results in

stipple patterns such as dotted and dashed lines.
Motion Channels
• Several kinds of motion are also visual channels, including
direction of motion, velocity of motion, and flicker frequency.
• Motion is less studied than other channels.
Thank You