Point Cloud Processing Software: Geotechnical Analysis Using Modern 3D Imaging Technologies

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Digital Image Analysis Systems • Software • Service

Point Cloud
Processing
Software
Geotechnical Analysis
Using Modern 3D Imaging
Technologies

Point Cloud Automated Fracture Delineation Stereonet


What is Split-FX®?
Split-FX is a software package to pro-
cess point clouds from LIDAR scans
and photogrammetry. The software
can view and edit point clouds, view
digital images, create triangulated
meshes, register point clouds, create
3D photodraped images and perform What is a point cloud?
general point cloud measurements of The output from a LIDAR scanner is a
distance, area and volume.
Benefits point cloud. It is a dense array of
points representing the three dimen-
Rapid, safe, unbiased analysis.
sional geometry of scanned objects
Why use Split-FX®? ➤ Geotechnical surveys using tradi- such as highway and mine slopes,
tional manual methods have many underground tunnels and rock and
Split-FX is the only point cloud process- problems, including safety, limited soil foundations. Airborne LIDAR also
ing software designed specifically for access, human bias, and the speed produces a point cloud that can be
geotechnical applications. It has many of manual data acquisition. LIDAR analyzed with Split-FX. High-
features specifically for the geotechnical scanning and digital photogram- resolution digital images taken along-
analysis of rock and soil exposures, metry can be conducted at a safe side LIDAR scans can be used to col-
including: distance from the slope, as high orize the point clouds and to produce
➤ Automatically delineate rock fracture resolution scanners currently have a three dimensional photodraped
surfaces and determine their orienta- a range up to 1 km. Data from the image. Point clouds can also be pro-
tion and other fracture attributes. entire slope can now be measured duced from photogrammetry surveys.
Fractures can also be edited, deleted, and quantified at a high sampling
added manually and visualized in a density, as compared to the tradi-
variety of ways. tional manual methods of taking Change Detection
➤ Determine fracture orientation from measurements only where you can Split-FX has features specifically for
traces on the point cloud or a draped safely access. change detection. Change detection
photo. This is particularly helpful for ➤ Automating the analysis of the involves subtracting two point clouds
analyzing rock faces with little relief or data reduces human bias, and both taken of the same scene at different
when fracture surfaces are obscured in the field scanning and the point times. The resulting difference point
the direction of scanning. cloud processing can be conducted cloud can be used to monitor slope
rapidly. movement, rockfall occurrence along a
➤ Plot stereonet of fracture poles with slope, ground subsidence due to geo-
contour plotting, inserting joint sets ➤ LIDAR scanners are expensive, but technical problems, underground dis-
and calculating joint set statistics. normally the cost of a geotechnical placement, etc. It can also be used to
➤ Create cross sections, which can be analysis utilizing LIDAR scanning calculate before and after volumes for
used for a variety of geotechnical and point cloud processing soft- excavations and stockpiles.
applications, including rockfall tra- ware will be less expensive than the
jectories down a slope, blasting bur- equivalent analysis using tradition-
al methods. The latest LIDAR scan-
den calculations, and fracture sur-
face roughness JRC determination. ners are faster, more accurate and Mission Statement
less expensive than their older Split Engineering creates customer
➤ Tools for measuring fracture length, counterparts. Photogrammetry can value through facilitating optimal and
spacing and block size. efficient mine operations by custom
also be used to produce point
developing and implementing the most
➤ Export point cloud, mesh, fracture, clouds, and some photogrammetry technologically advanced techniques
trace and cross section information software is available at a reason- of image analysis. Split Engineering
to CAD, slope stability, and other able cost. will maintain its reputation in the min-
types of programs. ing industry for exceeding customer
expectations through exemplary cus-
tomer service.

Digital Image Analysis Systems • Software • Service


www.spliteng.com
©2010 Split Engineering LLC. Split-FX is the registered trademark of Split Engineering.

You might also like