Scribd
Upload
2K views2 pages

Process Design Basis

The document outlines the process for developing a Process Design Basis (PDB) document. It describes generating a draft PDB using a standard format and headings. It then describes an internal review and revision process involving comments from various disciplines. Once comments are addressed, the PDB is issued to the client as approved for design.

Uploaded by

TshepanGXI
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views2 pages

Process Design Basis

The document outlines the process for developing a Process Design Basis (PDB) document. It describes generating a draft PDB using a standard format and headings. It then describes an internal review and revision process involving comments from various disciplines. Once comments are addressed, the PDB is issued to the client as approved for design.

Uploaded by

TshepanGXI
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

PROCESS DESIGN BASIS

ISSUED FOR COMMENTS (IFC)

ANY ONE OR MORE OF THE FOLLOWING

TENDER DOCUMENT INCLUDING PROCESS DETAILS


OVERALL PROCESS DESCRIPTION / DIAGRAM INCLUDING PLANT / UNIT CAPACITY
LICENSOR PROCESS DETAILS 4. CONCEPT OR PRE-FEED REPORT

AVAILABLE - START

NO IS STANDARD YES
FORMAT
AVAILABLE

ADOPT STANDARD FORMAT WITH GENERATE WORD DOCUMENT. PROCESS DESIGN BASIS MAY
FOLLOWING HEADINGS INCLUDE BASIS FOR BUT NOT BE LIMITED TO:
ABBREVIATIONS & DEFINITIONS DESIGN PRESSURE
INTRODUCTION DESIGN TEMPERATURE
PROCESS DESCRIPTION DESIGN OR MAXIMUM VELOCITIES FOR PIPING / PIPELINES
PROJECT SCOPE NPSHA (PUMP HYDRAULICS)
DESIGN FOULING FACTORS (HEAT EXCHANGERS)
DESIGN PHILOSOPHY NOZZLE MOMENTUM VALUES (VESSELS / SEPARATORS)
DESIGN CRITERIA PIPING ROUGHNESS VALUES
CODES & STANDARDS OPERATION, CONTROL & SAFEGUARDING PHILOSOPHY
REFERENCES ISOLATION PHILOSOPHY
LIST OF HOLDS DRAIN PHILOSOPHY
APPENDICES MATERIAL & CORROSION PHILOSOPHY
UTILITY REQUIREMENT & BATTERY LIMIT CONDITIONS FOR ISBL
CHEMICAL DOSING REQUIREMENT
FIRE, SMOKE & GAS DETECTION PHILOSOPHY
INSULATION REQUIREMENT

COMMENTS
BACK CHECK
SDC

REVISE TO NO COMMENTS
INCORPORATE
ISSUED FOR “IDC” IN FOLLOWING SEQUENCE
PIPING
C&A
MECHANICAL
ELECTRICAL
CIVIL
PIPELINE (IF APPLICABLE)
PROJECTS

YES
COMMENTS

REVISE TO INCORPORATE IF IN
AGREEMENT NO
DISCUSS TO REMOVE IF NOT IN
AGREEMENT

CHECK AGAINST DISICIPLINE CHECK LIST &


CORRECT IF NECESSARY

ISSUE TO CLIENT AS
“ISSUED FOR COMMENTS” (IFC)
PROCESS DESIGN BASIS

APPROVED FOR DESIGN (AFD)

“IFC” – MASTER COPY - AVAILABLE

START

COMMENTS
CLIENT
e.g. UTILITY MECHANICA
L
REQUIREMENT
PIPING / e.g. MOC, INSULATION,
PIPELINE ISOLATION, DRAIN
PHILOSOPHY
e.g. CHANGED SOW,
REVISE TO PROJECTS
e.g. CONTROL & INCORPORATE
SAFEGUARGING CODES & STANDARDS
C&A
FIRE, SMOKE & GAS
DETECTION

BACK CHECK
“SDC”

YES
COMMENTS

NO

REVISE TO ISSUED FOR “IDC” IN FOLLOWING


INCORPORATE SEQUENCE

PIPING
C&A
MECHANICAL
ELECTRICAL
CIVIL
PIPELINE (IF APPLICABLE)
PROJECTS

YES COMMENTS

INCORPORATED & REVISE IF IN


AGREEMENT
DISCUSS TO REMOVE IF NOT IN
AGREEMENT NO

PREPARE DISCIPLINE CHECKLIST


WITH “AFD” REVISION

ISSUE TO CLIENT AS “APPROVED


FOR DESIGN” (AFD)

You might also like