Sour Water Stripper: Our Experience

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

ETA PROCESS PLANT

Sour Water Stripper


Our Experience
Eta offers customised Sour Water Stripping packages for onshore and offshore applications. Eta maintains project
management and quality assurance standards that are in compliance with the requirements of the leading oil and
petrochemical companies across the globe.

Eta’s optimised process design and comprehensive project management can produce a cost effective turnkey or fully
skid-mounted package plant.

Eta’s process expertise is backed by the full range of high efficiency KOCH-GLITSCH® tower internals and media.

Our Technologies
Sour water containing hydrogen sulphide and carbon dioxide is treated in a
stripping column by contacting the liquid stream with a sweet gas such as
fuel gas.

Through the use of in-house design programs developed over several years,
Eta is able to provide stripping units to achieve very low H2S and CO2 levels,
even in oily waters (up to 1000 ppm wt oil).

The proportion of H2S that is available in its free form is principally


dependent on the liquid pH and temperature. As H2S and CO2 are stripped
from the water, the pH will rise, reducing the proportion of free H2S in the
liquid.

Eta offers complete design and installation of turnkey sour water stripping
systems.

I ISTRIPPING COLUMN
Packed or trayed columns are supplied to suit the required specifications
and operating conditions.

I IACID DOSING SYSTEM


To achieve the required feed water pH, Eta can provide skid-mounted acid
dosing systems complete with storage vessels, dosing pumps, valves,
instrumentation, and control panel.

Full skid-mounted packages can be supplied incorporating all major


equipment items as well as interconnecting pipework, valves, and
TYPICAL
instrumentation. PLC-based control systems can be mounted directly in SOUR WATER
the hazardous area or remotely in a safe area. Motor control systems can STRIPPER
also be provided for a complete turnkey system.
ETA PROCESS PLANT | SOUR WATER STRIPPER

Benefits Continuous
• Customised design Support & Service
• Design & supply of full PLC control systems and motor
Eta’s engineers are closely involved in all aspects of your
controls with user interface via HMI
project starting with process evaluation, integration
• Reduced on-site time
and optimisation, followed by detailed process and
• Compact turnkey systems for Platform, FPSO, and
onshore installation mechanical engineering, E&I and design through
• Easy operation and low maintenance complete fabrication, assembly, inspection, testing, and
• High efficiency removal commissioning as well as post-commissioning operations
• Ongoing support throughout the life of the equipment service.

References
Eta has extensive reference lists available upon request.

TYPICAL SOUR WATER STRIPPER FLOW SHEET

VENT

STRIPPING FUEL
GAS
OVERFLOW
PULSATION
DAMPENER

ACID STORAGE
TANK

SEAL POT PULSATION


DAMPENER M

HYDROCHLORIC
ACID DOSING
HYDROCHLORIC PUMPS
ACID FEED
PUMP
PRODUCED M
WATER

STRIPPER

FUEL GAS
TREATED WATER
OUTLET

Please contact us for further information.


Eta Process Plant
A Division of Koch Chemical Technology Group Ltd.
First Floor, Three Counties House
Festival Way
Stoke-on-Trent
ST1 5PX
United Kingdom
Tel : +44 (0) 1782-744-561 | E-mail : [email protected]
Website : www.etapp.com
For related trademark information, visit www.koch-glitsch.com/trademarks.
© 2012-2019 Koch-Glitsch, LP. All rights reserved. 105-Rev-1 01.2019
YOU CAN RELY ON US.

You might also like