Scribd
Upload
194 views4 pages

Cross Bar Feeder

feed

Uploaded by

Priyaprasad Panda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
194 views4 pages

Cross Bar Feeder

feed

Uploaded by

Priyaprasad Panda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Crossbar Feeder

Highspeed for press lines

Perfomance along the line. Automation from Schuler.

Forming the Future


Perfomance along the line. Automation from Schuler.

Highspeed for press lines

High output and maximum Highspeed press lines Retrofit for higher efficiency
flexibility
The parts are transported from die to die The Crossbar Feeder can be retrofitted
Schuler’s Crossbar Feeder increases without intermediate stations and can into an existing press line without modifi-
press shop productivity. This advanced be repositioned by the Crossbar Feeder. cations to the press, the moving bolsters,
automation technology will significantly Therefore, only one tooling element is or the dies. You can easily modernize
improve efficiency of mechanical high- needed per press opening. your press line to achieve higher pro-
speed and servo press lines. duction rates with this automation.

Loading press 1 with Crossbar Feeder No intermediate station required

Press line with ServoDirect Technology and Crossbar Feeder automation


Flexibility with seven axes of mo-
3
tion for part positioning

The Crossbar Feeder moves on a vertical


axis that is mounted onto the uprights.
Thanks to its compact design the Cross-
4
bar Feeder is extremely rigid. The tooling
system has been adapted from the suc-
cessful Schuler Crossbar Presses. Dou-
ble or quadruple toolings are optional.

• Vertical axis by rack-and-pinion drive


for long service
• Driven by high-performance torque
motors
1 • Separating axis for orienting double or
5
positioning single parts
• Servo drives using standard drives,
permanently lubricated
2
• Standardized control software
• Control system with integrated shock
absorption system

1 Crossbar 2 Tooling 3 Servo drive


4 Vertical axis 5 Separating axis

advantages Crossbar Feeder

• Production rates in continuous run and single stroke mode • Flexible press distances
– 15 strokes per minute on mechanical press lines • Horizontal axis optional for large distances between presses
– 17 strokes per minute on servo press lines • For the manufacture of steel and aluminium parts
• Seven axes of motion for part positioning, part orientation • Open access to die space and to Crossbar Feeder
in the feeder • Dies can overhang beyond the moving bolster
• No intermediate stations required, part transport from die • For blank loaders and end-of-line systems
to die • Quick change of entire units
• Quick tooling and die change • For new press lines and retrofits
• Only one set of tooling per press opening • Simple and fast integration into press lines
More. Service from Schuler.

Technical service Performance enhancement


• Maintenance and servicing • Optimization
• Machine inspection • Modernization
• Safety inspection • Die and process technology
• Preventive maintenance
• Energy checks Training
• Teleservice • Schuler Academy
• Overhaul • Production start-up support
• Machine relocation
• Machine installations Used equipment

Service worldwide:
Germany • France • Great Britain • Italy •
Switzerland • Slovakia • Spain • Czech Republic •
Russia • USA • Mexico • Brazil • China • India

Peltzer & Ehlers


218E-1012011-WSP Copyright by Schuler

SCHULER Pressen GmbH & Co. KG


Bahnhofstr. 41  73033 Göppingen  Germany
Phone + 49 7161 66-0  Fax + 49 7161 66-233
[email protected]  www.schulergroup.com / automation

You might also like