161 Sanman 5000

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

THE NEW-GENERATION TRACTOR FOR

THE NEW-GENERATION FARMER

With Real Turbo Power


Makes farming easier and farmers happier

41-50 HP Category

Sanman-5000 I Sanman-6000
Nation Wide Network
Technical Specifications
Unmatched Warranty and Service Package
Sanman-5000 Sanman-6000
Mercedes Derived Engine: ENGINE • The Force Range of tractors comes with best
Overhead camshaft Horse Power (Category) 45 HP 50 HP in class 3 years warranty and free service
Carbide tipped Rockers, package, so that one need not worry about
Type 3 Cylinder, 4 Stroke, Inline Direct Injection, Turbo Charger with Intercooler
Tappet setting not required, routine maintenance and repairs during the
Rated Engine (RPM) 2200 initial period.
saves fuel for years.
Cooling System Water Cooled
STEERING • The Force range of tractors enjoys a high
degree of commonality of parts which are easily
Type Power Steering available and repairable throughout the country.
CLUTCH
S & E Technology: Type Dual, Dry Mechanical Actuation Nationwide Dealer Network
Synchromesh gearbox &
TRANSMISSION
Epicyclic transmission – • The Force range of tractors is supported by a
Long Life, High reliability. Type Synchromesh nationwide network of over 200 dealers, fully
No of Gears 8 Forward & 4 Reverse equipped with factory trained technicians, ample
P.T.O. Speed (RPM) 540 & 1000 stock of genuine and reasonably priced spare
parts.
HYDRAULICS
Type ADDC System with Bosch Control Valve Training
Brake for Sure: Pulling Capacity from
Fully Oil Immersed Multiplate Lower Hitch Point (kg)
1450 • Full fledged training centres at our factories in
Pithampur, Akurdi and our Regional Training
Sealed Disk Brakes. Three Point Linkage CAT- II Centres conduct training programs on a regular
BRAKES basis round the year for dealer technicians.

Type Fully Oil Immersed Multiplate Sealed Disk Brakes


CAPACITY & MEASUREMENT
• Thus FORCE Customers are assured of best
uptime, irrespective of whichever part of the
Turning Radius With Brake (m) 2.95 country they are operating.
New Generation Turbo: Wheel Base (mm) 2032
With Extra torque for Length (mm) 3600 3640 Note: On account of continuous Research and development,
heavy duty performance specifications are subject to change. The data included herein is to
Width (mm) 1700 1730/1885
even at lower RPM be regarded as approximate. Accessories shown may not
Ground Clearance (mm) 365 394/430 necessarily be part of standard equipment.

Weight (with Oil & Fuel) (kg) 2020 2080/2130


TYRE SIZE
Front 6.00 x 16 7.50 x 16
International Styling: Rear 13.6 x 28 14.9 x 28 / 16.9 x 28

07122018
Comfortable controls and CAPACITIES (LITRES) Authorised Dealer’s Stamp
fully loaded with latest Engine Oil 5.5
features.
Transmission and
35
Hydraulics
Fuel Tank 54
Power Steering Oil 2

You might also like