Johndeere 3036 en

O;kolkf;d ijh{k.k fjiksVZ ( ) Lak[;k / No.
: T- 1273/1800/2019
COMMERCIAL TEST REPORT (Variant) ekg / Month : October, 2019
(;g ijh{k.k fjiksVZ 31/10/2022 rd oS/k gS।@ THIS TEST REPORT IS VALID UPTO :31/10/2022)
JOHN DEERE 3036EN TRACTOR
Hkkjr ljdkj
d`f"k ,Oka fdlku dY;k.k ea=ky;
d`f"k] lgdkfjrk ,oa fdlku dY;k.k foHkkx]
e'khuhdj.k ,oa izkS|ksfxdh izHkkx
GOVERNMENT OF INDIA
MINISTRY OF AGRICULTURE AND FARMERS WELFARE
DEPARTMENT OF AGRICULTURAL, COOPERATION & FARMER’S WELFARE,
MECHANIZATION & TECHNOLOGY DIVISION
dsUnzh; d`f"k e'khujh izf'k{k.k ,oa ijh{k.k laLFkku
VªSDVj uxj] cqnuh ¼e-iz-½ 466 445
CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE
(An ISO 9001: 2015 Certified Institute)
TRACTOR NAGAR, BUDNI (M.P.) 466445
E-mail: [email protected] Web site: http://www.fmttibudni,gov.in
Telephone: 07564-234729 FAX: 07564-234743
Page 1 of 30
JOHN DEERE 3036EN TRACTOR – Commercial (Variant)
T- 1273/1800/2019
THIS TEST REPORT IS VALID UPTO : 31/10/2022
Manufacturer : M/s. John Deere India Pvt. Ltd.

Gat No.166 - 167 & 271 - 291,
Off Pune-Nagar Road, Sanaswadi,
Pune - 412 208 (M.S.)
Location of other : M/s. John Deere India Pvt. Ltd.

manufacturing plant Survey No.501, Village-Khatamba
Jamgod, Dewas Bhopal Highway, Dewas
(Madhya Pradesh) 455115
Month: October Test Report No. T- 1273/1800/2019 Year: 2019
GOVERNMENT OF INDIA
CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE
TRACTOR NAGAR, BUDNI (MADHYA PRADESH) 466445, INDIA
E-mail: [email protected] Web site: http://www.fmttibudni.gov.in
Telephone : 07564-234729 FAX: 07564-234743
CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 2 of 30

T- 1273/1800/2019
Type of Test : COMMERCIAL (Variant)
Test code/Procedure : IS: 5994 -1998 (Reaffirmed in 2014)

and IS: 12207-2019
Period of Test : October, 2019
Test Report No : T- 1273/1800/2019
Month/Year : October, 2019
i) The results reported in this report are observed values and no corrections have
been applied for atmospheric and site conditions.
ii) The data given in this report pertain to the particular machine was selected
randomly from production line by the testing authority for test.
iii) The results presented in this report do not in any way attribute to the durability
of the machine.
iv) This report should not be reproduced in part or full without prior permission of
the Director, Central Farm Machinery Training and Testing Institute, Budni
(M.P.)
v) This is a Variant test report and, should be read in conjunction with the Test
Report of base model i.e. “John Deere 3028EN Tractor” bearing report No.
T- 1254/1781/2019 released in July, 2019.
Sl. Units Conversion Factor ABBREVIATIONS

No
1. Force: Apa As per applicant
1 kgf 9.80665 N TDC Top Dead Centre
2.20462 lbf IS Indian Standard
2. Power: LHS/RHS Left Hand Side/
Right Hand Side
1 Mechanical 1.01387metric horse Hg Mercury
power power
745.7 W Temp. Temperature
1 Metric horse 735.5 W N.R. Not recorded
power
1 kW 1.35962 Metric horse Rpm Revolutions per minute
power
3. Pressure: O.D/I.D Outer diameter/
Inner diameter
1 psi 6.895 kPa N.A. Not available/
Not applicable
2
1 kgf/cm 98.067 kPa = 735.56
PTO Power take-off
mm of Hg
2
1 bar 100 kPa = 10 N/cm
R.H. Relative Humidity
1 mm of Hg 1.3332 m-bar

T- 1273/1800/2019
CONTENTS
PAGE
1. Scope of test 05
2. Fuel & Lubricants 06
3. Essential Test 07
3.1 Specifications 07
3.2 Nominal speed 21
3.3 PTO Performance 21
4. Adjustments, Defects, Breakdowns & Repairs 22
5. Comparison Between Base Model and Variant Model 23
6. Summary of observations, comments & recommendations 26
7. Citizen charter 30
8. Applicant’s Comments 30
Annexure – I 30

T- 1273/1800/2019
Manufacturer : M/s. John Deere India Pvt. Ltd.

Gat No.166 - 167 & 271 - 291,
Off Pune-Nagar Road, Sanaswadi,
Pune - 412 208 (M.S.)
Location of other : M/s. John Deere India Pvt. Ltd.

manufacturing plant Survey No.501, Village-Khatamba Jamgod,
Dewas Bhopal Highway, Dewas (Madhya
Pradesh) 455115
Test requested by (applicant) : The manufacturer
Selected for test by : The testing authority

Place of running-in and test At manufacturer’s works
:
carried out
Duration of said running-in (h):
- Engine : 12
- Transmission : 08
Method of Selection : The test sample was selected randomly out
of five tractors from the production line by the
representative of testing authority.
1. SCOPE OF TEST
The “John Deere 3028EN” tractor had undergone “Commercial Testing” at this
Institute and a test report bearing No. T-1254/1781/2019 was released in July, 2019. Now the
applicant has submitted an application vide letter No. Nil dated 24.07.2018 for testing of “John
Deere 3036EN” tractor as a Variant of “John Deere 3028EN” tractor.
The applicant having enclosed a list of following differences in the technical
specifications between “John Deere 3028EN” and “John Deere 3036EN” tractor and
requested to test the “John Deere 3036EN” tractor as a variant of “John Deere 3028EN”
tractor.
The major features of Base model and Variant model are listed below:
S.No. Parameters Base Model Variant Model

T-1254/1781/2019,(July,2019)
1 2 3 4
1. Tractor:
Make John Deere John Deere
Model 3028EN 3036EN
2. Engine:
Make Yanmar Co. Ltd Japan Yanmar Co. Ltd Japan
Model 3TNV82A-KJPT 3TNV88-KJPT
Engine speed (Manufacturer’s recommended production setting), (rpm):
- Maximum speed at no load, 2910 to 3010 2975 to 3025
- Low idle speed 900 to 1000 925 to 975
- Speed at maximum torque 1150 to 1250 1200
3. Cylinder & Cylinder Head:
Bore/stroke, (mm) 82/84 88/90
Capacity as specified by the 1331 1642
applicant, (cc)
Compression ratio 19.2±0.5 19.1±0.5

T- 1273/1800/2019
1 2 3 4
4. Fuel system:
Injectors:
- Make Yanmar Co. Ltd Japan Yanmar Co. Ltd Japan
- Holder Number VBAM VBAM
- Nozzle number 162P165VAE1, 162P185VAE1,
YDLLA6D29 YDLLA
0 0
- Injection timing 16.3 ± 1 before TDC 17 ± 1 before TDC
5. Masses, (kg) :
Unballast mass of tractor, 480/695/1175 486/665/1151
(Front/Rear/Total), (Kg)
6. Overall dimensions , (mm)
-Length 2840 2965
-Width 1090 1105
-Height 495 505
-Minimum ground 290 287
clearance, (mm) (Below transmission oil (Below drain plug of
drain plug) transmission housing)
7. PTO Performance :
Declared maximum PTO 17.2 20.5
power, (kw)
Specific fuel consumption 294 280
corresponding to maximum
power, (g/kWh)
Maximum equivalent 86.9 108.4
crankshaft torque, (Nm)
Equivalent crankshaft torque 69.9 88.3
at maximum power, (Nm)
Subsequent to the examination of the case in light of table-2 & 3 of Indian Standard IS 12207-
2019, the following tests were considered to be carried out :
- Specification checking
- Nominal speed test
- Two hour maximum PTO power performance test, under natural ambient condition
2. FUEL AND LUBRICANTS
2.1 Fuel : The high-speed diesel oil supplied by M/s Indian

Oil Corporation Limited having density of 0.836
o
gm/cc at 15 C was used.
2.2 Lubricants:
S. As recommended by the
Particulars As used during the test
No. manufacturer
1. Engine oil SAE 15W-40 As recommended
Transmission, Hydraulic, John Deere Hy Guard Oil originally filled in the
2.
Steering and brake systems oil tractor was not changed
Grease John Deere high Servo grease MP
3. temperature/ Extreme
pressure / Non-clay grease

T- 1273/1800/2019
3. ESSENTIAL TEST
3.1. SPECIFICATIONS
3.1.1 Tractor: Base Model Variant Model

Make : John Deere John Deere
Model : 3028E N 3036EN
Variants, if any : None None
Type : Four wheeled, four wheel drive (4WD),
Standard Agricultural Tractor.
Month & Year of manufacture : BL-H 09 & 19
(November,2017) (September, 2019)
Chassis number : 1PY3028EEHA000001 1PY3036ECKA004728
Country of Origin : India India
3.1.2 Engine:
Make : Yanmar Co. Ltd Yanmar Co. Ltd Japan
Japan
Model : 3TNV82A-KJPT 3TNV88-KJPT
Type : Four stroke, liquid cooled, direct injection,
natural aspirated, diesel engine.
Serial number : CH3W13DE5446 CH3W17D218375
Engine speed (Manufacturer’s recommended production setting), (rpm):
- Maximum speed at no load, : 2910 to 3010 2975 to 3025
- Low idle speed : 900 to 1000 925 to 975
- Speed at maximum torque : 1150 to 1250 1200
Rated speed, (rpm):
- For PTO use : 2800 2800
- For drawbar use : 2800 2800
3.1.3 Cylinder & Cylinder Head:

Number : Three Three
Disposition : Vertical, inline Vertical, inline
Bore/stroke, (mm) : 82/84 88/90
Capacity as specified by the : 1331 1642
applicant, (cc)
Compression ratio : 19.2±0.5 19.1±0.5
Type of cylinder head : Monoblock Monoblock
Type of cylinder liners : Wet, Non- replaceable
Type of combustion chamber : Cavity on piston crown
Arrangement of valves : Inline, Overhead Inline, Overhead
Valve clearance (cold):
- Inlet valve, (mm) : 0.15 to 0.25 0.15 to 0.25
- Exhaust valve, (mm) : 0.15 to 0.25 0.15 to 0.25
3. 1.4 Fuel System:

Type of fuel feed system : Gravity and force Gravity and force feed
feed
3. 1.4.1 Fuel tank:
Capacity, ( l ) : 32.0 29.9
Location : Above the bell housing under the bonnet.

T- 1273/1800/2019
Base Model Variant Model

Provision for draining of :
Provided
sediments/water
Material of fuel tank : Plastic-PELLD (apa)
3. 1.4.2 Water separator:
Make : Taiyo Giken
Type : Inverted funnel gravity separation.
Location : In between fuel tank and fuel feed pump on
RHS of engine.
Capacity, (l) : 0.25 0.27
3. 1.4.3 Fuel feed pump:
Make : U-Shin
Type : Diaphragm
Model/Group combination No. : YMR No. 119225-52102
Provision of sediment bowl : Not provide
Method of drive : Electrically operated
3. 1.4.4 Fuel filters:

Make : Nippon Rokaki (apa)
Model/Group combination No : 119802-55801
Number(s) : One
Types of elements : Full flow, spin – on though away paper element.
Capacity of final stage filter, (I) : 0.35
3.1.4.5 Fuel Injection pump:

Make : Yanmar Co. Ltd Japan Yanmar Co. Ltd Japan
Model/Group Combination No. : W1985251410 C001 729235-51320 C001
Type : Mono, plunger Mono, plunger
Serial number : 20160705 20190325
Method of drive : Through timing gears Through timing gears
3.1.4.6 Fuel injector(s):

Nozzle holder no. : VBAM VBAM
Nozzle no. 162P165VAE1, 162P185VAE1,
YDLLA6D29 YDLLA
Type : Multihole (Four holes) Multihole (Five holes)

Manufacturer’s production : 21.575±0.981 21.575±0.981
pressure setting, (MPa)
Injection timing : 16.3 ± 1 degrees BTDC 17 ± 1 degrees BTDC
Firing order : 1-3-2 1-3-2
3.1.4.7 Governor:
Model/Group Combination No. : Inbuilt with fuel injection pump
Type : Mechanical, centrifugal, variable speed
Rated engine speed, (rpm) : 2800 2800
Governed range of engine : 900 to 3010 925 to 3075
speed, (rpm)

T- 1273/1800/2019
3.1.5 Air Intake System:

3.1.5.1 Pre-cleaner : Not provided
3.1.5.2 Air cleaner:
Make : Donaldson
Type : Dry
Location : In front of radiator, under the bonnet.
Range of suction pressure at :
3.4 to 3.7 1.7
maximum power, (kPa)
Details of element: Primary Secondary
- Size (OD/ID), mm : 105.3/63.5 59.0/45.0
- Length, (mm) : 265 260
- Type : Cellulose fiber paper Cellulose fiber paper
Provision of dust unloading : Provided
valve
Vacuum indicator & its range : Provided
(mm of water/mm of hg)
Maintenance schedule : Replace primary and secondary element after
every 1000 hrs. of operation.
3.1.6 Exhaust System:
Type of silencer : Downdraft (Cylindrical)
Position of silencer outlet with respect to SIP, (mm):
- Downward : 665 595
- Longitudinal : 1800 1800
- Lateral : 245 (on LHS) 245 (on (LHS)
Range of exhaust gas pressure at : 6.4 to 6.7 NR
maximum power, (kPa)
Provision of spark arresting : None None
device
Provision against entry of rain : Horizontal, downdraft opening.
water
3.1.7 Lubricating system:
Type : Forced feed-cum-splash
Oil sump capacity, (l) : 4.0 3.9
Total lub oil capacity, (l) : 4.2 4.1
Oil change period : First change after 100 hours and subsequently
after every 250 hours of operation.
Cooling device, (if any) : None
Filters:
Make : John Deere
Type : Full flow, spin-on through away paper element.
Number : One
Pump:
Type : Trochoid pump
Method of drive : Through timing gears
Pressure release setting,( kPa) : 290 (apa)
3.1.8 Cooling system:

Type : Force circulation of coolant and water
Coolant as recommended : Ethylene glycol
Coolant and water ratio : 20:80

T- 1273/1800/2019
Details of Pump : Centrifugal, open impeller of 60.0 mm diameter

having six numbers of vanes and driven
through crankshaft pulley by a cogged ‘V’-belt
common to alternator.
Details of fan : Suction type having seven polypropylene

blades of 380.0 mm diameter and mounted on
water pump shaft.
Means of temperature control : Thermostat Thermostat

Bare radiator capacity, (l) : 2.0 2.0
Expansion flask capacity, (l) : 0.8 0.8
Total coolant capacity, (l) : 4.8 4.9
Radiator cap pressure, (kPa) : 88 88
3.1.9 Starting System:

Type : 12V, DC, Electrical
Aid for cold starting : None
Any other device provided for : None
easy starting
3.1.10 Electrical System:
3.1.10.1 Battery:
Make and model : Exide & FEF1- Exide & FEF3-55D23L
55D23L (MF) (MF)
Type : Lead acid
Capacity and rating : 12V, 45 Ah at 20 hours discharge rate
Location : In-front of radiator, under the bonnet.
3.1.10.2 Starter:
Make : Denso
Model : YM129129-77010
Type : Pre-engaging, solenoid operated
Power rating, (kW) : 12V, 1.2 kW
3.1.10.3 Generator: Base Model Variant Model

Make : Bosch, India SEG
Model : F002 G90514 SJ33958
Type : Alternator
Output rating : 12V, 40 A 12V, 50 A
Method of drive : Driven through crank shaft pulley by a cogged
‘V’-belt common to water pump.
3.1.10.4 Voltage regulator : In-built in alternator

T- 1273/1800/2019
3.1.10.5 Details of lights :
Distance between
No. & capacity Height of the Size of beam, centre of the beam
Description of bulbs centre of beam (mm) and outside edge
of tractor at
above ground
standard rear
level, (mm) track setting, (mm)
Base Variant Base Variant Base Variant
model model model model model model
1 2 3 4 5 6 7 8
Front Lights:
- Head lights 2,12V,60/55W 915 915 145 x 80 145 x 80 415 415
- Parking lights 2, 12V, 5W 1160 1160 110 x 35 110 x 35 85 85
- Turn Indicators- 1195 1195 110 x 35 110 x 35 85 85
2, 12V, 21W
cum-Hazard lights
Rear lights:
-Tail light-cum- 1160 1160 110 x 35 110 x 35 85 85
2, 12V, 21/5W
brake light
- Turn Indicators- 1195 1195 110 x 35 110 x 35 85 85
2,12V, 21W
cum-Hazard lights
- Plough light
(on RHS 1, 12 V, 55 W 1230 1230 130 x 70 130 x 70 310 310
mudguard)
- Reflectors (Red) 2 1105 1105 100 x 40 100 x 40 90 90
-Registration plate
1, 12V, 5W 1050 1050 30  30  150 150
Light (RHS)
3.1.11 Instrument panel details: Base Model Variant model
i) Engine speed-cum-digital cumulative digital Provided Provided
run-hour-meter (0-35 x100 rpm)
ii) Coolant temperature gauge (with colour Provided Provided
zones)
iii) Fuel level gauge (with colour zones) Provided Provided
iv) Lubricating oil pressure indicator lamp Provided Provided
v) Light switch (Rotary type) Provided Provided
vi) Main switch (key-turn type) Provided Provided
vii) Horn push button Provided Provided
viii) Air cleaner clogging indicator Provided Provided
ix) Battery charging warning indicator lamp Provided Provided
x) Turn signal indicator & hazard Light indicator Provided Provided
xi) Turning indicator switch Provided Provided
xii) Head light (long beam) indicator lamp Provided Provided
xiii) Hazard warning switch Provided Provided
xiv) Hand accelerator lever. Provided Provided
xv) Forward – reverse gear shifting lever Provided Provided
xvi) Steering control wheel. Provided Provided
xvii) Rear view mirror Provided Provided

T- 1273/1800/2019

3.1.12 Transmission System:
3.1.12.1 Clutch:
Make : LUK, India
Type : Single, dry friction plates
No. of friction plate(s) : One
Size, (OD/ID),(mm) : 240/160 
Material of clutch lining : Organic 8402 (apa)
Method of operation By depressing the clutch pedal fully, provided on
LHS of operator’s seat.
3.1.12.2 Gear box :

Make : John Deere
Type : Mechanical, constant mesh gears
Gear shifting pattern in case : A F
of base and variant models
R
B
Forward -
Gear shift lever Range shift
Reverse gear
lever
lever
Location of gear shifting : a) Main gear shifting lever is provided on RHS
levers of the operator’s seat.
b) Range shift lever is provided on LHS of the
operator’s seat.
c) Forward - Reverse gear lever is provided on
LHS of dashboard.
No. of speeds:
- Forward : 08 08
- Reverse : 08 08
Oil capacity, ( l ) : 36.0 35.1
Common with differential, rear axle, final drive,
hydraulic, brake & steering systems.
Oil changing period : First change after 1100 hours thereafter every
1250 hours of operation
3.1.12.3 Range of nominal Speed, (Kmph) :
- Forward : 1.57 to 19.31 1.57 to 19.30
- Reverse : 1.64 to 20.09 1.65 to 20.14
3.1.12.4 Differential:
Type : Crown wheel and bevel pinion with differential
unit accommodated inside the differential
housing.
Reduction through crown :
4.556: 1 (41/9T)
wheel and pinion
Differential lock :
Type : Pin type
Location : On RHS of operator’s seat
Method of operation : By pressing a pedal provided on RHS of
operator’s seat.

T- 1273/1800/2019
3.1.12.5 Rear axle and Final Drive :

Type : Bull gear pinion
Reduction through final drive : 6.273 : 1 (69/11T)
Oil capacity of final drive, (l) : 36.0 35.1
Common with gearbox, differential, hydraulic, brake &
steering systems.
Oil changing period : First change after 1100 hrs subsequently after
every 1250 hours of operation.
3.1.12.6 Front differential:
Type : Crown wheel and bevel pinion with differential
unit accommodated inside the center of front
axle housing.
Reduction through crown : 3.36 :1 (37/11T)
wheel and pinion
Common with front axle and front final drive.
Differential lock : Not provided
3.1.12.7 Front axle and front final

drive :
Make Dana
Type Crown wheel and bevel pinion accommodated
inside the front axle housing (near front wheel
hub), Portal bevel gear.
Reduction through final drive 3.42:1 (41/12T)
Common with front differential.
3.1.13 Power lift (Hydraulic System):

Make : Mita
Identification mark : 222623 375535M
Type : Open centre, live, ADDC
No. and type of cylinder : One, single acting
Type of linkage lock for : Mechanical
transport
Hydraulic pump:
-Make : Dynamatics
-Type : External gear type
-Location & drive : On LHS of engine & through timing gears.
No. & type of filter(s) : Two, One suction strainer & one full flow spin-on
throw away type filter.
Hydraulic oil capacity, (l) : 36.0 35.1
Common with gearbox, differential, hydraulic,
brake & steering systems.

T- 1273/1800/2019
Oil change period : First change after 1100 hrs subsequently after
Provision for external tapping : Provided
Details of control levers:

Sl. No. Control level Functions
i) Position control lever To control depth of the implement.
ii) Draft control lever To control the draft of the implement.
iii) Auxiliary knob on distributor
iv) Rate of drop knob
Method of draft sensing : Through top link
3.1.13.1 Three-point linkage:
As per IS: 4468- As measured, (mm) Remarks in

Sl. (Part-1) -1997,
Observations Base Variant case of variant
No.
(Cat.I / Cat.I N), (mm) Model Model model
1 2 3 4 (a) 4 (b) 5
I. Upper hitch points:
a) Dia of hitch pin 19.30 to 19.50 / 19.43 19.40 Conforms to
hole 19.30 to 19.51 cat. 1N
b) Width of ball 44.0 (max.) / 43.9 43.89 -do-
44.0 (max.)
II. Lower hitch points:
a) Dia of hitch pin 22.40 to 22.65 / 22.46 22.61 -do-
hole 22.40 to 22.73
b) Width of ball 34.8 to 35.0 / 34.9 34.43 -do-
34.8 to 35.0
III. Lateral distance from 359 / 218 218 218 Conforms to
lower hitch point to centre cat. 1N
line of tractor
IV. Lateral movement of 100 (min) / 130 150 -do-
lower hitch points 50 (min)
V. Distance from end of 450 to 575 / 527 525 Dose not
power take-off to centre of 300 to 375 Conforms to
lower hitch point (lower Cat. 1N
links in horizontal
position)
VI. Transport height 820 (min)/ 600 (min) 801 805 Conforms to
(without force) Cat. 1N
VII. Power range 560(min)/ 595 625 -do-
420 (min)
VIII. Leveling adjustment 100 (min)/ 215 220 -do-
75 (min)
IX. Lower hitch point tyre 100 (min)/ 210 180 -do-
clearance 100 (min)
X. Lower hitch point height 200(max)/ 200 (max) 155 180 -do-

T- 1273/1800/2019
3.1.13.2 Drawbar:
3.1.13.2.1 Linkage Drawbar {Refer Fig.1}:
As measured, (mm)
As per IS: 12953-1990, Remarks in case of
Notation Base Variant
(Cat.I) / (Cat.IN), (mm) variant model
Model Model
1 2 3a 3b 4
A 683  1.5 / 400  1.5 400.5 400.5 Conforms to Cat. 1N
75 (min) / 75 (min) 76.4 76.4 Conforms to Cat. I &
B
Cat. 1N
C 30 (min) / 30 (min) 31.9 32.0 --do--
21.79 to 22.0 / 21.79 to 21.9 22.0 --do--
D
22.0
E 39.0 (min) / 39.0 (min) 39.0 43.0 --do--
F 12.0 (min) / 12.0 (min) 12.0 12.0 --do--
G 15.0 (min) /15.0 (min) 15.3 15.1 --do--
H 25  1 / 25  1 25.4 25.0 --do--
J 80  1.5 / 80  1.5 80.1 80.0 --do--
No. of 05 05 05 Conforms to Cat. 1N
holes
Fig. 1: DIMENSIONAL NOTATIONS FOR LINKAGE TYPE DRAWBAR
3.1.13.2.2 Swinging drawbar : Not provided Not provided
3.1.14 Power take-off shaft:

Type : Type-I, Not Independent
Method of engaging : By a hand lever provided on LHS of
operator’s seat.
No. of shaft(s) : One One
PTO speed corresponding to : 607 607
rated engine speed, (rpm)
Distance behind rear axle, (mm) : 250 245
Engine to PTO speed ratio : 4.615:1 4.615:1
Whether the PTO shaft is : Yes Yes
capable of transmitting the full
power of engine

T- 1273/1800/2019
3.1.14.1 Specification of power take-off shaft:

As observed Remarks in case
As per IS: 4931-1995 of variant model
Specification Base Variant
(Type-I)
Model Model
1 2 3a 3b 4
Nominal speed, 540  10 540 rpm of PTO shaft Conforms
(rpm) corresponds to 2492
rpm of engine.
No. of splines 6 6 6 --do—
Direction of Clockwise Clockwise Clockwise --do--
rotation
Location The position of the centre of Centrally Centrally Conforms
the end of PTO shaft shall be located located
within 50 mm to right or left of
the centre line of the tractor
Dimensions, (mm) [See Fig. 2(a)]:
D 34.79  0.06 34.82 34.74 Conforms
d 28.91 0.05 28.87 28.96 --do—
B 29.4  0.1 29.46 29.45 --do—
A (Optional) 8.3 NA NA --
W 8.69 - 0.09 8.66 8.69 --do—
- 0.16
a 7 7 7 --do—
b (optional) 25  0.5 NA NA --
c 38 38 38 Conform
o o o
X 30 30 30 --do—
B 76 (min) 88.0 87.0 --do—
h 450 to 675 505 506 --do—
Fig. 2 (a): DIMENSIONAL NOTATIONS FOR TYPE-I POWER TAKE-OFF SHAFT

3.1.14.2 PTO Master Shield : Provided
Dimensions of PTO master shield for type I & II PTO (mm) [See Fig. 2 (b)]
As observed Remarks
Specification As per IS 4931-1995
k 70 (min) 70 70 Conforms
m 125±5 120 125 Conforms
n 85±5 61 60 Does not Conform
p 285±5 230 235 Does not Conform
r 76(max.) 51 50 Conforms

T- 1273/1800/2019
Fig.2 (b): DIMENSIONAL NOTATIONS POWER TAKE-OFF SHAFT MASTER SHIELD
3.1.15 Towing hitch: Base Model Variant Model

3.1.15.1 Front :
Type : Clevis
Location : In front of the front axle
Not provided frame.
Height above ground level, : 490
(mm)
Number of positions : 01
Type of adjustment : None
Dia of pin hole, (mm) : 60.3
Width of clevis, (mm) : 32.6
3.1.15.2 Rear:
Type : Clevis Clevis
Location : At rear of transmission housing.
Height above ground level, (mm) : 332 344
Number of positions : 01 01
Type of adjustment : None None
Distance of hitch point, (mm):
- From rear axle centre : 355 340
- From power take-off shaft end : 250 100
Dia of pin hole, (mm) : 32.9 32.9
Width of clevis, (mm) : 65.0 64.2
3.1.16 Steering:
Make / Make of distributor : Danfoss
Type : Hydrostatic
Location : Inside console
Method of operation : Manual, by steering control wheel
Diameter of steering control 360
wheel, (mm)
Make & type of pump : Dynamatic & Gear
Location : On LHS of engine
Method of drive : Through engine timing gears
Make ,type & number of : NA, Double acting & One
hydraulic ram cylinder
Capacity, (l) : 36.0 35.1
Common with gear box, differential, rear axle &
final drive, brake & hydraulic systems.
Oil change period First change after 1100 hrs subsequently after

T- 1273/1800/2019
3.1.17 Brakes: Base Model Variant Model

3.1.17.1 Service Brake:
Make : John Deere (apa)
Type : Mechanical, Oil immersed disc brakes.
Location : On bull pinion shaft inside rear axle housing.
No. of friction disc(s) : Three (on each wheel side)
2
Area of liners, (cm ) : 583.5 (on each wheel side)
Material of liners : Paper lining (apa)
Method of operation : Independent or combined pedal operation by
right foot.
Oil capacity, (l) : 36.0 35.1
Common with gear box, differential, rear axle &
final drive, hydraulic & steering systems
Oil change period : First change after 1100 hours subsequently after
3.1.17.2 Parking Brake:
Type : Pawl & ratchet arrangement
Location & method of : By locking the service brake in position by hand
operation lever provided below RHS of dashboard.
3.1.18 Wheel Equipment:
3.1.18.1 Steered Wheel(s):
Make : MRF shakti life
Number(s) : Two
Type of tyre(s) : Pneumatic, traction
Size : 180/85 D12
Ply rating : 4
Maximum permissible loading : 220
capacity of each tyre at 110
kPa pressure, (kgf)
Recommended inflation pressure, (kPa):
- for field work : 110
- for transport : 110
Standard track width, (mm) : 900 (std.) & 925 900 (std.) & 925
Method of changing track : By reversing the wheel discs.
width
Make & size of wheel rim : WILP & 5JA x 12 WILPG & 4.50 E x 16
3.1.18.2 Drive wheel(s):
Make : MRF shakti life
Number(s) : Two
Type of tyre(s) : Pneumatic, traction
Size : 8.3-24
Ply rating : 8
Maximum permissible loading :
capacity of each tyre at 80 430
kPa inflation pressure, (kgf)
Recommended inflation pressure, (kPa):
- For field work : 80
- For transport : 80
Track width, (mm) : 845 (std.), 865, 915 & 845 (std.), 865, 925 &
925 935

T- 1273/1800/2019

Method of changing track width : By reversing wheel disc and changing the position
of disc on offset rim lugs.
Make & size of wheel rim : WILP & W7 x 24
3.1.18.3 Wheel base, (mm) : 1570

Method of changing wheel : None
base, if any, and range.
3.1.19 Operator’s seat:
Make : Harita seating system ltd.
Type : Cushioned
Type of suspension : Two helical coil springs
Type of dampening : None
Range of adjustment, (mm):
- Vertical : Nil
- Lateral : Nil
- Longitudinal : ± 25
3.1.20 Provision for safety and comfort of operator:

3.1.20.1 Conformity with IS: 12343 – 1998 (Reaffirmed in 2014) :
3.1.20.2 Conformity with IS: 6283 (Part 1 & 2)-1998 (Re-affirmed in March 2014):
All the controls are identifiable with symbols as per IS: 6283 (Part-1 & 2)-1998(Re-
affirmed in March 2014), except the following:
Base model Variant model
The colour zone for engine revolution The colour zone for engine revolution
gauge has not been provided. gauge has not been provided.
3.1.20.3 Conformity with IS: 8133-1983 (Reaffirmed in 2014):
Location and movement of various controls meets the requirement of IS: 8133-1983.
3.1.20.4 Conformity with IS: 12239 (Part -1)- 1996 (Reaffirmed in October,2017):
Meets the requirements of IS: 12239 (Part-1)-1996 (Reaffirmed in October,2017),
except the following:
i) Provision of spark arresting device i) Spark arrester in the exhaust system is
in the exhaust system. not provided.
--- ii) Subsequent steps should be provided.
3.1.20.5 Conformity with IS:12239 (Part-2)-1999 (Re-affirmed in October,2017) :

Meets the requirements of IS:12239 (Part-2)-1999, except the following:
i) Minimum Cautionary notice as per i) Minimum Cautionary notice as per
clause 11.2 of above referred clause 11.2 of above referred
standard has not been provided. standard has not been provided.
ii) The working clearance between
position control and draft control
lever has not been provided as --
per IS: 12239(Part-II) 1999.

T- 1273/1800/2019
3.1.20.6 Conformity with IS: 14683-1999 (Reaffirmed in March 2014):

Lighting meets the requirement of IS: 14683-1999 (Reaffirmed in March 2014):
3.1.20.7 Rear view mirror:

Rear view mirror has been provided
3.1.20.7 Slow moving emblem:

Slow moving emblem has been provided.
3.1.21 Mass of tractor, (Kg): Base model Variant model

- Front : 480 486
- Rear : 695 665
- Total : 1175 1151
3.1.22 Over all dimensions, (mm):

- Length : 2840 2965
- Width : 1090 1105
- Height (with exhaust pipe) : 495 505
Minimum ground clearance : 290 287
(Below transmission (Below drain plug of
oil drain plug) transmission housing)
3.1.23 Labelling of tractor as per IS: 10273-1987 (Reaffirmed in 2014):

Location of labelling plate:- The labelling plate is riveted on LHS at front axle
support and provides the following information:
Name of Manufacturer John Deere India Pvt. Ltd. , Pune,
(India)
Make John Deere
Model 3036 EN
Month & Year of manufacture 09,19 (September, 2019)
Engine Serial Number CH3W17D218375
Chassis Serial Number 1PY3036ECKA004728
Maximum P.T.O Power, kW (hp) 20.5 (27.87)
Specific fuel consumption, g/kWh 280 (207)
(g/hph)

3.1.24 Number of external lubricating points:
- Oiling : Nil Nil
- Grease cups : Nil 02
- Grease nipples : 09 06
3.1.25 Colour of tractor:
Chassis & engine : Green
Bonnet & Mudguards : Green
Wheel discs & rims Yellow

T- 1273/1800/2019
3.2 NOMINAL SPEED TEST

No. of engine Nominal speed at Nominal speed at Variation in
Movement Gear revolutions for one rated engine speed rated engine speed nominal
No. revolution of driving when fitted with when fitted with speed (%) in
wheel 8.30 - 24 size tires 8.30 - 24 size tires case of
of 470 mm radius of 470 mm radius variant
index, (kmph) index, (kmph) model
Base Variant Base Variant
model model model model
1 2 3a 3b 4 5 7
A1 315.66 316.10 1.57 1.57 +0.00
A2 238.79 238.50 2.08 2.08 +0.00
A3 123.25 123.00 4.02 4.04 +0.50
A4 93.53 93.30 5.30 5.32 +0.38
B1 86.88 86.80 5.72 5.72 +0.00
Forward B2 65.69 65.70 7.56 7.56 +0.00
B3 33.88 33.90 14.61 14.65 +0.27
B4 25.71 25.70 19.31 19.30 -0.05
RA1 302.45 300.30 1.64 1.65 +0.61
RA2 228.71 229.00 2.17 2.17 +0.00
RA3 118.15 117.20 4.19 4.23 +0.95
RA4 89.64 89.60 5.54 5.54 +0.00
Reverse RB1 83.26 83.20 5.96 5.96 +0.00
RB2 62.96 63.00 7.88 7.88 +0.00
RB3 32.52 32.40 15.27 15.31 +0.26
RB4 24.70 24.60 20.09 20.14 +0.25
3.3 PTO PERFORMANCE TEST
S. No. Particulars Base Model Variant Model
1. Date(s) of test 11.01.2019 & 14.01.2019 04.10.2019
Tractor run prior to start of PTO 3.1 21.3
2.
test, (h)
3. Dynamometer test bench used Eddy current, SAJ-AG 250 Eddy current, Schenck -
Avery W700
Maximum power two hours test under natural ambient condition was conducted. The results of Power
take-off performance test under natural ambient of base & variant models are tabulated in Table-1.
Table - 1
Speed, (rpm) Fuel Consumption Specific

Power,
energy,
(kW) PTO Engine (l/h) (kg/h) (kg/kWh)
(kWh/ l )
1 2 3 4 5 6 7 8
a) Maximum power – 2 hours test (under natural ambient condition):
Base model 17.9 607 2801 5.94 4.97 0.278 3.01
Variant model 20.7 607 2801 6.95 5.81 0.281 2.98

T- 1273/1800/2019

Sl.
Parameters Natural High Natural
No.
Ambient Ambient Ambient
i) -No load maximum engine speed,
2995 2991 3009
(rpm)
ii) -Equivalent crankshaft torque at
61.0 58.6 70.7
maximum power, (Nm )
iii) -Maximum equivalent crankshaft
79.0 73.5 89.6
torque, (Nm)
iv) -Engine speed at maximum
1098 1301 1246
equivalent crankshaft torque, (rpm)
v) - Back up torque, (%) 29.5 -- 26.7
vii) - Range of atmospheric conditions:

o
Temperature, ( C) 27 to 30 40 to 44 27 to 28
Pressure, (kPa) 99.4 to 99.7 100 to 101.0 NR
Relative humidity, (%) 34 to 40 22 to 26 48
o
viii) - Maximum temperatures, ( C):
Engine oil 89 98 116
Coolant 83 97 99
Fuel 55 67 56
Air intake 30 45 38
Exhaust gas 630 645 624
ix) - Pressure at maximum power:

Intake air, ( kPa ) 3.4 to 3.7 4.0 to 4.5 1.7
Exhaust gas, ( kPa ) 6.4 to 6.7 6.9 to 7.1 NR
x) - Consumptions:
Lub oil, (g/kwh ) -- 0.62 --
Coolant (% of total coolant capacity) -- Nil --
4. ADJUSTMENTS, DEFECTS, BREAKDOWNS AND REPAIRS
Tractor
S. No. Adjustments/Defects/Breakdowns and Repairs
run hours
--- None ---

T- 1273/1800/2019
5. COMPARISON BETWEEN BASE MODEL AND VARIANT MODEL

(Based on Table 3 & 4 of Indian Standard 12207: 2019)
Observation on
Sl. Clause base model Observation on
Features Remarks
No. No T-1254/1781/2019 variant model
(July, 2019)
1 2 3 4 5 6
1. i) Clutch Single, dry friction Single, dry friction No change
plate plate
2. ii) Air cleaner Same configuration in base & variant
No change
models except (refer para 3.1.5.2)
3. iii) Exhaust system Downdraft, (Cylindrical) No change
a) Position of silencer outlet w.r.t SIP, mm
-Downward 665 595 Changed
-Longitudinal 1800 1800 No change
-Lateral 245 (on LHS) 245 (on (LHS) No change
b) Range of 6.4 to 6.7 NR --
exhaust gas
pressure at
maximum power
(kPa)
4. iv) Gear Box:
- Type Mechanical, constant mesh gears No change
Reduction ratio of transmission:
Movement Gear Base Variant Variation (%)
Remarks
model model
Forward A1 315.66 316.10 +0.14 Similar
A2 238.79 238.50 -0.12 -do-
A3 123.25 123.00 -0.20 -do-
A4 93.53 93.30 -0.25 -do-
B1 86.88 86.80 -0.09 -do-
B2 65.69 65.70 +0.02 -do-
B3 33.88 33.90 +0.06 -do-
B4 25.71 25.70 -0.04 -do-
Reverse RA1 302.45 300.30 -0.71 -do-
RA2 228.71 229.00 +0.13 -do-
RA3 118.15 117.20 -0.80 -do-
RA4 89.64 89.60 -0.04 -do-
RB1 83.26 83.20 -0.07 -do-
RB2 62.96 63.00 +0.06 -do-
RB3 32.52 32.40 -0.37 -do-
RB4 24.70 24.60 -0.40 -do-
5. Range of speeds, (kmph):
v) - Forward 1.57 to 19.31 1.57 to 19.30 Similar
- Reverse 1.64 to 20.09 1.65 to 20.14 Similar
Additional no. of speed None None No change

T- 1273/1800/2019
1 2 3 4 5 6
6. vi) Fitment of accessories:
- Expansion tank Provided Provided No change
- Additional hydraulic
None None --do--
pump
- Air compressor None None --do--
- Radiator Provided Provided --do--
- Bare radiator capacity, (l) 2.0 2.0 --do--
- Total coolant capacity,(l) 4.8 4.9 Similar
7. vii) Brake system: Same configuration in base & variant No change
models (refer para 3.1.17)
8. viii) Type of three-point linkage:
Type Cat.I/Cat.II Cat.I/Cat.II No change
Rear/front mounted Rear mounted Rear mounted No change
9. ix) PTO shafts:
Location Centrally located Centrally located No change
Type Type-I, Not Independent No change
Speed corresponding to 607 Clockwise rotation No change
rated engine speed (rpm)
Anticlockwise rotation Not provided Not provided No change
speed (rpm)
10. x) Type of drive: 4 WD 4WD No change
11. xi) Hydraulic System:
Location & type of Same configuration in base & variant No change
Hydraulic pump drive models (refer para 3.1.13).
12. xii) Positioning of Hydraulic Sensing Mechanism:
Lower link, top link, etc. Through top link Through top link No change
13. xiii) Rear Final Reduction: 6.273 : 1 (69/11T) No change
14. xiv) Differential lock Pin type Pin type No change
15. xv) Change related to statutory/ regulatory requirements (As per Table 3):
a) Engine operating principle Compression Compression No change
(spark/ compression Ignition, 4 strokes Ignition, 4 strokes
ignition, two/four stroke)
b) Number & arrangement of Three vertical Three vertical inline No change
cylinders inline
c) PTO power, (kW) 17.2 20.5 Changed
d) Engine displacement, (cc) 1331 1642 No change
e) Rated engine speed,(rpm) 2800 2800 No change
f) Naturally aspirated/turbo Naturally Naturally aspirated No change
charged aspirated

T- 1273/1800/2019
1 2 3 4 5 6
16. Change related to ergonomics, safety comfort, and statutory / regulatory
requirements:
a) IS: 10273 Conformed Conforms No change
b) IS: 4931 Did not conform Does not conform No change
c) IS: 4468 Did not conform Does not conform No change
d) IS: 12953 Conformed Conforms No change
e) IS:12343 Not applicable as the rear track width is No change
less than 1150 mm.
f) IS:12239 (Pt-I) Did not conform Does not conform No change
g) IS:12239 (Pt-II) Did not conform Does not conform No change
h) IS:8133 Conformed Conforms No change
i) IS: 6283 Did not conform Does not conform No change
j) IS:14683 Conformed Conforms No change
17. xviii) Other changes:
a) Engine model 3TNV82A-KJPT 3TNV88-KJPT Changed
b) Model/Group W1985251410 C001 729235-51320 C001 Changed
Combination No.
of FIP
c) Nozzle no. of 162P165VAE1, 162P185VAE1, Changed
injector YDLLA6D29 YDLLA
d) Injection timing 16.3 ± 1 degrees 17 ± 1 degrees Changed
BTDC BTDC
e) Over all dimensions,(mm):
-Length 2840 2965 Changed
-Width 1090 1105 Changed
-Height 495 505 Changed
(With exhaust type) (With exhaust type)
f) Mass of tractor, 480/695/1175 486/665/1151 Changed
(F/R/T), (Kg)
g) Decals, John Deere 3028EN John Deere 3036EN Changed
(sticker)

T- 1273/1800/2019
6. SUMMARY OF OBSERVATIONS, COMMENTS & RECOMMENDATIONS
6.1 On the basis of test conducted the performance results have been summarized as
evaluative (mandatory) and non – evaluative (not mandatory) parameters applicable for
qualifying Minimum Performance Criteria as per clause-4 table-1 of Indian Standard
12207: 2019 for acceptance of tractor for the purpose of subsidies/NABARD financing
for the applicable features for this tractor model.
Values Whether
declared by As observed Variant
Category the applicant/ model
Requirements
Sl. (Evaluative requirement
meets
Characteristic as per IS: the
No. / Non-
12207-2019 require-
Evaluative) Base Variant Base Variant
ments
model Model model model
(Yes/No)
1 2 3 4 5a 5b 6a 6b 7
6.1.1 PTO Performance:
a) Maximum Evaluative Declared 17.2 20.5 17.9 20.7 Yes
power under value to be (D) (D)
2 h test, (kW ) achieved with
(Natural a tolerance
ambient of:
condition) ±5 percent
for PTO
power and
engine
power>26kW
.
±10 percent
for PTO
power and or
engine  26
kW.
b) Power at rated Non -do- 17.2 20.5 17.9 20.7 Yes
engine speed, Evaluative (D) (D)
(kW)
c) Specific fuel Evaluative +10 % 294 280 278 281 Yes
consumption (D) (D)
corresponding
to maximum
power,
(g/kWh)
d) Maximum Non  8% 86.9 108.4 79.0 89.6 No
equivalent Evaluative (D) (D)
crankshaft
torque, (Nm)
e) Back-up Evaluative 12 percent, 20 12 29.5 26.7 Yes
torque, min. (D) (D)
percent

T- 1273/1800/2019
6.1.2 Safety features :

a) Guards Evaluative Belt drives, pullies, - Provided Meets the Yes
against silencer, hydraulic requirements
pipes (As per IS 12239
moving and (Part2)
hot parts
b) Lighting Evaluative As per CMVR - Provided Meets the Yes
arrangement requirements
c) Seating Non Should meet the - Not NA NA
requirements Evaluative requirements of IS: applicable
12343 (As amended
(Tractors from time to time) as the rear
having more track width
than 1150 mm is less than
rear track 1150 mm.
width)
d) Technical Evaluative Should meet the - Conforms Meets the Yes
requirements requirements of IS: requirements
for PTO shaft 4931 (As amended
from time to time)
e) Dimensions of Non Should meet the - Does not Does not No

three point Evaluative requirements of IS: conform meet the
linkage 4468 (Part-I) (As requirements
amended from
time to time)
f) Specifications Evaluative Should meet the - Conforms Meets the Yes
of linkage requirements of requirements
drawbar IS:12953 and IS:
12362 (Part 3) (As
Swinging - -- Not Provided --
amended from time
drawbar to time)
h) 1) Maximu Evaluative Should not exceed - Conforms Meets the Yes
m 20 kmph requirements
travelling
speed at
rated
engine
speed in
reverse
gear,
(kmph)
2) Audible Evaluative As soon as the - Not Not --
warning travelling speed in applicable applicable
reverse gear reaches
signal on to 20 kmph, an audible
tractor warning signal on
tractor shall be
activated.
The safety aspects
about the operation of
shuttle technology
shall be brought in
operation and
manufacturer/dealer
shall ensure the
training on this aspect
to operator before the
delivery of tractor.

T- 1273/1800/2019
6.1.3 Labelling of tractors (Provision of labelling plate):

1) Make Evaluative Should conform -- JOHN DEERE Yes
to the
2) Model Evaluative requirements of -- 3036EN Yes
3) Engine Evaluative CMVR along with -- CH3W17D218375 Yes
number maximum PTO
4) Chassis Evaluative Power in kW and -- 1PY3036ECKA004728 Yes
number year of
manufacture in
5) Declaration Evaluative numerical form. -- 20.5 Yes
of PTO
power, (kW) MM YY
6) Month & Year Evaluative Digit 01 – 12 in --
09 19 Yes
of box No.1 for MM
manufacturing will represent
the months and
next two digits in
box No.2 for YY
will represent the
year of
manufacturing.
6.1.4 Literature (Submission to test agency)
(a) Operator manual Evaluative Provided / Provided Provided Yes
Not Provided
(b) Parts Catalogue Evaluative Provided / Provided Provided Yes
Not Provided
(c) Workshop/ Evaluative Provided / Provided Provided Yes
Service manual Not Provided
6.2 Salient Observations:

6.2.1 Laboratory tests:
6.2.1.1 PTO Performance:
i) The maximum PTO power was observed as 20.7 kW against the declaration
of 20.5 kW, which meets the requirement of IS: 12207-2019 with regard to
tolerance limit.
ii) The specific fuel consumption corresponding to maximum power was
recorded as 281 g/kWh against the declaration of 280 g/kWh, which is within
the tolerance limit of IS: 12207-2019.
iii) The maximum equivalent crankshaft torque was recorded as 89.6 N-m against
the declaration of 108.4 N-m, which does not meet the requirement of IS:
12207:2019 with regard to tolerance. This should be looked into for necessary
corrective action.
iv) The backup torque is 26.7%.
6.2.1.2 Three Point Linkage:

i) The distance from end of power take - off to centre of lower hitch point of
tractor does not meet the requirement of IS: 4468 (Part-1)-1993 (Reaffirmed
2014). This should be looked into for necessary corrective action.

T- 1273/1800/2019
6.2.1.3 PTO Master Shield :

The dimension “n” & “p” of PTO master shield does not meet the requirements of IS:
4931-1995 (Reaffirmed 2014). This should be looked into for necessary corrective
action.
6.2.1.4 Operator’s work place:

Operator’s work place meets the requirements of IS: 12239 (Part-1)
1996(Reaffirmed Oct., 2017), except the following:
i) Provision of spark arresting device in the exhaust system.
6.2.1.5 Symbols of operator’s controls and other displays:

All controls are identifiable with the symbols as per IS: 6283 (Part 1&2)-1998, except
the caution and the color zones for the engine revolution gauge has not been
provided. This needs to be looked into for necessary corrective action.
6.3 Maintenance / Service problems:

No noticeable maintenance and service problems was observed during the test.
6.4 Recommendation with regard to safety on tractor:

The following requirements, inter alia, may be considered for incorporation on the
tractor as per relevant Indian Standards:
i) Provision for spark arresting device in exhaust system.
ii) “Minimum cautionary notice” as per clause 11.2 of IS: 12239 (part-2)-1999.
iii) Provision of color zones for the engine revolution gauge.
6.5 Adequacy of Literature:

6.5.1 The following literatures were supplied with the test tractor for reference during the
test:-
a) Operator’s manual for (3028EN & 3036EN tractor models).
b) Technical/workshop manual for (3028EN & 3036EN tractor models).
c) Parts Catalogue for (3028EN & 3036EN tractor models).
The supplied literature was found adequate. However, these literatures should be
brought out in national as well as other regional languages of India for guidance of
users.
As per clause 8.1.1 of IS: 12207-2019, the optional features

inspected/verified on the base model shall be deemed to be fitted on this
variant model. The results of the tests carried out on variant model “John Deere
3036EN” has been compared with those on base model “John Deere 3028EN”
and found within the limit, as specified in Indian Standard: 12207-2019.

T- 1273/1800/2019
7. CITIZEN CHARTER
Time frame for Duration of Test Whether the Test Report is Remarks
Testing & released within the time frame
Evaluation as per given in Citizen Charter
Citizen Charter
01, Months
10 Months Yes None
(October, 2019)
TESTING AUTHORITY:
C.V. CHIMOTE
SHWETABH SINGH
TEST ENGINEER
AGRICULTURAL ENGINEER
J.J.R. NARWARE
DIRECTOR
8. APPLICANT’S COMMENTS
Para No. Our Reference Applicant’s comments

8.1 6.2.1.1(iii), 6.2.1.2(i), 6.2.1.3, Your valuable comments and suggestions for
6.2.1.4 & 6.2.1.5 improvements are well taken. Under the policy
of continuous product improvement these
aspects are further being examined and will try
to eliminate soon wherever necessary.
ANNEXURE -I
TRACTOR RUN HOURS DURING TEST
A. LABORATORY AND TRACK TESTS: HOURS

1. Running-in 20.0
2. PTO performance test 3.93
3. Nominal speed test 0.75
B Miscellaneous test and other run hours including idle run, 0.42
transportation, preparation for test and trial runs.
TOTAL: 25.10

Johndeere 3036 en

Uploaded by

Copyright:

Available Formats

Johndeere 3036 en

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Johndeere 3036 en

Uploaded by

Copyright:

Available Formats

O;kolkf;d ijh{k.k fjiksVZ ( ) Lak[;k / No.

JOHN DEERE 3036EN TRACTOR

Telephone: 07564-234729 FAX: 07564-234743

Manufacturer : M/s. John Deere India Pvt. Ltd.

Location of other : M/s. John Deere India Pvt. Ltd.

Month: October Test Report No. T- 1273/1800/2019 Year: 2019

E-mail: [email protected] Web site: http://www.fmttibudni.gov.in

Telephone : 07564-234729 FAX: 07564-234743

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 2 of 30

Type of Test : COMMERCIAL (Variant)

Test code/Procedure : IS: 5994 -1998 (Reaffirmed in 2014)

Sl. Units Conversion Factor ABBREVIATIONS

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 3 of 30

2. Fuel & Lubricants 06

3.2 Nominal speed 21

3.3 PTO Performance 21

4. Adjustments, Defects, Breakdowns & Repairs 22

5. Comparison Between Base Model and Variant Model 23

6. Summary of observations, comments & recommendations 26

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 4 of 30

Manufacturer : M/s. John Deere India Pvt. Ltd.

Location of other : M/s. John Deere India Pvt. Ltd.

Test requested by (applicant) : The manufacturer

Selected for test by : The testing authority

S.No. Parameters Base Model Variant Model

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 5 of 30

2. FUEL AND LUBRICANTS

2.1 Fuel : The high-speed diesel oil supplied by M/s Indian

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 6 of 30

3.1.1 Tractor: Base Model Variant Model

3.1.3 Cylinder & Cylinder Head:

3. 1.4 Fuel System:

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 7 of 30

Base Model Variant Model

3. 1.4.4 Fuel filters:

3.1.4.5 Fuel Injection pump:

3.1.4.6 Fuel injector(s):

Type : Multihole (Four holes) Multihole (Five holes)

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 8 of 30

Base Model Variant Model

3.1.5 Air Intake System:

3.1.8 Cooling system:

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 9 of 30

Base Model Variant Model

Details of Pump : Centrifugal, open impeller of 60.0 mm diameter

Details of fan : Suction type having seven polypropylene

Means of temperature control : Thermostat Thermostat

3.1.9 Starting System:

3.1.10 Electrical System:

3.1.10.3 Generator: Base Model Variant Model

3.1.10.4 Voltage regulator : In-built in alternator

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 10 of 30

3.1.10.5 Details of lights :

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 11 of 30

Base Model Variant Model

3.1.12.2 Gear box :

CENTRAL FARM MACHINERY TRAINING & TESTING INSTITUTE - BUDNI Page 12 of 30

Base Model Variant Model