THE PRESIDENT’S OFFICE

REGIONAL ADMINISTRATION AND LOCAL GOVERNMENT

THE CITY COUNCIL OF DODOMA

FORM TWO PRE-NATIONAL EXAMINATION, 2020

PHYSICS
TIME: 2.30 HOURS OCTOBER 2020

INSTRUCTIONS
1. This paper consists of sections A, B and C.
2. Answer ALL questions.
3. ALL answers should be written in the spaces provided.
4. Read the instructions given in each section carefully
5. Write your examination number at the top right corner of every page.
6. ALL writing must be in blue or black ink EXCEPT drawings which must be in pencil.
7. Cellphones and calculators are not allowed in the examination room.
8. You may use the following constants in your calculations:
Density of water = 1 g/cm3 or 1000 kg/m3
Acceleration due to gravity: g = 10 m/s2
Density of mercury = 13.6 g/cm3 or 13600 kg/m3

SECTION A (20 MARKS)

1. Write the letter of the correct answer in the box provided.
(i) The following are fundamental quantities in mechanics except.
A. length B. mass
C. time
D. weight.
(ii) Which of the following groups represent forces?
A. Acceleration, energy and light
B. Energy, heat and upthrust
C. Friction, gravity and upthrust
D. Gravity, light and velocity.
(iii) Sustainable energy sources are:
A. biogas, kinetic energy and petrol
B. biogas, tidal energy and water energy
C. firewood, petrol and tidal energy
D. kerosine, nuclear energy and water energy.
(iv) The best test for a magnetized material is:
A. attraction
B. friction
C. heating
D. repulsion.
(v) The type of light beam produced by the sun is
Page 1 of 4
 A. Converging
B. diverging
C. parallel
D. radial.
(vi) What makes the last drop of tap water remain hanging for sometime at the outlet of the tap soon
after closing the tap?
A. Capillarity
B. Osmosis
C. Surface tension
D. Viscosity.
(vii) A vernier caliper reads 6.23 cm. The reading in millimeters on the vernier scale is:
A. 0.03
B. 0.3
C. 2.3
D. 6.2

(viii) A clinical thermometer differs from other thermometers because it

A. can be used to measure the temperature of ice
B. can be used to measure the temperature of melting iron
C. has a constriction
D. is very small.
(ix) A potential difference of 12 V is applied across a resistor of 120 Ω, the current in the circuit is
A. 0.1 A B. 10 A
C. 132 A D. 440
(x) A plane mirror always forms:
A. inverted virtual image B. magnified lateral image C. real lateral image
D. virtual lateral image.
(xi) The volume of a piece of metal with a mass of 150 g and density of 0.03 g/cm 3 is: A. 5x
10-3 cm3
B. 5 x 101 cm3
C. 5 x 102 cm3
D. 5 x 103 cm3
(xii) A liquid at 100°C is as hot as:
A. 200°F B. 212°F C. 219°F D. 260°F
(xiii) Work and energy have the same SI unit called:
A. calorie. B. joule C. pascal D. watt.
(xiv) When charging bodies by friction, the particles which are transferred are:
A. electrons. B. neutrons C. neutrons and protons
D. protons and electrons.
xv) First Aid is an immediate assistance or care given to a sick person or an accident victim before getting
A. help from nearby people
B. professional medical help
C. relatives and friends’ assistance
D. traditional medical care.
(xvi) The area under the velocity-time graph represents:
A. acceleration B. distance covered C. speed D. velocity.
(xvii) A machine has a velocity ratio of 15. If an effort of 10 N is applied to lift a load of 50 N, its efficiency
is approximately equal to:
A. 20%
B. 33%
C. 50%
D. 75%
Page 2 of 4
(xviii) When reading the volume of water in a burrete, one needs to look at the: A.
highest point of the meniscus
B. lowest point of the meniscus
C. mid point of the highest meniscus
D. mid point of the lowest meniscus.
(xix) The property of a material to recover its original shape and size on removal of a stretching
force is called:
A. compression B. elasticity C. elastic limit
D. plasticity.
(xx) When buying sugar from a shop you pay for its:
A. density B. mass C. volume D. weight.

SECTION B (40 MARKS)

2. Match each item in List A with a response in List B by writing its
letter below the number of the corresponding item in the spaces
provided.
LIST A LIST B

i) Supplies electrical energy …………. A)

ii) Convert electric energy to heat and Light B)
…………….
iii) Impedes the flow of current…………… C) G
iv) Detects the presence of current……….
v) Measure potential difference………. D)
vi) Store charge……….. E)
vii) Measures current……….
viii) Open and closes a circuit………… F) A
G)

H) V

I.)

J)

K.

3. Complete each of the following statements by writing the correct

answer in the space provided.
(i) The product of mass and velocity of a body is called .
(ii) Claw hammers and pairs of scissors are in which class of levers?
(iii) Weight has the same SI unit as .
(iv) An instrument used to measure pressure of a gas is known as
(v) The tendency of a liquid to rise in narrow tubes is called .
4. (a) Define the following terms as applied in measurements and give
two examples:
(i) Fundamental quantities
(ii) Derived quantities
(b) Figure 2 shows a graduated cylinder containing water before and after a stone is immersed.

Page 3 of 4
 Figure 2
If the mass of the stone is 50 g, calculate the
(i) Volume of the stone. (ii) Density of the stone.

5. (a) (i) List two characteristics of images formed by plane

mirrors.
(ii) Giver a reason why the sky appears blue during a clear sunny day?
(b) Draw the diagram of each of the following:
(i) Parallel rays of light.
ii) Divergent rays of light.
(iii) Convergent rays of light.
6. (a) Define the following terms as used in Physics and give their SI
units:
(i) Work
(ii) Energy
(b) A man lifts a load of 20 kg through a height of 4 m in 10 seconds. Calculate the:
(i) Work done.
(ii) Power developed by the man

SECTION C (40 MARKS)

7. (a) Define the following terms as applied to machines:
i) Load
(ii) Effort
(iii) Efficiency
(b.A load of 500 N is raised through 5 m by a machine when its effort moves simultaneously though a
distance of 25 m. If the efficiency of the machine is
80%, calculate its mechanical advantage.
8. (a) (i) State the law of conservation of linear momentum.
(ii) Define the term “elastic collision”.
(b) A body of mass 8 kg moving with a velocity of 20 m/s collides with another body of mass 4 kg moving
with a velocity of 10 m/s in the same direction. The velocity of the 8 kg body is reduced to 15 m/s after
the collision. If the bodies do not stick together after the collision, calculate the final velocity of the 4 kg
body.
9. (a) Differentiate a ray of light from a beam of light.
(b) Mention four properties of an image formed by a plane mirror.
10. (a) State the law of magnetism.
(b) For each of the following, sketch the resulting magnetic field and mark the position of the neutral
point if any, when:
(i) Two N-poles are brought close to each other but not touching.
(ii) N-pole and S-pole are brought close to each other but not touching.

Page 4 of 4