EDI MaxAir PVC Spec Sheet
EDI MaxAir PVC Spec Sheet
EDI MaxAir PVC Spec Sheet
MaxAir coarse bubble diffuser offers proven design and is ideal for both
mixing and aeration applications
• Inverted air chamber design for uniform air • Patented Spectrum™ diffuser mount for
release over a wide airflow range maximum strength and ease of installation
• Full 48 inch air release perimeter on any pipe material
• High airflow capacity • Spectrum diffuser mount available for 3 to 8
inch pipe (metric sizes are not available)
• Available in 24 inch length
• Simplex or duplex configuration
• Clog resistant self-purge design
• Standard sizes IN STOCK for immediate
• Standard open bottom and optional deflector
shipment
bottom designs available
• PVC or optional CPVC construction for
maximum chemical and temperature
resistance versus steel
• Rugged heavy duty construction with full 3
inch connection (stronger than stainless steel)
1
4 3
1. Diffuser Body
2. Standard Open Bottom
3. Full 3 inch Diameter Mount
4. Multi-Level Air Metering Orifices
Diffuser Type Design Airflow Diffuser Length Orifice Size Dry Weight Net Operating Buoyancy
scfm m3N/h in mm ft2 m2 lb kg lb kg
Simplex 0-50 0-79 32.0 813 Orifice engineered 6.0 2.7 11 4.9
appropriately for
Duplex 0-100 0-158 64.0 1630 each project. 11 5.0 17 7.7
• The approximate operating pressure of the diffuser at the mid-range is 2-4 inches (0.5-1.0 kPa).