Scribd
Upload
86 views2 pages

190-lb Capacity OPL Dryer: Standard Features

The document provides specifications for the M190 OPL dryer from Milnor. It has a 190 lb capacity and uses a 3 HP motor. Standard features include an easy to use microprocessor control panel. It is engineered for durability with permanently lubricated bearings and a powder-coated cabinet. Optional features allow for a stainless steel interior or reversible tumbler.

Uploaded by

Mateo Quispe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
86 views2 pages

190-lb Capacity OPL Dryer: Standard Features

The document provides specifications for the M190 OPL dryer from Milnor. It has a 190 lb capacity and uses a 3 HP motor. Standard features include an easy to use microprocessor control panel. It is engineered for durability with permanently lubricated bearings and a powder-coated cabinet. Optional features allow for a stainless steel interior or reversible tumbler.

Uploaded by

Mateo Quispe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

M190

190-lb Capacity OPL Dryer

OPL
Standard Features:
• 190-lb. capacity
• 61.20 cu. ft. volume
• 590,000 Btu/hr heat input and 4,200 cfm
• Radial airflow
• Steel door with gasketless glass
• Self diagnostic microprocessor with
patented auto drying feature
• Easy access to lint compartment
• Available in gas and steam heat
• F.S.S. (Fire Suppression System)

Optional Features:
• Stainless steel front, cabinet & basket
• Reversing basket
M190 OPL Dryer
Why Purchase Milnor M190?

Engineer Driven Design That is Built to Last


Our dryers showcase an engineer-driven approach to design. Bearings are permanently lubricated on the motor and drive
system. There are no chains used; rather, we use V-belts and pulleys for smooth, quiet, and trouble free operation. Our dryer
cabinets are electrostatically powder-painted inside and out then baked at 420-degrees fahrenheit before final assembly -
ensuring the hardest surface and the longest lasting finish in the industry.

Rugged Steel Door with Gasketless Door Glass


Our dryer doors are one solid piece of steel with gasketless glass. This eliminates the issue of glass falling out due to wear and
tear on rubber gaskets that some manufacturers use to secure their glass. The security and durability that gasketless glass
provides is essential to a successful laundromat operation.

Easy-to-Read, Multilingual Controls


Our dryers were on of the first computer operated dryers on the market and continue to apply innovative technology to dryer
operation. Our accessible design, easy-to-read LED screens and our user friendly multilingual interface positions Milnor as a
leader in the laundry industry.

Your local Milnor independent authorized dealer.

www.milnor.com
Milnor_AD Spec Sheets-OPL.indd 16 8/19/2011 1:32:23 PM
M190
M190 Specifications
Tumbler Capacity (dry weight) 190 lbs. (86.18 kg)
Tumbler Diameter 55-5/8” (141.29 cm)
Tumbler Depth 43-1/2” (110.49 cm)
Tumbler Volume 61.20 cu ft (1732.99 L)
Tumbler/Drive Motor 3 hp (2.24 kW)
Blower/Fan Motor 7-1/2” hp (5.59 kW)
Door Opening (Diameter) 31-3/8” (79.71 cm)
Door Sill Height 36” (91.44 cm)
F.S.S. Water Connection 3/4”-11.5 NH
Dryers per 20’/40’ Container 3/7
Dryers per 48’/53’ Truck 8/8
Width 60” (152.4 cm)
Depth 49-3/4” (126.4 cm)
Height 106” (269.2 cm)
Airflow 4,200 cfm (118.9 cmm)
Exhaust Connection 20” (50.80 cm) REAR VIEW

GAS MODEL:
Approx. Net Wt. 2,100 lbs (952.54 kg)
Approx. Ship Wt. 2,166 lbs (982.48 kg)
Heat Input 590,000 btu/hr (148,678 kcal/hr)
Inlet Pipe Connection 1-1/2” F.N.P.T.

STEAM MODEL:
Approx. Net Wt. 2,2349 lbs (1,065.49 kg)
Approx. Ship Wt. 2,515 lbs (1,140.78 kg)
Steam Consumption 465 lb/hr (210.9 kg/hr)
Operating Steam Pressure 125 psi max (8.62 bar)
Exhaust Connection (Diameter) 20” (50.80 cm)
Boiler Horsepower (Normal Load) 14.5 Bhp
Compressed Air Volume 4.25 cfh (0.12 cmh)
Supply Connection (2) 1-1/4” M.N.P.T.
Return Connection (2) 1” M.N.P.T.

Specifications in parentheses are metric equivalents. 10/28/10


* Reversing dryer available with 3-phase (3ø) 1/2 hp (0.373 kW) motors standard.
**Size of piping to dryer varies with installation conditions. Contact factory for assistance.
***Specify air-operated or electromechanical steam damper system. Air-operated steam
damper system must be provided with clean,dry, and regulated 80 psi + _ 10psi
(5.52 bar +

_ 0.68 bar) air supply.

Electrical Service Specifications


SERVICE WIRE APPROX AMP DRAW CIRCUIT
PHASE
VOLTAGE SERVICE 60 Hz 50 Hz BREAKER

GAS & STEAM (non-reversing)


100 1ø 2 8.0 9.4 15
115 1ø 2 8.7 -- 15
208 1ø 2 5.2 -- 15
220 1ø 2 4.8 3.8 15
240 1ø 2 -- 5.6 15
208 3ø 3 3.0 -- 15
230 3ø 3 3.3 4.2 15
240 3ø 3 3.2 3.6 15
380 3ø 4* -- 2.2 15
400 3ø 4* -- 2.3 15
416 3ø 3 -- 2.3 15
460 3ø 3 2.1
480 3ø 3 2.1 -- 15
GAS & STEAM (reversing)
208 3ø 3 5.0 5.0 5.0
220 3ø 3 -- -- --
PLAN VIEW
240 3ø 3 5.6 5.6 5.6
380 3ø 4* -- -- --
400 3ø 4* -- -- --
416 3ø 4* -- 3.6 15 Pellerin Milnor Corporation, PO Box 400, Kenner, LA 70063 USA,
Phone 504.712.7656 Toll Free: 800.469.8780 Fax: 504.468.3094
* Specifications are subject to change without notice or obligation. Contact ADC for dimensions not shown or for clarification.

www.milnor.com
Milnor_AD Spec Sheets-OPL.indd 17 8/19/2011 1:32:24 PM

You might also like