RTL8723AS: User 'S Manual

RTL8723AS
User’s Manual
Rev. 1.0
10 Jan. 2012
Realtek Semiconductor Corp.

No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
Tel.: +886-3-578-0211. Fax: +886-3-577-6047
www.realtek.com.tw
RTL8723AS
User Manual of combo module
COPYRIGHT
© 2011 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means without the written permission of Realtek Semiconductor Corp.
DISCLAIMER
Realtek provides this document “as is”, without warranty of any kind, neither expressed nor implied,
including, but not limited to, the particular purpose. Realtek may make improvements and/or changes in this
document or in the product described in this document at any time. This document could include technical
inaccuracies or typographical errors.
TRADEMARKS
Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document are
trademarks/registered trademarks of their respective owners.
USING THIS DOCUMENT

This document is intended for the software engineer’s reference and provides detailed programming
information.
Though every effort has been made to ensure that this document is current and accurate, more information
may have become available subsequent to the production of this guide. In that event, please contact your
Realtek representative for additional information that may help in the development process.
ii Rev.1.0
RTL8723AS
Table of Contents
1. GENERAL DESCRIPTION ................................................................................................................................................ 1
1.1. .............................................................................................................................................................................................. 1
2. FEATURES ............................................................................................................................................................................... 1
1.2. ENVIRONMENTAL ............................................................................................................................................................ 5
1.2.1. Operating ............................................................................................................................................................... 5
1.2.2. Storage.................................................................................................................................................................... 5
1.3. FUNCTIONAL SPECIFICATIONS .......................................................................................................................................... 5
1.4. WARNING ........................................................................................................................................................................ 7
4.5.1 Federal Communication Commission Interference Statement ...................................................................................... 7
4.5.2 Industry Canada Statement .......................................................................................................................................... 8
4.5.3 NCC 警語 ................................................................................................................................................................... 11
List of Tables
TABLE 2. FUNCTIONAL SPECIFICATIONS ........................................................................................................................................ 5
List of Figures
iii Rev.1.0
RTL8723AS
1. General Description
1.1.
The Realtek is a highly integrated single-chip for 802.11n Wireless LAN and Bluetooth 2.1/3.0/4.0.It was
composed of MAC, baseband, and RF, providing a complete solution for a high-performance integrated
WLAN and BT. There are two kind of interface operation: one is SDIO for WLAN and UART for BT. The
other one is USB for both WLAN and BT.(USB multi-function)
The integration provides better coordination between 802.11 and Bluetooth, and with sophisticated
dynamic power control and packet traffic arbitration, is able to provide the best coexistence performance.
also integrates RF/PA/LNA for both of 802.11n and Bluetooth, so the external part numbers is reduced to
minimum.
The 802.11 part supports 150Mbps PHY rate and delivers reliable throughput from an extended distance.
The Bluetooth part supports latest 3.0+HS/4.0+LE operation and provides smooth user experience under all
usage scenarios. Optimized RF architecture and baseband algorithms provide superb performance and
lowest power consumption.
2. Features
2.1 General
 68-pin QFN
 CMOS MAC, Baseband PHY, and RF in a single chip for IEEE 802.11b/g/n compatible WLAN
 Complete 802.11n solution for 2.4GHz band
 72.2Mbps receive PHY rate and 72.2Mbps transmit PHY rate using 20MHz bandwidth
 150Mbps receive PHY rate and 150Mbps transmit PHY rate using 40MHz bandwidth
 Compatible with 802.11n specification
 Backward compatible with 802.11b/g devices while operating in 802.11n mode
 Qualified Bluetooth v2.1+EDR and v3.0+HS Systems
 Support for v4.0 Bluetooth Low Energy
 Integrated class1, class2, and class3 PA and modem in Bluetooth Controller
1 Rev.1.0
RTL8723AS
Standards Supported
 IEEE 802.11b/g/n compatible WLAN
 IEEE 802.11e QoS Enhancement (WMM)
 IEEE 802.11h TPC, Spectrum Measurement
 802.11i (WPA, WPA2). Open, shared key, and pair-wise key authentication services
 Cisco Compatible Extensions (CCX) for WLAN devices

Host Interface
 SDIO for WLAN / UART for BT
 Multi-function USB for WLAN and BT

WLAN MAC Features
 Frame aggregation for increased MAC efficiency (A-MSDU, A-MPDU)
 Low latency immediate High-Throughput Block Acknowledgement (HT-BA)
 Long NAV for media reservation with CF-End for NAV release
 PHY-level spoofing to enhance legacy compatibility
 Power saving mechanism
 Channel management and co-existence
 Multiple BSSID feature allows the RTL8723AS to assume multiple MAC identities when used as a
wireless bridge
 Transmit Opportunity (TXOP) Short Inter-Frame Space (SIFS) bursting for higher multimedia
bandwidth
WLAN PHY Features
 IEEE 802.11n OFDM
 One Transmit and one Receive path (1T1R)
 20MHz and 40MHz bandwidth transmission
 Short Guard Interval (400ns)
2 Rev.1.0
RTL8723AS
 DSSS with DBPSK and DQPSK, CCK modulation with long and short preamble
 OFDM with BPSK, QPSK, 16QAM, and 640QAM modulation. Convolutional Coding Rate: 1/2, 2/3,
3/4, and 5/6
 Maximum data rate 54Mbps in 802.11g and 150Mbps in 802.11n
 Switch diversity for DSSS/CCK
 Hardware antenna diversity
 Selectable receiver FIR filters
 Programmable scaling in transmitter and receiver to trade quantization noise against increased
probability of clipping
 Fast receiver Automatic Gain Control (AGC)
 On-chip ADC and DAC

BT Controller
 Integrated MCU to execute Bluetooth protocol stack
 Support 3 SCO links simultaneously
 Support 3 scatternets
 Enhanced BT/WIFI Coexistence Control to improve transmission quality in different profiles
 Bluetooth Low Energy Dual Mode support

Bluetooth Transceiver Features
 Fast AGC control to improve receiving dynamic range
 Support AFH to dynamically detect channel quality to improve transmission quality
 Integrated internal class1, class2, and class3 PA
 Bluetooth 3.0 compliant
 Bluetooth Low Energy supported
 Integrated 32K oscillator

Peripheral Interfaces
 General Purpose Input/Output (11 pins)
3 Rev.1.0
RTL8723AS
 4-wire EEPROM control interface (93C46)
 Three configurable LED pins
 Configurable Bluetooth Coexistence Interface
4 Rev.1.0
RTL8723AS
1.2. Environmental
1.2.1. Operating
Operating Temperature: 0 to 70 C
Relative Humidity: 5-90% (non-condensing)
1.2.2. Storage
Temperature: -55 to 125 C
Relevant Humidity: 5-95% (non-condensing)
1.3. Functional Specifications

Table 1. Functional Specifications
WiFi:
IEEE 802.11b, IEEE 802.11g, Draft IEEE 802.11n, IEEE 802.11d,
Standards IEEE 802.11e, IEEE 802.11h, IEEE 802.11i
BT:
BT v3.0, v4.0
SDIO for WiFi and UART for BT
Bus Interface
Multi-function USB for WiFi and BT
Form Factor Half Size Mini Card
802.11b:
11, 5.5, 2, 1 Mbps;
802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rate 802.11n:
MCS 0 to 7 for HT20MHz;
MCS 0 to 7 for HT40MHz
BT:
1/2/3 Mbps
WiFi:
CSMA/CA with ACK
Media Access Control
WiFi + BT:
AFH, Time Division
802.11b:
CCK, DQPSK, DBPSK
802.11g:
64 QAM, 16 QAM, QPSK, BPSK
Modulation Techniques
802.11n:
BPSK, QPSK, 16-QAM, 64-QAM
BT:
GFSK, /4 DQPSK, 8DPSK
WiFi:
Network Architecture Ad-hoc mode (Peer-to-Peer )
Infrastructure mode
5 Rev.1.0
RTL8723AS
WiFi 2.4GHz:
11: (Ch. 1-11) – United States
13: (Ch. 1-13) – Europe
Operating Channel
13: (Ch. 1-14) – Japan
BT 2.4GHz:
Ch. 0 ~78
Frequency Range 2.400GHz ~ 2.4835 GHz
WiFi :
WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE
Security 802.11x, IEEE 802.11i
BT:
Simple Paring
Operating Voltage 3.3 V ±9% I/O supply voltage
6 Rev.1.0
RTL8723AS
1.4. Warning
4.5.1 Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through
11.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna,
3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied
firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain
change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
7 Rev.1.0
RTL8723AS
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer considered
valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling

This transmitter module is authorized only for use in device where the antenna may be installed such that 20
cm may be maintained between the antenna and users. The final end product must be labeled in a visible
area with the following: “Contains FCC ID: TX2-RTL8723AS”.
Manual Information To the End User

The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
4.5.2 Industry Canada Statement

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation of the
device
French translation:
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts
de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire
de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
This device has been designed to operate with an antenna having a maximum gain of 5dBi.
Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required
antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that
the EIRP is not more than required for successful communication.
French translation:
Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximum de 5 dBi. Une antenne
à gain plus élevé est strictement interdite par les règlements d'Industrie Canada. L'impédance d'antenne
This radio transmitter (identify the device by certification number,
8 or model number if Category II) has been approved by Industry
Rev.1.0
Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for
each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for
that type, are strictly prohibited for use with this device.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du
matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et
ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette
liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
RTL8723AS
requise est de 50 ohms.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectriqueà l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire àl'établissement d'une communication satisfaisante.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
French translation:
NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles)
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna,
3) For all products market in Canada, OEM has to limit the operation channels in CH1 to CH11 for 2.4G
band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user
regarding to Regulatory Domain change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed.
French translation :
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour
utilisation de dispositif module)
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les
utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne,
3) Pour tous les produits vendus au Canada, OEM doit limiter les fréquences de fonctionnement CH1 à
CH11 pour bandes de fréquences 2.4G grâce aux outils de microprogrammation fournis. OEM ne doit pas
9 Rev.1.0
RTL8723AS
fournir d'outil ou d'informations à l'utilisateur final en ce qui concerne le changement de réglementation de
domaine.
Tant que les 3 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas
nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour
toutes exigences de conformité supplémentaires requis pour ce module installé.
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the IC authorization is no longer considered
valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC
authorization.
French translation:
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations
d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est
plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances,
l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une
autorisation distincte au Canada.
End Product Labeling

This transmitter module is authorized only for use in device where the antenna may be installed such that 20
cm may be maintained between the antenna and users. The final end product must be labeled in a visible
area with the following: “Contains IC: 6317A-RTL8723AS”.
French translation:
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être
installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le
produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC:
6317A-RTL8723AS ".
Manual Information To The End User

The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
10 Rev.1.0
RTL8723AS
French translation:
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon
d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce
module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements
comme indiqué dans ce manuel.
4.5.3 NCC 警語
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功
率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並
改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電
機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
本模組於取得認證後將依規定於模組本體標示審合格籤。
系統廠商應於平台上標示「本產品內含射頻模組： XXXyyyLPDzzzz-x (NCC ID) 」字樣。
Realtek Semiconductor Corp.

Headquarters
No. 2, Innovation Road II, Hsinchu Science Park,
Hsinchu, 300, Taiwan, R.O.C.
Tel: 886-3-5780211 Fax: 886-3-5776047
www.realtek.com.tw
11 Rev.1.0

Antenna List
Page No.: 1 of 12

Table for Filed Antenna

Ant. Con. Peak Gain
No. Brand Model No.
Type Type (dBi)
01 LYNwave PIFA IPEX 3.5 ALA110-222050-300010
02 JOYMAX Dipole IPEX 3.0 TWF-614XMPXX-500
TX 1: -0.19
03 ACON PIFA IPEX AWP6P
TX 2: -0.99
TX 1: -0.11 TX 1: CAN4313ZP0648WXA1
04 Yageo PIFA IPEX
TX 2: 0.07 TX 2: CAN4313ZP0648WXA2
TX 1: 1.32 TX 1: 81.EJT15.GVM
05 WNC PIFA IPEX
TX 2: 1.50 TX 2: 81.EJT15.GVN
TX 1: 1.47
06 Foxconn PIFA IPEX WDAN-T1WM
TX 2: 1.38
Main: 2.19
07 Hitachi PIFA IPEX HBY07
Aux.: -0.33
Main: 2.91
Aux.: 2.82
TX 1: 0.27
TX 2: 0.02
TX 1: 1.30
TX 2: 2.42
TX 1: -1.04
TX 2: -1.19
TX 1: -1.74
12 Hitachi PIFA IPEX HFT65
TX 2: 1.16
TX 1: 0.87
13 Hitachi PIFA IPEX HCT01
TX 2: 1.94
TX 1: 0.58
TX 2: 1.12
TX 1: -1.65
TX 2: -0.92
TX 1: -0.43
16 FOXCONN PIFA IPEX WDAN-TQ
TX 2: -0.7
TX 1: 0.54 TX 1: 25.90AAP.011
17 WNC PIFA IPEX
TX 2: 0.58 TX 2: 25.90AAO.011
Main: 0.42
18 WNC PIFA IPEX Aux.: 0.79 81.EJZ
MIMO: 0.14
Main: 0.96
19 WNC PIFA IPEX 81.EJT
Aux.: -0.08
Page No.: 2 of 12

TX 1: 0.12 TX 1: 5002011-1
20 ETHERTRONICS PIFA IPEX
TX 2: -3.87 TX 2: 5002012-1
TX 1: 0.76 TX 1: 5002015-1
TX 2: 0.59 TX 2: 5002016-1
TX 1: -1.76 TX 1: 5010011-1
TX 2: -2.61 TX 2: 5010012-1
TX 1: -0.84 TX 1: 5010015-1
TX 2: -2.07 TX 2: 50100161
TX 1: 0.00
24 ACON PIFA IPEX AMP6P
TX 2: 1.89
Main: -1.08
25 WNC PIFA IPEX 81.EJZ15.G52
Aux.: -0.62
Main: -0.58
26 WNC PIFA IPEX 81.EJT15.GJC
Aux.: -1.26
Main: 0.52
27 WNC PIFA IPEX 81.EJT15.GGW
Aux.: 0.77
Main: -0.78
28 WNC PIFA IPEX 81.EJZ15.G53
Aux.: -2.14
TX 1: -0.7 TX 1: AN-070-G(R)
29 QUANTA PIFA IPEX
TX 2: -1.9 TX 2: AN-070-G(L)
TX 1: -0.3 TX 1: AN-070-G(R)
30 QUANTA PIFA IPEX
TX 2: -1.9 TX 2: AN-070-G(L)
TX 1: -0.4 TX 1: AN-120-F(R)
31 QUANTA PIFA IPEX
TX 2: -0.3 TX 2: AN-120-F(L)
TX 1: -1.8 TX 1: AN-120-F(R)
32 QUANTA PIFA IPEX
TX 2: -4.4 TX 2: AN-120-F(L)
Main: 1.27 Main: IA-100193
33 JEM PIFA IPEX
Aux.: -1.27 Aux.: IA-100194
TX1: -0.10
Tyco
34 PIFA IPEX TX2: -0.92 TBN008
(20-D1130002D)
TX 3: 0.56
TX 1: 1.51
35 Smart Approach PIFA IPEX 03-FR021-026
TX 2: 1.56
TX 1: -0.42
36 Hitachi Cable PIFA IPEX TX 2: 0.59 HBY17
TX 3: 1.24
TX 1: 2.97
TX 2: 0.90
TX 1: 0.30 TX 1: 25.90AAN.011
38 WNC PIFA IPEX
TX 2: 0.94 TX 2: 25.90AAM.011
Page No.: 3 of 12

TX 1: 1.66
TX 2: 1.83
Main: -2.12
40 WHAYU PIFA IPEX MSA-00005A
Aux.: -2.49
41 Toshiba PIFA IPEX -0.80 HFS23
42 Toshiba PIFA IPEX 0.64 HFS40
TX 1: 0.47
TYCO
43 PIFA IPEX TX 2: 0.06 TBN008
(20238740-1)
TX 3: 1.65
TYCO TX 1: 0.47
44 PIFA IPEX TBN008
(2023750-1) TX 2: 0.06
TX 1: -2.60
TYCO
45 PIFA IPEX TX 2: -0.26 TBN008
(2023772-1)
TX 3: -0.91
TX 1: 1.98
46 TYCO PIFA IPEX TX 2: 1.97 TBN007
TX 3: -0.88
TX 1: 0.22
TX 3: 2.20
TX 1: 1.68
TX 3: 0.29
TX 1: 2.37
TX 2: 1.59
TX 1: 2.58 TX 1: WDAN-T1AM1001-DH
50 Foxconn PIFA IPEX
TX 2: 1.39 TX 2: WDAN-T1AM1002-DH
Main: -2.76
51 WNC PIFA IPEX WNC005
Aux.: -3.64
TX 1: 0.47
TYCO
52 PIFA IPEX TX 2: 0.06 TBN008
(20238740-1)
TX 3: 1.65
TX 1: 0.28
53 Toshiba PIFA IPEX TBN004
TX 2: -0.83
Main: -1.10
Aux.: 1.76
Main: 1.18
Aux. 1.75
Main: -1.11
56 Tyco PIFA IPEX TBN003
Aux.: -1.11
Page No.: 4 of 12

MIMO: -0.95
Main: 2.40
Aux.: 1.50
Main: 1.19
Aux.: 0.28
Main: 0.52
Aux.: 1.07
TX 1: 1.0
60 Quanta PIFA IPEX 3ASP8AATP20
TX 2: 0.2
TX 1: -0.5
61 Quanta PIFA IPEX AS-070-F
TX 2: -1.9
Main: 3.45
62 Tyco PIFA IPEX Aux: 2.41 TBN001
MIMO: 1.04
TX 1: 1.79 TX 1: SK81WMPB01+A
63 Well Green PIFA IPEX
TX 2: 0.66 TX 2: SK81WMPB02+A
64 Tyco PIFA IPEX -1.11 TBN005 & TBN006
TX 1: -1.07
65 Well Green PIFA IPEX SKW31WMPB01+A
TX 2: -0.64
WiMAX-1: 1.58
66 FVC PIFA IPEX K05007012102
WiMAX2: 1.75
WiMAX-1: 2.7
WiMAX-2: 2.19
TX 1: -1.84 TX 1: SKM11WMPB03+A
68 Well Green PIFA IPEX
TX 2: -2.93 TX 2: SKM11WMPB02+D
WiMAX-1: 1.84
69 FVC PIFA IPEX N01001218001
WiMAX-2:1.8
TX 1: -1.63
70 Well Green PIFA IPEX SKW24WMPB01
TX 2: -0.99
TX 1: 2.05 TX 1: N01001199001
71 FVC PIFA IPEX TX 2: 1.88 TX 2: N01001199001
TX 3: 3.04 TX 3: N01001182002
TX1: 3.11 TX1: N01001193001
72 FVC PIFA IPEX
TX2: 0.55 TX2: N01001193001
TX1: -0.61 TX1: 25.90AAL.001
73 WNC PIFA IPEX
TX2: 1.91 TX2: 25.90AAK.001
TX1: 1.29 TX1: 25.90AAL.011
74 TE Connectivity PIFA IPEX
TX2: 0.04 TX2: 25.90AAK.011
TX1: -0.01 TX1: 25.90AAN.001
TX2: 0.39 TX2: 25.90AAM.001
Page No.: 5 of 12

TX1: 1.20 TX1: 25.90AAP.001

TX2: 0.65 TX2: 25.90AAO.001
TX1: 0.70
77 Quanta PIFA IPEX 35AX6AATP10
TX2: -1.40
TX1: 1.80
78 Quanta PIFA IPEX 37LX6AATP00
TX2: -0.30
TX1: 0.30
79 Quanta PIFA IPEX 37LX7AATP00
TX2: 1.70
TX1: -0.10
TX2: 2.30
TX1: 2.72 TX1: 81.EJZ15.G94
81 WNC PIFA IPEX
TX2: 2.66 TX2: 81.EJZ15.G95
TX1: 1.33 TX1: 81.EJZ15.G98
82 WNC PIFA IPEX
TX2: 1.95 TX2: 81.EJZ15.G99
TX1: 1.84
83 WNC PIFA IPEX 81.EJZ15.GTP
TX2: 1.64
TX1: 2.36 TX1: 81.EK515.G15
84 WNC PIFA IPEX
TX2: 1.13 TX2: 81.EK515.G16
TX1: 1.15 TX1: DC33000YV20
85 WNC PIFA IPEX
TX2: 0.59 TX2: DC33000YV30
TX1: 0.79 TX1: DC33000YV60
86 WNC PIFA IPEX
TX2: -0.32 TX2: DC33000YV70
TX1: 1.85
87 HONGLIN PIFA IPEX 260-23249
TX2: 1.77
TX1: -2.69 TX1: 6036B0086801
88 Yageo PIFA IPEX
TX2: -1.09 TX2: 6036B0087101
TX1: -1.30 TX1: 6036B0086802 (81.EHC15.G63)
89 WNC PIFA IPEX
TX2: -0.49 TX2: 6036B0087102 (81.EHC15.G64)
TX1: 1.21 TX1: 6036B0088203
90 WNC PIFA IPEX
TX2: -0.07 TX2: 6036B0088303
TX1: 2.34 TX1: 6036B0087303
91 WNC PIFA IPEX
TX2: 1.28 TX2: 6036B0087203
TX1: 0.50 TX1: 6036B0088203
92 WNC PIFA IPEX
TX2: 0.12 TX2: 6036B0088303
TX1: 0.61 TX1: 6036B0088401
93 Yageo PIFA IPEX
TX2: 0.71 TX2: 6036B0088501
TX1: 1.46 TX1: 6036B0088901
94 Yageo PIFA IPEX
TX2: 0.95 TX2: 6036B0089001
TX1: -1.11 TX1: 6036B0091201
95 WNC PIFA IPEX
TX2: -0.95 TX2: 6036B0091401
Page No.: 6 of 12

TX1: 0.80 TX1: 6036B0091202

96 Yageo PIFA IPEX
TX2: 0.25 TX2: 6036B0091402
TX1: -0.23 TX1: 1556465-1
TX2: -0.49 TX2: 1556466-1
TX1: 1.29 TX1: 1556495-1
TX2: 0.04 TX2: 1556496-1
TX1: -0.87 TX1: 1556505-1
TX2: -1.24 TX2: 1556506-1
TX1: 1.96 TX1: AMP8P-700186
100 ACON PIFA IPEX
TX2: 1.91 TX2: AMP8P-700187
TX1: 2.79 TX1: APM8P-700016
101 ACON PIFA IPEX
TX2: 0.74 TX2: APM8P-700017
TX1: 2.66 TX1: APM8P-700018
102 ACON PIFA IPEX
TX2: 2.27 TX2: APM8P-700019
TX1: 1.10 TX1: APP8P-700341
103 ACON PIFA IPEX
TX2: 1.99 TX2: APP8P-700342
TX1: -0.18 TX1: C107-520757-A
104 Wha Yu PIFA IPEX
TX2: 2.58 TX2: C107-520756-A
TX1: 1.17
105 Wellshine PIFA IPEX DQ67KJQUT33
TX2: -0.06
TX1: 1.74 TX1: C435-520023-A
TX2: 1.41 TX2: C435-520024-A
TX1: 1.92 TX1: C680-520278-A
TX2: -1.03 TX2: C680-520277-A
TX1: 1.09
108 Wha Yu PIFA IPEX C680-520279-A
TX2: -0.55
TX1: 0.59 TX1: CAN4313LC0613WLA3
109 Yageo PIFA IPEX
TX2: 0.90 TX2: CAN4313LC0613WLA4
TX1: 0.97 TX1: CAN4313LC0630WLA3
110 Yageo PIFA IPEX
TX2: 0.59 TX2: CAN4313LC0630WLA4
TX1: 2.32 TX1: CAN4313WICO03241
111 Yageo PIFA IPEX
TX2: 1.85 TX2: CAN4313WICO03242
TX1: 0.23 TX1: CAN43130WIFO04921
112 Yageo PIFA IPEX
TX2: 1.53 TX2: CAN43130WIFO04922
TX1: 0.18 TX1: 81.EKG15.G38
113 WNC PIFA IPEX
TX2: 0.60 TX2: 81.EKG15.G37
TX1: 0.54 TX1: 81.EKG15.G41
114 WNC PIFA IPEX
TX2: -0.03 TX2: 81.EKY15.G42
TX1: 1.89 TX1: PANT11A00008-1
115 Jess-Link PIFA IPEX
TX2: 1.56 TX2: PANT11A00009-1
Page No.: 7 of 12

TX1: 1.84 TX1: PANT11A00026-1

116 Jess-Link PIFA IPEX
TX2: 1.98 TX2: PANT11A00027-1
TX1: -0.70
117 ACON PIFA IPEX DQ60APM6P02
TX2: -0.29
TX1: -0.60
118 ACON PIFA IPEX DQ60APM6P03
TX2: -1.02
Well Shine TX1: 1.66 TX1: DQ67KJQUT35
119 PIFA IPEX
(QUA) TX2: 0.05 TX2: DQ67KJQUT36
TX1: -1.41
120 Amphenol PIFA IPEX FL5202-11-001-C
TX2: -0.77
121 MAG. LAYERS PIFA IPEX 1.77 FPA-2423-25GC1-A1
TX1: 0.76 TX1: FX5170-15-004-C
122 Amphenol PIFA IPEX
TX2: -2.11 TX2: FX5170-15-001-C
TX1: 0.55 TX1: IV5218-11-002-C
TX2: 0.31 TX2: IV5218-11-001-C
TX1: 0.54 TX1: IV5233-15-003-C
TX2: -0.53 TX2: IV5233-15-002-C
TX1: 2.85
TX2: 1.29
TX1: 2.81 TX1: N01001205001
126 FAVORTRON PIFA IPEX
TX2: 1.97 TX2: N01001206001
127 MAG. LAYERS PIFA IPEX 2.17 PCA-2111-25GC1-A1
TX1: 2.43
128 Wha Yu PIFA IPEX PSAM-002
TX2: -0.41
TX1: 1.6
129 Quanta PIFA IPEX R12_AN-090-A/B
TX2: 0.3
TX1: 0.8
TX2: 0.4
TX1: 1.5
TX2: 0.5
TX1: 1.70
132 Smart Approach PIFA IPEX SE-ECFKA-001
TX2: 1.53
TX1: 2.53 TX1: SE-ECLA1-001
133 Smart Approach PIFA IPEX
TX2: 2.92 TX2: SE-ECLA1-002
Tyco TX1: -2.60
134 PIFA IPEX TBN008
(2023770-1) TX2: -0.26
Tyco TX1: -2.60
135 PIFA IPEX TBN008
(2023772-1) TX2: -0.26
TX1: -0.99 TX1: WDAN-HMCH1401-DH
Page No.: 8 of 12


TX2: 0.38 TX2: WDAN-HMCH1502-DH
TX1: -1.85
138 Foxconn PIFA IPEX WDAN-HMEDW005-DH
TX2: 1.33
TX1: -0.38 TX1: 25.90A2G.021
139 Tyco PIFA IPEX
TX2: 1.04 TX2: 25.90A2H.021
TX1: 1.23 TX1: 25.90A2G.001
140 WNC PIFA IPEX
TX2: 0.29 TX2: 25.90A2H.001
TX1: 0.48 TX1: 25.90A2G.011
141 Yageo PIFA IPEX
TX2: -1.37 TX2: 25.90A2H.011
TX1: 0.40 TX1: QADCGC5_WL_M
142 Quanta PIFA IPEX
TX2: -1.00 TX2: QADCGC5_WL_A
TX1: 0.10 TX1: DQ6GC200100
TX2: -0.40 TX2: DQ6GC200200
TX1: -1.30 TX1: DQ6GC300100
TX2: 0.70 TX2: DQ6GC300200
TX1: 0.7 TX1: QADCGC6_WL_M
TX2: 1.2 TX2: QADCGC6_WL_A
TX1: 1.84 TX1: APP8P-700188
146 ACON PIFA IPEX
TX2: 0.07 TX2: APP8P-700187
TX1: 1.84 TX1: APP8P-700186
147 ACON PIFA IPEX
TX2: 0.07 TX2: APP8P-700185
TX1: 1.96 TX1: C435-520044-A
TX2: 1.97 TX2: C435-520043-A
TX1: 1.91 TX1: C435-520042-A
TX2: 1.88 TX2: C435-520045-A
TX1: -0.96 TX1: APM6P-700033
150 ACON PIFA IPEX
TX2: -0.86 TX2: APM6P-700034
TX1: -1.85 TX1: 14G152168231LV
TX2: -1.60 TX2: 14G152168131LV
TX1: -1.32 TX1: APM6P-700027
152 ACON PIFA IPEX
TX2: -0.23 TX2: APM6P-700029
TX1: -2.39 TX1: 2023940-1
153 Tyco PIFA IPEX
TX2: 1.52 TX2: 2023944-1
TX1: -1.16 TX1: APM6P-700028
154 ACON PIFA IPEX
TX2: -0.74 TX2: APM6P-700030
TX1: -0.58 TX1: 2023946-1
155 Tyco PIFA IPEX
TX2: -0.11 TX2: 2023950-1
TX1: 1.61 TX1: LX-0980-11-000-R
TX2: 1.57 TX2: LX-0983-11-000-R
Page No.: 9 of 12

TX1: 1.35 TX1: 3172525

157 NISSEI PIFA IPEX
TX2: 1.99 TX2: 3172566
TX1: -0.39 TX1: 25.90675.001
158 ACON PIFA IPEX
TX2: 0.64 TX2: 25.90676.001
TX1: -1.53 TX1: 25.90669.001
159 WNC PIFA IPEX
TX2: 1.32 TX2: 25.90670.001
TX1: 1.94 TX1: 25.90A1E.001
160 WNC PIFA IPEX
TX2: -0.85 TX2: 25.90A1F.001
TX1: 1.89 TX1: 25.90A1E.001
161 WNC PIFA IPEX
TX2: -0.90 TX2: 25.90A1F.001
TX1: 1.94 TX1: 25.90A1E.011
162 Yageo PIFA IPEX
TX2: 1.78 TX2: 25.90A1F.011
TX1: 0.51 TX1: 25.91370.021
163 WNC PIFA IPEX
TX2: 1.73 TX2: 25.91371.021
TX1: 1.06 TX1: 25.91370.011
164 Yageo PIFA IPEX
TX2: 0.16 TX2: 25.91371.011
TX1: 0.06 TX1: 25.90A4C.021
165 Tyco PIFA IPEX
TX2: 0.18 TX2: 25.90A4D.021
TX1: 1.52 TX1: 25.90A4C.001
166 WNC PIFA IPEX
TX2: -0.60 TX2: 25.90A4D.001
TX1: 0.93 TX1: 25.90A4C.011
167 Yageo PIFA IPEX
TX2: -0.17 TX2: 25.90A4D.011
TX1: 1.88 TX1: 3209970
TX2: 1.26 TX2: 3210002
TX1: -0.04 TX1: 25.90929.001
169 ACON PIFA IPEX
TX2: 1.16 TX2: 25.90930.001
TX1: 0.60 TX1: 25.90934.001
170 Ethertronics PIFA IPEX
TX2: -0.59 TX2: 25.90935.001
TX1: 0.87 TX1: 25.90919.001
171 WNC PIFA IPEX
TX2: -0.93 TX2: 25.90920.001
TX1: 0.60 TX1: 25.90934.001
172 WNC PIFA IPEX
TX2: -0.59 TX2: 25.90935.001
TX1: 0.10 TX1: QADC FL8_WL_M
TX2: -0.30 TX2: QADC FL8_WL_A
TX1: -0.1 TX1: QADCFL3_WL_M
TX2: -0.1 TX2: QADCFL3_WL_A
TX1: 1.47 TX1: LX0970-11-000-R
TX2: 1.68 TX2: LX0968-11-000-R
TX1: -0.40 TX1: WDAN-L1ML3001-DF
176 FOXCONN PIFA IPEX
TX2: 1.10 TX2: WDAN-L1ML3002-DF
Page No.: 10 of 12

TX1: 0.54 TX1: 3172467

TX2: 1.80 TX2: 3172509
TX1: 1.17 TX1: 25.90598.001
178 ACON PIFA IPEX
TX2: 1.04 TX2: 25.90597.001
TX1: 1.94 TX1: 25.90587.001
179 WNC PIFA IPEX
TX2: 0.59 TX2: 25.90586.001
TX1: -1.21 TX1: 25.90700.001
180 WNC PIFA IPEX
TX2: 1.27 TX2: 25.90702.001
TX1: 1.37 TX1: 25.90800.001
181 ACON PIFA IPEX
TX2: 1.21 TX2: 25.90802.001
TX1: 0.07 TX1: 25.90A4W.001
182 Yageo PIFA IPEX
TX2: -0.06 TX2: 25.90A4V.001
TX1: 1.98 TX1: 25.90A4W.011
183 FOXLINK PIFA IPEX
TX2: 1.97 TX2: 25.90A4V.011
TX1: -0.37 TX1: C-1334-11-000-26
TX2: -2.64 TX2: C-1335-11-000-26
TX1: 0.77 TX1: 25.90979.001
185 WNC PIFA IPEX
TX2: 0.74 TX2: 25.90980.001
TX1: 0.35 TX1: C-1952-11-000-26
TX2: -1.20 TX2: C-1953-11-000-26
TX1: -1.31 TX1: C-2238-11-000-26
TX2: -3.09 TX2: C-2239-11-000-26
TX1: 1.14 TX1: WDAN-LFNZ3001-DH
TX2: 0.61 TX2: WDAN-LFNZ3002-DH
TX1: 0.35 TX1: C-3033-11-000-26
TX2: -1.20 TX2: C-3034-11-000-26
TX1: -1.31 TX1: C-3068-11-000-26
TX2: -3.09 TX2: C-3069-11-000-26
TX1: -0.11 TX1: WDAN-L1NZ4003-DH
TX2: 0.35 TX2: WDAN-L1NZ4004-DH
TX1: -0.11 TX1: WDAN-L1NZ4001-DH
TX2: 0.35 TX2: WDAN-L1NZ4002-DH
TX1: 0.64 TX1: 1556219-1
193 Tyco PIFA IPEX
TX2: -0.92 TX2: 1556220-1
TX1: 2.00 TX1: APP8P-700191
194 ACON PIFA IPEX
TX2: 0.13 TX2: APP8P-700192
TX1: 2.00 TX1: APP8P-700189
195 ACON PIFA IPEX
TX2: 0.13 TX2: APP8P-700190
TX1: 0.64 TX1: 1556216-1
196 Tyco PIFA IPEX
TX2: -0.92 TX2: 1556215-1
Page No.: 11 of 12

TX1: -0.42 TX1: 25.90653.001

197 ACON PIFA IPEX
TX2: -0.13 TX2: 25.90654.001
TX1: -0.52 TX1: 25.90649.001
198 WNC PIFA IPEX
TX2: 0.31 TX2: 25.90650.001
TX1: -0.10 TX1: QADC PS3_WL_M
TX2: 0.00 TX2: QADC PS3_WL_A
TX1: 1.16 TX1: 024-01F0-2242
TX2: -0.88 TX2: 024-01F0-2243
TX1: -0.83 TX1: 3176658
TX2: -0.61 TX2: 3176674
TX1: -1.54 TX1: C-2381-11-000-26
TX2: -2.93 TX2: C-2382-11-000-26
TX1: 0.87 TX1: WDAN-LWSN3001-DH
TX2: 0.49 TX2: WDAN-LWSN3002-DH
TX1: 1.71 TX1: WDAN-L1WK1001-DF
TX2: 1.43 TX2: WDAN-L1WK1002-DF
TX1: 1.82 TX1: HMT14-MAIN
205 Hitachi PIFA IPEX
TX2: 1.54 TX2: HMT14-AUX
TX1: -1.21 TX1: 25.90700.001
206 ACON PIFA IPEX
TX2: 1.27 TX2: 25.90702.001
TX1: 1.37 TX1: 25.90800.001
207 ACON PIFA IPEX
TX2: 1.21 TX2: 25.90802.001
TX1: -0.5 TX1: QADCPS1_WL_M
TX2: -1.4 TX2: QADCPS1_WL_A
TX1: 0.30 TX1: 81.EK515.G13
209 WNC PIFA IPEX
TX2: 0.39 TX2: 81.EK515.G14
TX1: 2.01
210 ZTX PIFA IPEX ZTX-A162-Q18000-00
TX2: 1.69
Page No.: 12 of 12

RTL8723AS: User 'S Manual

Uploaded by

Copyright:

Available Formats

RTL8723AS: User 'S Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

RTL8723AS: User 'S Manual

Uploaded by

Copyright:

Available Formats

RTL8723AS

Realtek Semiconductor Corp.

USING THIS DOCUMENT

 Complete 802.11n solution for 2.4GHz band

 Compatible with 802.11n specification

 Backward compatible with 802.11b/g devices while operating in 802.11n mode

 Qualified Bluetooth v2.1+EDR and v3.0+HS Systems

 Support for v4.0 Bluetooth Low Energy

 Integrated class1, class2, and class3 PA and modem in Bluetooth Controller

 IEEE 802.11b/g/n compatible WLAN

 IEEE 802.11e QoS Enhancement (WMM)

 IEEE 802.11h TPC, Spectrum Measurement

 Cisco Compatible Extensions (CCX) for WLAN devices

 SDIO for WLAN / UART for BT

 Multi-function USB for WLAN and BT

 Frame aggregation for increased MAC efficiency (A-MSDU, A-MPDU)

 Low latency immediate High-Throughput Block Acknowledgement (HT-BA)

 PHY-level spoofing to enhance legacy compatibility

 Power saving mechanism

 Channel management and co-existence

 IEEE 802.11n OFDM

 One Transmit and one Receive path (1T1R)

 20MHz and 40MHz bandwidth transmission

 Short Guard Interval (400ns)

 Maximum data rate 54Mbps in 802.11g and 150Mbps in 802.11n

 Switch diversity for DSSS/CCK

 Hardware antenna diversity

 Selectable receiver FIR filters

 Fast receiver Automatic Gain Control (AGC)

 On-chip ADC and DAC

 Integrated MCU to execute Bluetooth protocol stack

 Support 3 SCO links simultaneously

 Enhanced BT/WIFI Coexistence Control to improve transmission quality in different profiles

 Bluetooth Low Energy Dual Mode support

 Fast AGC control to improve receiving dynamic range

 Support AFH to dynamically detect channel quality to improve transmission quality

 Integrated internal class1, class2, and class3 PA

 Bluetooth 3.0 compliant

 Bluetooth Low Energy supported

 Integrated 32K oscillator

 General Purpose Input/Output (11 pins)

 Three configurable LED pins

 Configurable Bluetooth Coexistence Interface

1.3. Functional Specifications

- Reorient or relocate the receiving antenna.

End Product Labeling

Manual Information To the End User

4.5.2 Industry Canada Statement

End Product Labeling

Manual Information To The End User

Realtek Semiconductor Corp.

Page No.: 1 of 12

Table for Filed Antenna

TX1: 1.20 TX1: 25.90AAP.001

TX1: 0.80 TX1: 6036B0091202

TX1: 1.84 TX1: PANT11A00026-1

TX1: -0.35 TX1: WDAN-HMCH1501-DH

TX1: 1.35 TX1: 3172525

TX1: 0.54 TX1: 3172467