PassLeader 200-355 Exam Dumps (1-40)

Free VCE and PDF Exam Dumps from PassLeader
 Vendor: Cisco
 Exam Code: 200-355
 Exam Name: CCDA -- Implementing Cisco Wireless Network Fundamentals
 Question 1 -- Question 40
Visit PassLeader and Download Full Version 200-355 Exam Dumps
QUESTION 1
When deploying a Cisco Cloud Wireless Infrastructure, what two destination ports must be open?
(Choose two.)
A. TCP/5246
B. UDP/5246
C. TCP/5247
D. UDP/5247
E. TCP/7351
F. UDP/7351
G. TCP/7734
H. UDP/7734
Answer: FG
QUESTION 2
A customer has ordered a Cisco 5760 Wireless Controller.
What speed and quantity of ports are needed for full-speed operation?
A. 6 x 1 Gb
B. 6 x 10 Gb
C. 2 x 10 Gb
D. 2 x 1 Gb
E. 8 x 1 Gb
F. 8 x 10 Gb
Answer: B
QUESTION 3
Refer to the exhibit. A network administrator is attempting to connect to the GUI of a WLC with
interfaces as shown. Which IP address should the network administrator use?
200-355 Exam Dumps 200-355 Exam Questions 200-355 PDF Dumps 200-355 VCE Dumps
http://www.passleader.com/200-355.html
A. 192.168.0.2
B. 192.168.1.2
C. 192.168.2.2
D. 192.168.3.2
E. 192.168.4.2
Answer: B
QUESTION 4
A network engineer is connected via wireless to a Cisco AireOS WLC and wants to download the
configuration but is unable to do so. Which change will correct the issue?
A. enable management via wireless

B. connect via wired network
C. enable Telnet
D. enable WebAuth SecureWeb
E. connect on 5-GHz SSID
Answer: B
QUESTION 5
A customer has asked for its wireless equipment to be managed as securely as possible. Which
three management protocols will provide encrypted access to the equipment? (Choose three.)
A. Secure Shell
B. HTTPS
C. SNMPv3
D. Telnet
E. SNMPv2c
F. HTTP
Answer: ABC
QUESTION 6
An engineer is trying to convert the IP Address of the wireless controller to amend DHCP Option
43 configuration on the DHCP server. What mathematical format must the IP address of the
Wireless controller be converted to in order to function correctly?
A. Hexadecimal
B. Binary
C. Decimal
D. ASCII
Answer: A
QUESTION 7
Refer to the exhibit. WLC1 becomes unresponsive due to a power failure at a customer site. How
does the access point that is shown in the WLC controller GUI behave now that WLC1 is disabled?
A. associates to controller 10.201.204.6

B. associates to controller 10.201.204.11
C. associates to controller 10.201.204.8
D. associates to controller 10.201.204.19
Answer: B
QUESTION 8
A customer wants to deploy a mesh network with 2 root access points and 10 mesh access points.
The root access points should be configured as which mode on the WLC?
A. mesh
B. FlexConnect
C. bridge
D. rouge detection
E. sniffer
Answer: C
QUESTION 9
A customer has completed the installation of an 802.11ac greenfield deployment at their corporate
headquarters. They would like to leverage 802.11ac enhanced speeds on the trusted employee
WLAN. In order to configure the employee WLAN, what Layer 2 security policies are valid?
A. WPA2 (TKIP)
B. WPA(AES)
C. OPEN
D. WEP
Answer: C
QUESTION 10
Refer to the exhibit. A customer is using central web authentication with a Cisco 5508 Wireless
Controller and Cisco Identity Services Engine. An error occurs when wireless clients are redirected
to the hosted splash page. What is causing the client error?
A. Secure Web Mode is disabled on the WLC.

B. OCSP is disabled on the WLC.
C. Management Via Dynamic Interface is disabled on the WLC.
D. Ethernet Multicast Forwarding is enabled on the WLC.
Answer: A
QUESTION 11
A customer cannot access the GUI on the Cisco 5508 Wireless Controller from the management
interface due to network failure. Which interface can the customer use to access the WLC GUI until
the network issues are resolved?
A. virtual
B. dynamic
C. console port
D. service port
Answer: D
QUESTION 12
Which interface is used to connect the foreign and anchor controllers?
A. management
B. service
C. virtual
D. dynamic
Answer: A
QUESTION 13
Refer to the exhibit. An engineer is configuring a SSID to utilize the management interface on the
WLC. The management interface is configured with an untagged VLAN in the wireless controller
interface settings. The controller is connected to a neighboring switch via the interface shown in
the diagram.
Which VLAN will traffic coming from the newly created SSID use to traverse the wired network?
A. 1
B. 20
C. 44
D. 50
Answer: C
QUESTION 14
A customer has a corporate SSID that is configured to authenticate against an ACS server to
validate client credentials on the corporate SSID. The customer has a firewall logically positioned
on the network between the WLC and the ACS server in the network architecture. Which port must
the firewall allow to ensure that authentication can occur?
A. 43
B. 1812
C. 5146
D. 8143
Answer: B
QUESTION 15
During an upgrade, the wireless infrastructure has seen a few access points join and then drop off
the network. After further investigation, it appears the access points may have an IOS code version
that is causing issues. Where in the controller is this information found?
A. GUI > Wireless > Access Point > General

B. CLI > show ap image all
C. GUI > Monitor > Software Version
D. CLI > show sysinfo
Answer: A
QUESTION 16
Microsoft Active Directory integrated machines are not authenticating to the internal WLAN.
The WLAN settings are WPA2-AES-802.1x and are authenticating to a Cisco Identity Services
Engine server. You investigate and note that non-domain authenticated machines are properly
authenticating to the WLAN using their Active Directory credentials.
Why would this problem occur?
A. The WLAN is configured improperly in group policy.

B. The ACS server is not joined to the domain, causing authentications to fail.
C. The domain machines are configured to disable the wireless adapter.
D. The non-domain machines are using local accounts that are not authenticated through the domain.
Answer: A
QUESTION 17
Mac OS X machines are having issues accessing the wireless network. While working with TAC,
the administrator is asked to find the Mac laptop's wireless adapter model and driver.
Where should the administrator look to find this information?
A. About This Mac > System Report

B. Control Panel > System
C. System Preferences > Network > Wi-Fi Adapter > Advanced
D. Control Panel > Networking > Adapters > Properties
Answer: A
QUESTION 18
An engineer is trying to determine from the controller CLI whether or not Telnet is enabled on the
wireless controller. Which command can be entered to display this information?
A. show network summary

B. show aaa auth
C. show radius summary
D. show ldap statistics
Answer: A
QUESTION 19
Refer to the exhibit. A customer is determining whether a Windows 7 laptop is operating on the
correct IEEE 802.11 standard. Which standard is being used by the laptop in the exhibit?
A. 802.11b
B. 802.11g
C. 802.11n
D. 802.11p
Answer: C
QUESTION 20
An engineer is trying to identify if radar has impacted the wireless network at a customer site. When
using the controller GUI, which dashboard in the Monitor section presents this information?
A. 802.11a/n - Air Quality Reports

B. Clean Air - Worst Air Quality Report
C. 802.11b/g/n - Interfering Devices
D. Statistics - Mobility Statistics
Answer: A
QUESTION 21
An engineer is using a predictive survey tool to estimate placement of APs in a carpeted office
space. Most interior walls should be assigned which attenuation value?
A. 2 dB
B. 3 dB
C. 4 dB
D. 5 dB
Answer: B
QUESTION 22
An engineer is conducting an active survey for indoor coverage in a warehouse. The warehouse
has long aisles with racks that extend to the ceiling. Which antenna type has a radiation pattern
that is suited to provide coverage in each aisle?
A. Yagi
B. patch
C. omnidirectional
D. dipole
Answer: B
QUESTION 23
Following the deployment of a wireless network for data and voice services, an engineer is to
validate the coverage. Which type of survey is required to ensure coverage?
A. passive
B. active
C. fingerprinting
D. calibrating
Answer: A
QUESTION 24
During the deployment of a wireless network for data and location services, an engineer is to fine-
tune the location services. What is this type of survey called?
A. passive fingerprinting
B. passive calibrating
C. active fingerprinting
D. active calibrating
Answer: A
QUESTION 25
Refer to the exhibit. In an effort to identify RF characteristics at a customer location, an RF engineer
uses the Spectrum Analyzer tool that is shown.
Which feature that is native to the Spectrum Analyzer is identified by the exhibit?
A. Real-Time FFT
B. Duty Cycle
C. Max Hold
D. Time Domain
Answer: A
QUESTION 26
Refer to the exhibit. The site in this AirMagnet Survey heat map is ready for which level of service?
A. data
B. voice
C. location
D. RFID
Answer: A
QUESTION 27
Which two services require an RToWLAN design? (Choose two.)
A. WVoIP
B. video conferencing
C. multicast video
D. Telnet
E. SSH
Answer: AB
QUESTION 28
In the current RF environment, the noise floor is -95 dBm. A tablet needs an SNR of 25 dB to
transmit at the required speed. What must the RSSI cell edge be to meet the required SNR?
A. -120 dBm
B. -90 dBm
C. -70 dBm
D. -60 dBm
E. -50 dBm
Answer: C
QUESTION 29
An access point is currently transmitting at 4 mW. The customer needs to increase its signal
strength by 6 dB to create a larger wireless cell. What should the new transmit power be?
A. 8 mW
B. 10 mW
C. 12 mW
D. 16 mW
E. 24 mW
Answer: D
QUESTION 30
A wireless engineer is designing the wireless networking for a company with offices in two different
locations. Which two regulatory bodies should they check to find the maximum EIRP allowed?
(Choose two.)
A. IEEE
B. FCC
C. ITU-R
D. ETSI
E. Wi-Fi Alliance
Answer: BD
QUESTION 31
After installing a Cisco 5508 Wireless Controller using the default settings, how often will the RRM
update occur?
A. 30 seconds
B. 60 seconds
C. 300 seconds
D. 600 seconds
E. 3600 seconds
F. 7200 seconds
Answer: D
QUESTION 32
A customer has requested a single point of policy enforcement for LAN and WLAN. Which
deployment model should be used?
A. converged
B. autonomous
C. FlexConnect
D. centralized
Answer: A
QUESTION 33
Which CLI command is used on a Cisco WLC to troubleshoot mobility, rogue detection, and load-
balancing events?
A. debug dot11
B. debug capwap all
C. show dot11 details
D. show capwap details
Answer: A
QUESTION 34
Which three WLC debug commands are appropriate to troubleshoot a wireless client that is
associated to an AP? (Choose three.)
A. debug capwap
B. debug mac addr
C. debug dot11
D. debug dhcp
E. debug ap
F. debug dtls
Answer: BCD
QUESTION 35
An engineer wants to have users who connect to a WLAN be redirected to a terms-of-service page
with the company logo and a login. What should be configured on the WLAN to enable this
capability?
A. Layer 2 IEEE 802.1x

B. Web Policy Slash Page Web Redirect
C. Web Policy Authentication
D. AAA Servers
E. Web Policy Passthrough
Answer: C
QUESTION 36
Which two principles must be considered when deploying a wireless network through a wooded
area? (Choose two.)
A. absorption
B. reflection
C. diffraction
D. scattering
E. refraction
Answer: AD
QUESTION 37
What is an interferer that an engineer may see in Cisco CleanAir?
A. microwave ovens
B. rogue APs
C. malicious clients
D. co-channel interference
Answer: A
QUESTION 38
A network engineer notices that two mesh APs are having problems communicating. After
reviewing the current radio configurations, it is noted that one AP is transmitting at 3 mW while the
other is transmitting at 60 mW. How many decibels would the 3-mW AP need its power increased
to match the 60-mW AP?
A. 8
B. 12
C. 13
D. 20
E. 57
Answer: C
QUESTION 39
A network engineer requires an antenna for a point-to-point bridge with at least 20 dBi of gain.
Which antenna is appropriate for the task?
A. Yagi
B. patch
C. parabolic dish
D. dipole
E. internal omnidirectional
Answer: C
QUESTION 40
An engineer needs to find out the maximum EIRP allowed for their office in Asia. What regulatory
body should be contacted?
A. CRTC
B. ETSI
C. IEEE
D. NTT
Answer: D
Visit PassLeader and Download Full Version 200-355 Exam Dumps

PassLeader 200-355 Exam Dumps (1-40)

Uploaded by

Copyright:

Available Formats

PassLeader 200-355 Exam Dumps (1-40)

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PassLeader 200-355 Exam Dumps (1-40)

Uploaded by

Copyright:

Available Formats

Free VCE and PDF Exam Dumps from PassLeader

 Exam Code: 200-355

 Exam Name: CCDA -- Implementing Cisco Wireless Network Fundamentals

Visit PassLeader and Download Full Version 200-355 Exam Dumps

A. enable management via wireless

A. associates to controller 10.201.204.6

A. Secure Web Mode is disabled on the WLC.

A. GUI > Wireless > Access Point > General

A. The WLAN is configured improperly in group policy.

A. About This Mac > System Report

A. show network summary

A. 802.11a/n - Air Quality Reports

A. Layer 2 IEEE 802.1x

Visit PassLeader and Download Full Version 200-355 Exam Dumps

You might also like