Scribd
Upload
87 views

Display 7 Segmentos Arduino

This document contains an Arduino program that uses LEDs to display the numbers 0-9. The program includes code to set the LED pins as outputs in setup() and code in loop() to turn on the correct LEDs to display each number for 1 second before turning them off and moving to the next number. It uses 6 LEDs (pins 2-7) to represent the segments needed to display each digit.

Uploaded by

Diana L. Cortés
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
87 views

Display 7 Segmentos Arduino

This document contains an Arduino program that uses LEDs to display the numbers 0-9. The program includes code to set the LED pins as outputs in setup() and code in loop() to turn on the correct LEDs to display each number for 1 second before turning them off and moving to the next number. It uses 6 LEDs (pins 2-7) to represent the segments needed to display each digit.

Uploaded by

Diana L. Cortés
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

NOMBR FECHA:

E
CLEI:

Sede central Carrera 5 N° 8-37 piso 2, Centro


Teléfonos: (8) 871 1480 – 871 9836
Correo: [email protected]
Neiva, Huila, Colombia
PROGRAMACIÓN

int led = 13; //numero dos


int led1 = 12; digitalWrite(led4, HIGH);
int led2 = 11; digitalWrite(led6, HIGH);
int led3 = 10; delay(1000);
int led4 = 9; digitalWrite(led4, LOW);
int led5 = 8; digitalWrite(led6, LOW);
int led6 = 7; //numero tres
digitalWrite(led3, HIGH);
digitalWrite(led6, HIGH);
void setup() { digitalWrite(led5, HIGH);
delay(1000);
pinMode(led, OUTPUT); digitalWrite(led3, LOW);
pinMode(led1, OUTPUT); digitalWrite(led6, LOW);
pinMode(led2, OUTPUT); digitalWrite(led5, LOW);
pinMode(led3, OUTPUT); //numero cuatro
pinMode(led4, OUTPUT); digitalWrite(led, HIGH);
pinMode(led5, OUTPUT); digitalWrite(led6, HIGH);
pinMode(led6, OUTPUT); delay(1000);
digitalWrite(led, LOW);
digitalWrite(led6, LOW);
}
//numero cinco
digitalWrite(led, HIGH);
delay(1000);
void loop() {
digitalWrite(led, LOW);
//numero seis
digitalWrite(led2, HIGH); digitalWrite(led4, HIGH);
delay(1000); digitalWrite(led5, HIGH);
digitalWrite(led2, LOW); digitalWrite(led6, HIGH);
//numero cero digitalWrite(led2, HIGH);
digitalWrite(led2, HIGH); delay(1000);
digitalWrite(led3, HIGH); digitalWrite(led4, LOW);
digitalWrite(led4, HIGH); digitalWrite(led5, LOW);
digitalWrite(led5, HIGH); digitalWrite(led6, LOW);
digitalWrite(led6, HIGH); digitalWrite(led2, LOW); //numero siete
delay(1000); delay(1000); //numero ocho
digitalWrite(led2, LOW); digitalWrite(led5, HIGH);
digitalWrite(led3, LOW); digitalWrite(led6, HIGH);
digitalWrite(led4, LOW); delay(1000);
digitalWrite(led5, LOW); digitalWrite(led5, LOW);
digitalWrite(led6, LOW); digitalWrite(led6, LOW);
//numero uno //numero nueve
digitalWrite(led1, HIGH); }
digitalWrite(led4, HIGH);
delay(1000);
digitalWrite(led1, LOW);
digitalWrite(led4, LOW);

Sede central Carrera 5 N° 8-37 piso 2, Centro


Teléfonos: (8) 871 1480 – 871 9836
Correo: [email protected]
Neiva, Huila, Colombia

You might also like