Occupancy Sensor OSC20–UOW

OSC10–UOW
Ultrasonic Ceiling Sensor OSC05–UOW

Microprocessor based, the OSCxx-U

has a self adapting feature that compensates
for air flow, giving it excellent immunity to
air currents and other interference.
THE OSCxx-U OCCUPANCY SENSOR
• ULTRASONIC SENSING TECHNOLOGY (US)
• EXCELLENT RANGE AND SENSITIVITY
• SIMPLE, FAST INSTALLATION
• SELF-ADJUSTING
• DIGITAL TECHNOLOGY, COMPLETE RELIABILITY
• PHOTOCELL CONTROL

GENERAL OPERATION
The OSCxx-U is a low voltage occupancy sensor that controls
indoor lighting. The sensor fills the room with continuous high
frequency (ultrasonic) sound waves. Any movement within the FEATURES
sensor’s range causes a shift in the original emitted frequency.
The sensor’s receiver identifies any change in frequency as Small Size: Installed sensor appears almost invisible.
motion and either turns the lights on or maintains lights on. Fast, Simple Installation: Easy ceiling mount, three wire connection
(low voltage) and twist-lock sensor attachment.
AUTOMATICALLY ADAPTS Maximum Reliability, Low Cost: All digital circuitry uses a minimum
of components.
Interference Symptoms OSCxx-U Action Designed for “install Small Motion Sensitivity: The ultrasonic technology provides
Auto adjust and forget” use, the
excellent small motion sensitivity.

OSCxx-–UOW
Lights on US threshold
frequently OSCxx-U automatically
Air Flow Low pass filter
analyzes room Timer Setting: Automatic - and Manual 30 sec. to 30 min.
Lights Auto sets conditions and adapts Test mode - 6 sec.
cycle timer to
Timer Left In Test Mode on/off operating mode
. to errors or changing Non-Volatile Memory: Learned and adjusted settings saved in
environment. protected memory are not lost during power outages.
Auto adjust
False-ons time-out Wide Coverage: Units from 500 to 2000 sq. ft. available.
Ambient Light Recognition: The photocell prevents lights from
Auto adjust
US Sensitivity
False-offs time-out turning on when the room is adequately lit by natural light.

Lights on Auto adjust

too long Time Delay
Time-out Too Long

HOW THE OSCXX-U AUTOMATICALLY ADAPTS

A dedicated internal microprocessor continually
C ondi t i on E x a m p le Adaptive Reaction analyzes the room environment and adjusts
Timer Left In Test Mode - The An installer accidentally leaves The sensor automatically resets the timer itself automatically. The internal timer and
sensor remains in an 6 sec. the sensor in the 6 sec. timer to 10 min after
. 15 .min of test mode. ultrasonic sensitivity are automatically adjusted.
test mode. test mode and the lights may go
off or on every 6 sec. Once installed, the OSCxx-U does not require
manual adjustment or calibration.
False-On -The sensor The sensor detects movement After an initial movement is sensed,
incorrectly turns the lights on. in the corridor or hallway and if another movement is not sensed within
the room lights turn on. the timer setting then the delayed off time
setting is automatically reduced.
False-Off -The sensor The sensor does not detect If motion is sensed within a short period after
incorrectly turns the lights off. movement because an the lights go off, then the current delayed
occupant sits virtually off-time setting is increased.
motionless at a desk and the
lights turn off.

SPECIFICATION SUBMITTAL
JOB NAME: CATALOG NUMBERS:

JOB NUMBER:

Leviton Mfg. Co., Inc.

59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
Visit our Website at: www.leviton.com 1
 Product
Specifications OSCxx–UOW
.........................
PRODUCT SPECIFICATIONS

Models
Part Number Transducer Pairs Coverage Operating Frequency Additional Features
OSC05-U One 500 sq. ft. 40kHz Photocell
OSC10-U Two 1000 sq. ft. 40kHz Photocell
OSC20-U Two 2000 sq. ft. 32kHz Photocell
CONTROLS DIP switch settings
US (Ultrasonic Sensitivity): High to low range. Switch Switch Functions Switch Settings
Self Adjusting Timer: Timer is factory set at Bank A OFF ON
10 minutes. User can easily select 30s - 30min A1 N/A — —
using internal controls. Sensor may increase timer A2 N/A — —
automatically through self-adapting features to A3 Manual Mode Auto Adapting Enabled Auto Adapting Disabled
meet room or occupancy patterns. A4 Walk-Thru Disable Walk-Thru Enabled Walk-Thru Disabled
PC (Photocell Adjustment): 20 to 3,000 Lux Bank B
B1 Override to On Auto Mode Lights forced On
INDICATOR B2 Override to Off Auto Mode Lights forced Off
Green LED Lamp: Ultrasonic motion. B3 Test Mode OFF ON OFF Enter/Exit Test Mode
B4 LED Disable LEDS Enabled LEDS Disabled
SPECIFICATIONS
Construction: One or two ultrasonic transmitters and one or two PHYSICAL OSPxx Series Power Pack Sensor
narrow bandwidth receivers each 16mm in diameter. Frequency -- Crystal NC-Brown
WIRING Common-Green
NO-Brown/White
controlled to ±.005%. Transducers -- Oriented north and To HVAC System
south. Housing -- Rugged, high-impact, injection molded plastic. Red (24VDC)
Color coded leads 6” (16.24 cm). Black Red
Blue
Size & Weight: 4.5” dia., 1.5” height; 5 oz. (114 mm dia., 38 mm height; 142 g). (control) Black
Blue* (occupancy)

Black
Color: White. Gray*
Power Requirements: 24 VDC, from OSPxx power pack. (photocell
+ occupancy)

Model Power Requirement Red

Black Load
OSC05 30MA Hot
Black
Blue Blue* (occupancy)
OSC10 40MA Blue Gray*

White
White

Black (photocell
OSC20 32MA Line 120/277/347
VAC60Hz
+ occupancy)

Output: 24 VDC active high logic control signal with short Neutral (White)
circuit protection. *When the photocell function is not being used, connect the Blue Occupancy Sensor lead to the
Operating Environment: 32°F to 104°F (0°C to 40°C); 0% to Blue Power Pack lead. When using the Photocell function, connect the Gray Occupancy Sensor lead
to the Blue Power pack lead–Do not use the Blue Occupancy Sensor lead for the photocell function.
95% relative humidity, non-condensing. For indoor use only.
Warranty: 5 years.

RANGES (APPROXIMATE) Minor Motion, IR Minor Motion, Ultrasonic

Major Motion, IR Major Motion, Ultrasonic

11.5 16
11.5
8.5 11.5
8.5

0 0
0

8.5 11.5
8.5
11.5 16
11.5

5 0 10 20 0
0 32 22.5 2 2.5 32
17 23 23 17 17 23

OSC05-U0W Field of View (in feet) OSC10-U0W Field of View OSC20-U0W Field of View

SPECIFICATION SUBMITTAL
JOB NAME: CATALOG NUMBERS:

JOB NUMBER:

Leviton Mfg. Co., Inc.

59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
2 Visit our Website at: www.leviton.com G-6987/C4-tp