Catalog HY14-2500/US Pressure Control Valves

Technical Information Series R4V and R6V (Pilot Operated)

General Description
Series R4V and R6V pressure relief valves feature a
manual adjustment pilot stage which controls a seated
type main stage.
A vent function with a solenoid operated directional
valve is available for circulation at minimum pressure.

Features
• Pilot operated with manual adjustment.
• 2 interfaces:
– Subplate, ISO 6264 (DIN 24340 Form D)
with VV01 vent valve (R4V)
– Subplate, ISO 6264 (DIN 24340 Form E)
with CETOP 03 vent valve (R6V)
• 3 pressure ranges.
• 3 adjustment modes:
D
– Hand knob
– Acorn nut with lead seal
– Key lock
• Remote control via port X.
Function
R6V06 System pressure in port P is applied via the X gallery
to the spring loaded cone in the pilot head. The pilot
head controls the pressure in the Z area on top of the
main cartridge which is additionally kept close by the
main spring.
If the pilot pressure exceeds the setting pressure the
pilot cone opens and thus limits the pilot pressure.
When the system pressure exceeds the pilot pressure
plus the spring force, the main cartridge opens to port
T and limits the pressure in port P to the adjusted level.
Additionally to the relief function, a solenoid operated
vent valve connects the Z area to tank. This allows oil
circulation from P to T at minimum pressure drop. The
vent valve can either be a standard CETOP 03 valves
(mounting form E) or a sandwich unit (mounting form
D). For both types the vent position can be either at the
energized or de‑energized solenoid.

Code 1 Code 9

R4V-R6V RS_R RS_M.indd, dd

D3 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
 Catalog HY14-2500/US Pressure Control Valves
Ordering Information Series R4V and R6V (Pilot Operated)

R V 5
Pressure Interface Relief Size Maximum Drain Pressure Adjustment Pilot Oil Design Seal Options
Relief Valve Function Pressure Port Range Drain Line Series Check
350 Bar with
(5075 PSI) Factory

Code Description
Code Description
03 NG10
1 Nitrile
06 NG25
5 Fluorocarbon
10 NG32

Code Interface Drain Aux Port

Code Description
3 R4V Y-port NPT
A R4V
7 R4V Y-port SAE
B R6V
9 R4V Y-port BSP

D 9 R6V Y-port BSP

Code Description
1 up to 105 Bar (1523 PSI)
3 up to 210 Bar (3045 PSI)
5 up to 350 Bar (5075 PSI)

Code Description
1 Hand Knob 32mm dia.
(Standard)
3 Acorn Nut with
Lead Seal
4 Key Lock

Code Description Code Description

0 1) Internal
1 2) External from
4
Subplate
Subplate
2 3) External from
Mounting Valve Body
ISO 6264 (Y-port)
6 1) Only with drain port 3
2) R4V only
3) R6V only

Weight:
R4V03 2.7 kg (6.0 lbs.)
R4V06 4.5 kg (9.9 (lbs.)
R4V10 6.0 kg (13.2 lbs.)
R6V03 4.5 kg (9.9 lbs.)
R6V06 5.8 kg (12.8 lbs.)
R6V10 7.8 kg (17.2 lbs.)

R4V-R6V RS_R RS_M.indd, dd

D4 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
Catalog HY14-2500/US Pressure Control Valves
Ordering Information Series R4V and R6V with Vent Function

R V 5
Pressure Interface Relief Size Maximum Drain Pressure Adjustment Pilot Oil Vent Valve Solenoid Design Seal Modifications
Relief Valve Function Pressure Port Range Drain Line Function Voltage Series
350 Bar
(5075 PSI)
Code Description
Code Description 031 2) Vent Function
w/ Slow
03 NG10
Unloading
06 NG25
VFM 3) Vent Function
10 NG32 w/ Slow
Unloading
2) R4V only
Code Interface Drain Aux Port 3) R6V only
3 R4V Y-port NPT
7 R4V Y-port SAE Code Description
9 R4V Y-port BSP 1 Nitrile
9 R6V Y-port BSP 5 Fluorocarbon
D
Code Description
Code Description
1 up to 105 Bar (1523 PSI)
A R4V
3 up to 210 Bar (3045 PSI)
B R6V
5 up to 350 Bar (5075 PSI)

Code Description
Code Description Code Description G0R 12V
1 Hand Knob G0Q 24V
(Standard) GAR 98V
4
3 Acorn Nut with GAG 205V
Subplate
Lead Seal W30 110V / 50 Hz
Mounting 120V / 60 Hz
4 Key Lock
ISO 6264 W31 230V / 50 Hz
6 240V / 60 Hz

Code Description
09 Solenoid not activated
unpress. circulation
11 Solenoid activated
unpress. circulation

Code Description
0 1) Internal
1 2) External from
Subplate
2 3) External from
Valve Body
(Y-port)
1) Only with drain port 3 Weight:
2) R4V only R4V03 4.4 kg (9.7 lbs.)
3) R6V only R4V06 6.2 kg 13.7 (lbs.)
R4V10 7.7 kg (17.0 lbs.)
R6V03 5.9 kg (13.0 lbs.)
R6V06 7.2 kg (15.9 lbs.)
R6V10 9.2 kg (20.3 lbs.)

R4V-R6V RS_R RS_M.indd, dd

D5 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
 Catalog HY14-2500/US Pressure Control Valves
Specifications Series R4V and R6V (Pilot Operated)

R4V and R6V

General
Size NG10 NG25 NG32
Interface Subplate mounting acc. ISO 6264 (DIN 24340)
Mounting Position As desired, horizontal mounting preferred
Ambient Temperature -20°C to +80°C (-4°F to +176°F)
Hydraulic
Operating Pressure Ports P or A and X up to 350 Bar (5075 PSI), Port T or B and Y depressurized
Pressure Range 105, 210, 350 Bar (1523, 3045, 5075 PSI)
Nominal Flow Series R4V 150 LPM (39.7 GPM) 350 LPM (92.6 GPM) 650 LPM (172.0 GPM)
Series R6V 250 LPM (66.1 GPM) 500 LPM (132.3 GPM) 650 LPM (172.0 GPM)

Fluid Hydraulic oil according to DIN 51524 ... 51525

Viscosity Recommended 30 to 50 cSt / mm²/s (139 to 232 SSU)

D
Permitted 20 to 380 cSt / mm²/s (93 to 1761 SSU)
Fluid Temperature
Recommended +30°C to +50°C (+86°F to +122°F)
Maximum -20°C to +70° (-4°F to +158°F)
Filtration ISO 4406 (1999), 18/16/13

R4V and R6V with Vent Function

General
Size NG10 NG25 NG32
Interface Subplate mounting acc. ISO 6264 (DIN 24340)
Mounting Position As desired, horizontal mounting preferred
Ambient Temperature -20°C to +80°C (-4°F to +176°F)
Hydraulic
Operating Pressure Ports P or A and X up to 350 Bar (5075 PSI), Port T or B and Y depressurized
Pressure Range 105, 210, 350 Bar (1523, 3045, 5075 PSI)
Nominal Flow Series R4V 150 LPM (39.7 GPM) 350 LPM (92.6 GPM) 650 LPM (172.0 GPM)
Series R6V 250 LPM (66.1 GPM) 500 LPM (132.3 GPM) 650 LPM (172.0 GPM)
Fluid Hydraulic oil according to DIN 51524 ... 51525
Viscosity Recommended 30 to 50 cSt /mm²/s (139 to 232 SSU)
Permitted 20 to 380 cSt / mm²/s (93 to 1761 SSU)
Fluid Temperature -20°C to +70° (-4°F to +158°F)

Filtration ISO 4406 (1999), 18/16/13
Electrical (solenoid)
Duty Cycle 100% ED CAUTION: Coil temperature up to 180°C (356°F)
Solenoid Connector Connector acc. to EN 175301-803
Protection Class IP65 in accordance with EN 60529 (plugged and mounted)
Code G0R G0Q GAR GAG W30 W31
Supply Voltage 12V 24V 98V 205V 110 at 50Hz 230 at 50Hz
120 at 60Hz 240 at 60Hz
Supply Tolerance +5...-10 +5...-10 +5...-10 +5...-10 +5...-10 +5...-10
Power Consumption Hold 31W 31W 31W 31W 78W 78W
In Rush 31W 31W 31W 31W 264W 264W

Switching Frequency 16,000 (DC), 7200 (AC) switchings/hour maximum

Wiring Minimum 3 x 1.5 mm² Recommended
Wiring Length Maximum 50 m (164 ft.) Recommended
R4V-R6V RS_R RS_M.indd, dd

D6 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
Catalog HY14-2500/US Pressure Control Valves
Performance Curves Series R4V and R6V (Pilot Operated)

The performance curves are measured with external drain.

For internal drain the tank pressure has to be added to curve.

R4V-R6V RS_R RS_M.indd, dd

D7 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
 Catalog HY14-2500/US Pressure Control Valves
Dimensions Series R4V (Pilot Operated)

R4V-R6V RS_R RS_M.indd, dd

D8 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
Catalog HY14-2500/US Pressure Control Valves
Dimensions Series R4V (Pilot Operated)

Inch equivalents for millimeter dimensions are shown in (**)

NG ISO-code x1 x2 x3 x4 x5 x6 x7 y1 y2 y3 y4 y5 y6
10 6264-06-07-*-97 42.9 35.8 21.5 – 7.2 21.5 0.0 66.7 58.8 33.4 7.9 14.3 –
(1.69) (1.41) (0.85) – (0.28) (0.85) (0.00) (2.63) (2.31) (1.31) (0.31) (0.56) –
25 6264-08-11-*-97 60.3 49.2 39.7 – 11.1 20.6 0.0 79.4 73.0 39.7 6.4 15.9 –
(2.37) (1.94) (1.56) – (0.44) (0.81) (0.00) (3.13) (2.87) (1.56) (0.25) (0.63) –
32 6264-10-15-*-97 84.2 67.5 59.5 42.1 16.7 24.6 0.0 96.8 92.8 48.4 3.8 21.4 –
(3.31) (2.66) (2.34) (1.66) (0.66) (0.97) (0.00) (3.81) (3.65) (1.91) (0.15) (0.84) –
Tolerance at X and Y pin holes and screw holes ±0.1, at port holes ±0.2.

NG ISO-code B1 B2 H1 H2 H3 H4 H5 H6 L1 L2 L3 L4 L5 L6
10 6264-06-07-*-97 87.3 33.4 83.0 21.0 – – 62.5 – 29.0 94.8 – 143.0 181.0 144.8
(3.44) (1.31) (3.27) (0.83) – – (2.46) – (1.14) (3.73) – (5.63) (7.13) (5.76)
25 6264-08-11-*-97 105.0 39.7 109.5 29.0 – – 89.0 – 34.7 126.8 – 143.0 181.0 144.8
(4.13) (1.56) (4.31) (1.14) – – (3.50) – (1.37) (4.99) – (5.63) (7.13) (5.76)
32 6264-10-15-*-97 120.0 48.4 120.0 29.0 –
(4.72) (1.91) (4.72) (1.14) –
–
–
99.5
(3.92)
– 30.6 144.3 – 143.0 181.0 144.8
– (1.20) (5.68) – (5.63) (7.13) (5.76) D

NG ISO-code d1max d2max d3 t3 d4 t4 d5 d6
10 6264-06-07-*-97 15.0 7.0 7.1 8.0 M10 16.0 10.8 17.0
(0.59) (0.28) (0.28) (0.31) (0.63) (0.43) (0.67)
25 6264-08-11-*-97 23.4 7.1 7.1 8.0 M10 18.0 10.8 17.0
(0.92) (0.28) (0.28) (0.31) (0.71) (0.43) (0.67)
32 6264-10-15-*-97 32.0 7.1 7.1 8.0 M10 20.0 10.8 17.0
(1.26) (0.28) (0.28) (0.31) (0.79) (0.43) (0.67)

Seal
NG ISO-code Bolt Kit Nitrile Fuorocarbon Surface Finish

10 6264-06-07-*-97 BK505 4xM10 x 35-DIN 912 12.9 63 Nm S26-58507-0 S26-58507-5

(46.5 lb.-ft.)
±15%
25 6264-08-11-*-97 BK485 4xM10 x 45-DIN 912 12.9 63 Nm S26-58475-0 S26-58475-5
(46.5 lb.-ft.)
±15%
32 6264-10-15-*-97 BK506 6xM10 x 45-DIN 912 12.9 63 Nm S26-58508-0 S26-58508-5
(46.5 lb.-ft.)
±15%

NG ISO-code Subplate Size

10 6264-06-07-*-97 SPP3M6B910 A, B = 3/4" BSPP
x, y = 1/4" BSPP

25 6264-08-11-*-97 SPP6M8B910 A, B = 1" BSPP
x, y = 1/4" BSPP

32 6264-10-15-*-97 SPP10M12B910 A, B = 1 1/2" BSPP

x, y = 1/4" BSPP

R4V-R6V RS_R RS_M.indd, dd

D9 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
 Catalog HY14-2500/US Pressure Control Valves
Dimensions Series R6V (Pilot Operated)

Y: external drain port

G 1/8"

R4V-R6V RS_R RS_M.indd, dd

D10 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
Catalog HY14-2500/US Pressure Control Valves
Dimensions Series R6V (Pilot Operated)

Inch equivalents for millimeter dimensions are shown in (**)

NG ISO-code x1 x2 x3 x4 x5 x6 x7 y1 y2 y3 y4 y5 y6

10 6264-06-09-*-97 53.8 47.5 0.0 – 22.1 – 22.1 53.8 – 26.9 – – –
(2.12) (1.87) (0.00) – (0.87) – (0.87) (2.12) – (1.06) – – –
25 6264-08-13-*-97 66.7 55.6 23.8 – 11.1 – 33.4 70.0 – 35.0 – – –
(2.63) (2.19) (0.94) – (0.44) – (1.31) (2.76) – (1.38) – – –
32 6264-10-17-*-97 88.9 76.2 31.8 – 12.7 – 44.5 82.6 – 41.3 – – –
(3.50) (3.00) (1.25) – (0.50) – (1.75) (3.25) – (1.63) – – –
Tolerance at X and Y pin holes and screw holes ±0.1, at port holes ±0.2.

NG ISO-code B1 B2 H1 H2 H3 H4 H5 H6 L1 L2 L3 L4 L5 L6
10 6264-06-09-*-97 80.0 26.9 114.0 27.0 88.0 – 25.0 25.0 52.5 118.5 141.0 – 180.0 29.5
(3.15) (1.06) (4.49) (1.06) (3.46) – (0.98) (0.98) (2.07) (4.67) (5.55) – (7.09) (1.16)
25 6264-08-13-*-97 100.0 35.0 117.5 45.5 91.5 – 25.0 12.0 37.9 124.5 141.0 – 180.0 36.5
(3.94) (1.38) (4.63) (1.79) (3.60) – (0.98) (0.47) (1.49) (4.90) (5.55) – (7.09) (1.44)
32

6264-10-17-*-97 120.0 41.3 123.0 52.0 97.0
(4.72) (1.63) (4.83) (2.05) (3.82)
–
–
25.0 13.5 45.0 153.0 141.0 –
(0.98) (0.53) (1.77) (6.02) (5.55) –
180.0 36.5
(7.09) (1.83) D

NG ISO-code d1max d2max d3 t3 d4 t4 d5 d6
10 6264-06-09-*-97 14.7 4.8 7.5 10.0 M12 20.0 13.5 20.0
(0.58) (0.19) (0.30) (0.39) (0.79) (0.53) (0.79)
25 6264-08-13-*-97 23.4 6.3 7.5 10.0 M16 27.0 17.5 25.0
(0.92) (0.25) (0.30) (0.39) (1.06) (0.69) (0.98)
32 6264-10-17-*-97 32.0 6.3 7.5 10.0 M18 28.0 20.0 30.0
(1.26)  (0.25) (0.30) (0.39) (1.10) (0.79) (1.18)

Seal
NG ISO-code Bolt Kit Nitrile Fluorocarbon Surface Finish

10 6264-06-09-*-97 BK494 4xM12 x 45-DIN 912 12.9 108 Nm S26-96396-0 S26-96396-5

(79.6 lb.-ft.)
±15%
25 6264-08-13-*-97 BK366 4xM16 x 70-DIN 912 12.9 264 Nm S26-96589-0 S26-96589-5
(194.7 lb.-ft.)
±15%
32 6264-10-17-*-97 BK507 4xM18 x 75-DIN 912 12.9 398 Nm S26-96392-0 S26-96392-5
(293.5 lb.-ft.)
±15%

NG ISO-code Subplate Size

10 6264-06-09-*-97 SPP3R6B910 P, T = 3/4" BSPP
x = 1/4" BSPP

25 6264-08-13-*-97 SPP6R8B910 P, T = 1 1/4" BSPP
x = 1/4" BSPP

32 6264-10-17-*-97 SPP10R12B910 P, T = 1 1/2" BSPP

x, y = 1/4" BSPP

R4V-R6V RS_R RS_M.indd, dd

D11 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
 Catalog HY14-2500/US Pressure Control Valves
Dimensions Series R4V with Vent Function

R4V-R6V RS_R RS_M.indd, dd

D12 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
Catalog HY14-2500/US Pressure Control Valves
Dimensions Series R4V with Vent Function

Inch equivalents for millimeter dimensions are shown in (**)

NG ISO-code x1 x2 x3 x4 x5 x6 x7 y1 y2 y3 y4 y5 y6
10 6264-06-07-*-97 42.9 35.8 21.5 – 7.2 21.5 0.0 66.7 58.8 33.4 7.9 14.3 –
(1.69) (1.41) (0.85) – (0.28) (0.85) (0.00) (2.63) (2.31) (1.31) (0.31) (0.56) –
25 6264-08-11-*-97 60.3 49.2 39.7 – 11.1 20.6 0.0 79.4 73.0 39.7 6.4 15.9 –
(2.37) (1.94) (1.56) – (0.44) (0.81) (0.00) (3.13) (2.87) (1.56) (0.25) (0.63) –
32 6264-10-15-*-97 84.2 67.5 59.5 42.1 16.7 24.6 0.0 96.8 92.8 48.4 3.8 21.4 –
(3.31) (2.66) (2.34) (1.66) (0.66) (0.97) (0.00) (3.81) (3.65) (1.91) (0.15) (0.84) –
Tolerance at X and Y pin holes and screw holes ±0.1, at port holes ±0.2.

NG ISO-code B1 B2 B3 H1 H2 H3 H4 L1 L2 L3 L4 L5 L6 L7
10 6264-06-07-*-97 87.3 33.4 70.0 130.0 21.0 68.5 109.5 29.0 94.8 – 143.0 181.0 165.6 144.8
(3.44) (1.31) (2.76) (5.12) (0.83) (2.70) (4.31) (1.14) (3.73) – (5.63) (7.13) (6.52) (5.70)
25 6264-08-11-*-97 105.0 39.7 70.0 156.5 29.0 95.0 136.0 34.7 126.8 – 143.0 181.0 165.6 144.8
(4.13) (1.59) (2.76) (6.16) (1.14) (3.74) (5.35) (1.37) (4.99) – (5.63) (7.13) (6.52) (5.70)
32 6264-10-15-*-97 120.0 48.4 70.0 167.0 29.0 105.5 146.5 30.6 144.3 –
(4.72) (1.91) (2.76) (6.57) (1.14) (4.15) (5.77) (1.20) (5.68) –
143.0 181.0 165.6 144.8
(5.63) (7.13) (6.52) (5.70) D

NG ISO-code d1max d2max d3 t3 d4 t4 d5 d6
10 6264-06-07-*-97 15.0 7.0 7.1 8.0 M10 16.0 10.8 17.0
(0.59) (0.28) (0.28) (0.31) (0.63) (0.43) (0.67)
25 6264-08-11-*-97 23.4 7.1 7.1 8.0 M10 18.0 10.8 17.0
(0.92) (0.28) (0.28) (0.31) (0.71) (0.43) (0.67)
32 6264-10-15-*-97 32.0 7.1 7.1 8.0 M10 20.0 10.8 17.0
(1.26) (0.28) (0.28) (0.31) (0.79) (0.43) (0.67)

Seal
NG ISO-code Bolt Kit Nitrile Fluorocarbon Surface Finish

10 6264-06-07-*-97 BK505 4xM10 x 35-DIN 912 12.9 63 Nm S26-58507-0 S26-58507-5

(46.5 lb.-ft.)
±15%
25 6264-08-11-*-97 BK485 4xM10 x 45-DIN 912 12.9 63 Nm S26-58475-0 S26-58475-5
(46.5 lb.-ft.)
±15%
32 6264-10-15-*-97 BK506 6xM10 x 45-DIN 912 12.9 63 Nm S26-58508-0 S26-58508-5
(46.5 lb.-ft.)
±15%
VV01* S56-40609-0 S56-40609-5
* Please combine seal kit of one size with seal kit of VV01 solenoid for complete seal kit.

NG ISO-code Subplate Size

10 6264-06-07-*-97 SPP3M6B910 A, B = 3/4" BSPP
x, y = 1/4" BSPP

25 6264-08-11-*-97 SPP6M8B910 A, B = 1" BSPP
x, y = 1/4" BSPP

32 6264-10-15-*-97 SPP10M12B910 A, B = 1 1/2" BSPP

x, y = 1/4" BSPP

R4V-R6V RS_R RS_M.indd, dd

D13 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
 Catalog HY14-2500/US Pressure Control Valves
Dimensions Series R6V with Vent Function

Y: external
drain port
1/8" BSPP

R4V-R6V RS_R RS_M.indd, dd

D14 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
Catalog HY14-2500/US Pressure Control Valves
Dimensions Series R6V with Vent Function

Inch equivalents for millimeter dimensions are shown in (**)

NG ISO-code x1 x2 x3 x4 x5 x6 x7 y1 y2 y3 y4 y5 y6

10 6264-06-09-*-97 53.8 47.5 0.0 – 22.1 – 22.1 53.8 – 26.9 – – –
(2.12) (1.87) (0.00) – (0.87) – (0.87) (2.12) – (1.06) – – –
25 6264-08-13-*-97 66.7 55.6 23.8 – 11.1 – 33.4 70.0 – 35.0 – – –
(2.63) (2.19) (0.91) – (0.44) – (1.31) (2.76) – (1.38) – – –
32 6264-10-17-*-97 88.9 76.2 31.8 – 12.7 – 44.5 82.6 – 41.3 – – –
(3.50) (3.00) (1.25) – (0.50) – (1.75) (3.25) – (1.63) – – –
Tolerance at X and Y pin holes and screw holes ±0.1, at port holes ±0.2.

NG ISO-code B1 B2 H1 H2 H3 H4 H5 H6 L1 L2 L3 L4 L5 L6
10 6264-06-09-*-97 80.0 26.9 206.0 27.0 88.0 136.5 25.0 12.0 52.5 118.5 163.8 – 180.0 36.5
(3.15) (1.06) (8.11) (1.06)
(3.46)
(5.37) (0.98) (0.47) (2.07) (4.67) (6.45) – (7.09) (1.44)
25 6264-08-13-*-97 100.0 35.0 210.0 45.5 91.5 140.0 25.0 12.0 37.9 124.5 163.8 – 180.0 36.5
(3.94) (1.38) (8.27) (1.79)
(3.60)
(5.51) (0.98) (0.47) (1.49) (4.90) (6.45) – (7.09) (1.44)
32 6264-10-17-*-97 120.0 41.3 215.5 52.0 97.0
(4.72) (1.63) (8.48) (2.05)
145.5 25.0 12.0 45.0 153 163.8 – 180.0 36.5
(3.82)
(5.73) (0.98) (0.47) (1.77) (6.02) (6.45) – (7.09) (1.44) D

NG ISO-code d1max d2max d3 t3 d4 t4 d5 d6
10 6264-06-09-*-97 14.7 4.8 7.5 10.0 M12 20.0 13.5 20.0
(0.58) (0.19) (0.30) (0.39) (0.79) (0.53) (0.79)
25 6264-08-13-*-97 23.4 6.3 7.5 10.0 M16 27.0 17.5 25.0
(0.92) (0.25) (0.30) (0.39) (1.06) (0.69) (0.98)
32 6264-10-17-*-97 32.0 6.3 7.5 10.0 M18 28.0 20.0 30.0
(1.26)  (0.25) (0.30) (0.39) (1.10) (0.79) (1.18)

Seal
Surface Finish
NG ISO-code Bolt Kit Nitrile Fluorocarbon

10 6264-06-09-*-97 BK494 4xM12 x 45-DIN 912 12.9 108 Nm S26-96395-0 S26-96395-5

(79.6 lb.-ft.)
±15%
25 6264-08-13-*-97 BK366 4xM16 x 70-DIN 912 12.9 264 Nm S26-96589-0 S26-96589-5
(194.7 lb.-ft.)
±15%
32 6264-10-17-*-97 BK507 4xM18 x 75-DIN 912 12.9 398 Nm S26-96392-0 S26-96392-5
(293.5 lb.-ft.)
±15%

NG ISO-code Subplate Size

10 6264-06-09-*-97 SPP3R6B910 P, T = 3/4" BSPP
x = 1/4" BSPP

25 6264-08-13-*-97 SPP6R8B910 P, T = 1 1/4" BSPP
x = 1/4" BSPP

32 6264-10-17-*-97 SPP10R12B910 P, T = 1 1/2" BSPP

x, y = 1/4" BSPP

R4V-R6V RS_R RS_M.indd, dd

D15 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA