Drill Pipe Performance Sheet

www.NOV.com/GrantPrideco Phone: +1 (281) 878-8000

Failure: Connection ID is too large.
Drill Pipe Configuration
Pipe Body OD (in) 3.500 80 % Inspection Class
Pipe Body Wall Thickness (in) 0.449 Nominal Weight Designation 15.50
Pipe Body Grade G-105 Drill Pipe Approximate Length (ft) 32.1
Drill Pipe Length Range2 SmoothEdge Height (in) 3/32 Raised
Connection XT39 Tool Joint SMYS (psi) 120,000
Tool Joint OD (in) 4.875 Upset Type EU
Tool Joint ID (in) 2.563 Max Upset OD (DTE) (in) 3.875

Pin Tong (in) 12 Friction Factor 1.0

Box Tong (in) 17 Note: Tong space may include hardfacing.

Drill Pipe Performance Drill-Pipe Length Range2

Performance of Drill Pipe with Pipe Body at Best Estimates Nominal

(without Coating) (with Coating) (least accurate)
80 % Inspection Class
Applied Make-up Operational Max Tension
Drill Pipe Adjusted Weight (lbs/ft)17.96 17.35
Torque
(ft-lbs) Torque (ft-lbs) (lbs) Fluid Displacement (gal/ft)0.27 0.27
Tension Only 0 350,900 Fluid Displacement (Bbls/ft) 0.0065 0.0063
Maximum MUT 22,200 Combined Loading Fluid Capacity (gal/ft) 0.27 0.26 0.28
21,100 125,900
Fluid Capacity (Bbls/ft) 0.0063 0.0062 0.0066
Tension Only 0 350,900 Drift Size (in) 2.438
Minimum MUT 18,500 Combined Loading 16,400 241,700 Note: Oil field barrel equals 42 US gallons.
Note: Drill pipe assembly values are best estimates and may vary due to pipe body mill tolerance, internal plastic coating, and other factors.

Connection Performance XT39 ( 4.875 (in) OD X 2.563 (in) ID ) 120,000 (psi)

Applied Make-up Tension at Shoulder Tension at Connection

Torque Separation Yield
Tool Joint Dimensions
(ft-lbs) (lbs) (lbs) Balanced OD (in) 4.992
Maximum Make-up Torque 22,200 Tensile Limited 640,100 Minimum Tool Joint OD for API 4.653
Premium Class (in)
Minimum Make-up Torque 18,500 677,200 724,100
Minimum Tool Joint OD for 4.653
Note: To maximize connection operational tensile, a MUT (T4) = 19,800 (ft-lbs) should be applied. Counterbore (in)

Tool Joint Torsional Strength (ft-lbs) 37,000

Tool Joint Tensile Strength (lbs) 724,100

Elevator Shoulder Information Elevator OD 3/32 Raised 5.062 (in)

SmoothEdge Height Nominal Tool Joint Worn to Bevel Worn to Min TJ OD for
3/32 Raised OD Diameter API Premium Class
Box OD (in) 5.062 4.875 4.786 4.653
Elevator Capacity (lbs) 854,100 693,000 618,600 510,100
Note: Elevator capacity based on assumed Elevator Bore, no wear factor, and contact stress of 110,100psi.
Assumed Elevator Bore Diameter (in) 3.969 Note: A raised elevator OD increases elevator capacity without affecting make-up torque.

Pipe Body Slip Crushing Capacity Pipe Body Configuration ( 3.5 (in) OD 0.449 (in) Wall G-105 )
Nominal 80 % Inspection Class API Premium Class
Slip Crushing Capacity (lbs) 352,400 277,200 277,200
Note: Slip Crushing: Slip crushing load is calculated with the Spiri-Reinhold equation from “Why Does Drill Pipe
Assumed Slip Length (in) 16.5 Fail in the Slip Area” World Oil, 1959 for the slip length and transverse load factor shown and is for reference
only. Slip crushing is dependent on the slip design and condition, coefficient of friction, loading conditions, time in
Transverse Load Factor (K) 4.2 slips, drill pipe OD and wall variation, and other factors. Consult with the slip manufacturer for additional
information.

Pipe Body Performance Pipe Body Configuration ( 3.5 (in) OD 0.449 (in) Wall G-105 )
Nominal 80 % Inspection Class API Premium Class
Pipe Tensile Strength (lbs) 451,900 350,900 350,900
Pipe Torsional Strength (ft-lbs) 29,500 22,600 22,600
TJ/PipeBody Torsional Ratio 1.25 1.64 1.64
80% Pipe Torsional Strength (ft-lbs) 23,600 18,100 18,100
Burst (psi) 23,573 21,552 21,552 Note: Nominal Burst
calculated at 87.5% RBW
Collapse (psi) 23,484 20,260 20,260 per API.
Pipe OD (in) 3.500 3.320 3.320
Wall Thickness (in) 0.449 0.359 0.359
Nominal Pipe ID (in) 2.602 2.602 2.602
Cross Sectional Area of Pipe Body (in^2) 4.304 3.342 3.342
Cross Sectional Area of OD (in^2) 9.621 8.659 8.659
Cross Sectional Area of ID (in^2) 5.317 5.317 5.317
Section Modulus (in^3) 2.923 2.239 2.239
Polar Section Modulus (in^3) 5.847 4.477 4.477
Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully
responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied
warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear
conditions (remaining body wall) is for information only and does not represent or imply acceptable operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance
ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box ID’s, tool joint ID refers to
the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.
www.NOV.com/GrantPrideco/CustomerFeedback Customer Created 07-30-2013
 Operational Limits of Drill Pipe
Connection XT39 Tool Joint OD (in) 4.875 Tool Joint ID (in) 2.563 Tool Joint Specified Minimum 120,000
Yield Strength (psi)

Pipe Body 80 % Inspection Class Pipe Body OD (in) 3.5 Wall Thickness (in) 0.449 Pipe Body Grade G-105

Combined Loading for Drill Pipe at Combined Loading for Drill Pipe at
Maximum Make-up Torque = 22,200 (ft-lbs) Minimum Make-up Torque = 18,500 (ft-lbs)

Operational Assembly Pipe Body Connection Max Operationa Assembly Pipe Body Connection
l Torque Max Tension Max Tension
Torque Max Tension Max Tension Tension Max Tension
(ft-lbs) (lbs) (lbs) (lbs) (ft-lbs) (lbs) (lbs) (lbs)

350,900 640,100 0 350,900 350,900 677,200

0 350,900
350,500 640,100 900 350,600 350,600 677,200
1,100 350,500
349,200 640,100 1,700 349,900 349,900 677,200
2,200 349,200
347,100 640,100 2,600 348,500 348,500 677,200
3,300 347,100
344,200 640,100 3,400 346,900 346,900 677,200
4,400 344,200
339,900 640,100 4,300 344,500 344,500 677,200
5,600 339,900
335,100 640,100 5,200 341,500 341,500 677,200
6,700 335,100
329,300 640,100 6,000 338,300 338,300 677,200
7,800 329,300
322,500 640,100 6,900 334,100 334,100 677,200
8,900 322,500
314,700 640,100 7,800 329,300 329,300 677,200
10,000 314,700
305,700 640,100 8,600 324,500 324,500 677,200
11,100 305,700
295,400 640,100 9,500 318,400 318,400 677,200
12,200 295,400
283,700 640,100 10,300 312,300 312,300 677,200
13,300 283,700
270,500 640,100 11,200 304,800 304,800 677,200
14,400 270,500
255,400 640,100 12,100 296,400 296,400 677,200
15,500 255,400
236,500 640,100 12,900 288,100 288,100 677,200
16,700 236,500
216,300 640,100 13,800 277,900 277,900 677,200
17,800 216,300
192,500 640,100 14,700 266,500 266,500 677,200
18,900 192,500
163,500 640,100 15,500 255,400 255,400 677,200
20,000 163,500
125,900 640,100 16,400 241,700 241,700 677,200
21,100 125,900
Operational drilling torque is limited by the Make-up Torque. Operational drilling torque is limited by the Make-up Torque.

Connection
Make-up Torque Range
Make-up Torque Connection Max
(ft-lbs) Tension (lbs)
Min MUT 18,500 677,200
18,900 691,900
19,300 706,500
19,700 721,100
20,100 712,900
20,600 695,600
21,000 681,700
21,400 667,800
21,800 653,900
Max MUT 22,200 640,100
Note: Recommended MUT should always be used when possible. If not possible, MUT should be as close to Recommended MUT as possible.

Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and
suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated
based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable
operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the
application. For API connections that have different pin and box ID’s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.

07-30-2013
 Connection Wear Table
Connection XT39 Tool Joint OD (in) 4.875 Tool Joint ID (in) 2.563 Tool Joint Specified Minimum 120,000
Yield Strength (psi)

Connection
Wear
Tool Connection Max Connection Max Min MUT Connection Max
Torsional Tension Tension
New OD Joint OD MUT
(in) Strength (ft-lbs) (ft-lbs) (lbs) (ft-lbs) (lbs)

4.875 37,000 22,200 640,100 18,500 677,200

4.855 36,300 21,800 651,400 18,200 668,800
4.835 35,700 21,400 662,700 17,900 660,400
4.814 35,100 21,000 673,800 17,500 648,500
4.794 34,400 20,700 681,400 17,200 640,000
4.774 33,800 20,300 683,000 16,900 622,900
4.754 33,200 19,900 676,200 16,600 599,100
4.734 32,600 19,500 668,900 16,300 575,700
4.714 32,000 19,200 658,000 16,000 552,800
4.693 31,300 18,800 634,300 15,700 529,700
Worn OD
4.673 30,700 18,400 606,700 15,400 507,800
4.653 30,100 18,100 582,800 15,100 486,200

Pipe Body
Combined Loading Table (Torque-Tension)
Pipe Body 80 % Inspection Class Pipe Body OD (in) 3.5 Wall Thickness (in) 0.449 Pipe Body Grade G-105

Pipe Body Torque

0 2,100 4,100 6,200 8,200 10,300 12,300 14,400 16,400 18,500 20,500 22,600
(ft-lbs)

Pipe Body Max

350,900 349,400 345,000 337,400 327,000 312,300 294,400 270,500 241,500 201,600 147,800 7,100
Tension (lbs)

Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and
suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated
based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable
operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the
application. For API connections that have different pin and box ID’s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.

07-30-2013