Scribd
Upload
366 views1 page

Electrical Work Checklist: Saline Water Desalination Plant On The West Coast

A checklist was provided for inspecting electrical work at a desalination plant on the West Coast. The checklist identifies risks like electrocution, arc flash, and falling objects. It ensures safe distances are maintained from power lines, isolation of power sources through locking and tagging, that tools are tested, and proper PPE like helmets and gloves are used. The inspection results in approving or not approving the electrical work based on meeting these safety requirements.

Uploaded by

BRC HSE Dept.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
366 views1 page

Electrical Work Checklist: Saline Water Desalination Plant On The West Coast

A checklist was provided for inspecting electrical work at a desalination plant on the West Coast. The checklist identifies risks like electrocution, arc flash, and falling objects. It ensures safe distances are maintained from power lines, isolation of power sources through locking and tagging, that tools are tested, and proper PPE like helmets and gloves are used. The inspection results in approving or not approving the electrical work based on meeting these safety requirements.

Uploaded by

BRC HSE Dept.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Saline Water Desalination plant on the West Coast

ELECTRICAL WORK CHECKLIST

PTW Ref. No. Contractor Name: Date of Inspection:


Project Name Work Location:

Identify risk associated with Electrical


Electrocution Arc Flash Flying particles Noise
Falling Objects Protruding objects, parts Tripping / Slipping Electric shock
Fire Manual handling Electric Burn Near Overhead lines
Other(Specify):
Precaution require to complete the work safely Yes No N/A
Is the safe distance maintained? Yes No Voltage........................... Distance......................
Does the work require access to confined spaces? If yes, obtain a confined space entry permit
Have all possible sources of electrical power been isolated, locked and properly tagged (LOTO)?
Is below mentioned any one of Isolation in place and the isolation followed as per procedure?
Switch Out Lockout/ Tag out
Has it been confirmed by testing, that the lines / equipment are de-energized?
Have tools and devices to be used been tested and adjusted?
Appropriate fire extinguisher should be provided.
All the Electrical equipment should be in good working condition.
Electrical equipment checklist should be provided.
Sign board indicating Electrical Hazard is to be sufficiently installed.
Ensure good site housekeeping in the work area is maintained.
Is the safe distance maintained? Yes No Voltage........................... Distance......................
Other (specify):
The following areas / items have been inspected by issuer and receiver
Fire Extinguisher Type...................... Quantity................ Size....................
Access/Escape Route Danger/Waning Sign Lighting Safety Barriers
Stick Portable Radio Other (specify)
PPE Required for the activity
Helmet Safety Shoes Electrical Gloves Half Mask
Safety goggles Reflective Vest Dust Mask Safety clothes
Face shield Arc flash cover all Safety Ear Plugs/muff Arc Flash Face shield

INSPECTION RESULT: NOT APPROVED APPROVED


Remarks:

Inspected and attested by: Sub-Contractor Representative ASRF


Name:
Signature:
Date:

QHSSE/TBM03

You might also like