inLab Software

New digital options

dentsplysirona.com/inLab
 02 I 03

inLab CAD Software

Dental design requires good software
The inLab CAD Software focuses closely on the requirements of dental
laboratories. As a stand-alone CAD component, the application can be used
independently from scanners and production units. Furthermore, inLab Software
is better integrated into the digital workflow between practice and laboratory
than ever before. It also links CAD/CAM processes between different inLab
laboratories, using Connect Case Center.

The inLab design software stands out for its needs-based indications, optimized
design processes, and user-friendly interface. Its four software modules offer a
wide range of indications and functionalities. inLab users can freely decide when
to perform available updates – without counting dongles, mandatory updates,
expiration dates or annual license fees.

Contents inLab CAD Software Modules

inLab CAD Software 03
Implantology Removables Interface
Basic module 06
module module module
Implantology module 12
Removables module 16
Interface module 20 Basic module*
inLab CAM Software 22

* Minimum requirement for Implantology, Removables, and Interface modules

 04 I 05

inLab Software
Easy to use – Efficient support for design and function
professional results
Intuitive, simple, process-oriented – inLab CAD Software is one of the most user-
friendly applications in dental CAD/CAM. The user interface clearly displays all relevant
information and selection menus on a case-specific basis. The inLab Software
workflow with focus on dental technology professionally and reliably guides the user
through all steps to the desired restoration result without needing to forgo individual
design and functional options. The design process is supported by short menu paths,
quick tool access and a variety of view options.

Multi-layer gingiva for separating the framework Gingiva element design for all restoration types.
structure with gingival element and veneer structure
for bridge design projects involving the gingiva.

Tooth color display in inLab Software for digital Virtual insertion for designing several restoration
impressions that were sent via Connect Case Center. layers in complex cases.

Everything at a glance
The intelligent administration phase does more than display the entire restoration case with all desired design
details on a clearly structured screen. The flexible case administration feature also saves valuable user time if
adjustments are necessary during the design process.

Virtual articulator for visualizing entire motion ranges inLab Check for reviewing the fully designed restoration
and determining static and dynamic contact surfaces for possible critical areas, using a FEM load calculation
for proper functional occlusion. on the basis of the material selected for the restoration.
 Basic module 06 I 07

inLab CAD Software: Digital Models

Basic module As of inLab CAD Software 18.0, digital impression data
models can be designed with removable or non-­
removable dies – for conventional full arch models and
The Basic module of the inLab CAD Software covers basic indications and provides all for models with implant analogues.* The design tools
can be used to create a separate gingival mask for any
necessary design tools along with access to digital impression with Connect Case model type.
Center.

Inlay Onlay Veneer

For dies, users can either transfer existing preparation In the case of implant models, the selected model
margins from the inLab Software or enter them manu- analog is automatically included in the calculation.
ally (e.g. for removable adjacent teeth). Die fitting and Analogues from several manufacturers are available.
Full crown Coping Fully anatomical bridge
undercuts for removable and non-removable die
elements can be individually adjusted.

Anatomically reduced bridge Models

Overview of inLab CAD Software Basic module:

• Inlay, onlay, veneer, full crown, bridges, coping, bridge • Virtual insertion
frameworks, multi-layer, models • Virtual articulator Support structures for various articulator attachments Additional model labels can be inserted in the finalizing
• All design tools • Smile design can be added to the model and edited.** phase of the model. The finished model data can be
• J.O.B.S. Jaw Orientated Biogeneric Settings sent to production via, for instance, an in-house
• Gingiva element 3D printer or a central production unit.
• 1:1 copy mode • Connect Case Center access
• Tooth databases • inLab Check to review design data for stress sensitivity
* Implantology module required for implant models
** Vertext/Ceramco articulator and others
 Basic module 08 I 09

Quick and reliable results

1:1 copy mode

With the 1:1 copy mode, all geometric dimensions of a restoration can be faithfully copied and transferred to
the final restoration. That saves an enormous amount of work time. The feature is particularly well-suited for large
bridge and implant cases with a gingival component, in which existing long-term temporary solutions are to be
precisely converted to final restorations.

J.O.B.S. – Jaw Orientated Biogeneric Setting

This unique jaw-orientated biogeneric procedure reconstructs teeth true to nature. The inLab CAD Software
includes the positioning and morphology of the existing teeth in its analysis and uses this data to generate
patient-specific fully anatomical first proposals – both for individual teeth in the anterior and posterior regions as
well as for large bridges and multiple unit restorations. That eliminates the need to perform time-consuming
design rework.
Basic module 10 I 11

Connect Case Center links digital processes –

practice-to-lab and lab-to-lab
The Basic module of the inLab CAD Software offers dental laboratories access to the
digital transmission platform Connect Case Center. It offers safe and convenient sharing
options for scan, restoration and order data, both between practice and laboratory
and between dental laboratories.

Connect Case Center: Connect Case Center:

From practice-to-lab From lab-to-lab

Convenient transfer of digital impressions from Dentsply Transmission of inLab scan or restoration data from
Sirona intraloral cameras including all order information one laboratory to another, directly from the inLab
as well as image and additional data from the practice Software via Connect Case Center:
to the laboratory within seconds: • Expansion of production capacities and use of external
• Secure and seamless transfer to the inLab CAD know-how
­software for subsequent restoration design • Receiving and/or offering design service for
• inLab users can use the design service for CEREC laboratories
practices: Dental technology competence for complex • Order-based chat via Connect Case Center possible
or aesthetically more demanding orders, which are
designed in the laboratory and finalised in the • No additional costs for separate cloud services or
practice the like
• Alternatively, secure data transfer via the new • The inLab Software provides direct access to the
­Connect Case Center Inbox for inLab labs and for patient-specific solutions from Atlantis for the design
labs using other software and manufacture of abutments and superstructures
from Dentsply Sirona

With the optional Interface module, the inLab CAD Software can be also used to process intraoral
and extraoral scan data that are transmitted in STL format. This enables the integration of scan data
from intraoral scanners by other manufacturers in the inLab CAD Software restoration design.
 Implantology module 12 I 13

inLab CAD Software:

Implantology module
The Implantology module of the inLab CAD Software comprises all required CAD tools
and functions for the customized treatment of single and multiple implants as well as
for surgical guide design – for seamless transfer to the inLab production units,
inLab MC X5 and inLab MC XL. Or alternatively, for export to other production units.

For greater flexibility, the tooth setup and implant superstructure can be designed separately. Teeth can be set
up according to function and with consideration for esthetics, independent of the implant position.

Screw-retained bridges and bars at implant level Screw-retained bridges and bars on multi-unit
­abutments and adhesive caps

The screw channel tool allows for setting of individual screw channels with the corresponding settings for
position, angle and diameter. This is a convenient tool, for example to generate screw-retained restorations on
scanned standard abutments.

Individual abutments on TiBase adhesive base and Surgical guide

from titanium preforms

Individual production methods for inLab users

As of inLab SW 18.0, inLab users can access the extensive service portfolio of Dentsply Sirona with
Overview of inLab CAD Software Implantology module: even greater ease and flexibility for implant cases. You can decide at any time on a case-by-case basis
whether the design is to be done directly in-house with the inLab Software or alternatively, whether
• Screw-retained bridges and bars at implant level • Individual abutments (zirconium oxide and titanium) Atlantis® patient-specific solutions are to be used for the design and production of abutments and
• Surgical guide (integrated implantology) superstructures – with direct access to the Atlantis® WebOrder system from within the inLab Software.
• Screw-retained bridges and bars on multi-unit
abutments
 Implantology module 14 I 15

Screw-retained bridges and bars at implant level Surgical guide for integrated implantology

With inLab CAD Software, individual surgical guides can be quickly designed and
produced in the lab at low cost. The surgical guide created with CAD/CAM is the
ideal planning basis for surgical implementation as part of the integrated implant
planning with 3D X-ray systems from Dentsply Sirona.

Design professional implant-supported bridges and bars with the inLab CAD SW at
implant level, based on high-precision inEos X5 scan data and in combination with the
FLO-S scanbody by Atlantis®. The restoration data can then be made available for
production in a suitable CAD/CAM production system.

Screw-retained bridges and bars on multi-unit abutments and adhesive caps

The prerequisite is the intraoral scan of the situation The optical data is combined with the 3D X-ray data
from the model, for example by using inEos X5 or by (Orthophos SL 3D, Orthophos XG 3D or Galileos),
way of a digital intraoral impression. In addition, a for subsequent implant planning and output as a
restoration is designed for implant planning based on *.cmg.dxd planning file.
prosthetic aspects. These optical data are then
exported.*

For in-house production, for example with inLab MC X5 (zirconium oxide or PMMA),
screw-retained bridges and bars are designed on multi-unit abutments by nt-trading
and Medentika, using inLab CAD SW. The inEos X5 model scanner relies on the special
inPost scanbody by Dentsply Sirona to acquire the exact implant position.

Custom abutments on TiBase adhesive base and from titanium preforms

The *.cmg.dxd planning file is imported into the inLab This surgical guide is then milled (e.g. with the
CAD Software to design the surgical guide.* The design inLab MC X5 or inLab MC XL**) or exported as STL
of the surgical guide can be customized for any span for production with a 3D printer.***
size with one or more drill holes.

The inLab CAD Software enables the in-house production of individual abutments: as a
milled zirconium oxide abutment for bonding with TiBase by Dentsply Sirona or made
from one-piece titanium preforms* (e.g. milled with inLab MC X5). The design is done
directly or top-down, i.e. the fully contoured design is split into crown or crown coping
and abutment.

* Required interface included in the Implantology module of the inLab CAD SW

** inLab MC XL is limited to surgical guides with a maximum of one drilling hole
* Medentika PreFaces® *** inLab CAD SW Interface module required
 Removables module 16 I 17

inLab CAD Software:

Removables module
With inLab CAD Software, you can quickly and professionally design model casting Removable Partial Denture
prostheses for removable dentures as well as bite splints and impression trays.
Furthermore, the software enables the production of standard bar shapes for
implementation in metal and other materials as well as telescopes. For individual
attachment prostheses, you can select from a database of original design elements
by well-known manufacturers.

The removable partial denture planning is drawn in the You can enter line textures for subsequent display in
work model with clips. the inLab Software during the inEos X5 scan process.

Removable partial dentures Individual impression trays Bite splints

Undercuts on the cast are visualized by undercut The user interface offers access to all necessary
displays. elements (different clip shapes, various retention
shapes, etc.) for the individual design of the removable
partial denture.

Individual attachment prostheses Standard bar shapes Individual primary telescopic and
with original elements for CAD design cone crowns

Overview of inLab CAD SW Removables module:

• Removable partial dentures • Attachment prostheses
• Individual impression trays • Bars
• Bite splints • Telescopes

The removable partial denture prosthesis can be STL export of the restoration data*, wax modeling for
individually adjusted. subsequent casting or direct production using the laser
sintering process.

* inLab CAD SW Interface module required

 Removables module 18 I 19

Individual impression tray Splint

The undercuts of the model are visualized in color. With the help of the intelligent tools, the contour of The inLab Software and inEos X5 are used to scan Undercuts on the cast are visualized by colored
the impression tray can be quickly established. the situation, including the bite block, with subsequent undercut alerts.
transfer to the inLab Splint App. Alternatively, you
can also use STL scan data.*

After drafting the tray design, you can plan a variety You can also set the corresponding holes for the The undercuts are automatically blocked with wax. The splint can be designed individually.
of handle options. impression posts at the implant positions for individual The wax can also be applied individually.
implant impressions.

All elements are merged in the final step. In addition, The tray design can be exported as an STL file* and A number of different tools allow for considering The splint design can be exported as an STL file* and
you can insert a hole pattern for the flow of the then produced with milling or additive methods. the opposing teeth relationship. then produced with milling or additive methods.
impression material.

* inLab CAD SW Interface module required * inLab CAD SW Interface module required
 Interface module 20 I 21

inLab CAD Software: Scanning Design Production

Interface module Primescan or

Atlantis®
Omnicam
inLab is open. With the inLab CAD Software, dental labs can choose whether to
perform the entire CAD/CAM process with the matching inLab components of Connect Connect
Case Case
Dentsply Sirona or whether to include individual solutions by other manufacturers. Center Center

The optional Interface module of the inLab CAD Software with a single license for
Dentsply inLab CAD inLab MC X5
all available inLab interfaces offers a flexible connection of the inLab CAD Software inEos X5
Sirona Software inLab MC XL
to virtually all existing CAD/CAM systems.

For example:
STL STL
• STL import of scan data (extraoral and intraoral scanner), e.g., for design with inLab CAD Software and

Simplified representation.
­production with inLab MC X5 or inLab MC XL
• STL export of inLab restoration data, e.g., for finalizing with other production systems
• STL export from designed model data, e.g., for external model production External Extraoral/
Software Machine
Suppliers intraoral scanner

INFINIDENT Solutions GmbH is an open, digital CAD/CAM service provider for in-practice labs and dental laboratories in Europe for all
manufacturers and systems. As a preferred partner of Dentsply Sirona, INFINIDENT supports inLab users in the production of high-quality
restorations, working models and removable dentures, including implant-based restorations. For more information, visit infinidentsolutions.com
 22 I 23

inLab CAM Software

For a perfect workflow
The two applications, inLab CAD Software for restoration design and inLab CAM
Software for production with inLab MC X5 or inLab MC XL, are optimally connected to
each other and ensure the seamless transfer of design data to automated production.

The inLab CAM Software was specifically developed for the production units of
­Dentsply Sirona and is also open for STL data imports from other CAD applications.
Thanks to the user-friendly interface, all necessary work steps, system configurations
and integrated service functions can be carried out quickly and easily. Moreover, the
software offers a valuable documentation tool for the quality management of dental
­laboratories with all essential information on job history, produced workpieces, and
materials used.

Exemplary efficiency and safety Optimal material utilization

• Start of production immediately after order preparation: • Comprehensive positioning functions and automatic
no waiting for milling path calculation collision control
• Graphic tool and process start management with • Automatic tilting of restorations to available
­perfect overview of workpieces, tools, service life, blank sizes
necessary tool magazines etc. • Automatic undercut detection and individual adjustment
• Extensive archiving functions function
New from inLab CAM SW 19.0* • Multi-block management for up to eight blocks of
• Calculation of wall thicknesses to identify critical areas ­different materials in a single order

• Fitting surface when restauration design does not • Option to restore milled areas in a material blank
correspond to the configuration of the machine New from inLab CAM SW 19.0*
• Material clearance function for dentures offers a better
access to the teeth during bonding
• Grinding of screw channels in implant restorations
made of glass ceramics

Device and tool management Compatible for flexible data import

• Material-specific milling and grinding strategies for • XML-based STL import of restoration data from
occlusal and interdental design details, surface quality e.g. 3Shape (*.3ox) with essential element information
or reducing the size of support pins such as type of restoration, preparation margins,
• Individual determination of detail levels for various insertion axes, screw channels, tooth numbers, etc.
production modes (number of process steps, path • Clear preview and easy data input
spacing and processing speeds) New from inLab CAM SW 19.0*
• Touch-optimized operating functions for control via • Validated interface for importing exocad® restoration
tablet PC data (*.constructioninfo) for processing with
• Tool status display for information about tool wear inLab MC X5 and inLab MC XL
with use of validated materials • Import of restorations with screw channel and margin
New from inLab CAM SW 19.0* line (crowns/bridges with screw channels)
• Additional validated materials from Dentsply Sirona
available for selection: Cercon xt ML, the True Color
Technology as zirconia Multlayer disc (new from
IDS 2019)

* expected to be available in May 2019

 Dentsply Sirona

dentsplysirona.com
Sirona Dental Systems GmbH 
Fabrikstrasse 31, 64625 Bensheim, Germany
Technical changes and errors reserved. Order no. A91100-M44-C204-01-7600, Printed in Germany, Dispatch No. 04605, OEW19 0319 V0