Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    Camshaft

    Uploaded by

    Harzanyi Maldonado
    The document provides specifications and technical details for camshafts used in 3500 Industrial Engines, including part numbers, illustrations of camshaft components and measurements, installation instructions, and specifications for camshaft lobe lift.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Camshaft

    Uploaded by

    Harzanyi Maldonado
    10 views3 pages
    The document provides specifications and technical details for camshafts used in 3500 Industrial Engines, including part numbers, illustrations of camshaft components and measurements, installation instructions, and specifications for camshaft lobe lift.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications and technical details for camshafts used in 3500 Industrial Engines, including part numbers, illustrations of camshaft components and measurements, installation instructions, and specifications for camshaft lobe lift.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    10 views3 pages

    Camshaft

    Uploaded by

    Harzanyi Maldonado
    The document provides specifications and technical details for camshafts used in 3500 Industrial Engines, including part numbers, illustrations of camshaft components and measurements, installation instructions, and specifications for camshaft lobe lift.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Service Information System Page 1 of 3

    Especificaciones
    3500 Industrial Engines
    Número de medio -SENR2351-12 Fecha de publicación -01/01/2013 Fecha de actualización -23/01/2013

    i01463993

    Camshaft
    SMCS - 1210

    Número de pieza - 4W-0474


    S/N - 71Z1-UP

    Número de pieza - 4W-1774


    S/N - 65Z1-UP

    Ver imagen

    23/02/2013 7:48:31
    Service Information System Page 2 of 3

    Illustration 1 g00295230
    Typical example

    (A) Direction toward the front of the engine.

    Ver imagen

    Illustration 2 g00295231

    (1) Washer

    Thickness of a new washer ... 8.50 ± 0.05 mm (0.335 ± 0.002 inch)


    Thickness of the groove in a new camshaft ... 8.75 ± 0.05 mm (0.344 ± 0.002 inch)
    End play for new camshafts ... 0.15 to 0.35 mm (0.006 to 0.014 inch)

    (2) Journal surface

    Diameter of surface (journals) for new camshaft bearings ... 85.88 ± 0.02 mm (3.381 ± 0.001
    inch)
    Bore in bearings for camshafts after assembly ... 86.00 ± 0.06 mm (3.386 ± 0.002 inch)

    (3) Dowel

    The dowel extends from the end of the rear right hand camshaft and the front left hand
    camshaft by the following value. ... 22.0 ± 0.5 mm (0.87 ± 0.02 inch)

    (4) Bolt

    Clean the threads of the bolts and the contact surfaces of the parts thoroughly.
    Hand tighten the bolts to the following torque. ... 55 ± 7 N·m (40 ± 5 lb ft)

    (6) Camshaft lobe height

    23/02/2013 7:48:31
    Service Information System Page 3 of 3

    In order to determine the height, use the procedure that follows:

    1. Measure camshaft lobe height (5) .

    2. Measure base circle (7) .

    3. Subtract the base circle (Step 2) from the lobe height (Step 1). The difference is the actual lobe
    lift.

    4. Specified camshaft lobe lift (6)

    Inlet lobe (8) ... 9.314 mm (0.3667 inch)

    Injector lobe (9) ... 13.574 mm (0.5344 inch)

    Exhaust lobe (10) ... 9.078 mm (0.3574 inch)

    Copyright 1993 - 2013 Caterpillar Inc. Sat Feb 23 07:48:20 EST 2013
    Todos los derechos reservados.
    Red privada para licenciados del SIS.

    23/02/2013 7:48:31

    You might also like