PEKERJAAN PEMBANGUNAN PEMASANGAN JALUR PIPA GAS DARI BENOA KE PLTG

PESANGGARAN - BALI Halaman 1+3 dari 5

Date
DATASHEET FOR
PEL-00-INS-DS-010 REV. 1 10/19/2015
FIRE AND GAS SYSTEM (GAS DETECTOR)
Page 5 of 14
ITEM DESCRIPTION
1 Tag Number See list below
2 Service See list below
3 Drawing Number See list below
GENERAL

4 Area Classification Zone 1, Gas Group IIA, Class Temperature T3

5 Combustible Gas Hydrocarbon gas (methane)
6 Enclosure Weathter proof IP 65, Explosion Proof Exd Zone 1, IIA, T3 ATEX certified
7 Humidity 64-87%
8 Ambient Temperature 75.2 - 91.4 ᵒF
9 Quantity 9 Ea
10 Instrument Type IR (Infra Red) Point Detector
11 Detection Pinciple Dual Wavelength (Note 4)
12 Output Signal Type 0-20 mA, Hart Proportional to 0-100% LEL (Note 4)
13 Sampling Method Note 4
14 Response Time Max. 5 s (Note 4)
15 Accuracy ± 3% from 0 to 50% LEL, ± 5% from 51 to 100% LEL (Note 4)
16 Enclosure Material 316 SS
17 Enclosure Color Coated with Red
18 Reset Automatic Self-reset
19 Power Supply 24 VDC
GAS DETECTOR

20 Cable Entry 3/4" NPTF (Note 4)

DETECTOR

21 Wiring 3 Wires for signal / Power

22 Detection Range 0-100 % LEL (Note 4)
23 Calibration Range 0-100 % LEL (Note 4)
24 Set Points / Alarm Low Alarm : 20% LEL & High Alarm : 60 % LEL (Note 4)
25 Output Mode Current (mA) LEL Signal Meaning
26 0 - Common Fault
27 2 - Optical Fault/Dirty
28 4 0% No Gas
29 7.2 20% Alarm 1
30 13.6 60% Alarm 2
31 20 100% Full Scale Detection
32 False Alarm Imunity Detector shall not produce an alarm indication greather than 10% LEL in response to water
33 or water vapour in optical path
34 Calibrated Yes, Continuous Self Test
OTHERS

35 Mounting Brackets and Bolting, 2" pipe mounting

36 Testing Certified test gas of approximately 50% of full scale methane should be provided (VTA)
37 Calibration / Interogation Tools Yes, Provided (Note 1)
38 Optic Protection UV Resistant
39 Manufacturer Vendor List
PURCHASE

40 Model VTA
41 Serial Number VTA
42
43
NOTE :
1 Vendor to furnish mounting bracket, calibration /interrogation tool.
2 Gas detector shall immune to RF interference, solar radiation, lighting, arc welding, and other source of radiation sudden tempersture change, etc
shall not affect to the operation of gas detector or provide common alarm.
3 The detector shall meet SIL 2 certified according to IEC 61508.
4 Vendor to advise (VTA).
5 Vendor to provide 316 SS name pate. The tag plate shall consist of information such as Tag Number, Services, Date of Manufacture, etc.
6 The Vendor shall guarantee the full compatibility and good functionality of their detectors with the selected FGS System.
7 Refer to Specification for Fire and Gas Detector (PEL-00-INS-SPC-003).

LIST OF GAS DETECTOR

No Tag Number Services Drawing Number

1 GD-BN001 Pig Launcher PL-001 Benoa Area PEL-00-INS-DW-011
2 GD-BN002 Pig Launcher PL-001 Benoa Area PEL-00-INS-DW-011
3 GD-PS001 Pig Receiver PR-001 Pesanggaran PEL-00-INS-DW-011
4 GD-PS002 Pressure Control Valve PCV-015 PEL-00-INS-DW-011
5 GD-PS003 Pressure Control Valve PCV-016 PEL-00-INS-DW-011
6 GD-PS004 Metering Area PEL-00-INS-DW-011
7 GD-PS005 Metering Area PEL-00-INS-DW-011
8 GD-PS006 FCV-M001B Metering Area PEL-00-INS-DW-011
9 GD-PS007 FCV-M001A Metering Area PEL-00-INS-DW-011
 PEKERJAAN PEMBANGUNAN PEMASANGAN JALUR PIPA GAS DARI
BENOA KE PLTG PESANGGARAN - BALI

Date
DATASHEET FOR
PEL-00-INS-DS-010 REV. 1 10/19/2015
FIRE AND GAS SYSTEM (SMOKE DETECTOR)
Page 6 of 14
ITEM DESCRIPTION
1 Tag Number See list below
GENERAL

2 Service See list below

3 Drawing Number See list below
4 Area Classification Non-Hazardous Area
5 Quantity 4 Ea
6 Instrument Type Photoelectric
7 Sensitivity Standard/Adjustable from Fire Alarm Panel (Note 4)
8 Area Classification Non-Hazardous Area
9 Power supply 24 V DC Loop powered.
10 Certification UL listed
11 Contact rating Rating: 2 A @ 24 VDC ,SPDT / DPDT (Note 4)
DETECTOR

Immune from Radio frequency, solar radiation, arc welding , lightning, electromagnetic
12 Immunity
interference and the like or Per Manufacturer Standard for UL/FM Approval Certification

The ionization chamber ionizes smoke particle in the chamber. It result in current that reflect
13 Detection principle
contain of the air (there was smoke or not)
SMOKE DETECTOR

14 Integral Alarm indication Red LED, LED remain illuminated until the Alarm condition has been reset
15 Supply wiring Two wire monitored supply
16 Detector/ Base connection B501BP
17 Cable entry 1/2 NPT (Note 4)
18
19 Tag Plate 316 SS material
Containing terminal for wiring, Blak box c/w base, screws, unit, etc suitable for surface mounting,
20 Electrical wiring Box
terminals: nickel plated Stainless Steel.
OPTIONS

21 End of line device Suitable for use with input module monitoring short and open circuit fault for specified tags
22 Test Kit One set of smoke detector aerosol provided to allow testing of the detectors
23 Filter Provided for each smoke detector to prevent small insect entering detector chamber
24 Intelligent Base Yes
25 Mounting Surface
26 Manufacturer Vendor List
27 Model Note 4
PURCHASE

28 Serial Number Note 4

29
30
31
32

NOTE :
1. Test Kit (Telescopic pole, smoke dispenser, smoke tester) and detector removal tools supplied by vendor.
2. Detecor compatible with Fire Alarm Panel.
3. Certified plug for the spare entries provided by vendor.
4. VTA (Vendor to Advise)

LIST :
No Tag Number Services Drawing Number
1 SD-PS001 Control Room PEL-00-INS-DW-011
2 SD-PS002 Battery Room PEL-00-INS-DW-011
3 SD-PS003 Electrical Room PEL-00-INS-DW-011
4 SD-PS004 Marshalling Room PEL-00-INS-DW-011
 PEKERJAAN PEMBANGUNAN PEMASANGAN JALUR PIPA GAS DARI
BENOA KE PLTG PESANGGARAN - BALI

Date
DATASHEET FOR
PEL-00-INS-DS-010 REV. 1 10/19/2015
FIRE AND GAS SYSTEM (SMOKE DETECTOR)
Page 6 of 14
 PEKERJAAN PEMBANGUNAN PEMASANGAN JALUR PIPA GAS
DARI BENOA KE PLTG PESANGGARAN - BALI

Date
DATASHEET FOR
PEL-00-INS-DS-010 REV. 1 10/19/2015
FIRE AND GAS SYSTEM (HEAT DETECTOR)
Page 7 of 14
ITEM DESCRIPTION
1 Tag Number See List
2 Service See List
GENERAL

3 Drawing Number See List

4 Area Classification Non-Hazardous
5 Application Detection of Heat Produced by Burning Substances
6 Quantity 2 Ea
7 Instrument Type Fixed and Rate of rise thermal detector - Addressable Heat Detector
8 Working Temperature 32ᵒF to 135ᵒF
9 Set Points Fixed : 135 degF. Rate rise : 15 degF/min (Note 6)
10 Power Supply 24 VDC (Loop Powered)
11 Switch Contact Rating 1A at 24VDC (Note 6)
DETECTOR

12 Intergral Alarm Indication Built in Alarm Indicator (RED LED)

13 Detector/Base Connection Plug in type (gold Plate Contacts)
14 Sensitivity Standard/Adjustable from Fire Alarm Panel
HEAT DETECTOR

Radio Frequency Immunity

15 Immune from Radio frequency, solar radiation, arc welding lightning and the like
/Electrocmagnetic compatibility

16 Certifification UL listed
17 Auto reset Yes, provided
18
19 Mounting Base Inteligent Mounting base compatible with Alarm Panel
ACCESSORIES /

20 Tag Plate 316 SS material

OPTIONS

21 Manufacturer VTA
22 Model VTA
23 Mounting Surface
24
25
26 Manufacturer Vendor List
27 Model Note 6
PURCHASE

28 Serial Number Note 6

29
30
31
32

Note :
1 Test Kit (Telescopic pole, smoke dispenser, smoke tester) and detector removal tools supplied by vendor.
2 Applicable Specification for Fire and Gas Detector (PEL-00-INS-SPC-003)
3 Detector have been compatible with Fire Alarm Panel.
4 LED for Alarm condition remain illuminated until the alarm condition has been reset.
5 The proper material suitable for indoor/room environment confirmed by vendor.
6 VTA (Vendor to Advise)

LIST OF HEAT DETECTOR

No Tag Number Services Drawing Number

1 HD-PS001 Battery Room PEL-00-INS-DW-011
2 HD-PS002 Electrical Room PEL-00-INS-DW-011
 PEKERJAAN PEMBANGUNAN PEMASANGAN JALUR PIPA GAS
DARI BENOA KE PLTG PESANGGARAN - BALI

Date
DATASHEET FOR
PEL-00-INS-DS-010 REV. 1 10/19/2015
FIRE AND GAS SYSTEM (HEAT DETECTOR)
Page 7 of 14
 PEKERJAAN PEMBANGUNAN PEMASANGAN JALUR PIPA GAS DARI
BENOA KE PLTG PESANGGARAN - BALI

Date
DATASHEET FOR
PEL-00-INS-DS-010 REV. 1 10/19/2015
FIRE AND GAS SYSTEM (FLAME DETECTOR)
Page 8 of 14
ITEM DESCRIPTION
1 Tag Number See List
2 Quantity 2 Ea
3 Service See List
GENERAL

4 Drawing Number See List

5 Area Classification Zone 1, Group IIA, T3
6 Humidity 64-87%
7 Ambient Temperature 75.2 - 91.4 ᵒF
8 Application Detection of Burning Substances
9
Microprocessor based, Infra Red (IR) fire Detector, 4-20 mA Output, multi spectrum,
10 Type
High rejection of false alarms
11 Power supply 24 VDC
Range and Cone of Vision angle*
12 (* 1 sq ft of n- Heptane fire at high Range detection 1 f2 @ 80 feet, max detection 120ᵒCone, (Note 4)
sensitivity)
13 Response time < 1 sec
14 Spectral sensitivity range 2 - 5 microns IR (Note 4)
15 Optical filter Yes
Test and Continuous Optical Monitoring
16 (COPM) Yes
DETECTOR

17 Output 0-20 mA HART

FLAME DETECTOR

Fault: 0-0.2 mA, Test mode: 1.5 mA, COPM Fault: 2 mA, Normal: 4.3 mA
18 Alarms
Warn: 16 mA, Alarm: 20 mA (± 0.2 mA)
Radio Frequency and False Alarm Immune from Radio frequency, solar radiation, arc welding and lightning, maximum
19
Immunity false alarm rejection
20 Monitoring Remote F&G system (By others)
21 Status indicator LED
22 No of wires 3 wire system
23 Cable type and Cores 16 AWG Twisted - shielded pair
24 Cable Entry 3/4 inch NPT (Note 3,4)
25 Terminal Box Yes
26 Surge protection Yes
27 Power consumption 20-36 VDC
28 Enclosure Weather proof: IP 65,Explosion proof : Ex (d) Zone 1, IIA ,T3
Include Ni Cad Battery, Charger, Low Level Handle, Extension Pole, and spare bulb
29 Test Kit
ACCESSORIES /

with battery
OPTIONS

30 Tag Name Plate Material 316 SS

31 Mounting Stainless steel 316 swivel bracket, 2" Pipe mounting stanchion
32 Case Stainless steel 316
33
34
35 Manufacturer Vendor List
36 Model Note 4
PURCHASE

37 Serial Number Note 4

38
39
40
41

Note :
1. Vendor supplied calibrating IR Touch / source.
2. Applicable Specification for Fire and Gas Detector (PEL-00-INS-SPC-003)
3. Spare entries provided with certified plugs.
4. Vedor to complete verify or specify.
5. The Sensitivity shall not effect by arc welding, lightning, sunlight, artificial light or heated object.
6. Detector shall have capability of detecting fire through surface level lens contamination e.g. dust, oil, or water spray.

LIST OF FLAME DETECTOR

No Tag Number Services Drawing Number

1 FD-PS001 Metering Area PEL-00-INS-DW-011
2 FD-PS002 Metering Area PEL-00-INS-DW-011
 PEKERJAAN PEMBANGUNAN PEMASANGAN JALUR PIPA GAS DARI
BENOA KE PLTG PESANGGARAN - BALI

Date
DATASHEET FOR
PEL-00-INS-DS-010 REV. 1 10/19/2015
FIRE AND GAS SYSTEM (FLAME DETECTOR)
Page 8 of 14
 JASA KONSULTASI ENGINEERING
FRONT END ENGINEERING DESIGN (FEED) PROYEK
PEMBANGUNAN FASILITAS CBM DAN PIPELINE DI TBBM
AMPENAN

No. Dokumen :
Halaman 4 dari 5
AMP-DS-40-005-A4

DAFTAR ISI

No. Judul Halaman Catatan

1 SAMPUL 1
2 TABEL REVISI 2
3 REKAMAN REVISI 3
4 DAFTAR ISI 4
5 DATASHEET 5
 JASA KONSULTASI ENGINEERING FRONT END ENGINEERING DESIGN (FEED)
PROYEK PEMBANGUNAN FASILITAS CBM DAN PIPELINE DI TBBM AMPENAN

No. Dokumen :
Halaman 5 dari 5
AMP-DS-40-005-A4

1 Tag Name EPB-001

2 Service Pig Receiver Area
3 Certification UL/FM, Water Proof and Explosion Proof
General 4 Area Classification Zone 1, Gas Group IIA, T3
5 Installation Location Outdoor
6 Application Manual Abort the agent discharge during any failure system
7
8 Type Mushroom Pushbutton, Latching
EMERGENCY PUSH BUTTON

9 Operating Voltage 220 VAC

10 Operator Action Latching , Pull to Release
11 Material 316L Stainless Steel (*)
Specification
12 IP Rating IP 66
13 Working Temperature -10 ᵒC to +55 ᵒC
14 Enclosure Protection Eex"d"
15
16 Mounting (*)
17 Manufacture (*)
Accesorries
18 Model No (*)
19
20 Manufacture Vendor List
21 Model (*)
22 Purchase Order Number (*)
Purchase
23 Item Number (*)
24 Serial Number (*)
25

Note :
(*) Vedor to Advise/Verify.
1. Manufacture shall presented in vendor list Company Approval.
2. A316 SS name plate have permanently attached. The name plate show the tag number, range, serial number and
year of manufacturer as a minimum.