PI2794

PI-010-REA01-MFRKG/US/ /P Pressure sensors

1: 4-digit alphanumeric display

2: LEDs
3: Programming button
Made in Germany

Product characteristics
Combined pressure sensor
Connector
Process connection: G 1 A / Aseptoflex Vario
Display units:
bar, psi, MPa, % of the span
Function programmable
2-wire connection technology:
analogue output
3-wire connection technology:
2 outputs
OUT1 = switching output
OUT2 = switching output or analogue output
4-digit alphanumeric display
Measuring range: -1.00...10.00 bar / -14.5...145.0 psi / -0.100...1.000 MPa
Application
Application Type of pressure: relative pressure
Hygienic systems, viscous media and liquids with suspended particles
Liquids and gases
Pressure rating 50 bar 725 psi 5 MPa
Bursting pressure min. 150 bar 2175 psi 15 MPa
MAWP (for applications according to
CRN) 50 bar 725 psi 5 MPa
Medium temperature [°C] -25...125 (145 max. 1h)
Electrical data
Electrical design 2 wires DC / 3 wires DC PNP/NPN
Operating voltage [V] 20...32 DC (2L) / 18...32 DC (3L)
Current consumption [mA] 3.6...21 (2L) / < 45 (3L)
Insulation resistance [MΩ] > 100 (500 V DC)
PI2794
PI-010-REA01-MFRKG/US/ /P Pressure sensors

Protection class III

Reverse polarity protection yes
Outputs
Output 2-wire connection technology:
analogue output
3-wire connection technology:
2 outputs
OUT1 = switching output
OUT2 = switching output or analogue output
Output function 1 x normally open / normally closed programmable + 1 x normally open / normally
closed programmable or 1 x analogue (4...20 / 20...4 mA, scalable)
Current rating [mA] --- (2L) / 250 (3L)
Voltage drop [V] --- (2L) / < 2 (3L)
Short-circuit protection pulsed
Overload protection yes
Switching frequency [Hz] --- (2L) / 125 (3L)
Analogue output I: 4...20 mA (Ineg: 20...4 mA)
Max. load [Ω] 300 (2L) / max. (Ub - 10 V) x 50 (3L)
Measuring / setting range
Measuring range -1.00...10.00 bar -14.5...145.0 psi -0.100...1.000 MPa
Setting range
Set point, SP -0.98...10.00 bar -14.2...145.0 psi -0.098...1.000 MPa
Reset point, rP -1.00...9.98 bar -14.5...144.7 psi -0.100...0.998 MPa
Analogue start point, ASP -1.00...7.50 bar -14.5...108.7 psi -0.100...0.750 MPa
Analogue end point, AEP 1.50...10.00 bar 21.8...145.0 psi 0.150...1.000 MPa
in steps of 0.01 bar 0.1 psi 0.001 MPa
Factory setting SP1 = 2.50 bar; rP1 = 2.30 bar
SP2 = 7.50 bar; rP2 = 7.30 bar
ASP = 0.00 bar; AEP = 10.00 bar
Accuracy / deviations
Accuracy / deviations
(in % of the span) Turn down 1:1
Switch point accuracy < ± 0.2
Characteristics deviation *) < ± 0.2
Linearity < ± 0.15
Hysteresis < ± 0.15
Repeatability **) < ± 0.1
Long-term stability ***) < ± 0.1
Temperature coefficients (TEMPCO) in the temperature range 0...70° C (in % of the span per 10 K)
Greatest TEMPCO of the zero point < ± 0.05
Greatest TEMPCO of the span < ± 0.15
Reaction times
Power-on delay time [s] 1 (2L) / 0.5 (3L)
Min. response time switching
output [ms] --- (2L) / 3 (3L)
Damping for the switching output
(dAP) [s] 0.00...30.00
Damping for the analogue output
(dAA) [s] 0.01...99.99
PI2794
PI-010-REA01-MFRKG/US/ /P Pressure sensors

Step response time analogue

output [ms] 45 (2L) / 7 (3L)
Integrated watchdog yes
Interfaces
IO-Link Device
Transfer type COM2 (38.4 kBaud)
IO-Link revision 1.0
IO-Link Device ID 157 d / 00 00 9D h
Profiles no profile
SIO mode yes
Required master port type A
Process data analogue 1
Process data binary 2
Min. process cycle time [ms] 2.3
Environment
Ambient temperature [°C] -25...80
Storage temperature [°C] -40...100
Protection IP 67 / IP 68 / IP 69K
Tests / approvals
EMC DIN EN 61000-6-2
DIN EN 61000-6-3
Shock resistance DIN EN 60068-2-27: 50 g (11 ms)
Vibration resistance DIN EN 60068-2-6: 20 g (10...2000 Hz)
MTTF [Years] 160
Mechanical data
Process connection G 1 A / Aseptoflex Vario
Materials (wetted parts) ceramics (99.9 % Al2 O3); PTFE; stainless steel 316L / 1.4435; surface
characteristics: Ra < 0.4 / Rz 4
Housing materials stainless steel 316L / 1.4404; FPM; PTFE; PBT; PEI; PFA
Switching cycles min. 100 million
Weight [kg] 0.313
Displays / operating elements
Display Display unit LED green
Switching status LED yellow
Function display 4-digit alphanumeric display
Measured values 4-digit alphanumeric display
Electrical connection
Connection M12 connector; Gold-plated contacts
Wiring
PI2794
PI-010-REA01-MFRKG/US/ /P Pressure sensors

1 connection for 2-wire operation

2 connection for 3-wire operation
3 connection for IO-Link parameter setting (P = communication via IO-Link)
Remarks
Remarks (2L) = value for 2-wire operation
(3L) = value for 3-wire operation
*) linearity, incl. hysteresis and repeatability;
(limit value setting to DIN 16086)
**) with temperature fluctuations < 10 K
***) in % of the span per year
Pack quantity [piece] 1
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — GB — PI2794 — 16.04.2013